Static Address Filtering

Use the Static Address Filtering page to configure the static MAC address filter profiles so that specific MAC addresses will not be assigned to the specified VLANs on the switch. To define a static MAC address filter profile, complete the following steps:

Procedure

Step 1

Click MAC Address Tables > Static Address Filtering.

Step 2

Click Add.

Step 3

Enter the following information:

  • MAC Address—Enter the MAC address.

  • VLAN ID—Select a VLAN ID. The specified MAC address will not be assigned to this VLAN.

Step 4

Click Apply. The static MAC address filter profile is added, and the Running Configuration is updated.