Release Notes for Cisco ASR 9000 Series Routers, IOS XR Release 7.10.1
IOS XR 64-bit on Cisco ASR 9000 Series is the next generation operating system running in a virtualized environment with an underlying 64-bit Linux kernel. Cisco IOS XR operating system delivers greater agility, automation, and simplicity while reducing the cost of operating the networks.
References
For more information about Cisco ASR 9000 Series, see:
What's New in Cisco IOS XR Release 7.10.1
For more details on the Cisco IOS XR release model and associated support, see Software Lifecycle Support Statement - IOS XR.
Software Features Enhanced and Introduced
To learn about features introduced in other Cisco IOS XR releases, select the release from the Documentation Landing Page.
| Feature | Description |
|---|---|
|
Programmability |
|
|
The OpenConfig data models provide a structure for managing networks via YANG protocols. With this release, enhancements to the configuration architecture improve input validations and ensure that the Get requests made through gNMI or NETCONF protocols return only explicitly configured OpenConfig leaves. |
|
|
You can now prevent the partially-committed configurations on the router and thus ensure the system database and OpenConfig datastore stay in sync. This feature changes how the internal rollback error is handled when a pseudo-atomic commit fails. In such cases, the system database always rolls back the configuration in its datastore thereby ensuring that there is no partially-committed configuration. If there is still inconsistency, the system displays error messages to notify you of various internal rollback failure scenarios based on which you must take rectification action to re-synchronize the data. |
|
|
Cloud Native BNG User Plane |
|
|
You can now configure IPv6 Neighbor Discovery (ND) parameters on the access interface that facilitates address resolution, router discovery, and duplicate address detection. The IPv6 ND protocol discovers and establishes communication with neighboring IPv6 nodes within a local network. This feature introduces the following changes:
|
|
|
Routing |
|
|
Autonomous System Boundary Router Isolation and Adjacency Control for LSA Overflows |
In a network employing an Autonomous System Boundary Router (ASBR) and other routers, you are now assured of uninterrupted traffic flow even if the ASBR generates LSAs that exceed the limit you configured. This is made possible as you can now isolate ASBRs and also control the duration of adjacency in the EXCHANGE or LOADING phase. By isolating the ASBR from its immediate neighbors, the remaining network topology can continue to function without disruption, effectively preventing any adverse impact on traffic flow. This approach also simplifies the recovery process, as manual intervention is only necessary for the immediate neighbors of the ASBR routers. This feature introduces these changes: CLI: YANG Data Model:
(see GitHub, YANG Data Models Navigator) |
|
EIBGP Policy-Based Multipath with Equal Cost Multipath and Default VRF |
Now, with the inclusion of the default VRF in policy-based multipath selection, you gain control over traffic distribution and load-balancing capabilities across various BGP variations, including iBGP, eBGP, and eiBGP. This is achieved through the utilization of BGP communities, nexthops, and path types. Additionally, by employing the equal cost multipath (ECMP) option in eiBGP, this feature provides the capability to select ECMP across the iBGP paths chosen for eiBGP. The feature introduces these changes: CLI: The keywords route-policy and equal-cost are added to the command: YANG Data Model:
(see GitHub, YANG Data Models Navigator) |
|
We have enabled better label space management and hardware resource utilization by making MPLS label allocation more flexible. This flexibility means you can now assign these labels to only those routes that are advertised to their peer routes, ensuring better label space management and hardware resource utilization. Prior to this release, label allocation was done regardless of whether the routes being advertised. This resulted in inefficient use of label space. |
|
|
Protection of Directly connected eBGP neighbors through Interface-based LPTS Identifier |
We have enhanced the network security for directly connected eBGP neighbors by ensuring that only packets originating from designated eBGP neighbors can traverse through a single interface, thus preventing IP spoofing. This is made possible because we've now added an interface identifier for Local Packet Transport Services (LPTS). LPTS filters and polices the packets based on the type of flow rate you configure. The feature introduces these changes: CLI: YANG Data Model:
|
|
Segment Routing |
|
|
Configurable Filters for IS-IS Advertisements to BGP-Link State |
This feature allows you to configure a route map to filter IS-IS route advertisements to BGP-Link State (LS). It also provides a per-area configuration knob to disable IS-IS advertisements for external and propagated prefixes. This configuration of filters hence reduces the amount of redundant data for external and interarea prefixes sent to the BGP - LS clients. The feature introduces exclude-external , exclude-interarea , and route-policy name optional keywords in the distribute link-state command. |
|
This feature allows Dynamic Tree Segment Identifier (Tree-SID) deployment where IPv6 Multicast payload is used for optimally transporting IP VPN multicast traffic over the provider network, using SR-PCE as a controller. This implementation supports IPv6 only for the Dynamic Tree-SID. Currently, the Static Tree-SID supports IPV4 payloads only, not the IPv6 payloads. |
|
|
Starting from this release, Multicast Nonstop Forwarding supports Tree-SID (Tree Segment Identifier). This ensures that traffic forwarding continues without interruptions whenever the active RSP fails over to the standby RSP. This feature prevents hardware or software failures on the control plane from disrupting the forwarding of existing packet flows through the router for Tree-SID. Thus, ensuring improved network availability, network stability, preventing routing flaps, and no loss of user sessions while the routing protocol information is being restored. The feature modifies the show mrib nsf private command. |
|
|
BGP- Link State (LS) is a mechanism by which LS and Traffic Engineering (TE) information can be collected from networks and shared with external components (such as, Segment Routing Path Computation Element (SR-PCE) or Crossword Optimization Engine (COE)) using the BGP routing protocol. The feature gathers the Traffic Engineering Policy information that is locally available in a node and advertises it into BGP-LS updates. The operators can now take informed decisions based on the information that is gathered on their network's path computation, reoptimization, service placement, network visualization, and so on. The feature introduces these changes: CLI: YANG Data Model:
|
|
|
SR-Multicast: Tree-SID Label Range Validation in North-Bound API |
The SR-PCE provides a north-bound HTTP-based API to establish communication between the SR-PCE and the Cisco Crosswork Optimization Engine. This release adds support for the following:
For more information, refer to the Cisco Crosswork Optimization Engine User Guides. |
|
You can now enable the router to record the number of bytes transmitted on a specific egress interface for IPv6 traffic using the SRv6 locator counter. You can use this data to create deterministic data tools to anticipate and plan for future capacity planning solutions. This feature introduces or modifies the following changes: CLI: YANG Data Models:
(see GitHub, YANG Data Models Navigator) |
|
|
MPLS |
|
|
You can now enable the router to collect only the per-prefix statistics, that is, the aggregate statistics for all paths available for a destination prefix. This helps conserve the hardware resources of the router. In earlier releases, there was no option to disable per-path statistics collection. The router collected both per-prefix statistics and per-path statistics for each destination prefix. When there were multiple paths for a destination prefix, the router required much more hardware resources to store the per-path statistics. This feature introduces these changes: CLI: YANG Data Model:
|
|
|
We have optimized network performance and enabled efficient utilization of resources for numbered tunnels based on real-time traffic by automatically adding or removing tunnels between two endpoints. This is made possible because this release introduces support for auto-bandwidth TE++ for numbered tunnels, expanding upon the previous support for only named tunnels, letting you define explicit paths and allocate the bandwidth to each tunnel. The feature introduces these changes:
|
|
|
Broadband Network Gateway |
|
|
We've now made the resolution of DNS queries faster by including the DNS server information in the IPv6 Neighbor Discovery (nd) Router Advertisement (RA) for PPPoE subscribers. We've enabled the transmission of DNS information to devices that don't support DHCP thus expanding the scope of address resolution beyond DHCP-broadcasting. This feature introduces the following changes:
|
|
|
Interface and Hardware Component |
|
|
Cyclic Redundancy Check (CRC) based Bit Error Ratio (BER) measures the error rate in a received message by dividing the number of errors by the total number of bits transmitted. This metric allows you to evaluate the performance of the communication system and ensure the integrity of transmitted data. A high BER indicates a higher rate of errors and potential issues with the communication system, whereas a low BER indicates a high-quality system with minimal errors. This release extends CRC-based BER support for the following line cards:
|
|
|
This release introduces the support to disable the laser squelching. By disabling laser squelch, you can detect weak signals embedded within the laser source noise and simultaneously reduce processing overhead in systems with stable laser sources and minimal noise. When laser squelch is enabled, the system shuts down the laser in case of an Optical Transport Network (OTN) failure. The feature introduces these changes: CLI:
