Cisco Wide Area Application Services Command Reference (Software Version 4.0.7)
CLI Command Summary by Mode
Downloads: This chapterpdf (PDF - 159.0KB) The complete bookPDF (PDF - 10.22MB) | Feedback

CLI Command Summary by Mode

Table Of Contents


CLI Command Summary by Mode

Configuration Mode Commands

(config) aaa accounting 3-252

(config) adapter 3-256

(config) alarm overload-detect 3-257

(config) asset 3-259

(config) authentication 3-260

(config) auto-register 3-265

(config) banner 3-268

(config) bypass 3-271

(config) cdp 3-273

(config) central-manager 3-275

(config) clock 3-278

(config) cms 3-282

(config) device mode 3-284

(config) disk 3-286

(config) end 3-288

(config) exec-timeout 3-289

(config) exit 3-290

(config) help 3-291

(config) hostname 3-293

(config) inetd 3-294

(config) interface 3-295

(config) ip 3-302

(config) ip access-list 3-305

(config) kerberos 3-308

(config) kernel 3-310

(config) line 3-311

(config) logging 3-312

(config) no 3-316

(config) ntp 3-318

(config) policy-engine application classifier 3-319

(config) policy-engine application map adaptor EPM 3-321

(config) policy-engine application map adaptor WAFS transport 3-323

(config) policy-engine application map basic delete 3-325

(config) policy-engine application map basic disable 3-326

(config) policy-engine application map basic insert 3-327

(config) policy-engine application map basic list 3-328

(config) policy-engine application map basic move 3-329

(config) policy-engine application map basic name 3-331

(config) policy-engine application map other optimize DRE 3-333

(config) policy-engine application map other optimize full 3-335

(config) policy-engine application map other pass-through 3-336

(config) policy-engine application name 3-337

(config) policy-engine config 3-339

(config) port-channel 3-340

(config) primary-interface 3-341

(config) print-services 3-343

(config) radius-server 3-346

(config) smb-conf 3-348

(config) snmp-server access-list 3-352

(config) snmp-server community 3-353

(config) snmp-server contact 3-355

(config) snmp-server enable traps 3-356

(config) snmp-server group 3-359

(config) snmp-server host 3-361

(config) snmp-server location 3-363

(config) snmp-server mib 3-364

(config) snmp-server notify inform 3-366

(config) snmp-server user 3-367

(config) snmp-server view 3-369

(config) sshd 3-370

(config) ssh-key-generate 3-373

(config) tacacs 3-374

(config) tcp 3-377

(config) telnet enable 3-380

(config) tfo auto-discovery 3-381

(config) tfo optimize 3-382

(config) tfo tcp keepalive 3-383

(config) tfo tcp optimized-mss 3-384

(config) tfo tcp optimized-receive-buffer 3-385

(config) tfo tcp optimized-send-buffer 3-386

(config) tfo tcp original-mss 3-387

(config) tfo tcp original-receive-buffer 3-388

(config) tfo tcp original-send-buffer 3-389

(config) transaction-logs 3-390

(config) username 3-397

(config) wccp access-list 3-400

(config) wccp flow-redirect 3-403

(config) wccp router-list 3-404

(config) wccp shutdown 3-405

(config) wccp slow-start 3-407

(config) wccp tcp-promiscuous 3-409

(config) wccp version 3-411

(config) windows-domain 3-413

EXEC Mode Commands

cd 3-3

clear 3-4

clock 3-7

cms 3-8

configure 3-11

copy cdrom 3-12

copy compactflash 3-13

copy disk 3-14

copy ftp 3-15

copy http 3-19

copy running-config 3-23

copy startup-config 3-24

copy sysreport 3-25

copy system-status 3-27

copy tech-support 3-28

copy tftp 3-29

cpfile 3-31

debug 3-32

delfile 3-38

deltree 3-39

dir 3-40

disable 3-42

disk 3-43

dnslookup 3-47

enable 3-48

exit 3-49

find-pattern 3-50

help 3-52

install 3-53

less 3-54

lls 3-55

ls 3-57

mkdir 3-59

mkfile 3-60

ntpdate 3-61

ping 3-62

pwd 3-63

reload 3-64

rename 3-65

restore 3-66

rmdir 3-70

scp 3-71

script 3-73

setup 3-74

show aaa accounting 3-75

show adapter 3-77

show alarms 3-78

show arp 3-81

show authentication 3-82

show auto-register 3-84

show banner 3-85

show bypass 3-86

show cdp 3-87

show clock 3-93

show cms 3-95

show debugging 3-98

show device-mode 3-99

show disks 3-101

show flash 3-105

show hardware 3-106

show hosts 3-109

show inetd 3-110

show interface 3-111

show inventory 3-116

show ip access-list 3-117

show ip routes 3-119

show kerberos 3-120

show logging 3-121

show memory 3-122

show ntp 3-123

show policy-engine application 3-125

show policy-engine status 3-129

show print-services 3-131

show processes 3-133

show radius-server 3-135

show running-config 3-137

show services 3-138

show smb-conf 3-139

show snmp 3-141

show ssh 3-147

show standby 3-148

show startup-config 3-150

show statistics authentication 3-152

show statistics content-distribution-network 3-153

show statistics dre 3-154

show statistics dre connection 3-156

show statistics dre peer 3-158

show statistics epm 3-161

show statistics icmp 3-162

show statistics ip 3-164

show statistics netstat 3-167

show statistics radius 3-168

show statistics services 3-170

show statistics snmp 3-171

show statistics tacacs 3-173

show statistics tcp 3-175

show statistics tfo 3-179

show statistics udp 3-181

show statistics wccp 3-182

show statistics windows-domain 3-187

show sysfs 3-189

show tacacs 3-190

show tcp 3-192

show tech-support 3-194

show telnet 3-197

show tfo accelerators 3-198

show tfo auto-discovery 3-199

show tfo bufpool 3-201

show tfo connection 3-203

show tfo filtering 3-205

show tfo status 3-207

show tfo synq 3-208

show transaction-logging 3-209

show user 3-210

show users administrative 3-211

show version 3-213

show wccp 3-214

show windows-domain 3-220

shutdown 3-222

snmp trigger 3-225

ssh 3-228

tcpdump 3-229

telnet 3-230

terminal 3-231

tethereal 3-232

traceroute 3-234

transaction-log 3-235

type 3-236

type-tail 3-237

undebug 3-239

wafs 3-244

whoami 3-246

windows-domain 3-247

write 3-250

Extended ACL Configuration Mode Commands

(config-ext-nacl) delete 3-452

(config-ext-nacl) deny 3-453

(config-ext-nacl) exit 3-458

(config-ext-nacl) list 3-459

(config-ext-nacl) move 3-460

(config-ext-nacl) permit 3-461

Interface Configuration Mode Commands

(config-if) autosense 3-416

(config-if) bandwidth 3-417

(config-if) cdp 3-419

(config-if) exit 3-420

(config-if) failover timeout 3-421

(config-if) full-duplex 3-422

(config-if) half-duplex 3-423

(config-if) inline 3-424

(config-if) ip 3-426

(config-if) ip access-group 3-428

(config-if) mtu 3-429

(config-if) no 3-430

(config-if) shutdown 3-432

(config-if) standby 3-433

Standard ACL Configuration Mode Commands

(config-std-nacl) delete 3-441

(config-std-nacl) deny 3-442

(config-std-nacl) exit 3-444

(config-std-nacl) list 3-445

(config-std-nacl) move 3-446

(config-std-nacl) permit 3-447