Cisco Unified CallManager Device Package
7.1.3(33031-1)
Release Notes
These Device Package release
notes contain important information about installation procedures and resolved
caveats for Cisco Unified CallManager Device Package
release 7.1.3(33031-1).
1.
Note: Before you
install this
Determining the Software Version.
Compatibility Matrix and Supported Upgrades
Important Notes & Recommendations
Resolved Caveats for Cisco Unified CallManager Device
Package
This Device Package 7.1.3(33031-1) includes the following
resolved DDTS’s:
Locale Installer for Cisco Unified CallManager
Cisco Product Security Overview
Reporting Security Problems in Cisco Products
Obtaining Technical Assistance
Cisco Technical Support Website
Definitions of Service Request Severity
Obtaining Additional Publications and Information
This document provides installation instructions
for this
2.
Note:
Failure to follow installation instructions as described may result in
inconsistent
Make sure that you
install and configure this release of
You can determine the
version of
This
7.1.3 |
3.
Note: Review the Show/Software on the
4.
NOTE: Be aware that the release of
5. Endpoint firmware: http://www.cisco.com/cgi-bin/tablebuild.pl/ip-7900ser Endpoint documentation, including release notes: http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/english/
Firmware Upgrade Issues
For all SCCP and SIP phone firmware upgrades from versions
earlier than 8.3(3) to version
8.5(2)SR1 or greater, you must first upgrade your
firmware to version 8.5(2). Once you have upgraded
to version 8.5(2), you can upgrade your IP Phone to version 8.5(2)SR1 or later.
For additional details, Firmware Upgrade Instructions, and Firmware Download
locations please see:
http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/firmware/8_5_2/english/release/notes/7900_852SR1.html#wp57602
(SCCP)
http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/firmware/8_5_2/english/release/notes/7900_852SR1.html#wp147343
(SIP)
MD5: 58:8f:57:7a:87:d9:5e:f6:0e:59:8d:18:79:c2:65:52
Cisco
Unified CallManager Device Package 7.1.3(33031-1) includes the following
firmware versions:
Device-type |
Load-name |
Version |
3911_3951-sip |
3911_3951-sip.8-1-2 |
8.1(2.0) |
3911_3951-sip |
3911_3951-sip.8-1-2SR1 |
8.1(2.0) |
6608 |
6608-4.0.0.32-mgcp |
D00404000032.bin/D0054322.bin |
6608cfb |
6608cfb-4.0.0.03-sccp |
C00104000003.bin/C002E031.bin |
6608mtp |
6608mtp-4.0.0.06-sccp |
M00104000006.bin/M002E031.bin |
6624 |
6624-4.0.0.13-mgcp |
A00204000013.bin/A0034322.bin |
6901_6911-QED |
6901_6911-QED-902 |
0.0(0.0) |
6901_6911-sccp |
6901_6911-sccp.9-0-2-0 |
9.0(2.0) |
6921_6941_6961-sccp-qed |
6921_6941_6961-sccp-qed.8-5-4-0 |
8.5(4.0) |
69xx-sccp |
69xx-sccp.8-5-3-0 |
8.5(3.0) |
69xx-sccp |
69xx-sccp.8-5-4-0 |
8.5(4.0) |
69xx-sccp |
69xx-sccp.9-0-2-0 |
9.0(2.0) |
7902 |
7902-8.0.2-sccp |
8.0(2.0) |
7905 |
7905-8.0.1.1-sip |
8.0(1.1) |
7905 |
7905-8.0.3-sccp |
8.0(3.0) |
7910 |
7910-5.0.7.0-sccp |
5.0(7.0) |
7911_7906-sccp |
7911_7906-sccp.9-0-3 |
9.0(3.0) |
7911_7906-sip |
7911_7906-sip.9-0-3 |
9.0(3.0) |
7912 |
7912-8.0.1.1-sip |
8.0(1.1) |
7912 |
7912-8.0.3-sccp |
8.0(3.0) |
7914-sccp |
7914-sccp.5-0-4 |
5.0(4.0) |
7915 |
7915.1-0-4 |
1.0(4.0) |
7916 |
7916.1-0-4 |
1.0(4.0) |
7920-sccp |
