|
Use this page to update firmware via your file server. After making
firmware updates on this page, the device automatically reboots
to activate the new firmware.
Note The access point only updates the radio firmware if
the radio firmware version to be loaded is newer than the firmware
in the radio.
Settings
Current Firmware Versions
This section shows three current firmware version levels:
- System Firmware
- Web Page
- Radio Firmware
Click the underlined Current Version links to save the
current firmware and Web Pages to a local hard drive or disk.
New Firmware Files
Use this section to browse your hard drive or mapped network drives
to find the desired new files. After you enter filenames for the
firmware to be updated, click Browser Update Now.
- New File for System Firmware
- New File for Web Pages
- New File for Radio Firmware
File Server Setup
This link takes you to the FTP Setup
page.
Action Buttons
|
Command
|
Description
|
|
Update from Server
|
After entering file names for the firmware you want to update,
click Update From Server to load
and install the new firmware. When the update is complete,
the device automatically reboots.
|
|
Save to Server
|
Click this button to save the system firmware and web pages
to your server.
|
|
Done
|
This button sends you back to the Cisco
Services Setup page after updates and saves are complete.
|
|
Cancel
|
This button cancels all changes to the settings, returns
the settings to the previously stored values, and redirects
the user back to the Cisco
Services Setup page.
|
|
