Cisco Prime Collaboration Assurance Guide - Standard, 10.0
Monitoring Alarms and Events
Downloads: This chapterpdf (PDF - 1.22 MB) The complete bookPDF (PDF - 3.21 MB) | Feedback

Monitoring Alarms and Events

Choose Operate > Alarms & Events to access the Alarms & Events page appears. You can filter alarms and events based on groups, using the Device Group pane on the left of the page.

The page has the following tabs:

Alarm Summary

Alarm Summary provides a summary of the alarms for each device. The following details are displayed:

Table 1 Alarm Summary Tab Contents




Alarm severity icon. Indicates the severity of the alarm.

Last 15 Minutes

Indicates that this device is one of the most recent in the table (within the last 15 minutes). Devices are sorted based on the time of the most recent event status changes.

Device Name

Device name or IP address.

Device IP

Device IP. Click on the quick view icon to launch the Device 360° View.


Device type.

Severity columns

  • Critical—Total number of critical alarms.
  • Major—Total number of major alarms
  • Minor—Total number of minor alarms
  • Warning—Total number of warning alarms.

Last Updated Time

Time and date of alarm update (indicates activity, such as an alarm recurrence, alarm acknowledgment, the addition of a note, and so forth). Alarms are grouped by severity, and within severities, alarms with the latest change are listed first.

The alarms and events that correspond to the selections appear in the Alarms and Events for device subpane. You can export the alarms as a CSV or PDF file. To export the alarms, select the desired alarms, and click the export icon on the top right of the Alarm Summary pane.


The Alarms tab displays the following information for each alarm in the Alarm Browser:

Table 2 Alarm Browser




Indicates the severity of the alarm which can be, critical, major, minor, warning, or cleared.

To view the events are associated with the alarm, hover the mouse over an alarm severity and click the quick view icon that appears. The Events of Alarm window appears, displaying the following details about the events for the alarm you selected:

  • Description—Alarm description.
  • Source—Device that triggered the alarm.
  • Time—Date and time when the alarm occurred.

This summary windows lists only the five latest events. To see the complete list, see Event History.

In the Events of Alarm window, you can click on:

  • The See Event History link to display the events associated with the selected alarm.
  • The Monitor Endpoint or Monitor Session link to launch the Endpoints Monitoring or Sessions Monitoring page. This link appears only for session and endpoint alarms.

Clipboard icon/Is Annotated

Indicates the alarm has user notations.


Indicates the status of the alarm.

Alarm Name

Name of the generated alarm.

Device Name

Displays the name of the device that triggered the alarm.

Device IP

Displays the IP address of the device. You can launch the endpoint or the infrastructure device log in page using the link.

Component Name

Device name, or the name of component such as a device pool, an interface.

Last Updated

Displays the date and time when the alarm occurred.


Displays the name of the person to whom this alarm is assigned. (If a name was entered.)


Displays a short description about the alarm.


Displays the category of alarm. For example: session, endpoint, service infrastructure.

From the alarm browser, you can:

  • View events associated with an alarm—Hover over your mouse on the icon next to alarm status to get a pop up window that displays all the events for the alarms.
  • Clear or acknowledge an alarm.
  • Assign the Alarm—Check the desired check box, click Assign to me from the assign drop-down list.
  • Add Annotation—Check the desired check box, click the Annotate drop-down list to add notes.
  • Delete Alarm—Check the desired check box, click Delete.
  • Set up Email Notification—Check the desired check box, click Email Notification. Enter the recipient addresses, comments, and subject, then click Submit.

See Cisco Prime Collaboration Supported Alarms and Events, 10.0 for a list of supported alarms and events.


The Events tab provide opens the event browser. To get the latest information, click the Refresh icon.

Table 3 Event Browser




Event unique identification number.


Event severities include: Critical, Major, Minor, Warning, and Informational. Click the title to sort the events list by severity (ascending or descending order). If any event is cleared, its severity changes to informational.


The current status of the event.

Event Name

The name of the event.

Device Name

The name of the device.

Device IP

Displays the IP address of the device. You can launch the endpoint or the infrastructure device log in page using the link

Component Name

Device name, or the name of component such as a device pool, an interface.

Last Updated

Displays the date and time when the event occurred


Displays the alarm assigned category, such as sessions, endpoints, and so on.


Description of the event.

The Event Browser displays the total number events, a Refresh icon, and the Settings icon to customize the Event browser columns.

At any point, to see the Alarm Browser or Alarm Summary, click the links available at the bottom right.

Viewing Call Events

Prime Collaboration displays the Cisco TelePresence Management Suite (TMS) informational events. It displays call connected or disconnected information for Cisco TelePresence System Profile MXP Series devices, Cisco TelePresence Integrator C Series codecs, and Cisco TelePresence Video Communication Server (VCS).

Call events can be displayed for only one supported device at a time.

To view call events:

    Step 1   Choose Operate > Device Work Center.
    Step 2   Select a device, and Click Call Events.

    Call events are displayed only for Cisco VCS, MXP, MCU devices, and codecs.

    Step 3   The Call Events window displays the following details:

    For MXP and Codecs:

    • Start Time—The call start time
    • Remote Site—The site to which the call was made.
    • Call State
    • Duration
    • Call Direction—Whether an incoming or outgoing call.
    • Call Protocol—H323/SIP
    • Encryption Mode
    • Cause
    • Bandwidth
    • Call ID For VCS:
    • Time
    • Source Address
    • Source Alias
    • Destination
    • Address
    • Destination Alias
    • Duration
    • Call State
    • Call
    • Protocol
    • Bandwidth
    • Call Type