7920-sccp.3-0-2 |
3.0(2.0) |
7921-sccp |
7921-sccp.1-3-3 |
1.3(3.0) |
7925-sccp |
7925-sccp.1-3-3 |
1.3(3.0) |
7931-sccp |
7931-sccp.9-0-3 |
9.0(3.0) |
7931-sip |
7931-sip.9-0-3 |
9.0(3.0) |
7935-sccp |
7935-sccp.3-2-19 |
3.2(19.0) |
7936-sccp |
7936-sccp.3-3-20 |
3.3(20.0) |
7937-sccp |
7937-sccp.1-4-1 |
1.4(1.0) |
7940-7960 |
7940-7960-8.12.00-sip |
8.12(0.0) |
7940-7960-sccp |
7940-7960-sccp.8-1-2 |
8.1(2.0) |
7941_7961-sccp |
7941_7961-sccp.9-0-3 |
9.0(3.0) |
7941_7961-sip |
7941_7961-sip.9-0-3 |
9.0(3.0) |
7942_7962-sccp |
7942_7962-sccp.9-0-3 |
9.0(3.0) |
7942_7962-sip |
7942_7962-sip.9-0-3 |
9.0(3.0) |
7945_7965-sccp |
7945_7965-sccp.9-0-3 |
9.0(3.0) |
7945_7965-sip |
7945_7965-sip.9-0-3 |
9.0(3.0) |
7970_7971-sccp |
7970_7971-sccp.9-0-3 |
9.0(3.0) |
7970_7971-sip |
7970_7971-sip.9-0-3 |
9.0(3.0) |
7975-sccp |
7975-sccp.9-0-3 |
9.0(3.0) |
7975-sip |
7975-sip.9-0-3 |
9.0(3.0) |
7985 |
7985-4-1-7-0-sccp |
4.1(7.0) |
8961 |
8961.9-0-3 |
9.0(3.0) |
9951 |
9951.9-0-3 |
9.0(3.0) |
9971 |
9971.9-0-3 |
9.0(3.0) |
ata |
ata-3.2.4-sccp |
3.2(4.0) |
·
To minimize call-processing interruptions during the
upgrade process, make sure that all servers are running the same version of
·
Make sure that the servers are online
before you begin this Device Package installation.
6.
Note:
Procedure
NOTE: Apply this patch to all of your
Cisco Unified CallManager servers, beginning with the
publisher server and TFTP server.
When applying this Device Package to enable new
device support, a cluster-wide reboot is required for those devices to register
successfully. A clusterwide reboot IS NOT
required when running to update existing firmware/support.
For
Cisco Unified CallManager 7.0, you must do all
software installations and upgrades by using the Software Upgrades menu options.
The system can upload and process only software that Cisco Systems approved.
You cannot install or use third-party or Windows-based software applications
that you may have been using with a previous version of Cisco Unified CallManager with Cisco Unified CallManager
7.0.
7.
Note: In order to change the loads manually, you do NOT need to reinstall
this Device Package. The new files will be present in the TFTP folder. Go to CCMAdmin->Device->Device Settings->Device Defaults
and manually change the name of the load file (for specific device(s)) to the
new load and click UPDATE.
Note: If
you are rebooting the cluster, the next step does not need to be done.
8.
The
The Device Package cannot be uninstalled. However, you can change the
device defaults for devices you wish to roll back. From the
Log
File Information
The system creates log files which may be viewed via the
following process:
·
Using Cisco Unified CallManager Serviceability Real-Time Monitoring Tool,
select Trace & Log Central\Remote Browse\Install and Upgrade Logs.
·
Using Cisco Unified CallManager Serviceability Real-Time Monitoring Tool,
select Trace & Log Central\Collect Files\Install and Upgrade Logs.
·
Using Cisco Unified CallManager Serviceability Real-Time Monitoring Tool,
select Trace & Log Central\Query Wizard\Install and Upgrade Logs.
·
Using Cisco Unified CallManager Serviceability Real-Time Monitoring Tool,
select Trace & Log Central\Schedule Collection\Install
and Upgrade Logs.