YANG DATA models:
|
|
|
Small frame padding prevents packet drops caused by network congestion. If the minimum frame size requirement isn’t met, the frames drop, this enhancement ensures that your hardware ASIC adds extra bytes to the payload, thereby fulfilling the 68-byte minimum frame size requirement. By doing so, small frame padding significantly enhances network reliability and minimizes the risk of dropped frames due to congestion-related issues. Previously, this feature was supported on the second and third generations of the ASR 9000 Series Ethernet line cards. Starting from this release, we extend this feature support to the fourth and fifth generations of the ASR 9000 Series Ethernet line cards. |
|
|
With this release, the support for DP04QSDD-HE0 optical module is extended to the following hardware:
|
|
|
Multicast |
|
|
With Dynamic Source-Specific Multicast (SSM) Translation, the router with BGP C-multicast routing, will now be able to avoid or prevent sending duplicate packets from the RP-PE (Rendezvous Point–Provider Edge) to all receiver PE nodes. This feature reduces the consumption of hardware resources by not programming (*, G) entries in the forwarding tables, and also avoids sending duplicate packets on PE nodes and eases debugging. The feature introduces these changes: CLI:
YANG Data Model: New XPath for:
(see Github, YANG Data Models Navigator) |
|
|
Netflow |
|
|
During the transition from conventional IP/MPLS networks to SRv6-based networks, the necessity for monitoring SRv6 traffic flow becomes crucial. This feature enables IPFIX to effectively monitor SRv6 IP traffic flow from network devices. The feature introduces these changes: CLI:
The srv6 keyword is supported on fourth generation and later ASR 9000 Series High Density Ethernet line cards. |
|
|
This feature introduces support for simultaneous L2 and L3 flow monitoring. Now, you can configure IP Flow Information Export (IPFIX) to actively monitor and record end-to-end L2 and L3 flow information elements from network devices. Previously, only L2 or L3 flow could be monitored at a time. The feature introduces these changes: CLI:
The l2-l3 keyword is supported on fourth generation and later ASR 9000 Series High Density Ethernet line cards. |
|
|
You can now monitor traffic from a specific source by configuring the sFlow agent ID with the specific IPv4 or IPv6 address. Upon configuration, you can determine the source of the sFlow data. Earlier, by default, the sFlow agent ID had the source address of the sFlow export packet. The feature introduces these changes: CLI New Command: Modified Command:
YANG Data Model
|
|
|
L2VPN and Ethernet Services |
|
|
The EVPN port-active mode configuration is now modified to support hot standby. In a hot standby bundle interface, the main and subinterfaces remain up. This functionality ensures fast convergence of standby to active transition. Previously, the interfaces in a standby node would be down. During the failure and recovery of active node, the standby node transitions through the Out-of-Service (OOS) state to the Up state. If you still want the nodes to transition through the OOS state, use the access-signal out-of-service command to revert to the previous behavior. The feature introduces these changes: CLI: YANG Data Model:
|
|
|
The maximum number of Ethernet Flow Points (EFPs) that can be added to a bundle interface is now enhanced to 40960 (40K). This greatly improves the flexibility to manage the traffic with different EFP filters. Note
|
|
|
You can now facilitate optimal traffic load balancing across the Virtual Network Forwarders (VNFs) and minimize control plane updates when the VNFs or virtual machines (VMs) are moved across Top of Racks (ToR) by setting the EVPN gateway IP address in the EVPN route type 5 network layer reachability information (NLRI) that advertises IPv4 and IPv6 addresses. With this functionality, only one IP prefix route is withdrawn ensuring fast traffic switchover and reduced convergence time in the event of failure. Previously, the gateway IP address field in the EVPN route type 5 NLRI was not used. By default, the NLRI advertisement included the EVPN gateway IP address of zero, which was represented as 0.0.0.0 for IPv4 and :: for IPv6. This resulted in the withdrawal of all prefixes one by one in the event of a failure, leading to traffic loss. The feature introduces these changes: CLI: |
|
|
System Security |
|
|
Display Username for Failed Authentication for Telnet Protocols |
With this feature, we have enhanced the security of the routers and introduced better tracking functionality to the router. The failed authentication sys log now displays the details of users who tried to log in but failed due to authentication failure. With this feature provisioned, the router can now display the user ID of both SSH and Telnet protocols. In earlier releases, this feature was available only for SSH protocol. This feature introduces the following change: CLI: aaa display-login-failed-users . YANG DATA Model: New XPaths for |
|
Multi-Tier Certificate Authority for Trustpoint Authentication |
Apart from the root certificate authority (CA), you can now use a subordinate CA to issue certificates and authenticate your network devices. This feature is beneficial when you have an existing CA hierarchy where it is not the root CA but the subordinate CA that issues the leaf or router certificates. In earlier releases, you could associate only a single CA, not a multi-tier CA, to a trustpoint. And, you could use only the root CA certificate to enroll the router certificates. This feature modifies the show crypto ca certificates command to display the Trusted Certificate Chain field. |
|
Public Key-Based Authentication of SSH Clients on Cisco IOS XR Routers |
You are now assured of cryptographic strength even as you avail of automated password-less login while establishing SSH connections with the server. With the password and keyboard-interactive authentication, Cisco IOS XR routers configured as SSH clients now support public key-based authentication. In this authentication method, passwords need not be sent over the network; hence, it provides an additional layer of security and aids in automation processes. This feature is available only for users locally configured on the router; not those configured on remote servers. Previous releases supported SSH public key-based authentication only for Cisco IOS XR routers configured as SSH servers. The feature introduces these changes:
|
|
We have now enabled Secure Key Integration Protocol (SKIP), a key-exchange protocol, on your routers to ensure a long-term secure MACsec. This is made possible because the SKIP protocol facilitates communication with external quantum devices, thereby enabling your routers to use Quantum Key Distribution (QKD) to create and transmit secure MACsec keys. Using QKD overcomes a critical problem in a post-quantum world where the current cryptographic systems are no longer secure due to the advent of quantum computers. This feature introduces these changes:
|
|
|
System Management |
|
|
You can now track an object (for example, an interface) and configure to error-disable a loopback interface when the tracked object state changes. This is beneficial when the loopback interface is the source of multiple tunnels and all tunnels need to be brought down simultaneously. Earlier, you couldn't error-disable loopback interface. |
|
|
PTP Class B support on A99-400GE-SE/TR and A99-10X400GE-XSE/TR |
Based on the IEEE 1588-2008 standard, Precision Time Protocol (PTP) is a protocol that defines a method to synchronize clocks in a network for networked measurement and control systems. With this release, PTP Class B performance is now supported on the following platforms:
|
|
General Administration |
|
|
Auto-Save and Copy Router Configuration Using Public Key Authentication |
You can now experience passwordless authentication while automatically saving running configurations and securely copying them on the router. The feature uses public key-based authentication, a secure logging method using a secure shell (SSH), which provides increased data security. This feature offers automatic authentication and single sign-on benefits, which also aids in a secure automation process. This feature modifies configuration commit auto-save and copy command to support password-less authentication. |
|
System Monitoring |
|
|
You can now assign a facility number per remote syslog server, which the system inherits to calculate the priority value of the syslog messages sent. You can also configure the source address to choose the interface to send remote syslog packets per remote server. The feature introduces these changes: CLI:
YANG Data Models:
|
|
| Feature | Description |
|---|---|
|
General Administration on Cisco ASR 9000 Series Routers, Cisco IOS XR Releases |
|
|
Auto-Save and Copy Router Configuration Using Public Key Authentication |
You can now experience passwordless authentication while automatically saving running configurations and securely copying them on the router. The feature uses public key-based authentication, a secure logging method using a secure shell (SSH), which provides increased data security. This feature offers automatic authentication and single sign-on benefits, which also aids in a secure automation process. This feature modifies configuration commit auto-save and copy command to support password-less authentication. |
YANG Data Models Introduced and Enhanced
This release introduces or enhances the following data models. For detailed information about the supported and unsupported sensor paths of all the data models, see the Github repository. To get a comprehensive list of the data models supported in a release, navigate to the Available-Content.md file for the release in the Github repository. The unsupported sensor paths are documented as deviations. For example, openconfig-acl.yang provides details about the supported sensor paths, whereas cisco-xr-openconfig-acl-deviations.yang provides the unsupported sensor paths for openconfig-acl.yang on Cisco IOS XR routers.
