Cisco IOS XE 3S Release Notes
Related Documentation
Downloads: This chapterpdf (PDF - 504.0KB) The complete bookPDF (PDF - 3.73MB) | Feedback

Related Documentation for Cisco IOS XE 3S Releases

Table Of Contents

Related Documentation for Cisco IOS XE 3S Releases

Platform-Specific Documents

Cisco Feature Navigator

Error Message Documentation for Cisco IOS XE 3S

Cisco IOS XE 3S Software Documentation Set


Related Documentation for Cisco IOS XE 3S Releases


The following sections describe the documentation available for the Cisco ASR 1000 Series Routers and the Cisco ASR 903 Series Router for Cisco IOS XE 3S releases. These documents consist of hardware and software installation guides, system error messages, and other documents.

Documentation is available as printed manuals or electronic documents, except for feature modules, which are available online on cisco.com.

This chapter contains the following sections:

Platform-Specific Documents

Cisco Feature Navigator

Error Message Documentation for Cisco IOS XE 3S

Cisco IOS XE 3S Software Documentation Set

Platform-Specific Documents

The following platform-specific documents are available for the Cisco ASR 1000 Series Routers on Cisco.com:

Cisco ASR 903 Router Chassis Software Configuration Guide

Describes the ISSU process on the Cisco ASR 903 Series Routers.

http://www.cisco.com/en/US/docs/wireless/asr_900/software/guide/chassis/ASR903-Chassis-SW.html

Cisco ASR 1000 Series Aggregation Services Routers Documentation Roadmap

Provides an online directory to quickly access publications for the Cisco ASR 1000 Series Routers.

http://www.cisco.com/en/US/docs/routers/asr1000/roadmap/asr1000rm.html

Cisco ASR 1002 Quick Start Guide

Provides a summary of the hardware installation guide for the Cisco ASR 1002 Router.

http://www.cisco.com/en/US/docs/routers/asr1000/quick/start/guide/asr1_qs2.html

Cisco ASR 1002-F Quick Start Guide

Provides a summary of the hardware installation guide for the Cisco ASR 1002-F Router.

http://www.cisco.com/en/US/docs/routers/asr1000/quick/start/guide/asr1_qs2F.html

Cisco ASR 1004 Quick Start Guide

Provides a summary of the hardware installation guide for the Cisco ASR 1004 Router.

http://www.cisco.com/en/US/docs/routers/asr1000/quick/start/guide/asr1_qs4.html

Cisco ASR 1006 Quick Start Guide

Provides a summary of the hardware installation guide for the Cisco ASR 1006 Router.

http://www.cisco.com/en/US/docs/routers/asr1000/quick/start/guide/asr1_qs6.html

Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide

Provides instructions for installing the Cisco ASR 1000 Series Routers and replacing or upgrading field-replaceable units (FRUs).

http://www.cisco.com/en/US/docs/routers/asr1000/install/guide/asr1routers/asr1higV8.html

Cisco ASR 1000 Series Routers ROMmon Upgrade Guide

Contains procedures for upgrading the ROM monitor (ROMmon) on the Route Processors (RPs), Embedded Services Processors (ESPs), and Shared Port Adapter Interface Processors (SIPs) on the Cisco ASR 1000 Series Routers.

http://www.cisco.com/en/US/products/ps9343/prod_maintenance_guides_list.html

Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide

Contains platform-specific information that does not fit logically into the train-based Cisco IOS configuration guides.

http://www.cisco.com/en/US/docs/routers/asr1000/configuration/guide/chassis/asrswcfg.html

Cisco ASR 1000 Series Aggregation Services Routers Operations and Maintenance Guide

Provides operations and maintenance information that is specific to the Cisco ASR 1000 Series Routers.

http://www.cisco.com/en/US/docs/routers/asr1000/operations/guide/asr1000ops.html

Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide

Describes how to install the supported SIPs and SPAs on the Cisco ASR 1000 Series Routers and how to troubleshoot the installation.

http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/ASR1000/asr_sip_spa_hw.html

Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide

Describes the configuration and troubleshooting of SPA interface processors (SIPs) and shared port adapters (SPAs) that are supported on the Cisco ASR 1000 Series Routers.

http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/ASR1000/ASRspasw.html

Cisco ASR 1000 Series Aggregation Services Routers MIB Specifications Guide

Describes the implementation of the Management Information Base (MIB) protocol on the Cisco ASR 1000 Series Routers.

http://www.cisco.com/en/US/docs/routers/asr1000/mib/guide/asr1kmib.html

Cisco ASR 1000 Embedded Services Processor 10G Non Crypto Capable New Feature

Provides restrictions and specific information related to the Cisco ASR 1000 Embedded Services Processor 10G Non Crypto Capable feature.

http://www.cisco.com/en/US/docs/routers/asr1000/feature/guides/ASR_depop.html

Cisco Unified Border Element (SP Edition) Configuration Guide: Unified Model

Describes the Cisco Unified Border Element (SP Edition) functions, features, and configuration tasks. The name Cisco Unified Border Element (SP Edition) replaces the Integrated Session Border Controller name. Introduces the unified model and a new unified feature set supported in Cisco IOS XE Release 2.4 on the Cisco Unified Border Element (SP Edition). A comprehensive guide for the Cisco Unified Border Element (SP Edition) feature on the Cisco ASR 1000 Series Routers.

http://www.cisco.com/en/US/docs/routers/asr1000/configuration/guide/sbcu/2_xe/sbcu_2_xe_book.html

