Guest

Cisco MDS 9100 Series Multilayer Fabric Switches

End-of-Sale and End-of-Life Announcement for the Cisco MDS 9140 1/2-Gbps 40-Port Fibre Channel Intelligent Fabric Switch

  • Viewing Options

  • PDF (137.6 KB)
  • Feedback
EOL6374-Amended

Cisco announces the end-of-sale and end-of life dates for the Cisco MDS 9140 1/2-Gbps 40-Port Fibre Channel Intelligent Fabric Switch. The last day to order the affected product(s) is October 9, 2008. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available under the terms and conditions of customers' service contract.

Table 1. End-of-Life Milestones and Dates for the Cisco MDS 9140 1/2-Gbps 40-Port Fibre Channel Intelligent Fabric Switch

Milestone

Definition

Date

End-of-Life Announcement Date

The date the document that announces the end of sale and end of life of a product is distributed to the general public.

April 10, 2008

End-of-Sale Date

The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.

October 9, 2008

Last Ship Date:
HW

The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.

January 7, 2009

End of Routine Failure Analysis Date:
HW

The last-possible date a routine failure analysis may be performed to determine the cause of hardware product failure or defect.

October 9, 2009

End of New Service Attachment Date:
HW

For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.

October 9, 2009

End of Service Contract Renewal Date:
HW

The last date to extend or renew a service contract for the product.

January 4, 2013

Last Date of Support:
HW

The last date to receive applicable service and support for the product as entitled by active service contracts or by warranty terms and conditions. After this date, all support services for the product are unavailable, and the product becomes obsolete.

October 31, 2013

HW = Hardware OS SW = Operating System Software App. SW = Application Software
The recommended replacement for the Cisco MDS 9140 1/2-Gbps 40-port Fibre Channel multilayer intelligent fabric switch is the Cisco MDS 9148 Multilayer Fabric Switch. The Cisco MDS 9148 Multilayer Fabric Switch, with 48 Fibre Channel ports capable of speeds of 8, 4, 2, and 1 Gbps, offers outstanding value by providing flexibility, high availability, security, and ease of use at an affordable price in a compact 1-rack-unit (1RU) form factor. Information about the Cisco MDS 9148 Multilayer Fabric Switch can be found at http://www.cisco.com/en/US/products/ps10703/index.html.

Table 2. Product Part Numbers Affected by This Announcement

End-of-Sale Product
Part Number

Product Description

Replacement Product Part Number

Replacement Product Description

Additional Information

DS-1RU-FAN

MDS 1RU Fan Tray

There is currently no replacement product available for this product.

   

DS-1RU-FAN=

MDS 9100 Fan Tray, Spare

There is currently no replacement product available for this product.

   

DS-C9140-K9

MDS 9140 40-Port Fibre Channel Fabric Switch

DS-C9148-16P-K9

MDS 9148 base with 16 active ports

-

Product Migration Options

Customers are encouraged to migrate to the Cisco MDS 9148 Multilayer Fabric Switch. Information about this product can be found at: http://www.cisco.com/en/US/products/ps10703/index.html.

Table 3. Product Comparisons

Feature

Cisco MDS 9140 1/2-Gbps 40-Port Fibre Channel Intelligent Fabric Switch

Cisco MDS 9148 Multilayer Fabric Switch

FC Port configuration

1/2-Gbps autosensing, optionally configurable

8-, 4-, 2-, and 1-Gbps autosensing with 8 Gbps of dedicated bandwidth per port

Total # of 8G FC Ports

0

16 to 48

10Gb Stacking Support

No

No

Redundant Power Supplies

Yes

Yes

Easy Config Wizard

Yes

Yes

Intelligent Network Services-Virtual SANs (VSANs), ACLs, FCC, QoS

Yes

Yes

FICON Support

No

No

Comprehensive Services

Yes

Yes

Customers may be able to use the Cisco Technology Migration Program (TMP) where applicable to trade-in eligible products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, customers should work with their Cisco Partner or Cisco account team. Cisco Partners can find additional TMP information on Partner Central at http://www.cisco.com/web/partners/incentives_and_promotions/tmp.html
Customers may be able to continue to purchase Cisco MDS 9140 1/2-Gbps 40-Port Fibre Channel Intelligent Fabric Switch through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to: http://www.cisco.com/go/eos
Service prices for Cisco products are subject to change after the product End of Sale date
The Cisco Takeback and Recycle program helps businesses dispose properly of surplus products that have reached their end of useful life. The program is open to all business users of Cisco equipment and its associated brands and subsidiaries. For more information, go to: http://www.cisco.com/web/about/ac227/ac228/ac231/about_cisco_takeback_recycling.html

For More Information

For more information about the Cisco MDS 9148 Multilayer Fabric Switch, visit http://www.cisco.com/en/US/products/ps10703/index.html, or contact your local account representative.
For more information about the Cisco End-of-Life Policy, go to:
http://www.cisco.com/en/US/products/products_end-of-life_policy.html
For more information about the Cisco Product Warranties, go to:
http://www.cisco.com/en/US/products/prod_warranties_listing.html
To subscribe to receive end-of-life/end-of-sale information, go to:
http://www.cisco.com/cisco/support/notifications.html

Subscribe for RSS Notifications for End-of-Life and End-of-Sale Notices

To subscribe to the End-of-Life and End-of-Sale RSS Feed, insert the following URL into your RSS application: http://www.cisco.com/web/feeds/products/end_of_life_rss.xml
Any authorized translation issued by Cisco Systems or affiliates of this end-of-life Product Bulletin is intended to help customers understand the content described in the English version. This translation is the result of a commercially reasonable effort; however, if there are discrepancies between the English version and the translated document, please refer to the English version, which is considered authoritative.