Guest

Cisco ONS 15300 Series

Installing the Traffic Slot Filler Card in the Cisco ONS 15310-CL and Cisco ONS 15310-MA

  • Viewing Options

  • PDF (374.7 KB)
  • Feedback
Installing the Traffic Slot Filler Card in the Cisco ONS 15310-CL and Cisco ONS 15310-MA

Table Of Contents

Installing the Traffic Slot Filler Card in the
Cisco ONS 15310-CL and Cisco ONS 15310-MA

Filler Card Description

Filler Card Specifications

Install the Filler Cards

Related Documentation

Obtaining Documentation and Submitting a Service Request


Installing the Traffic Slot Filler Card in the
Cisco ONS 15310-CL and Cisco ONS 15310-MA


Product Names: 15310-EXP-FILLER

This document provides a card description, specifications, and an installation procedure for the traffic slot filler card. As appropriate, use this document in conjunction with the Cisco ONS 15310-CL and Cisco ONS 15310-MA Procedure Guide, the Cisco ONS 15310-CL and Cisco ONS 15310-MA Reference Manual, and the Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide when working with filler cards.

This document contains the following sections:

Filler Card Description

Filler Card Specifications

Install the Filler Cards

Related Documentation

Obtaining Documentation and Submitting a Service Request

Filler Card Description


Warning Blank faceplates and cover panels serve three important functions: they prevent exposure to hazardous voltages and currents inside the chassis; they contain electromagnetic interference (EMI) that might disrupt other equipment; and they direct the flow of cooling air through the chassis. Do not operate the system unless all cards, faceplates, front covers, and rear covers are in place. Statement 1029



Caution Do not operate the ONS 15310-CL or ONS 15310-MA shelf assembly unless a card is plugged into each card slot.

The filler card is a printed circuit board (PCB) with a blank faceplate and two connectors that, when the card is installed, plug into receptacles at the back of the slot. CTC, the ONS 15310-CL graphical user interface (GUI), detects when a filler card is plugged in and displays it in node view.

Figure 1 shows the filler card faceplate. This card is used in the ONS 15310-CL expansion slot and ONS 15310-MA traffic card slots (Slots 1, 2, 5, and 6).

Figure 1 Filler Card

Filler Card Specifications

Environmental

Operating temperature

I-Temp: -40 to +65 degrees Celsius (-40 to 149 degrees Fahrenheit)

Operating humidity: 5 to 95%, noncondensing

Dimensions

Height: 176 mm (6.93 in.)

Width: 34.29 mm (1.35 in.)

Depth: 238.25 mm (9.38 in.)

Card weight (not including clam shell): 0.45 kg (0.9 lb)

Install the Filler Cards


Step 1 Open the card ejector at the top of the card.

Step 2 Slide the card along the guide rails into the expansion slot on the 15310-CL, or traffic slot on the 15310-MA (Slots 1, 2, 5, or 6).


Note Do not attempt to install the 15310-EXP-FILLER card in a CTX2500 card slot (Slots 3 and 4) on the 15310-MA shelf assembly. Only a 15310-CTX-FILLER card should be installed in the CTX2500 slot.


Step 3 Close the ejector by firmly pushing it downward.


Note The filler cards are hot-pluggable, so they can be inserted or removed without turning off the power to the ONS 15310-CL or ONS 15310-MA.


Step 4 When you log into CTC, verify that the card appears properly in CTC node view.

Stop. You have completed this procedure.


Related Documentation

Cisco ONS 15310-CL and Cisco ONS 15310-MA Procedure Guide

Cisco ONS 15310-CL and Cisco ONS 15310-MA Reference Manual

Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Subscribe to the What's New in Cisco Product Documentation as an RSS feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service. Cisco currently supports RSS Version 2.0.


This document is to be used in conjunction with the documents listed in the "Related Documentation" section.