Summary

• A vulnerability in Cisco access point (AP) software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device.

  This vulnerability is due to insufficient validation of certain parameters within 802.11 frames. An attacker could exploit this vulnerability by sending a wireless 802.11 association request frame with crafted parameters to an affected device. A successful exploit could allow the attacker to cause an unexpected reload of an affected device, resulting in a DoS condition.

  Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.

  This advisory is available at the following link:
  https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ap-assoc-dos-D2SunWK2

Affected Products

• Vulnerable Products

  This vulnerability affects the following Cisco products if they are running a vulnerable software release:

  • Business 150 APs and 151 Mesh Extenders
  • Catalyst 9100 APs

  For information about which Cisco software releases are vulnerable, see the Fixed Software section of this advisory.

  Products Confirmed Not Vulnerable

  Only products listed in the Vulnerable Products section of this advisory are known to be affected by this vulnerability.

  Cisco has confirmed that this vulnerability does not affect any Cisco access point series that is not listed in the Vulnerable Products section of this advisory.

Workarounds

• There are no workarounds that address this vulnerability.

Fixed Software

• Cisco has released free software updates that address the vulnerability described in this advisory. Customers with service contracts that entitle them to regular software updates should obtain security fixes through their usual update channels.

  Customers may only install and expect support for software versions and feature sets for which they have purchased a license. By installing, downloading, accessing, or otherwise using such software upgrades, customers agree to follow the terms of the Cisco software license:
  https://www.cisco.com/c/en/us/products/end-user-license-agreement.html

  Additionally, customers may only download software for which they have a valid license, procured from Cisco directly, or through a Cisco authorized reseller or partner. In most cases this will be a maintenance upgrade to software that was previously purchased. Free security software updates do not entitle customers to a new software license, additional software feature sets, or major revision upgrades.

  The Cisco Support and Downloads page on Cisco.com provides information about licensing and downloads. This page can also display customer device support coverage for customers who use the My Devices tool.

  When considering software upgrades, customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories page, to determine exposure and a complete upgrade solution.

  In all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.

  Customers Without Service Contracts

  Customers who purchase directly from Cisco but do not hold a Cisco service contract and customers who make purchases through third-party vendors but are unsuccessful in obtaining fixed software through their point of sale should obtain upgrades by contacting the Cisco TAC: https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html

  Customers should have the product serial number available and be prepared to provide the URL of this advisory as evidence of entitlement to a free upgrade.

  Fixed Releases

  In the following tables, the left column lists Cisco software releases. The center column indicates whether a release is affected by the vulnerability described in this advisory and the first release that includes the fix for this vulnerability. The right column indicates whether a release is affected by all the vulnerabilities described in this bundle of advisories and which release includes fixes for those vulnerabilities.

  APs Managed by Cisco Wireless LAN Controller (WLC) or Mobility Express (ME)

  Cisco Wireless LAN Controller Software Release	First Fixed Release
  8.8 and earlier	Not vulnerable.
  8.9	Migrate to a fixed release.
  8.10	8.10.171.0

  APs Managed by Catalyst 9800 Series Wireless Controller or Embedded Wireless Controller (EWC)

  Cisco Catalyst 9800 Series Wireless Controller Software Release	First Fixed Release
  Earlier than 16.12	Not vulnerable.
  16.12	16.12.8
  17.1	Migrate to a fixed release.
  17.2	Migrate to a fixed release.
  17.3	17.3.5
  17.4	Migrate to a fixed release.
  17.5	Migrate to a fixed release.
  17.6	17.6.3
  17.7	Migrate to a fixed release.
  17.8	Not vulnerable.
  17.9	Not vulnerable.

  Business APs and Mesh Extenders

  Cisco Business 150 AP and 151 Mesh Extender Software Release	First Fixed Release
  10.2.2 and earlier	Migrate to a fixed release.
  10.3.2	10.3.2.0

  The Cisco Product Security Incident Response Team (PSIRT) validates only the affected and fixed release information that is documented in this advisory.

Exploitation and Public Announcements

• The Cisco PSIRT is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.

Source

• Cisco would like to thank Luke Jenkins of Weber State University for reporting this vulnerability.

URL

• https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ap-assoc-dos-D2SunWK2

Revision History

• Version	Description	Section	Status	Date
  1.0	Initial public release.	—	Final	2023-MAR-22

  Show Less

---