You can also view the data model definitions using the YANG Data Models Navigator tool. This GUI-based and easy-to-use tool helps you explore the nuances of the data model and view the dependencies between various containers in the model. You can view the list of models supported across Cisco IOS XR releases and platforms, locate a specific model, view the containers and their respective lists, leaves, and leaf lists presentedvisually in a tree structure.
To get started with using data models, see the Programmability Configuration Guide for ASR 9000 Series Routers.
| Feature | Description |
|---|---|
|
Programmability |
|
|
Cisco-IOS-XR-accounting-cfg |
We have introduced this Cisco native data model to enable the router to record the amount of data transmitted between every pair of network routers using the SRv6 locator counter. |
|
Cisco-IOS-XR-fib-common-oper |
We have modified this Cisco native data model to view SRv6 locator counters. |
|
Cisco-IOS-XR-segment-routing-ms-cfg |
We have modified this Cisco native data mode for you to define the SRv6 policies and segment list. |
|
Cisco-IOS-XR-crypto-act.yang |
The following new leaves are added to this Cisco native data model to enable public key-based authentication of users on Cisco IOS XR routers that are configured as SSH clients:
|
|
Cisco-IOS-XR-crypto-cepki-new-oper.yang |
A new container, |
|
Cisco-IOS-XR-um-hw-module-l3-cfg.yang |
The |
|
Cisco-IOS-XR-l2vpn-cfg.yang |
This Cisco native data model is enhanced to support EVPN port-active with hot standby on bundle interfaces. |
|
Cisco-IOS-XR-um-aaa-task-user-cfg |
A new container, |
|
openconfig-ospfv2.yang Version 0.4.0 |
The OpenConfig data model is introduced as part of the openconfig-network-instance.yang data model to configure OSPF functionalities, such as multiple processes, areas, and interfaces. Event-driven telemetry and Model-driven telemetry are not supported. |
|
openconfig-bgp-neighbor.yang Version 9.1.0 |
With this release, the OpenConfig data model introduces the following changes:
Event-driven telemetry and Model-driven telemetry are supported. |
|
openconfig-system-logging.yang Version 0.3.1 |
The OpenConfig data model defines configurations for common logging facilities on network systems. The model is updated with the following XPaths: openconfig-system/logging/
You can use the configured facility to calculate the priority field of the remote syslog packet and use the configured source-address to choose the interface to send remote syslog packets. Model-driven telemetry and Event-driven telemetry is not applicable. |
|
openconfig-sampling-sflow.yang Version 1.1.0 |
The OpenConfig data model defines the sampling mechanisms implemented in an sFlow agent for monitoring traffic. This data model augments the openconfig-sampling.yang model. The model is revised from version 0.1.0 to 1.0.0 with the following XPaths:
Model-driven telemetry is supported. |
|
openconfig-telemetry.yang Version 0.5.1 |
The OpenConfig data model is revised from version 0.2.0 to 0.5.1 to support the two leaves encoding and protocol. This allows the selection of the transport protocol for the telemetry stream and the selection of specific encoding for telemetry messages to and from the network element. You can now get the leaf data using Netconf or gNMI requests from the router. Event-driven telemetry and Model-driven telemetry are supported. |
|
openconfig-aft.yang Version 0.6.0 |
The Abstract Forwarding Table (AFT) OpenConfig data model is enhanced to stream telemetry data for conditional next-hop groups (CNHG) to provide DSCP information per prefix and list of input interfaces. This model helps to monitor the DSCP-based policy routing configuration at the forwarding layer. The Abstract Forwarding Table (AFT) OpenConfig data model is enhanced to support the following features:
Model-driven telemetry and Event-driven telemetry are supported. |
|
Cisco-IOS-XR-infra-xtc-agent-cfg.yang |
This Cisco native data model is used for gathering statistics on reporting of SR-Traffic Engineering (TE) policies using BGP-Link State (LS). |
|
Cisco-IOS-XR-um-multicast-routing-cfg |
This Cisco unified data model is enhanced with a new leaf, dynamic-ssm-translation, to configure Dynamic Source-Specific Multicast (SSM) Translation.
|
|
Cisco-IOS-XR-um-router-pim-cfg |
This Cisco unified data model is enhanced with a new leaf, |
|
openconfig-system-grpc.yang Version 1.0.0 |
The OpenConfig data model is revised from version 0.1.1 to 1.0.0. This version enables the gRPC server to listen on any IP address bound to an interface and port of the system or listen for any specific list of IP addresses. The maximum number of supported IP addresses are 32, which may be IPv4 or IPv6, or both. Earlier, the gRPC server had the listen functionality for any IP address on the gRPC port but not to a specific list of listen addresses. Event-driven telemetry and Model-driven telemetry are supported. |
Deprecated features
Starting with Cisco IOS XR release 7.10.1, the performance-measurement {delay-profile | liveness-profile} {sr-policy | endpoint | interface} name name CLI is deprecated. Old configurations stored in NVRAM will be rejected at boot-up. As a result, performance measurement delay and liveness named profiles using the old CLI must be re-configured using the performance-measurement {delay-profile | liveness-profile} name name CLI.
 Note |
The default performance measurement delay and liveness profiles configured using the performance-measurement { delay-profile | liveness-profile} { sr-policy | endpoint | interface} default commands are still valid and unaffected. |
For more information, see CLI Changes for Segment Routing Performance Measurement section under the Link Delay Measurement topic in Segment Routing Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 7.10.x.
Caveats
|
Bug ID |
Headline |
|---|---|
|
EVPN VPWS down post migrating from Multi-homing to Single-Homing. |
|
|
Netflow IPv6: The record-ipv6 reports incorrect interfaces with outbundlemember or outphysint options |
|
|
Interfaces statistics are getting delayed for few seconds. |
Behavior Changes
Starting with Cisco IOS XR Software Release 7.10.1, you must configure a name server for Smart Licensing deployment options that use HTTPS for communication with Cisco Smart Software Manager (CSSM). If the system cannot validate that the Common Name (CN) in the X.509 server certificate is a Fully Qualified Domain Name (FQDN), communication with CSSM results in an Error during SSL communication. See the Smart Licensing Chapter in the System Management Configuration Guide for ASR 9000 Series Routers for more information and options to bypass the name server configuration.
Supported Packages and System Requirements
Feature Set (Software Images)
Visit the Cisco Software Download page to download the Cisco IOS XR software.
