Guest

Cisco 7200 Series Routers

End-of-Sale and End-of-Life Announcement for the Cisco 7200 Series Router NPE-225 Network Processing Engine and Respective Bundles, and Cisco 7200 Input/Output Controller C7200-I/O

  • Viewing Options

  • PDF (130.7 KB)
  • Feedback

EOL5471-Amended

Cisco announces the end-of-sale and end-of life dates for the Cisco 7200 Series Router NPE-225 Network Processing Engine and Respective Bundles, and Cisco 7200 Input/Output Controller C7200-I/O. The last day to order the affected product(s) is July 23, 2007. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available until the termination date of the contract, even if this date exceeds the Last Date of Support shown in Table 1.

Table 1. End-of-Life Milestones and Dates for the Cisco 7200 Series Router NPE-225 Network Processing Engine and Respective Bundles, and Cisco 7200 Input/Output Controller C7200-I/O

Milestone

Definition

Date

End-of-Life Announcement Date

The date the document that announces the end of sale and end of life of a product is distributed to the general public.

January 22, 2007

End-of-Sale Date

The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.

July 23, 2007

Last Ship Date: HW

The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.

October 21, 2007

End of Routine Failure Analysis Date: HW

The last-possible date a routine failure analysis may be performed to determine the cause of hardware product failure or defect.

July 22, 2008

End of New Service Attachment Date: HW

For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.

July 22, 2008

End of Service Contract Renewal Date: HW

The last date to extend or renew a service contract for the product.

October 18, 2011

Last Date of Support: HW

The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.

July 31, 2012

HW = Hardware OS SW = Operating System Software App. SW = Application Software

Table 2. Product Part Numbers Affected by This Announcement

End-of-Sale Product Part Number

Product Description

Replacement Product Part Number

Replacement Product Description

Additional Information

7204VXR/CPE

7204VXR w/ NPE-225, 2 FE I/O, choice of specified WAN PA

7206VXR/NPE-G2

7206VXR with NPE-G2 includes 3GigE/FE/E Ports and IP SW

-

7204VXR/CPE

7204VXR w/ NPE-225, 2 FE I/O, choice of specified WAN PA

CISCO7204VXR

Cisco 7204VXR, 4-slot chassis, 1 AC Supply w/IP Software

-

C7200-I/O

Cisco 7200 Input/Output Controller

C7200-I/O-2FE/E

Cisco 7200 Input/Output Controller with Dual 10/100 Ethernet

-

C7200-I/O

Cisco 7200 Input/Output Controller

C7200-I/O-GE+E

Cisco 7200 Input/Output Controller with GE and Ethernet

-

C7200-I/O=

Cisco 7200 Input/Output Controller, Spare

C7200-I/O-2FE/E=

Cisco 7200 Input/Output Controller with Dual 10/100 Ethernet

-

C7200-I/O=

Cisco 7200 Input/Output Controller, Spare

C7200-I/O-GE+E=

Cisco 7200 Input/Output Controller with GE and Ethernet

-

CISCO7204VXR/225

7204VXR Bundle with NPE-225 and I/O Controller with 2 FE/E

CISCO7204VXR

Cisco 7204VXR, 4-slot chassis, 1 AC Supply w/IP Software

-

MEM-I/O-FLC20M

Cisco 7200 I/O PCMCIA Flash Memory, 20 MB Option

See the Product Migration Options section below for detailed information on replacing this product.

   

MEM-I/O-FLC20M=

Cisco 7200 I/O PCMCIA Flash Memory, 20MB

See the Product Migration Options section below for detailed information on replacing this product.

   

MEM-SD-D-NPE-128MB

128MB Memory for NPE-225/NPE-300/NSE-1, Default

See the Product Migration Options section below for detailed information on replacing this product.

   

MEM-SD-NPE-128MB

128MB Memory for NPE-300/NPE-225/NPE-175 in 7200 Series

There is currently no replacement product available for this product.

   

MEM-SD-NPE-128MB=

128MB Memory Upgrade Kit for NPE-300/NPE-225/NPE-175

See the Product Migration Options section below for detailed information on replacing this product.

   

MEM-SD-NPE-256MB

2 128MB memory modules (256MB total) for the NPE-300 in 7200

There is currently no replacement product available for this product.

   

MEM-SD-NPE-256MB=

2 128MB memory modules (256MB total) for the NPE-300 in 7200

See the Product Migration Options section below for detailed information on replacing this product.

   

MEM-SD-NPE-64MB

64MB Memory for NPE-300/NPE-225/NPE-175 in 7200 Series

There is currently no replacement product available for this product.

   

MEM-SD-NPE-64MB=

64MB Memory Upgrade Kit for NPE-300/225/175

There is currently no replacement product available for this product.

   

MEM-SD-NSE-256MB

256MB Memory for NPE-225 or NSE-1 in 7200 Series

See the Product Migration Options section below for detailed information on replacing this product.

   

MEM-SD-NSE-256MB=

256MB Memory for NPE-225 or NSE-1 in 7200 Series, SPARE

See the Product Migration Options section below for detailed information on replacing this product.

   

NPE-225

Network Processing Engine NPE-225 (128MB default memory)

See the Product Migration Options section below for detailed information on replacing this product.

   

NPE-225=

Network Processing Engine 225 (128MB default memory)-spare

See the Product Migration Options section below for detailed information on replacing this product.

   

Product Migration Options

Customers are encouraged to migrate from the Cisco 7200 Series Router NPE-225 and respective 7200 NPE-225 network processing engine bundles to the Cisco 7200 Series Router NPE-G2 or NPE-G1 network processing engine and its respective bundles. Regarding the Cisco 7200 Input/Output Controller C7200-I/O,customers are encouraged to migrate to the input/output controller for Cisco 7200 Series Routers with part number C7200-I/O-GE+E= or C7200-I/O-2FE/E. More information can be found at: http://www.cisco.com/go/7200.
Customers can use the Cisco Technology Migration Program (TMP) to trade-in products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, customers should work with their Cisco Partner or Cisco account team. Cisco Partners can find additional TMP information on Partner Central at http://www.cisco.com/web/partners/pr11/incentive/tmp/index.html
Customers may be able to continue to purchase the Cisco 7200 Series Router NPE-225 Network Processing Engine and Respective Bundles, and Cisco 7200 Input/Output Controller C7200-I/O through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to: http://www.cisco.com/go/eos
Service prices for Cisco products are subject to change after the product End of Sale date.
The Cisco Takeback and Recycle program helps businesses dispose properly of surplus products that have reached their end of useful life. The program is open to all business users of Cisco equipment and its associated brands and subsidiaries. For more information, go to: http://www.cisco.com/web/about/ac227/ac228/ac231/about_cisco_takeback_recycling.html

For More Information

For more information about the Cisco 7200 Series Router NPE-G2,NPE-G1 or NPE-400 Network Processing Engine, visit http://www.cisco.com/go/7200, or contact your local account representative.
For more information about the Cisco End-of-Life Policy, go to:
To subscribe to receive end-of-life/end-of-sale information, go to:

Subscribe for RSS Notifications for End-of-Life and End-of-Sale Notices

To subscribe to the End-of-Life and End-of-Sale RSS Feed, insert the following URL into your RSS application: http://www.cisco.com/web/feeds/products/end_of_life_rss.xml
Any authorized translation issued by Cisco Systems or affiliates of this end-of-life Product Bulletin is intended to help customers understand the content described in the English version. This translation is the result of a commercially reasonable effort; however, if there are discrepancies between the English version and the translated document, please refer to the English version, which is considered authoritative.