EOL7249 - Amended
Cisco announces the end-of-sale and end-of-life dates for the Cisco 1841 Integrated Services Router. The last day to order the affected product(s) is November 1, 2011. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available under the terms and conditions of customers' service contract.
Table 1. End-of-Life Milestones and Dates for the Cisco 1841 Integrated Services Router
Milestone |
Definition |
Date |
End-of-Life Announcement Date |
The date the document that announces the end-of-sale and end-of-life of a product is distributed to the general public. |
November 1, 2010 |
End-of-Sale Date |
The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date. |
November 1, 2011 |
Last Ship Date: |
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time. |
January 30, 2012 |
End of SW Maintenance Releases Date: |
The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software. |
October 31, 2014 |
End of Routine Failure Analysis Date: |
The last-possible date a routine failure analysis may be performed to determine the cause of hardware product failure or defect. |
October 31, 2012 |
End of New Service Attachment Date: |
For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract. |
October 31, 2012 |
End of Service Contract Renewal Date: |
The last date to extend or renew a service contract for the product. |
January 30, 2016 |
Last Date of Support: |
The last date to receive applicable service and support for the product as entitled by active service contracts or by warranty terms and conditions. After this date, all support services for the product are unavailable, and the product becomes obsolete. |
October 31, 2016 |
Table 2. Product Part Numbers Affected by This Announcement
End-of-Sale Product Part Number |
Product Description |
Replacement Product Part Number |
Replacement Product Description |
Additional Information |
C1841-3G-G-SEC/K9 |
Cisco1841, HWIC-3G-GSM, 64MB FL /256MB DRAM, Adv Security |
CISCO1941-SEC/K9 |
Cisco 1941 Security Bundle w/SEC license PAK |
- |
C1841-3G-S |
1841 bundle w/HWIC-3G-CDMA-S, IP Base, 64FL/256DR |
CISCO1941/K9 |
Cisco 1941 w/2 GE, 2 EHWIC slots, 256MB CF, 512MB DRAM, IP Base |
- |
C1841-3G-S-SEC/K9 |
Cisco 1841, HWIC-3G-CDMA-S, 64MB FL /256MB DRAM, Adv Securit |
CISCO1941-SEC/K9 |
Cisco 1941 Security Bundle w/SEC license PAK |
- |
C1841-3G-V |
1841 bundle w/HWIC-3G-CDMA-V, IP Base, 64FL/256DR |
CISCO1941/K9 |
Cisco 1941 w/2 GE, 2 EHWIC slots, 256MB CF, 512MB DRAM, IP Base |
- |
C1841-3G-V-SEC/K9 |
Cisco 1841, HWIC-3G-CDMA-V, 64MB FL /256MB DRAM, Adv Securit |
CISCO1941-SEC/K9 |
Cisco 1941 Security Bundle w/SEC license PAK |
- |
C1841-MS-V2 |
1841 T1 W/HWIC-1DSU-T1, w/HWIC-1DSU-T1, IP Base, 64FL/256DR |
There is currently no replacement product available for this product. |
- |
- |
C1841-T1SEC-V2/K9 |
1841 Security Bundle w/ HWIC-1DSU-T1, Adv. Sec., 64FL, 256DR |
There is currently no replacement product available for this product. |
- |
- |
C1841-T1SEC/K9-MS |
1841 security bundle w/T1, 64MB FL/256MB DR |
There is currently no replacement product available for this product. |
- |
- |
C1841SEC-U-HSEC-K9 |
1841 Sec Bundle upgrade, AIM-VPN/BPII-PLUS, Adv. IP Serv. |
CISCO1941-SEC/K9 |
Cisco 1941 Security Bundle w/SEC license PAK |
- |
CISCO1841 |
Modular Router w/2xFE, 2 WAN slots, 64 FL/256 DR |
CISCO1941/K9 |
Cisco 1941 w/2 GE, 2 EHWIC slots, 256MB CF, 512MB DRAM, IP Base |
- |
CISCO1841-1T-EM |
Cisco 1841 EM bundle w/HWIC-1T, IOS IP Base, 64FL/256DR |
CISCO1941/K9 |
Cisco 1941 w/2 GE, 2 EHWIC slots, 256MB CF, 512MB DRAM, IP Base |
- |
CISCO1841-2SHDSL |
1841 2-pair G.SHDSL bundle, HWIC-2SHDSL, IP Base, 64F/256 D |
There is currently no replacement product available for this product. |
- |
- |
CISCO1841-4SHDSL |
1841 4-pair G.SHDSL bundle, HWIC-4SHDSL, IP Base, 64F/256D |
There is currently no replacement product available for this product. |
- |
- |
CISCO1841-ADSL2 |
1841 bundle, HWIC-1ADSL, IP BB, 64F/256D |