Cisco IOS XR 64 bit
This table lists the feature set matrix (ISO and RPM files) and associated filenames available for the Cisco IOS XR 64 bit 7.10.1 Release supported on the Cisco ASR 9000 Series Aggregation Services Router.
|
Feature Set |
Filename |
Description |
|---|---|---|
|
Cisco IOS XR IP/MPLS Core Software [for RSP and RP systems] |
ASR9K-x64-iosxr-px-7.10.1.tar |
|
|
Cisco IOS XR IP/MPLS Core Software 3DES [for RSP and RP systems] |
ASR9K-x64-iosxr-px-k9-7.10.1.tar |
|
|
Cisco IOS XR IP Unicast Routing Core Bundle and Migration to IOS XR 64 bit tar image |
asr9k-mini-x64-migrate_to_eXR.tar-7.10.1 |
Contains the required core packages, including OS, Admin, Base,Forwarding, Modular Services Card, Routing, FPD, SNMP Agent, and Alarm Correlation. Contains mini.iso file for XR 64 bit 7.10.1 and additional software for migration to 64 bit. |
|
Composite Package |
||
|
Feature Set |
Filename |
Description |
|
Cisco IOS XR IP Unicast Routing Core Bundle |
asr9k-mini-x64-7.10.1.iso |
Contains the required core packages, including OS, Admin, Base,Forwarding, Modular Services Card, Routing, FPD, SNMP Agent, and Alarm Correlation. The mini iso file is used for upgrading to the new release. |
| Individually-Installable Optional Packages | ||
|
Feature Set |
Filename |
Description |
|
Cisco IOS XR 64 bit EIGRP package |
asr9k-eigrp-x64-1.0.0.0-r7101.x86_64.rpm |
Includes EIGRP protocol support software |
|
Cisco IOS XR BNG Package |
asr9k-bng-x64-1.1.0.0-r7101.x86_64.rpm |
Includes binaries to support BNG features. |
|
Cisco IOS XR 64 bit ISIS package |
asr9k-isis-x64-1.1.0.0-r710.x86_64.rpm |
Includes IS-IS Link state protocol support software |
|
Cisco IOS XR 64 bit OSPF package |
asr9k-ospf-x64-1.1.0.0-r710.x86_64.rpm |
Includes OSPF link state protocol support software |
|
Cisco IOS XR Manageability Package |
asr9k-mgbl-x64-3.0.0.0-r7101.x86_64.rpm |
CORBA2 agent, XML3 Parser, and HTTP server packages. This RPM also contains some SNMP MIB infrastructure. Certain MIBs won't work if this RPM is not installed. IPSLA and environment MIBs are part of the mgbl rpm. |
|
Cisco IOS XR 64 bit MPLS-TE and RSVP package |
asr9k-mpls-te-rsvp-x64-1.2.0.0-r7101.x86_64.rpm |
MPLS Traffic Engineering (MPLS-TE), Resource Reservation Protocol (RSVP). |
|
Cisco IOS XR 64 bit MPLS Package |
asr9k-mpls-x64-2.1.0.0-r7101.x86_64.rpm |
Label Distribution Protocol (LDP), MPLS Forwarding, MPLS Operations, Administration, and Maintenance (OAM), Link Manager Protocol (LMP), Optical User Network Interface (OUNI) and Layer-3 VPN. |
|
Cisco IOS XR 64 bit Multicast Package |
asr9k-mcast-x64-2.0.0.0-r7101.x86_64.rpm |
Multicast Routing Protocols (PIM, Multicast Source Discovery Protocol [MSDP], Internet Group Management Protocol [IGMP], Auto-RP), Tools (SAP, MTrace), and Infrastructure [(Multicast Routing Information Base [MRIB], Multicast-Unicast RIB [MURIB], Multicast forwarding [MFWD]), and Bidirectional Protocol Independent Multicast (BIDIR-PIM). |
|
Cisco IOS XR 64 bit Optics Package |
asr9k-optic-x64-1.0.0.0-r7101.x86_64.rpm |
Firmware for the optics feature for Cisco ASR 9000 Series Aggregation Services Router Chassis. It enables Transport / OTN feature under interfaces. |
|
Cisco IOS XR 64 bit Lawful Intercept (LI) Package |
asr9k-li-x64-1.1.0.0-r7101.x86_64.rpm |
Includes LI software images. |
|
Cisco IOS XR Security Package |
asr9k-k9sec-x64-3.1.0.0-r7101.x86_64.rpm |
Support for Encryption, Decryption,, Secure Shell (SSH), Secure Socket Layer (SSL), and Public-key infrastructure (PKI). |
|
Cisco IOS XR Satellite Package -ASR9000v |
asr9k-9000v-nV-x64-1.0.0.0-r7101.x86_64.rpm |
Includes RPM to support Cisco ASR9000v Series Router Software and to support Cisco ASR 9000v Series Router as a satellite for Cisco ASR 9000 Series Router |
|
Cisco IOS XR 64 bit Services Package |
asr9k-services-x64-1.0.0.0-r7101.x86_64.rpm |
Includes RPM to support Cisco IOS XR 64-bit inline MAP-T function |
Software Compatibility
Cisco IOS XR Software Release is compatible with the following Cisco ASR 9000 Series Aggregation Services Router systems.
-
Cisco ASR 9900 Series Chassis
-
Cisco ASR 9922 Chassis
-
Cisco ASR 9912 Chassis
-
Cisco ASR 9910 Chassis
-
Cisco ASR 9906 Chassis
-
Cisco ASR 9904 Chassis
-
Cisco ASR 9903 Chassis
-
Cisco ASR 9902 Chassis
-
Cisco ASR 9901 Chassis
-
-
Cisco ASR 9000 Series Chassis
-
Cisco ASR 9010 Chassis
-
Cisco ASR 9006 Chassis
-
For Cisco license support, please contact your Cisco Sales Representative or Customer Service at 800- 553-NETS (6387) or 408-526-4000. For questions on the program other than ordering, please send e-mail to: cwm-license@cisco.com.
Determining Installed Packages
To determine the version of Cisco IOS XR Software packages installed on your router, log in to the router and enter the show install active summary command:
Cisco IOS XR 64 bit
Router# show install active summary
Label : 7.10.1-7101
Active Packages: 18
asr9k-xr-7.10.1 version=7.10.1 [Boot image]
asr9k-9000v-nV-x64-1.0.0.0-r7101
asr9k-m2m-x64-1.0.0.0-r7101
asr9k-bng-x64-1.0.0.0-r7101
asr9k-bng-ipoe-x64-1.0.0.0-r7101
asr9k-bng-pppoe-x64-1.0.0.0-r7101
asr9k-eigrp-x64-1.0.0.0-r7101
asr9k-isis-x64-1.0.0.0-r7101
asr9k-mcast-x64-1.0.0.0-r7101
asr9k-mgbl-x64-1.0.0.0-r7101
asr9k-mpls-x64-1.0.0.0-r7101
asr9k-ospf-x64-1.0.0.0-r7101
asr9k-services-x64-1.0.0.0-r7101
asr9k-optic-x64-1.0.0.0-r7101
asr9k-bng-supp-x64-1.0.0.0-r7101
asr9k-li-x64-1.0.0.0-r7101
asr9k-k9sec-x64-1.0.0.0-r7101
asr9k-mpls-te-rsvp-x64-1.0.0.0-r7101Firmware Support on Cisco IOS XR 64-bit
To check the firmware code running on the Cisco ASR 9000 Series Router, run the show fpd package command in admin mode:
Note |
The show command output lists supported and EOL hardware PIDs. To know the PIDs that are supported in this release, see the Supported Hardware section in this Release Notes. |
Supported Hardware
The following table lists the supported hardware components on the Cisco ASR 9000 Series Router and the minimum required software versions. For more information, see the Firmware Support section.
All hardware features are supported on Cisco IOS XR Software, subject to the memory requirements specified in the section.
