ACL Binding

Access Control List (ACL) is a list of permissions applied on a port that filters the stream of packets transmitted to the port. A port can be bound with either a policy or an ACL, but not both. To bind an ACL to a port or LAG, follow these steps:

Procedure

Step 1

Click Access Control > ACL Binding.

Step 2

Select an interface type Ports/LAGs (Port or LAG).

Step 3

Click Go. For each type of interface selected, all interfaces of that type are displayed with a list of their current ACLs:

Interface

Identifier of interface on which ACL is defined.

MAC ACL

ACLs of type MAC that are bound to the interface (if any).

IPv4 ACL

ACLs of type IPv4 that are bound to the interface (if any).

IPv6 ACL

ACLs of type IPv6 that are bound to the interface (if any).
Step 4

To unbind all ACLs from an interface, select the interface, and click Clear.

Step 5

Select an interface, and click Edit.

Step 6

Enter the following for both the Input ACL and Output ACL:

MAC-Based ACL

Select a MAC-based ACL to be bound to the interface.

IPv4-Based ACL

Select an IPv4-based ACL to be bound to the interface.

IPv6-Based ACL

Select an IPv6-based ACL to be bound to the interface.
Step 7

Click Apply. The ACL binding is modified, and the Running Configuration file is updated.

Note

If no ACL is selected, the ACL(s) that is previously bound to the interface are unbound.