Preface
This preface describes the objectives and organization of this document and explains how to find additional information on related products and services. This preface contains the following sections:
•Document Revision History
•Objectives
•Organization
•Related Documentation
•Obtaining Documentation, Obtaining Support, and Security Guidelines
Document Revision History
The Document Revision History table below records technical changes to this document.
|
|
|
OL-10589-02 |
July, 2007 |
This version corrects an interface address error. |
Objectives
This document describes how to install and configure the PA-4R-DTR Dedicated Token Ring port adapter (PA-4R-DTR[=]), hereafter referred to as the PA-4R-DTR, which is used in the following platforms:
•Cisco 7100 series routers, consisting of the Cisco 7120 series and Cisco 7140 series
•Cisco 7200 series routers, consisting of the two-slot Cisco 7202, four-slot Cisco 7204 and Cisco 7204VXR, and the six-slot Cisco 7206 and Cisco 7206VXR
•VIP2 in Cisco 7500 series and Cisco 7000 series routers with the 7000 Series Route Switch Processor (RSP7000) and 7000 Series Chassis Interface (RSP7000CI)
Organization
This document contains the following chapters:
:
|
|
|
Chapter 1 |
Overview |
Describes the PA-4R-DTR and its LED displays, cables, and receptacles. |
Chapter 2 |
Preparing for Installation |
Describes safety considerations, tools required, and procedures you should perform before the actual installation. |
Chapter 3 |
Removing and Installing Port Adapters |
Describes the procedures for installing and removing PA-4R-DTR in the supported platforms. |
Chapter 4 |
Configuring the PA-4R-DTR |
Provides instructions for configuring the PA-4R-DTR on the supported platforms. |
Related Documentation
Your router or switch and the Cisco IOS software running on it contain extensive features and functionality, which are documented in the following resources:
•Cisco IOS software:
For configuration information and support, refer to the modular configuration and modular command reference publications in the Cisco IOS software configuration documentation set that corresponds to the software release installed on your Cisco hardware.
Note You can access Cisco IOS software configuration and hardware installation and maintenance documentation on the World Wide Web at http://www.cisco.com, http://www-china.cisco.com, or http://www-europe.cisco.com.
•Cisco 7100 series routers:
–For hardware installation and maintenance information, refer to the Cisco 7100 Series VPN Router Installation and Configuration Guide that shipped with your Cisco 7100 series router.
–For information on setting up a Virtual Private Network, refer to the Cisco 7100 Series VPN Configuration Guide.
•Cisco 7200 series routers:
–For port adapter hardware and memory configuration guidelines, refer to the Cisco 7200 Series Port Adapter Hardware Configuration Guidelines.
–For hardware installation and maintenance information (including the Cisco 7206 or Cisco 7206VXR as a router shelf in a Cisco AS5800 Universal Access Server), refer to the installation and configuration guide that shipped with your Cisco 7200 series router.
–For information on Network Processing Engines or Network Services Engines, refer to the Network Processing Engine and Network Services Engine Installation and Configuration publication.
•Cisco 7200 VXR routers:
For hardware installation and maintenance information, refer to the Cisco 7200 VXR Installation and Configuration Guide that shipped with your Cisco 7200 VXR router.
•VIP2 in Cisco 7000 series and Cisco 7500 series routers:
For hardware installation and maintenance information, refer to the following publications:
–The installation and configuration guide that shipped with your Cisco 7000 series or Cisco 7500 series router
–Second-Generation Versatile Interface Processor (VIP2) Installation and Configuration
•For international agency compliance, safety, and statutory information for WAN interfaces:
–Site Preparation and Safety Guide
–Regulatory Compliance and Safety Information for the Cisco 7000 Series Routers
–Regulatory Compliance and Safety Information for Cisco 7100 Series VPN Routers
–Regulatory Compliance and Safety Information for the Cisco 7200 Series Routers
–Regulatory Compliance and Safety Information for the Cisco 7500 Series Routers
•To view Cisco documentation or obtain general information about the documentation, refer to the following sources:
–Obtaining Documentation, Obtaining Support, and Security Guidelines
–Customer service at 800 553-6387 or 408 526-7208. Customer service hours are 5:00 a.m. to 6:00 p.m. Pacific time, Monday through Friday (excluding Cisco-observed holidays). You can also send e-mail to cs-rep@cisco.com.
–Cisco Information Packet that shipped with your router or switch.
Obtaining Documentation, Obtaining Support, and Security Guidelines
For information on obtaining documentation, obtaining support, providing documentation feedback, security guidelines, and also recommended aliases and general Cisco documents, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised technical documentation at: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html.