For information on the end-of-sale and end-of-life dates for the Cisco ASR 9000 Series Router hardware, refer to the End-of-Life and End-of-Sale Notices page.
|
Cisco ASR 9000 Series Aggregation Services Router - Route Switch Processor Cards |
||
|
Part Number |
Description |
Support Initially Provided in IOS XR 64 bit Release |
|
A9K-RSP5-X-SE |
ASR 9000 Series Route Switch Processor 5 for Service Edge, Premium |
Release 7.6.2 |
|
A9K-RSP5-X-TR |
ASR 9000 Series Route Switch Processor 5 for Packet Transport, Premium |
Release 7.6.2 |
|
A9K-RSP5-SE |
ASR 9000 Route Switch Processor 5 for Service Edge |
Release 6.5.15 |
|
A9K-RSP5-TR |
ASR 9000 Route Switch Processor 5 for Packet Transport |
Release 6.5.15 |
|
A9K-RSP880-LT-SE |
Cisco ASR 9000 Series Aggregation Services Router RSP880-Lite, Service Edge Optimized |
Release 6.4.1 |
|
A9K-RSP880-LT-TR |
Cisco ASR 9000 Series Aggregation Services Router RSP880-Lite, Packet Transport Optimized |
Release 6.4.1 |
|
A99-RSP-SE |
Cisco ASR 9000 Series Aggregation Services Router RSP4-S, Service Edge Optimized for ASR 9910 from Release 6.0.1. |
Release 6.2.1 |
|
A99-RSP-TR |
Cisco ASR 9000 Series Aggregation Services Router RSP4-S, Packet Transport Optimized for ASR 9910 from Release 6.0.1. |
Release 6.2.1 |
|
A99-RSP-SE |
Cisco ASR 9000 Series Aggregation Services Router RSP4-S, Service Edge Optimized for ASR 9906 from Release 6.3.1. |
Release 6.3.1 |
|
A99-RSP-TR |
Cisco ASR 9000 Series Aggregation Services Router RSP4-S, Packet Transport Optimized for ASR 9906 supported from Release 6.3.1 |
Release 6.3.1 |
|
A9K-RSP880-SE |
ASR9K Route Switch Processor with 880G/slot and 32 GB for Service Edge |
Release 6.1.2 |
|
A9K-RSP880-TR |
ASR9K Route Switch Processor with 880G/slot and 16 GB for Packet Transport |
Release 6.1.2 |
|
Cisco ASR 9000 Series Aggregation Services Router - Route Processor Cards |
||
|
Part Number |
Description |
Support Initially Provided in IOS XR 64 bit Release |
|
A99-RP3-X-SE |
ASR 9900 Route Processor 3 for Service Edge, Premium |
Release 7.6.2 |
|
A99-RP3-X-TR |
ASR 9900 Route Processor 3 for Packet Transport, Premium |
Release 7.6.2 |
|
A99-RP3-SE |
ASR 9900 Route Processor 3 for Service Edge |
Release 6.5.15 |
|
A99-RP3-TR |
ASR 9900 Route Processor 3 for Packet Transport |
Release 6.5.15 |
|
A99-RP2-SE |
ASR Route Processor 32 GB for Service Edge |
Release 6.1.2 |
|
A99-RP2-TR |
ASR Route Processor 16 GB for Packet Transport |
Release 6.1.2 |
| Cisco ASR 9901 Router | ||
|
Part Number |
Description |
Support Initially Provided in IOS XR 64 bit Release |
| ASR-9901 |
Cisco ASR 9000 Series Aggregation Services Router 2-RU Fixed Port |
Release 6.4.1 |
|
ASR-9901-FAN |
Cisco ASR 9000 Series Aggregation Services Router 2-RU Fixed Port Fan Tray |
Release 6.4.1 |
|
A9K-1600W-AC |
Cisco ASR 9000 Series Aggregation Services Router 2-RU 1600W AC Power Module |
Release 6.4.1 |
|
A9K-1600W-DC |
Cisco ASR 9000 Series Aggregation Services Router 2-RU 1600W DC Power Module |
Release 6.4.1 |
|
Cisco ASR 9902 Router |
||
|
Part Number |
Description |
Support Initially Provided in IOS XR 64 bit Release |
|
ASR-9902 |
Cisco ASR 9902 2RU Chassis with fixed ports |
Release 7.4.1 |
|
A99-RP-F |
Cisco ASR 9900 Fixed Chassis Route Processor |
Release 7.1.3 |
|
ASR-9902-4P-KIT |
Cisco ASR 9902 4-Post Mounting Kit for 19-Inch and 23-Inch Rack |
Release 7.4.1 |
|
ASR-9902-4P-KIT-L |
ASR 9902 4-Post Mounting Kit for 19 & 23 inch Rack – Long |
Release 7.4.1 |
|
ASR-9902-2P-KIT |
Cisco ASR 9902 2-Post Mounting Kit for 19-Inch and 23-Inch Rack |
Release 7.4.1 |
|
ASR-9902-CAB-MGMT |
Cisco ASR 9902 Cable Management |
Release 7.4.1 |
|
ASR-9902-FILTER |
Cisco ASR 9902 Air Filter |
Release 7.4.1 |
|
ASR-9902-FAN |
Cisco ASR 9902 Fan Tray |
Release 7.4.1 |
|
Cisco ASR 9903 Router |
||
|
Part Number |
Description |
Support Initially Provided in IOS XR 64 bit Release |
|
ASR-9903 |
Cisco ASR 9903 Compact High-Performance Router with fixed ports and PEC (Port Expansion Card) slot. |
Release 7.1.3 |
|
A99-RP-F |
Cisco ASR 9900 Fixed Chassis Route Processor |
Release 7.1.3 |
|
ASR-9903-FAN |
Cisco ASR 9903 Router Fan Tray |
Release 7.1.3 |
|
ASR-9903-4P-KIT |
ASR 9903 4-Post Mounting Kit for 19-inch Rack |
Release 7.1.3 |
|
ASR-9903-CAB-MGMT |
ASR 9903 Cable Management Brackets |
Release 7.1.3 |
|
ASR-9903-FILTER |
ASR 9903 Air Filter |
Release 7.1.3 |
|
Cisco ASR 9904 Router |
||
|
Part Number |
Description |
Support Initially Provided in IOS XR 64 bit Release |
|
ASR-9904 |
Cisco ASR 9000 Series Aggregation Services Router 4-Slot 2 Line Card Slot Chassis, 6 RU |
Release 6.1.2 |
|
ASR-9904-AC |
Cisco ASR 9000 Series Aggregation Services Router 4-Slot 2 Line Card Slot AC Chassis w/ PEM V2 |
Release 6.1.2 |
|
ASR-9904-DC |
Cisco ASR 9000 Series Aggregation Services Router 4-Slot 2 Line Card Slot DC Chassis w/ PEM V2 |
Release 6.1.2 |
|
ASR-9904-FAN |
Cisco ASR 9000 Series Aggregation Services Router 4-Slot Fan Tray |
Release 6.1.2 |
|
ASR-9904-FILTER |
Cisco ASR 9000 Series Aggregation Services Router 4-Slot Filter |
Release 6.1.2 |
|
ASR-9904-BAFFLE |
Cisco ASR 9000 Series Aggregation Services Router 4-Slot Baffle |
Release 6.1.2 |
|
Cisco ASR 9912 Router |
||
|
Part Number |
Description |
Support Initially Provided in IOS XR 64 bit Release |
|
ASR-9912 |
Cisco ASR 9000 Series Aggregation Services Router 12-Slot 10 Line Card Slot Chassis |
Release 6.1.2 |
|
ASR-9912-AC |
Cisco ASR 9000 Series Aggregation Services Router 12-Slot 10 Line Card Slot AC Chassis w/ PEM V2 |
Release 6.1.2 |
|
ASR-9912-DC |
Cisco ASR 9000 Series Aggregation Services Router 12-Slot 10 Line Card Slot DC Chassis w/ PEM V2 |
Release 6.1.2 |
|
A99-SFC3 |
Cisco ASR 9900 Switch Fabric Card 3 |
Release 6.5.15 |
|
A99-SFC2 |
Cisco ASR 9000 Fabric Card |
Release 6.1.2 |
|
ASR-9912-FAN |
Cisco ASR 9000 Series Aggregation Services Router 12-Slot Fan Tray |
Release 6.1.2 |
|
Cisco ASR 9922 Router |
||
|
Part Number |
Description |
