PDF(97.8 KB) View with Adobe Reader on a variety of devices
Updated:May 13, 2008
Document ID:1518968739995807
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
EOL6434
Cisco® announces the end-of-sale and end-of life dates for the Cisco Media Gateway Control Node Manager 2.6(1) and Voice Services Provisioning Tool 2.6(1). The last day to order the affected product(s) is November 7, 2008. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available until the termination date of the contract, even if this date exceeds the Last Date of Support shown in Table 1.
Table 1. End-of-Life Milestones and Dates for the Cisco Media Gateway Control Node Manager 2.6(1)
Milestone
Definition
Date
End-of-Life Announcement Date
The date the document that announces the end of sale and end of life of a product is distributed to the general public.
May 9, 2008
End-of-Sale Date
The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.
November 7, 2008
Last Ship Date: App. SW
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.
February 5, 2009
End of SW Maintenance Releases Date: App. SW
The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software.
November 7, 2009
End of New Service Attachment Date: App. SW
For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.
November 7, 2009
End of Service Contract Renewal Date: App. SW
The last date to extend or renew a service contract for the product.
February 3, 2011
Last Date of Support: App. SW
The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.
November 7, 2011
HW = Hardware OS SW = Operating System Software App. SW = Application Software
Table 2. Product Part Numbers Affected by This Announcement
End-of-Sale Product Part Number
Product Description
Replacement Product Part Number
Replacement Product Description
EMS-MNM-KIT-261K9
Cisco MNM 2.6(1) media kit crypto aware, incl. EMS, CV
EMS-MNM-KIT-273K9
Cisco MNM 2.7(3) media kit, incl CDs for CEMF,CiscoWorks
EMS-MNM-KIT-261K9=
Cisco MNM 2.6(1) media kit crypto aware, incl. EMS, CV
EMS-MNM-KIT-273K9=
Cisco MNM 2.7(3) media kit, incl CDs for CEMF,CiscoWorks
Cisco MNM 2.7(3) 30day demo, includes all media kit CDs
EMS-MNM-KIT-261K9U
Cisco MNM Media Kit Upgrade, req previous version
EMS-MNM-KIT273K9U
Cisco MNM 2.7(3) media kit upgrade requires previous version
EMS-MNM-LIC-261
Cisco MNM 2.6(1) Right to Use License - sold in 1k DS0 block
EMS-MNM-LIC-273
Cisco MNM 2.7(3) Right to Use License - sold in 1k DS0 block
EMS-MNM-LIC-261-U
Cisco MNM 2.6(1) Right to Use License upgrd - 1k DS0 blocks
EMS-MNM-LIC-273-U
Cisco MNM 2.7(3) Right to Use License upgrade - 1k DS0
EMS-MNM-LIC-261U=
Cisco MNM 2.6(1) Right to Use License upgrade - spare
There is currently no replacement product available for this product.
Product Migration Options
Customers are encouraged to migrate to the Cisco Media Gateway Control Node Manager 2.7(3) when installing Cisco PGW 2200 Softswitch Release 9.7(3). Information about this product can be found at
http://www.cisco.com/en/US/products/sw/netmgtsw/ps1912/index.html.
Customers can use the Cisco Technology Migration Plan (TMP) to trade in products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, go to:
http://www.cisco.com/go/tradein/. The Cisco TMP application requires all users to have a Cisco.com user ID.
Customers may be able to continue to purchase the Cisco Media Gateway Control Node Manager 2.6(1) through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to:
http://www.cisco.com/go/eos.