Cisco Wide Area Application Services Command Reference (Software Version 4.0.7)
CLI Commands
Downloads: This chapterpdf (PDF - 41.0KB) The complete bookPDF (PDF - 10.22MB) | Feedback

CLI Commands

Table Of Contents

CLI Commands


CLI Commands


This chapter provides detailed information for the following types of CLI commands for the WAAS software:

EXEC mode commands you can enter after you log in to the WAAS device. See the "EXEC Mode Commands" section for a complete listing of commands.

Global configuration mode commands that you can enter after you log in to the WAAS device and access global configuration mode. See the "Configuration Mode Commands" section for a complete listing of commands.

Interface configuration mode commands that you can enter after you access global configuration mode (see the "Interface Configuration Mode Commands" section for a complete listing of commands.

Standard or extended ACL configuration mode commands that you can enter after you access global configuration mode (see the "Standard ACL Configuration Mode Commands" and "Extended ACL Configuration Mode Commands" sections for a complete listing of commands.

The description of each command includes the following:

The syntax of the command, default values, command modes, usage guidelines, and examples.

Any related commands, when appropriate

See Chapter 1, "Using the WAAS Command-Line Interface" for a discussion about using the CLI and about the CLI command modes.