Support Initially Provided in IOS XR 64 bit Release |
|
ASR-9922 |
Cisco ASR 9922 20 Line Card Slot Chassis, 44 RU |
Release 6.1.2 |
|
ASR-9922-AC |
Cisco ASR 9000 Series Aggregation Services Router 22-Slot 20 Line Card Slot AC Chassis w/ PEM V2 |
Release 6.1.2 |
|
ASR-9922-DC |
Cisco ASR 9000 Series Aggregation Services Router 22-Slot 20 Line Card Slot DC Chassis w/ PEM V2 |
Release 6.1.2 |
|
A99-SFC3 |
Cisco ASR 9900 Switch Fabric Card 3 |
Release 6.5.15 |
|
A99-SFC2 |
Cisco ASR 9000 Fabric Card |
Release 6.1.2 |
|
ASR-9922-FAN-V3 |
Cisco ASR 9000 Series Aggregation Services Router 22-Slot Fan Tray version 3 |
Release 6.5.15 |
|
ASR-9922-FLTR-CV2 |
Cisco ASR 9000 Series Aggregation Services Router 22-Slot Air Filter with Media, Center |
Release 6.1.2 |
|
ASR-9922-FLTR-LR |
Cisco ASR 9000 Series Aggregation Services Router 22-Slot Air Filter with Media, Left & Right |
Release 6.1.2 |
|
ASR-9922-RP-FILR |
Cisco ASR 9000 Series Aggregation Services Router 22-Slot Route Processor Filler |
Release 6.1.2 |
|
ASR-9922-FAN-V2 |
Cisco ASR 9000 Series Aggregation Services Router 22-Slot Version 2 Fan Tray |
Release 6.1.2 |
|
Cisco ASR 9006 Router |
||
|
Part Number |
Description |
Support Initially Provided in IOS XR 64 bit Release |
|
ASR-9006-SYS |
Cisco ASR 9000 Series Aggregation Services Router 6-Slot System |
Release 6.1.2 |
|
ASR-9006-AC-V2 |
Cisco ASR 9000 Series Aggregation Services Router 6-Slot AC Chassis Version 2 |
Release 6.1.2 |
|
ASR-9006-DC-V2 |
Cisco ASR 9000 Series Aggregation Services Router 6-Slot DC Chassis Version 2 |
Release 6.1.2 |
|
ASR-9006-FAN |
Cisco ASR 9000 Series Aggregation Services Router 6-Slot Fan Tray |
Release 6.1.2 |
|
ASR-9006-DOOR |
Cisco ASR 9000 Series Aggregation Services Router 6-Slot Door Kit |
Release 6.1.2 |
|
ASR-9006-FILTER |
Cisco ASR 9000 Series Aggregation Services Router 6-Slot Air Filter |
Release 6.1.2 |
|
Cisco ASR 9906 Router |
||
|
Part Number |
Description |
Support Initially Provided in IOS XR 64 bit Release |
|
ASR-9906 |
Cisco ASR 9000 Series Aggregation Services Router 6-Slot chassis |
Release 6.3.1 |
|
ASR-9906-FAN |
Cisco ASR 9000 Series Aggregation Services Router 6-Slot Fan Tray |
Release 6.3.1 |
|
ASR-9906-FILTER |
Cisco ASR 9000 Series Aggregation Services Router 6-Slot Fan Filter |
Release 6.3.1 |
|
A99-SFC3-T |
ASR 9906 Switch Fabric Card |
Release 6.5.15 |
|
A99-SFC-T |
ASR 9906 Switch Fabric Card 3 |
Release 6.3.1 |
|
Cisco ASR 9010 Router |
||
|
Part Number |
Description |
Support Initially Provided in IOS XR 64 bit Release |
|
ASR-9010-SYS |
Cisco ASR 9000 Series Aggregation Services Router 10-Slot System |
Release 6.1.2 |
|
ASR-9010-AC-V2 |
Cisco ASR 9000 Series Aggregation Services Router 10-Slot AC Chassis Version 2 |
Release 6.1.2 |
|
ASR-9010-DC-V2 |
Cisco ASR 9000 Series Aggregation Services Router 10-Slot DC Chassis Version 2 |
Release 6.1.2 |
|
ASR-9010-FAN |
Cisco ASR 9000 Series Aggregation Services Router 10-Slot Fan Tray |
Release 6.1.2 |
|
ASR-9010-DOOR |
Cisco ASR 9000 Series Aggregation Services Router 10-Slot Door Kit |
Release 6.1.2 |
|
ASR-9010-2P-KIT |
Cisco ASR 9000 Series Aggregation Services Router 2 Post Mounting Kit |
Release 6.1.2 |
|
ASR-9010-2P-KIT |
Cisco ASR 9000 Series Aggregration Services Router 4 Post Mounting Kit |
Release 6.1.2 |
|
ASR-9010-FILTER |
Cisco ASR 9000 Series Aggregation Services Router 10-Slot Air Filter |
Release 6.1.2 |
|
Cisco ASR 9910 Router |
||
|
Part Number |
Description |
Support Initially Provided in IOS XR 64 bit Release |
|
ASR-9910 |
Cisco ASR 9000 Series Aggregation Services Router 10-Slot (9910) System |
Release 6.2.1 |
|
ASR-9910-FAN |
Cisco ASR 9000 Series Aggregation Services Router 10-Slot(9910) Fan Tray |
Release 6.2.1 |
|
ASR-9910-ACC-KIT |
Cisco ASR 9000 Series Aggregation Services Router 10-Slot (9910) Accessory Kit |
Release 6.2.1 |
|
ASR-9910-4P-KIT |
Cisco ASR 9000 Series Aggregation Services Router 10-Slot (9910) 4 Post Rack Mounting Kit |
Release 6.2.1 |
|
ASR-9910-2P-KIT |
Cisco ASR 9000 Series Aggregation Services Router 10-Slot (9910) 2 Post Rack Mounting Kit |
Release 6.2.1 |
|
ASR-9910-AIRREF |
Cisco ASR 9000 Series Aggregation Services Router 10-Slot (9910) Air Reflector |
Release 6.2.1 |
|
ASR-9910-FILTER |
Cisco ASR 9000 Series Aggregation Services Router 10-Slot (9910) Air Filter |
Release 6.2.1 |
|
A99-SFC-S |
Cisco ASR 9000 Series Aggregation Services Router 10-Slot (9910) Switch Fabric Card |
Release 6.2.1 |
|
A99-SFC3-S |
ASR 9910 Switch Fabric Card 3 |
Release 6.5.15 |
|
Cisco ASR 9000 Series Aggregation Services Router - Power Modules |
||
|
Part Number |
Description |
Support Initially Provided in IOS XR 64 bit Release |
|
PWR-2KW-DC-V2 |
Cisco ASR 9000 Series Aggregation Services Router 2KW DC Power Module, version 2 |
Release 6.1.2 |
|
PWR-3KW-AC-V2 |
Cisco ASR 9000 Series Aggregation Services Router 3KW AC Power Module, version 2 |
Release 6.1.2 |
|
A9K-AC-PEM-V2 |
Cisco ASR 9000 Series Aggregation Services Router AC Power Entry Module Version 2 |
Release 6.1.2 |
|
A9K-DC-PEM-V2 |
Cisco ASR 9000 Series Aggregation Services Router DC Power Entry Module Version 2 |
Release 6.1.2 |
|
A9K-PEM-V2-FILR |
Cisco ASR 9000 Series Aggregation Services Router Power Entry Module Version 2 Filler |
Release 6.1.2 |
|
A9K-AC-PEM-V3 |
Cisco ASR 9000 Series Aggregation Services Router AC Power Enclosure Module Version 3 |
Release 6.1.2 |
|
A9K-DC-PEM-V3 |
Cisco ASR 9000 Series Aggregation Services Router DC Power Enclosure Module Version 3 |
Release 6.1.2 |
|
PWR-6KW-AC-V3 |
Cisco ASR 9000 Series Aggregation Services Router 6kW AC Power Module Version 3 |
Release 6.1.2 |
|
PWR-4.4KW-DC-V3 |
Cisco ASR 9000 Series Aggregation Services Router 4.4kW DC Power Module Version 3 |
Release 6.1.2 |
|
PWR-1.6KW-AC |
ASR 9900 Fixed Chassis AC Power Supply |
Release 7.1.25 |
|
PWR-1.6KW-DC |
ASR 9900 Fixed Chassis DC Power Supply |
Release 7.1.25 |
|
Cisco ASR 9000 Series Aggregation Services Router - Line Cards |
