Cisco 7600 Series Router Installation Guide
Preface
Downloads: This chapterpdf (PDF - 543.0KB) The complete bookPDF (PDF - 20.75MB) | Feedback

Preface

Table Of Contents

Preface

Document Revision History

Audience

Organization

Conventions

Related Documentation

Obtaining Documentation and Submitting a Service Request


Preface


This preface describes who should read the Cisco 7600 Series Internet Router Module Installation Guide, how it is organized, and its document conventions.


Note This publication describes the following Cisco 7600 series routers:

Cisco 7603 router—CISCO7603

Cisco 7603-S router—CISCO7603-S

Cisco 7604 router—CISCO7604

Cisco 7606 router—CISCO7606

Cisco 7606-S router—CISCO7606-S

Cisco 7609 router—CISCO7609

Cisco 7609-S router—CISCO7609-S

Cisco 7613 router—CISCO7613

Cisco 7613-S router—CISCO7613-S

Information on the Cisco 7609 Router (product number OSR-7609) is in the Cisco 7609 Router Installation Guide, located at this URL:

http://www.cisco.com/univercd/cc/td/doc/product/core/cis7600/hardware/osrouter/index.htm

Document Revision History

Revision
Date
Change Summary

OL-4503-27

December 2012

Added support for Cisco 7613-S router in Chapter 1 "Product Overview."

OL-4503-26

January 2011

Added chassis air flow requirements in Chapter 5 "Removal and Replacement Procedures."

OL-4503-26

October 2010

Added new troubleshooting information in Chapter 4 "Troubleshooting."

OL-4503-25

July 2010

Added clearance guidelines when planning to install or remove power supplies, at the rear of the Cisco 7606, Cisco 7606-S and Cisco 7604 routers, in "Clearance Guidelines" section.

OL-4503-25

April 2010

Update configuration information about dynamic config Manager a 7606S Chassis with mixed Mode AC and DC.

OL-4503-25

March 2010

Add information about cable management system in c7609 and c7609-S routers.

OL-4503-25

February 2010

Added the section `Identifying Chassis Version in the Supported Line Card' in Appendix E.

OL-4503-25

January 2010

Added the Supported line cards in 7600 Chasis table 2-1 in Chapter 2.

OL-4503-25

November 2009

Added 7606-C Dc power supply details in Chapter 5, Appendix A, and Appendix E.

OL-4503-24

October 2008

Updated heat and power dissipation numbers in Chapter 2.

OL-4503-23

June 2007

Added Cisco 7603-S router

Added Cisco 7606-S router

Added 1500 W DC input (PWR-1500-DC) power supply

OL-4503-22

February 2007

Added Route Switch Processor 720 (RSP720)

Added Cisco 7609-S router

Added 6000 W DC input (PWR-6000-DC) power supply

OL-4503-21

December 2005

Updated PWR-2700-DC/4 Power Supply information in Removing and Replacing the Power Supply in Chapter 5.

Added acoustical noise information to Appendix A.

OL-4503-20

December 2005

Added Supervisor Engine 32

Added 19" rack information to Installing the Chassis Brackets in Chapter 3.

OL-4503-19

September 2005

Added new cable information to 2700 W Power Supply (PWR-2700-AC) in Chapter 2.

OL-4503-18

April 2005

Added PWR-2700-AC/4 for Cisco 7604.

OL-4503-17

April 2005

Added 6000 W AC input (WS-CAC-6000W ) information to Chapters 1, 2, and 5, and to Appendix A.

Added Cisco 7604 router information to Chapters 1, 2, 3, and 5, and to Appendix A.

Added 2700 W DC input (PWR-2700-DC) information to Chapters 1, 2, and 5, and to Appendix A.

OL-4503-16

January 2005

Added CAB-AC16A-CH for the 1400 W Power Supply (PWR-1400-AC) and the 3000 W Power Supply (WS-CAC-3000W) in Table 2-5.

Added 2700 W AC input (PWR-2700-AC) information to Chapters 1, 2, and 5, and to Appendix A.

