Guest

Cisco Unified MeetingPlace

Field Notice: Inconsistency in Scheduling a Meeting That Has a Start Time Earlier than Current Time


May 19, 2004


Products Affected

Product

Comments

Cisco MeetingPlace Server 8112 (M3)

R5.0.2q and R5.1.0x

Problem Description

A time in the past is allowed to be specified when scheduling a meeting only if it is within the same hour of the current time. This creates an inconsistency where if the current time just past the hour (e.g. 2:01), then a time right before the hour (e.g. 1:59) specified as the meeting start time will result in a meeting that cannot be scheduled.

The correct behavior should be any start time less then 30 minutes prior to the current time is allowed. However, the actual start time when the meeting is scheduled is the current time.

Problem Symptoms

Occasional failure to schedule an immediate meeting.

Workaround/Solution

WORKAROUND:

Change the meeting start time and schedule the meeting again.

RESOLUTION:

Fixed in vui hot fix 5.0.2v and above, and, 5.1.0aa and above. Please contact Cisco MeetingPlace Support (TAC) to apply this hot fix.

For More Information

If you require further assistance, or if you have any further questions regarding this field notice, please contact the Cisco Systems Technical Assistance Center (TAC) by one of the following methods:

Receive Email Notification For New Field Notices

Product Alert Tool - Set up a profile to receive email updates about reliability, safety, network security, and end-of-sale issues for the Cisco products you specify.