||
|
Part Number |
Description |
Support Initially Provided in IOS XR 64 bit Release |
|
A9K-4HG-FLEX-SE |
ASR 9000 400GE Combo Service Edge Line Card - 5th Generation |
Release 7.4.1 |
|
A9K-4HG-FLEX-TR |
ASR 9000 400GE Combo Packet Transport Line Card - 5th Generation |
Release 7.4.1 |
|
A99-4HG-FLEX-SE |
ASR 9900 400GE Combo Service Edge Line Card - 5th Generation |
Release 7.4.1 |
|
A99-4HG-FLEX-TR |
ASR 9900 400GE Combo Packet Transport Line Card - 5th Generation |
Release 7.4.1 |
|
A9903-8HG-PEC |
ASR 9903 800G Multi-rate Port Expansion Card |
Release 7.4.1 |
|
A99-10X400GE-X-SE |
ASR 9900 4T Service Edge Line Card - 5th Generation |
Release 7.3.1 |
|
A99-10X400GE-X-TR |
ASR 9900 4T Packet Transport Line Card - 5th Generation |
Release 7.3.1 |
|
A9903-20HG-PEC |
ASR 9903 2T Multi-rate Port Expansion Card |
Release 7.1.3 |
|
A99-32X100GE-X-SE |
ASR 9000 32-Port 100GE QSFP28/QSFP+ Service Edge optimized Line Card - 5th Generation |
Release 7.1.15 |
|
A99-32X100GE-X-TR |
ASR 9000 32-Port 100GE QSFP28/QSFP+ Packet Transport optimized Line Card - 5th Generation |
Release 7.1.15 |
|
A9K-20HG-FLEX-SE A9K-20HG-FLEX-TR |
ASR 9000 2T Combo Line Card - 5th Generation |
Release 7.1.15 |
|
A9K-8HG-FLEX-SE A9K-8HG-FLEX-TR |
ASR 9000 800G Combo Line Card - 5th Generation |
Release 7.1.15 |
|
A9K-16X100GE-TR |
ASR 9000 16-port 100GE QSFP TR line card |
Release 6.5.15 |
|
A99-32X100GE-TR |
ASR 9900 32-port 100GE QSFP TR line card |
Release 6.5.15 |
|
A99-48X10GE-1G-SE |
ASR 9000 48 port dual rate 10G/1G Service Edge line card |
Release 6.5.2 |
|
A99-48X10GE-1G-TR |
ASR 9000 48 port dual rate 10G/1G Transport Optimised line card |
Release 6.5.2 |
|
A99-16X100GE-X-SE |
ASR 9900 16-port 100GE QSFP SE |
Release 6.5.3 |
|
A9K-48X10GE-1G-CM |
ASR 9000 48-port dual-rate 10G/1G Consumption Model line card |
Release 6.4.1 |
|
A9K-24X10GE-1G-CM |
ASR 9000 24-port dual-rate 10G/1G Consumption Model line card |
Release 6.4.1 |
|
A9K-4X100GE |
ASR 9000 4-port 100-Gigabit Ethernet Line Card |
Release 6.4.1 |
|
A9K-48X10GE-1G-SE |
ASR9000 48-port dual-rate 10G/1G service edge–optimized line card |
Release 6.3.2 |
|
A9K-48X10GE-1G-TR |
ASR9000 48-port dual-rate 10G/1G packet transport–optimized line card |
Release 6.3.2 |
|
A9K-24X10GE-1G-SE |
ASR9000 24-port dual-rate 10G/1G service edge–optimized line card |
Release 6.3.2 |
|
A9K-24X10GE-1G-TR |
ASR9000 24-port dual-rate 10G/1G packet transport–optimized line card |
Release 6.3.2 |
|
A99-8X100GE-SE |
ASR 9900 8-port 100GE Service Edge optimized |
Release 6.1.2 |
|
A99-8X100GE-TR |
ASR 9900 8-port 100GE Packet Transport optimized |
Release 6.1.2 |
|
A99-8X100GE-CM |
ASR 9900 8-port 100GE Consumption Model |
Release 6.1.2 |
|
A99-12X100GE |
Cisco ASR 9000 Series Aggregation Services Router 12-Port 100-Gigabit Ethernet Line Card |
Release 6.1.2 |
|
A99-12X100GE-CM |
Cisco ASR 9000 Series Aggregation Services Router 12-port 100GE Ethernet Line card CM |
Release 6.1.2 |
|
A9K-8X100GE-CM |
Cisco ASR 9000 Series Aggregation Services Router 8-Port 100- Gigabit Ethernet, Consumption Model Optimized with CPAK |
Release 6.1.2 |
|
A9K-8X100GE-SE |
Cisco ASR 9000 Series Aggregation Services Router 8-Port 100- Gigabit Ethernet, Service Edge Optimized |
Release 6.1.2 |
|
A9K-8X100GE-TR |
Cisco ASR 9000 Series Aggregation Services Router 8-Port 100-Gigabit Ethernet, Packet Transport Optimized |
Release 6.1.2 |
|
A9K-4X100GE-SE |
Cisco ASR 9000 Series Aggregation Services Router 4--Port 100-Gigabit Ethernet, Service Edge Optimized |
Release 6.1.2 |
|
A9K-4X100GE-TR |
Cisco ASR 9000 Series Aggregation Services Router 4-Port 100- Gigabit Ethernet, Packet Transport Optimized |
Release 6.1.2 |
|
Cisco ASR 9000 Series Aggregation Services Router - Modular Line Cards |
||
|
Part Number |
Cisco ASR 9000 Series Aggregation Services Router 200 Gigabit Modular Line Card, Packet Transport Optimized Cisco ASR 9000 Series Aggregation Services Router 200 Gigabit Modular Line Card, Service Edge Optimized |
Support Initially Provided in IOS XR 64 bit Release |
|
A9K-MOD200-TR A9K-MOD200-SE |
Cisco ASR 9000 Modular 400G Consumption Model Line Card |
Release 6.3.1 |
|
A9K-MOD400-CM |
Cisco ASR 9000 Series Aggregation Services Router 400 Gigabyte Modular Line Card, Service Edge Optimized |
Release 6.2.1 |
| A9K-MOD400-SE |
Cisco ASR 9000 Series Aggregation Services Router 400 Gigabyte Modular Line Card, Packet Transport Optimized |
Release 6.2.1 |
|
A9K-MOD400-TR |
Cisco ASR 9000 Series Aggregation Services Router 200 Gigabit Modular Line Card, Packet Transport Optimized Cisco ASR 9000 Series Aggregation Services Router 200 Gigabit Modular Line Card, Service Edge Optimized |
Release 6.2.1 |
|
Cisco ASR 9000 Series Aggregation Services Router - Modular Port Adapters (MPAs) |
||
|
Part Number |
Description |
Support Initially Provided in IOS XR 64 bit Release |
|
A9K-MPA-1X200GE |
Cisco ASR 9000 1-port 200-Gigabit Ethernet MPA, requires CFP2-DCO optics |
Release 6.6.2 |
|
A9K-MPA-32X1GE |
Cisco ASR 9000 32-port 1-Gigabit Ethernet MPA with MACSec |
Release 6.6.2 |
|
A9K-MPA20X10GE-CM |
Cisco ASR 9000 20x10GE Consumption Model MPA |
Release 6.5.1 |
|
A9K-MPA2X100GE-CM |
Cisco ASR 9000 2x100GE Consumption Model MPA |
Release 6.5.1 |
|
A9K-MPA-1X100GE |
Cisco ASR 9000 Series Aggregation Services Router 1-port 100-Gigabit Modular Port Adapter |
Release 6.3.1 |
|
A9K-MPA-2X100GE |
Cisco ASR 9000 Series Aggregation Services Router 2-port 100-Gigabit Modular Port Adapter |
Release 6.2.2 |
|
A9K-MPA-20x10GE |
20-Port 10-Gigabit Ethernet Modular Port Adapter with SFP+ |
Release 6.2.1 |
|
A9K-MPA-8X10GE |
Cisco ASR 9000 Series Aggregation Services Router 8-port 10GE Modular Port Adapter |
Release 6.3.2 |
|
A9K-MPA-4X10GE |
Cisco ASR 9000 Series Aggregation Services Router 4-port 10GE Modular Port Adapter |
Release 6.2.1 |
|
A9K-MPA-20X1GE |
Cisco ASR 9000 Series Aggregation Services Router 20-port 1GE Modular Port Adapter |
Release 6.2.1 |
|
A9K-MPA-2X40GE |
