Cisco Unified MeetingPlace

Field Notice: MeetingPlace Server 8112 Large Volume of Calls Received While a System is Restarting Can Cause ISDN-PRI Ports to Get Stuck

May 19, 2004

Products Affected



Cisco MeetingPlace Server 8112 (M3)

Version 5.1.0x

Problem Description

Large volume of calls received while a system is restarting can cause some ISDN-PRI ports to get stuck.

All T1 PRI and E1 system should apply the 5.1.0ad cpserver hot fix.

Problem Symptoms

Calls landing on the stuck ports might give undesirable results. For example, a busy or fast busy.





A hot fix is available in the 5.1.0ad cpserver module. 5.1.0z cptester must also be applied if it has not been previously installed.

For More Information

If you require further assistance, or if you have any further questions regarding this field notice, please contact the Cisco Systems Technical Assistance Center (TAC) by one of the following methods:

Receive Email Notification For New Field Notices

Product Alert Tool - Set up a profile to receive email updates about reliability, safety, network security, and end-of-sale issues for the Cisco products you specify.