Guest

Cisco 12000 Series Routers

EoS and EoL for Cisco 12000 Series SPA Interface Processor-600

  • Viewing Options

  • PDF (106.6 KB)
  • Feedback

EOL5822

Cisco® announces the end-of-sale and end-of life dates for the Cisco 12000 Series SPA Interface Processor-600. The last day to order the affected product(s) is December 13, 2008. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available until the termination date of the contract, even if this date exceeds the Last Date of Support shown in Table 1.

Table 1. End-of-Life Milestones and Dates for the Cisco 12000 Series SPA Interface Processor-600

Milestone

Definition

Date

End-of-Life Announcement Date

The date the document that announces the end of sale and end of life of a product is distributed to the general public.

December 14, 2007

End-of-Sale Date

The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.

December 13, 2008

Last Ship Date:
HW

The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.

March 14, 2009

End of SW Maintenance Releases Date:
OS SW

The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software.

December 13, 2011

End of Routine Failure Analysis Date:
HW

The last-possible date a routine failure analysis may be performed to determine the cause of product failure or defect.

December 13, 2009

End of New Service Attachment Date:
HW

For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.

December 13, 2009

End of Service Contract Renewal Date:
HW

The last date to extend or renew a service contract for the product.

March 13, 2013

Last Date of Support:
HW

The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.

December 12, 2013


HW = Hardware OS SW = Operating System Software App. SW = Application Software

Table 2. Product Part Numbers Affected by This Announcement

End-of-Sale Product Part Number

Product Description

Replacement Product Part Number

Replacement Product Description

12000-SIP-600

10 Gbps IP Services Engine (modular)

12000-SIP-601

Multirate 10G IP Services Engines (Modular)

12000-SIP-600-BUN

12K BN Bundle Config PID

12000-SIP-601-BUN

12K Sashimi Bundle Config PID

12000-SIP-600=

10 Gbps IP Services Engine (modular)

12000-SIP-601=

Multirate 10G IP Services Engine (Modular)

SIP-600-10GE-5PK=

Cisco 12K 10GE 5-Pack

SIP-601-10GE-5PK=

12K Sashimi 5-Pack with 10GE SPAs

SIP-600-GE-5PK=

Cisco 12K GE 5-Pack

SIP-601-GE-5PK=

12K Sashimi 5-Pack with GE SPAs

Product Migration Options

Customers are encouraged to migrate to the Cisco XR 12000 and 12000 Series SPA Interface Processor-601 (part number 12000-SIP-601). Please check Cisco IOS Software version and SIP compatibility for configuration with shared port adapters. Information about these products can be found at: http://www.cisco.com/en/US/products/ps6267/prod_module_series_home.html. The affected products will be supported in software until two years after end of support.
Customers can use the Cisco Technology Migration Plan (TMP) to trade in products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, go to: http://www.cisco.com/go/tradein/. The Cisco TMP application requires all users to have a Cisco.com user ID.
Customers may be able to continue to purchase the end-of-sale product through the Cisco Certified Refurbished Equipment program. Refurbished units of the end-of-sale product are available in limited supply for sale in certain countries on a first-come, first-served basis. For information about the refurbished equipment program, go to: http://cisco.com/go/remarketing

For More Information

For more information about the Cisco XR 12000 and 12000 Series SPA Interface Processor-601, visit: http://www.cisco.com/en/US/products/ps6267/prod_module_series_home.html, or contact your local account representative.
To request information about the Cisco XR 12000 and 12000 Series SPA Interface Processor-601, send an e-mail to: ask-gsr-pm@cisco.com.
For more information about the Cisco End-of-Life Policy, go to:
http://www.cisco.com/en/US/products/prod_end_of_life.html .
To subscribe to receive end-of-life/end-of-sale information, go to:
http://www.cisco.com/cgi-bin/Support/FieldNoticeTool/field-notice.