Cisco ASR 9000 Series Aggregation Services Router 2-port 40GE Modular Port Adapter |
Release 6.3.1 |
|
Cisco Digital Pluggable Optical Modules |
||
|
CFP2-WDM-DET-1HL= |
200G, 100G, WDM Digital CFP2 pluggable Licensed for 100G only – TOF |
Release 6.6.2 |
|
CFP2-WDM-D-1HL= |
200G, 100G, WDM Digital CFP2 pluggable Licensed for 100G only – NON TOF |
Release 6.6.2 |
|
Cisco ASR 9000v Satellite Shelf |
||
|
Part Number |
Description |
Support Initially Provided in IOS XR 64 bit Release |
|
A9KV-V2-DC-A= |
Cisco ASR 9000v Satellite Shelf Version 2 DC power ANSI chassis |
Release 6.2.1 |
|
A9KV-V2-DC-E= |
Cisco ASR 9000v Satellite Shelf Version 2 DC power chassis |
Release 6.2.1 |
|
A9KV-V2-AC= |
Cisco ASR 9000v Satellite Shelf AC power chassis |
Release 6.2.1 |
|
A9KV-V2-FAN= |
Cisco ASR 9000v Satellite Shelf Version 2 Fan Tray |
Release 6.2.1 |
|
Cisco NCS 5000 Satellite Shelf |
||
|
Part Number |
Description |
Support Initially Provided in IOS XR 64 bit Release |
|
NCS-5001 |
Cisco NCS 5001 Series Router |
Release 6.2.1 |
|
NCS-5002 |
Cisco NCS 5002 Series Router |
Release 6.2.1 |
|
NCS-5001-ACSR |
Cisco NCS 5001 Router Accessory Kit |
Release 6.2.1 |
|
NCS-5002-ACSR |
Cisco NCS 5002 Router Accessory Kit |
Release 6.2.1 |
|
NCS-5001-FN-BK |
Cisco NCS 5001 Router Fan Back to Front AirFlow |
Release 6.2.1 |
|
NCS-5002-FN-BK |
Cisco NCS 5002 Router Fan Back to Front AirFlow |
Release 6.2.1 |
|
NCS-5001-FLT-BK |
Cisco NCS 5001 Air Filter Back to Front Airflow |
Release 6.2.1 |
|
NCS-5002-FLT-BK |
Cisco NCS 5002 Air Filter Back to Front Airflow |
Release 6.2.1 |
|
NCS-5001-FN-FR |
Cisco NCS 5001 Fan Front to Back Airflow |
Release 6.2.1 |
|
NCS-5002-FN-FR |
Cisco NCS 5002 Fan Front to Back Airflow |
Release 6.2.1 |
|
NCS-5001-FLT-FR |
Cisco NCS 5001 Air Filter Front to Back Airflow |
Release 6.2.1 |
|
NCS-5002-FLT-FR |
Cisco NCS 5002 Air Filter Front to Back Airflow |
Release 6.2.1 |
Important Notes
-
Repetitive Smart Licensing evaluation expired warning messages are displayed on the console every hour, but no functionality impact is observed on the device. To stop these repetitive messages, you should register the device again with a new registration token.
-
From IOS XR Release 7.0, 1st and 2nd generation of Ethernet ASR 9000 line cards are not supported.
-
Country-specific laws, regulations, and licenses—In certain countries, use of these products may be prohibited and subject to laws, regulations, or licenses, including requirements applicable to the use of the products under telecommunications and other laws and regulations; customers must comply with all such applicable laws in the countries in which they intend to use the products.
-
Exceeding Cisco testing—If you intend to test beyond the combined maximum configuration tested and published by Cisco, contact your Cisco Account Team or Technical Support representative to discuss how to engineer a large-scale configuration for your purpose.
-
ISSU on ASR 9000 third-generation line cards will be supported until the Cisco IOS XR Releases 7.10.x only.
-
Installing a Line Card—For a fully populated Line Card with cable optics, maintenance time required for card replacement is higher. For more information about Line Card installation and removal, refer to the Cisco ASR 9000 Aggregation Services Router Ethernet Line Card Installation Guide.
-
For ZTP, In Cisco IOS XR Release 7.3.1 and earlier, the system accepts the device sending user-class = "exr-config"; however starting Cisco IOS XR Release 7.3.2 and later, you must use only user-class = "xr-config".
In Cisco IOS XR Release 7.3.2 and later, use:
host cisco-rp0 { hardware ethernet e4:c7:22:be:10:ba; fixed-address 172.30.12.54; if exists user-class and option user-class = "iPXE" { filename = "http://172.30.0.22/boot.ipxe"; } elsif exists user-class and option user-class = "xr-config" { filename = "http://172.30.0.22/scripts/cisco-rp0_ztp.sh"; } }
Supported Transceiver Modules
To determine the transceivers that Cisco hardware device supports, refer to the Transceiver Module Group (TMG) Compatibility Matrix tool.
Supported Modular Port Adapters
For the compatibility details of Modular Port Adapters (MPAs) on the line cards, see the datasheet of that specific line card.
Production Software Maintenance Updates (SMUs)
A production SMU is a SMU that is formally requested, developed, tested, and released. Production SMUs are intended for use in a live network environment and are formally supported by the Cisco TAC and the relevant development teams. Software bugs identified through software recommendations or Bug Search Tools are not a basis for production SMU requests.
For information on production SMU types, refer the Production SMU Types section of the IOS XR Software Maintenance Updates (SMUs) guide.
Upgrading Cisco IOS XR Software
Cisco IOS XR Software is installed and activated from modular packages, allowing specific features or software patches to be installed, upgraded, or downgraded without affecting unrelated processes. Software packages can be upgraded or downgraded on all supported card types, or on a single card (node).
Software packages are installed from Route Processor Module (RPM) files that contain one or more software components.
The upgrade document is available along with the software images.
Note |
If you have mLACP/ICCP Redundancy Model setup, ensure that you upgrade the active and standby nodes to the same IOS XR version while upgrading to a newer version of the ASR 9000 router. |
Cisco IOS XR Error messages
To view, search, compare, and download Cisco IOS XR Error Messages, refer to the Cisco IOS XR Error messages tool.
Cisco IOS XR MIBs
To determine the MIBs supported by platform and release, refer to the Cisco IOS XR MIBs tool.
Related Documentation
The most current Cisco ASR 9000 router documentation is located at the following URL:
https://www.cisco.com/c/en/us/td/docs/iosxr/asr-9000-series-routers.html
Feedback