Main Help Topics

This page allows you to set your headings and layout of the Association Table page.

Settings

Stations to Show

Select the station types you want displayed in the Association Table. If you select all station types, all stations of these types appear in the device's Association Table.

Fields to Show

The fields you select here are the column headings for the Association Table. Fields include:

• System Name -- A device's system name.
  
  
• IP Address -- A device's IP address.
  
  
• State -- A device's operational state. Possible states include:
• Assoc -- The station is associated with an access point.
• Unauth -- The station is unauthenticated to any access point.
• Auth -- The station is authenticated to an access point.
  
  
• VLANID -- The VLAN used by the client.
  
  
• SSID -- The client's SSID.
  
  
• Device -- A device's type, such as 350 series access point or a PC client card. Non-Aironet devices appear as Generic 802.11devices.
  
  
• Class -- A device's role in the wireless LAN. Classes include:
  • AP -- An access point station.
  • Client or PS Client -- a client or power-save client station.
  • Bridge, Bridge R -- a bridge or a root bridge.
  • Rptr -- A repeater access point.
  • Mcast -- A multicast address.
  • infra -- An infrastructure node, usually a workstation with a wired connection to the Ethernet network.
    
    
• Parent -- A wireless client device's parent device, which is usually an access point.
  
  
• SW Version -- The current version of firmware on a device.

Packets To/From Station

Use these settings to display packet volume information in the Association Table. Select Total to display the total number of packets to and from each station on the network.

Select Alert to display the number of alert packets to and from each station on the network for which you have activated alert monitoring. Select the Alert check box on a device's Station page to activate alert monitoring for that device.

Bytes To/From Station

Use these settings to display byte volume information in the Association Table. Select Total to display the total number of bytes to and from each station on your wireless network. Select Alert to display the number of alert bytes to and from each station on the wireless network. Both selections add a column to the Association Table.

Primary Sort

This setting determines the information that appears in the first column in the Association Table. Choices available are as follows:

• Device
• IP Address or domain name
• MAC Address
• VLAN
• SSID
• Class
• Parent

Secondary Sort

This setting determines the information that appears in the second column in the Association Table. All primary sort options, except Parent, are available for the secondary sort.

Action Buttons