7.1(3.33031.1) |
|
inconsistency
with cucm and ip phone
for handset/headset monitor param |
|
QED/Locale
files check-in for Turbo Mute Feature |
7.1(3.33030.1) |
|
Adding 9.0(3)
9971/9951/8961 firmware to CUCM |
|
7945 Phone
keep restarting when log in EM |
7.1(3.33029.1) |
|
Add new
devices CTS200 and CTS400 |
|
Add
enhancements for 1100 and 1300 series CTS |
7.1(3.33028.1) |
|
check in of
TNP 902 for dev packs |
7.1(3.33027.1) |
|
7937 release
1.4.1 firmware checkin |
|
2951 SCCP
gateway with EVM module doesn't give MAC Address |
7.1(3.33024.1) |
|
Add videoCapabilities & ciscoCamera
for 9971 and 9951 Phones |
|
7911 SIP
Phone can't login EM and become unusable |
7.1(3.33023.1) |
|
9-0-2 phone
loads for 6901/6911 series phones |
7.1(3.33022.1) |
|
Check-in
9.0(2) firmware for 9971/9951 and 8961 devices |
|
Need to check
in RT-Lite 902 QED and FW into CUCM |
7.1(3.32015.1) |
|
Incorrect softbutton language on phone when used with ASA Phone
Proxy |
7.1(3.32014.1) |
|
Need to check
in the RT-Lite 8-5-4 phone load, QED in cm_7_1_3 |
7.1(3.32010.1) |
|
9.0(1)SR1 devpack has corrupted 9971 cop file |
7.1(3.32009.2) |
|
Without the
Load Server and Log Server parameters for 7931 on CUCM |
7.1(3.21008.1) |
|
Check in the
RT 9.0(1)SR1 phone firmware into CUCM branches |
|
7937 1.4.1
CUCM QED checkin |
|
Phone Button
Templates for 89XX/99XX SIP Phones missing mobility key |
|
Add Support
for Trusted Devices CTS1100 and CTS1300 in 7.1.3 (CIA-1925) |
|
CUCM JPN 7962
Using QRT display of strings has been changed |
7.1(3.21007.1) |
|
Checkin SCCP 8.1(2) 7940/7960 firmware into callmanager |
7.1(3.21006.1) |
|
Enable 9971,
9951, and 8961- QED files |
|
DST-Update CM
to Olson version 2009p |
7.1(3.11001.6) |
|
Device
Defaults don't update after L2 to 7.1.3.11001-4 |
7.1(3.11001.5) |
|
Parameter
"Services Provisioning" is missing for 7931 SIP |
|
7937 134 CUCM
vob check in defect |
|
Add
enhancements for 1100 and 1300 series CTS |
7.1(3.11001.3) |
|
Checking in
phone load 853 firmware |
For optimal performance, be sure
that you use the
Each release of
9.
Note:
When using locales,
You can access the most current
http://www.cisco.com/univercd/home/home.htm
You can access the
You can access international
http://www.cisco.com/public/countries_languages.shtml
For additional
information about
To access the
documentation suite for voice products, navigate to the following URL: http://www.cisco.com/univercd/cc/td/doc/product/voice/.
To access the latest
software upgrades and related documentation for
Registered
http://www.cisco.com/en/US/partner/ordering/
http://www.cisco.com/go/marketplace/
You can find instructions for ordering documentation
at this URL:
http://www.cisco.com/univercd/cc/td/doc/es_inpck/pdi.htm
You can order
You can send comments about technical documentation
to bug-doc@cisco.com.
You can submit comments by using the response card
(if present) behind the front cover of your document or by writing to the
following address:
Attn: Customer Document Ordering
We appreciate your comments.
From this site, you can perform these tasks:
A current list of security advisories and notices
for
If you prefer to see advisories and notices as they
are updated in real time, you can access a Product Security Incident Response
Team Really Simple Syndication (PSIRT RSS) feed from this URL:
http://www.cisco.com/en/US/products/products_psirt_rss_feed.html
We
encourage you to use Pretty Good Privacy (PGP) or a compatible product to
encrypt any sensitive information that you send to
http://pgp.mit.edu:11371/pks/lookup?search=psirt%40cisco.com&op=index&exact=on
In an
emergency, you can also reach PSIRT by telephone:
Obtaining Technical Assistance
For all customers, partners, resellers, and
distributors who hold valid
The
http://www.cisco.com/techsupport
Access to all tools on the
10.
Note: Use the
Using the online TAC Service Request Tool is the fastest
way to open S3 and S4 service requests. (S3 and S4 service requests are those
in which your network is minimally impaired or for which you require product
information.) After you describe your situation, the TAC Service Request Tool
provides recommended solutions. If your issue is not resolved using the
recommended resources, your service request is assigned to a
For S1 or S2 service requests or
if you do not have Internet access, contact the
To open a service request by telephone, use one of
the following numbers:
Asia-Pacific: +61 2 8446 7411
(Australia: 1 800 805 227)
EMEA: +32 2 704 55 55
USA: 1 800 553-2447
For a complete list of
http://www.cisco.com/techsupport/contacts
Definitions of Service Request Severity
To ensure that all service requests are reported in
a standard format,
Severity 1 (S1)—Your
network is “down,” or there is a critical impact to your business
operations. You and
Severity 2 (S2)—Operation of an existing network is
severely degraded, or significant aspects of your business operation are
negatively affected by inadequate performance of
Severity 3 (S3)—Operational performance of
your network is impaired, but most business operations remain functional.
You and
Severity 4 (S4)—You
require information or assistance with
Obtaining Additional Publications and Information
Information about
·
·
· Packet magazine is the
· iQ Magazine is the quarterly
publication from
· Internet Protocol
Journal is a quarterly journal published by
· World-class
networking training is available from
C
All other
trademarks mentioned in this document or Website are
the property of their respective owners. The use of the word partner does not
imply a partnership relationship between
Copyright © 2010 Cisco Systems,
Inc. All rights reserved