OL-4503-15

November 2004

Added CAB-ACS-10= for the 1400 W Power Supply (PWR-1400-AC=) in Table 2-5.

OL-4503-14

November 2004

Updated 4000 W DC-input power supply terminal block lug information in Chapter 5.

OL-4503-13

September 2004

Changed system grounding note in Chapter 3.

OL-4503-12

August 2004

Added DWDM information to Appendix B.

OL-4503-11

July 2004

Initated Document Revision History in Preface.

Added1400 W AC and 3000 W AC power supplies to Chapters 1, 2, and 5, and Appendix A.

Added information on cleaning opical interfaces to Chapter 3and to Appendix B.

Added notes to 4000 W DC power supply section concerning the amount of space necessary to install power cables and the amount of torque necessary for tightening terminal nuts to Chapter 5.

Added Appendix D for configuration register information.

Added power supply and PEM table to Chapter 1.


Audience

Only trained and qualified service personnel (as defined in IEC 60950 and AS/NZS3260) should install, replace, or service the equipment described in this publication.

Organization

This publication is organized as follows:

Chapter
Title
Description

Chapter 1

Product Overview

Describes and lists the hardware features and functionality of the Cisco 7600 series routers.

Chapter 2

Preparing for Installation

Describes how to prepare your site for the installation of the Cisco 7600 series routers.

Chapter 3

Installing the Cisco 7600 Series Router

Describes how to install your Cisco 7600 series router.

Chapter 4

Troubleshooting

Provides troubleshooting guidelines for the initial hardware installation and suggests steps to help isolate and resolve problems.

Chapter 5

Removal and Replacement Procedures

Provides procedures for removing and installing chassis components.

Appendix A

Technical Specifications

Lists the Cisco 7600 series router system specifications.

Appendix B

Connector and Cable Specifications

Describes the connectors and cables used with the Cisco 7600 series routers.

Appendix C

Repacking the Cisco 7600 Series Router

Provides procedures to repack your Cisco 7600 series router if you have to return it to the factory.


Conventions

Notes use the following conventions:


Note Means reader take note. Notes contain helpful suggestions or references to material not covered in the publication.


Cautions use the following conventions:


Caution Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data.

Warnings use the following conventions:


Warning

IMPORTANT SAFETY INSTRUCTIONS

This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device.

SAVE THESE INSTRUCTIONS

Waarschuwing

BELANGRIJKE VEILIGHEIDSINSTRUCTIES

Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel kan veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van de bij elektrische schakelingen betrokken risico's en dient u op de hoogte te zijn van de standaard praktijken om ongelukken te voorkomen. Gebruik het nummer van de verklaring onderaan de waarschuwing als u een vertaling van de waarschuwing die bij het apparaat wordt geleverd, wilt raadplegen.

BEWAAR DEZE INSTRUCTIES

Varoitus

TÄRKEITÄ TURVALLISUUSOHJEITA

Tämä varoitusmerkki merkitsee vaaraa. Tilanne voi aiheuttaa ruumiillisia vammoja. Ennen kuin käsittelet laitteistoa, huomioi sähköpiirien käsittelemiseen liittyvät riskit ja tutustu onnettomuuksien yleisiin ehkäisytapoihin. Turvallisuusvaroitusten käännökset löytyvät laitteen mukana toimitettujen käännettyjen turvallisuusvaroitusten joukosta varoitusten lopussa näkyvien lausuntonumeroiden avulla.

SÄILYTÄ NÄMÄ OHJEET

Attention

IMPORTANTES INFORMATIONS DE SÉCURITÉ

Ce symbole d'avertissement indique un danger. Vous vous trouvez dans une situation pouvant entraîner des blessures ou des dommages corporels. Avant de travailler sur un équipement, soyez conscient des dangers liés aux circuits électriques et familiarisez-vous avec les procédures couramment utilisées pour éviter les accidents. Pour prendre connaissance des traductions des avertissements figurant dans les consignes de sécurité traduites qui accompagnent cet appareil, référez-vous au numéro de l'instruction situé à la fin de chaque avertissement.