There is currently no replacement product available for this product. |
- |
- |
CISCO1841-ADSL2-B |
1841 bundle, HWIC-ADSL-B/ST, IP BB, 64F/256D |
CISCO1941/K9 |
Cisco 1941 w/2 GE, 2 EHWIC slots, 256MB CF, 512MB DRAM, IP Base |
- |
CISCO1841-ADSL2-I |
1841 ADSLoISDN bdle, HWIC-1ADSLI, IP Base, 64F/256D |
CISCO1941/K9 |
Cisco 1941 w/2 GE, 2 EHWIC slots, 256MB CF, 512MB DRAM, IP Base |
- |
CISCO1841-ADSL2-M |
1841 bundle, HWIC-1ADSL-M, IP Base, 64MB CF/256MB DR |
There is currently no replacement product available for this product. |
- |
- |
CISCO1841-HSEC/K9 |
1841 Bundle w/AIM-VPN/SSL-1, Adv. IP Svcs, 10 SSL lic, 64F/256D |
CISCO1941-SEC/K9 |
Cisco 1941 Security Bundle w/SEC license PAK |
- |
CISCO1841-SEC/K9 |
1841 Security Bundle, Adv. Security, 64FL/256DR |
CISCO1941-SEC/K9 |
Cisco 1941 Security Bundle w/SEC license PAK |
- |
CISCO1841-T1-V2 |
1841 bundle w/HWIC-1DSU-T1, IP Base, 32FL/128DR |
There is currently no replacement product available for this product. |
- |
- |
Product Migration Options
Customers are encouraged to migrate to the Cisco 1900 Series Integrated Services Routers Generation 2 (ISR G2), which deliver a new borderless workspace experience through service virtualization, collaboration capabilities, and operational excellence. The ISR G2s offer three to eight times the performance of the current generation. The ISR G2 platforms are architected to enable the next phase of branch-office evolution, providing rich-media collaboration and virtualization to the branch while increasing operational cost savings. Information about the Cisco 1900 ISR can be found at: http://www.cisco.com/en/US/products/ps10538/index.html.
Customers may be able to use the Cisco Technology Migration Program (TMP) where applicable to trade-in eligible products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, customers should work with their Cisco Partner or Cisco account team. Cisco Partners can find additional TMP information on Partner Central at http://www.cisco.com/web/partners/incentives_and_promotions/tmp.html.
Customers may be able to continue to purchase the Cisco 1841 Integrated Services Router through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to: http://www.cisco.com/go/eos.
Service prices for Cisco products are subject to change after the product End-of-Sale date.
The Cisco Takeback and Recycle program helps businesses properly dispose of surplus products that have reached their end of useful life. The program is open to all business users of Cisco equipment and its associated brands and subsidiaries. For more information, go to: http://www.cisco.com/web/about/ac227/ac228/ac231/about_cisco_takeback_recycling.html.
For More Information
For more Information about the Cisco 1921 or 1941 Integrated Services Router, visit http://www.cisco.com/en/US/products/ps10538/index.html, or contact your local account representative.
For more information about the Cisco End-of-Life Policy, go to: http://www.cisco.com/en/US/products/products_end-of-life_policy.html.
For more information about the Cisco Product Warranties, go to: http://www.cisco.com/en/US/products/prod_warranties_listing.html.
To subscribe to receive end-of-life/end-of-sale information, go to: http://www.cisco.com/cisco/support/notifications.html.
Subscribe for RSS Notifications for End-of-Life and End-of-Sale Notices
To subscribe to the End-of-Life and End-of-Sale RSS Feed, insert the following URL into your RSS application: http://www.cisco.com/web/feeds/products/end_of_life_rss.xml.
Any authorized translation issued by Cisco Systems or affiliates of this end-of-life Product Bulletin is intended to help customers understand the content described in the English version. This translation is the result of a commercially reasonable effort; however, if there are discrepancies between the English version and the translated document, please refer to the English version, which is considered authoritative.