Standard Warning Statements
Warning |
IMPORTANT SAFETY INSTRUCTIONS Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Read the installation instructions before using, installing, or connecting the system to the power source. Use the statement number provided at the end of each warning statement to locate its translation in the translated safety warnings for this device. Statement 1071 SAVE THESE INSTRUCTIONS |
Warning |
An instructed person is someone who has been instructed and trained by a skilled person and takes the necessary precautions when working with equipment. A skilled person or qualified personnel is someone who has training or experience in the equipment technology and understands potential hazards when working with equipment. Statement 1089 |
Warning |
Read the installation instructions before using, installing, or connecting the system to the power source. Statement 1004 |
Warning |
Ultimate disposal of this product must be handled according to all national laws and regulations. Statement 9001 |
Warning |
There are no serviceable parts inside. To avoid risk of electric shock, do not open. Statement 1073 |
Warning |
To reduce risk of electric shock or fire, installation of the equipment must comply with local and national electrical codes. Statement 1074 |
Warning |
You are strongly advised to read the safety instruction before using the product. https://www.cisco.com/web/JP/techdoc/pldoc/pldoc.html When installing the product, use the provided or designated connection cables/power cables/AC adapters. Statement 407 |
Warning |
Only a skilled person should be allowed to install, replace, or service this equipment. See statement 1089 for the definition of a skilled person. Statement 1090 |
Warning |
Only an instructed person or skilled person should be allowed to install, replace, or service this equipment. See statement 1089 for the definition of an instructed or skilled person. Statement 1091 |
Warning |
Blank faceplates and cover panels serve three important functions: they reduce the risk of electric shock and fire, they contain electromagnetic interference (EMI) that might disrupt other equipment, and they direct the flow of cooling air through the chassis. Do not operate the system unless all cards, faceplates, front covers, and rear covers are in place. Statement 1029 |
Warning |
To reduce risk of fire, explosion, or leakage of flammable liquid or gas:
Statement 1015 |