Cisco IOS Software Feature Removal: CPP, CMPC, CTRC, LNM, TR-ISL, and TR-LANE
ErrorMessage : Error while constructing the Hinav

null
Downloads: This chapterpdf (PDF - 86.0KB) | Feedback

Cisco IOS Software Feature Removal: CPP, CMPC, CTRC, LNM, TR-ISL, and TR-LANE

Table Of Contents

Cisco IOS Software Feature Removal:
CPP, CMPC, CTRC, LNM, TR-ISL, and TR-LANE

Token Ring Inter-Switch Link

Combinet Packet Protocol

Cisco Multipath Channel

Cisco Transaction Connection

LAN Network Manager

Token Ring LAN Emulation


Cisco IOS Software Feature Removal:
CPP, CMPC, CTRC, LNM, TR-ISL, and TR-LANE


Feature History

Release
Modification

12.3(2)T

Features described in this feature module were removed in Cisco IOS Release 12.3(2)T.

12.3(4)T

Features described in this feature module were removed in Cisco IOS Release 12.3(4)T.


The Cisco IOS Software Feature Removal feature is an engineering project to permanently remove selected legacy features (or components) from the Cisco IOS code. These features will not be available in future releases of Cisco IOS software.

The legacy feature that has been removed as of Release 12.3(2)T is as follows:

Token Ring Inter-Switch Link

The legacy feature that has been removed as of Release 12.3(4)T are as follows:

Combinet Packet Protocol

Cisco Multipath Channel

Cisco Transaction Connection

LAN Network Manager

Token Ring LAN Emulation

This document lists the commands that have been removed from or modified in Cisco IOS software with the removal of a specified feature.


Note Commands that have been modified may not all be listed in this document.


Token Ring Inter-Switch Link

The following commands have been removed from Cisco IOS software with the removal of the Token Ring Inter-Switch Link (TRISL) feature. Please note that not all commands that may have been modified are listed.

encapsulation tr-isl trbrf-vlan

multiring trcrf-vlan

source-bridge trcrf-vlan

Combinet Packet Protocol

The following commands have been removed from Cisco IOS software with the removal of the Combinet Packet Protocol (CPP) feature. Please note that not all commands that may have been modified are listed.

cpp authentication

cpp callback accept

encapsulation cpp

debug cpp negotiation

debug cpp packet

debug cpp event

Cisco Multipath Channel

The following commands have been removed from Cisco IOS software with the removal of the Cisco Multipath Channel (CMPC) feature. Please note that not all commands that may have been modified are listed.

cmpc

tg (CMPC)

Cisco Transaction Connection

The following commands have been removed from Cisco IOS software with the removal of the Cisco Transaction Connection (CTRC) feature. Please note that not all commands that may have been modified are listed.

clear dbconn connection

clear dbconn statistic

clear txconn connection

clear txconn statistic

clear txconn transaction

dbconn license

dbconn pem

dbconn ping

dbconn server

dbconn tcpserver

show dbconn connection

show dbconn license

show dbconn ports

show dbconn server

show dbconn statistic

show dbconn wlm

show txconn connection

show txconn destination

show txconn license

show txconn route

show txconn server

show txconn statistic

show txconn transaction

txconn destination

txconn license

txconn ping

txconn route

txconn server

LAN Network Manager

The following commands have been removed from Cisco IOS software with the removal of the LAN Network Manager (LNM) feature. Please note that not all commands that may have been modified are listed.

lnm alternate

lnm crs

lnm disabled

lnm express-buffer

lnm loss-threshold

lnm password

lnm pathtrace-disabled

lnm rem

lnm rps

lnm snmp-only

lnm softerr

show lnm bridge

show lnm config

show lnm interface

show lnm ring

show lnm station

Token Ring LAN Emulation

The following commands have been modified in Cisco IOS software with the removal of the Token Ring LAN Emulation (TR-LANE) feature. Please note that not all commands that may have been modified are listed.

lane client

lane server-bus