Cisco Unified Border Element (SP Edition) Command Reference: Unified Model

Describes the commands used by the Cisco Unified Border Element (SP Edition) on the Cisco ASR 1000 Series Routers to configure, debug, and show statistics. The name Cisco Unified Border Element (SP Edition) replaces the Integrated Session Border Controller name. Introduces new commands supported in the unified model on Cisco Unified Border Element (SP Edition) for Cisco IOS XE Release 2.4.

http://www.cisco.com/en/US/docs/ios/sbc/command/reference/sbcu_book.html

Cisco IOS XE Integrated Session Border Controller Configuration Guide for the Cisco ASR 1000 Series Aggregation Services Routers

Describes the Integrated Session Border Controller (SBC) functions, features, and configuration tasks. A comprehensive guide for the Integrated Session Border Controller feature on the Cisco ASR 1000 Series Routers.

http://www.cisco.com/en/US/docs/routers/asr1000/configuration/guide/sbc/2_xe/sbc_2_xe_book.html

Cisco IOS Integrated Session Border Controller Command Reference

Describes the commands used by the Integrated Session Border Controller on the Cisco ASR 1000 Series Routers to configure, debug, and show statistics.

http://www.cisco.com/en/US/docs/ios/sbc/command/reference/sbc_book.html

NAT and Firewall ALG Support on Cisco ASR 1000 Series Routers matrix

Summarizes Network Address Translation (NAT) and Firewall Application Layer Gateway (ALG) feature support on Cisco ASR 1000 Series Routers in Cisco IOS XE  Release 2.1.0 and later releases.

http://www.cisco.com/en/US/docs/routers/asr1000/technical_references/asr1000alg_support.pdf

Cisco IOS XE System Message Guide

Describes non-IOS messages specific to the Cisco ASR 1000 Series Routers.

http://www.cisco.com/en/US/docs/ios/system/messages/guide/xemsg01.html

Regulatory Compliance and Safety Information for the Cisco ASR 1000 Series Aggregation Services Routers

Provides international agency compliance, safety, and statutory information and translations for the safety warnings for the Cisco ASR 1000 Series Routers.

http://www.cisco.com/en/US/docs/routers/asr1000/rcsi/asr1rcsi.html

On Cisco.com at:

Products and Services: Routers: Cisco ASR 1000 Series Aggregation Services Routers

Cisco Feature Navigator

Cisco Feature Navigator is a web-based tool that enables you to quickly determine which Cisco IOS, Catalyst OS, and Cisco IOS XE software images support a specific set of features and which features are supported in a specific Cisco IOS image. You can search by feature or release. Under the release section, you can compare releases side by side to display both the features unique to each software release and the features in common.

Cisco Feature Navigator is updated regularly when major Cisco IOS software releases and technology releases occur. For the most current information, go to the Cisco Feature Navigator home page at the following location:

http://www.cisco.com/go/fn

Error Message Documentation for Cisco IOS XE 3S

Information about error messages for Cisco IOS XE Release 3S and later IOS XE releases can be found in the following locations:

Cisco IOS XE System Message Guide

Documents non-IOS messages specific to the Cisco ASR 1000 Series Routers.

http://www.cisco.com/en/US/docs/ios/system/messages/guide/xemsg01.html

Cisco IOS Release 12.2SB System Message Guide

Documents all messages available in Cisco IOS Release 12.2SB, which is a parent release for the Cisco IOS subpackage in Cisco IOS XE Release 2.

http://www.cisco.com/en/US/docs/ios/system/messages/guide/consol_smg.html

Cisco IOS Release 12.2SR System Message Guide

Documents all messages available in Cisco IOS Release 12.2SR, which is a parent release for the Cisco IOS subpackage in Cisco IOS XE Release 2.

http://www.cisco.com/en/US/docs/ios/system/messages/guide/consol_smg.html

Cisco IOS Error Message Decoder

The Cisco IOS Error Message Decoder is an online tool available to all registered Cisco.com users for researching and resolving error messages. This tool provides you with an explanation of the error message, a recommended action, and links to suggested online Cisco technical support resources.

http://www.cisco.com/pcgi-bin/Support/Errordecoder/index.cgi

Cisco IOS XE 3S Software Documentation Set

The Cisco IOS XE 3S software documentation set consists of Cisco IOS XE 3S configuration guides and Cisco IOS command references. The configuration guides are consolidated platform-independent configuration guides organized and presented by technology. There is one set of configuration guides for the Cisco IOS XE Release 2 release train and another for the Cisco IOS XE 3S release train. However, there is only one set of command references because they are platform independent—Cisco IOS command references support all Cisco platforms that are running any Cisco IOS or Cisco IOS XE software image.


Note All content included in Cisco IOS XE Release 2 configuration guides is shared with and included in the Cisco IOS XE 3S configuration guides. As a result, some information for features introduced as part of Cisco IOS XE 3S may also be displayed in Cisco IOS XE Release 2 configuration guides.


Information in the configuration guides often includes related content that is shared across software releases and platforms. Some features referenced in these configuration guides may not be supported by Cisco IOS XE Release 2 and later releases or by the Cisco ASR 1000 Series Aggregation Services Routers. For the latest feature information and caveats in Cisco IOS XE Release 2 and later releases, see the Features, Important Notes, and Caveats section of these release notes.

Additionally, you can use Cisco Feature Navigator to find information about feature, platform, and software image support. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on cisco.com is not required.