|
Use the Port Assignments page to assign a specific network port
to a non-root bridge or to a repeater access point. These settings
apply to both the internal radio ports and the radio module ports.
When you assign specific ports, your network topology remains constant.
Settings
ifIndex -- Lists the port's designator
in the Standard MIB-II (RFC1213-MIB.my) interface index.
dot1dBasePort -- Lists the port's designator
in the Bridge MIB (RFC1493;BRIDGE-MIB.my) interface index.
AID -- Lists the port's 802.11 radio
drivers association identifier.
Station -- Enter the MAC address of the
device to which you want to assign the port in the port's Station
entry field. When you click Apply or OK,
the port is reserved for that MAC address.
Action Buttons
|
Command
|
Description
|
|
Apply
|
Activates the new setting. The browser remains on this page.
|
|
OK
|
Applies the new settings and moves the browser back to the
main Setup page.
|
|
Cancel
|
Cancels all changes to the setting, returns the settings
to the previously stored values, and redirects the user back
to the main Setup page.
|
|
Restore Defaults
|
Changes all settings on this page back to the factory default.
|
|
