CA Certificate Setting

Users can access information on all installed certificates (dynamic and static). The following information is displayed per each certificate:

Procedure

Step 1

Click Security > Certificate Settings > CA Certificate Settings.

Step 2

To import a new certificate, click Add and complete the following:

  • Certificate Name—Enter the name of the certificate.

  • Certificate Owner —Enter the owner of the certificate.

  • Certificate—Paste the certificate in PEM format (including the begin and end marker lines).

Step 3

Click Apply to apply the new settings.

Step 4

To view the details of an existing certificate, select the certificate from the list and click Details. The following will be displayed:

OptionDescription

Certificate Name

The name or unique identifier of the certificate.

Type

This can be signer, static or dynamic.

Owner

This can be signer, static, CBD or PNP

Version

The version of the certificate.

Serial Number

The serial number of the certificate.

Status

The status of the certificate.

Valid From

The date and time from which certificate is valid,

Valid To

The date and time until which the certificate is valid.

Issuer

The entity or CA that signed the certificate.

Subject

Distinguished name (DN) information for the certificate.

Public Key Type

The type of the public key.

Public Key Length

The length (in bits) of the public key.

Signature Algorithm

The cryptographic algorithm used by the CA to sign the certificate.

Certificate

The certificate details in PEM format.
Step 5

You can use the following filters to find a specific certificate.

  • Type equals to—Check this box and select Signer, Static, or Dynamic from the drop-down list, to filter by these certificate types.

  • Owner equals to—Paste the certificate in PEM format (including the begin and end marker lines).

Step 6

To remove one or more certificates select the certificate(s) and press Delete. Only Static certificates can be deleted.