CONSERVEZ CES INFORMATIONS

Warnung

WICHTIGE SICHERHEITSHINWEISE

Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu Verletzungen führen kann. Machen Sie sich vor der Arbeit mit Geräten mit den Gefahren elektrischer Schaltungen und den üblichen Verfahren zur Vorbeugung vor Unfällen vertraut. Suchen Sie mit der am Ende jeder Warnung angegebenen Anweisungsnummer nach der jeweiligen Übersetzung in den übersetzten Sicherheitshinweisen, die zusammen mit diesem Gerät ausgeliefert wurden.

BEWAHREN SIE DIESE HINWEISE GUT AUF.

Avvertenza

IMPORTANTI ISTRUZIONI SULLA SICUREZZA

Questo simbolo di avvertenza indica un pericolo. La situazione potrebbe causare infortuni alle persone. Prima di intervenire su qualsiasi apparecchiatura, occorre essere al corrente dei pericoli relativi ai circuiti elettrici e conoscere le procedure standard per la prevenzione di incidenti. Utilizzare il numero di istruzione presente alla fine di ciascuna avvertenza per individuare le traduzioni delle avvertenze riportate in questo documento.

CONSERVARE QUESTE ISTRUZIONI

Advarsel

VIKTIGE SIKKERHETSINSTRUKSJONER

Dette advarselssymbolet betyr fare. Du er i en situasjon som kan føre til skade på person. Før du begynner å arbeide med noe av utstyret, må du være oppmerksom på farene forbundet med elektriske kretser, og kjenne til standardprosedyrer for å forhindre ulykker. Bruk nummeret i slutten av hver advarsel for å finne oversettelsen i de oversatte sikkerhetsadvarslene som fulgte med denne enheten.

TA VARE PÅ DISSE INSTRUKSJONENE

Aviso

INSTRUÇÕES IMPORTANTES DE SEGURANÇA

Este símbolo de aviso significa perigo. Você está em uma situação que poderá ser causadora de lesões corporais. Antes de iniciar a utilização de qualquer equipamento, tenha conhecimento dos perigos envolvidos no manuseio de circuitos elétricos e familiarize-se com as práticas habituais de prevenção de acidentes. Utilize o número da instrução fornecido ao final de cada aviso para localizar sua tradução nos avisos de segurança traduzidos que acompanham este dispositivo.

GUARDE ESTAS INSTRUÇÕES

¡Advertencia!

INSTRUCCIONES IMPORTANTES DE SEGURIDAD

Este símbolo de aviso indica peligro. Existe riesgo para su integridad física. Antes de manipular cualquier equipo, considere los riesgos de la corriente eléctrica y familiarícese con los procedimientos estándar de prevención de accidentes. Al final de cada advertencia encontrará el número que le ayudará a encontrar el texto traducido en el apartado de traducciones que acompaña a este dispositivo.

GUARDE ESTAS INSTRUCCIONES

Varning!

VIKTIGA SÄKERHETSANVISNINGAR

Denna varningssignal signalerar fara. Du befinner dig i en situation som kan leda till personskada. Innan du utför arbete på någon utrustning måste du vara medveten om farorna med elkretsar och känna till vanliga förfaranden för att förebygga olyckor. Använd det nummer som finns i slutet av varje varning för att hitta dess översättning i de översatta säkerhetsvarningar som medföljer denna anordning.

SPARA DESSA ANVISNINGAR

 



Related Documentation

For additional information on the Cisco 7600 series router, refer to these publications:

Regulatory Compliance and Safety Information for the Cisco 7600 Series routers

Cisco 7609 router Installation Guide

Cisco 7600 Series Internet Router Module Installation Guide

Cisco 7600 Series Internet Router Quick Software Configuration Guide

Cisco 7600 Series Internet Router Software Configuration Guide

Cisco 7600 Series Internet Router IOS Command Reference

Cisco 7600 Series Internet Router IOS System Message Guide

Cisco 7600 Series Internet Router IOS Software Configuration Guide

Cisco 7600 Series Internet Router IOS Command Reference

Cisco 7600 Series Internet Router IOS System Message Guide

For information about MIBs, refer to http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS Version 2.0.