Contents

• Resetting the Controller to Default Settings
• Information About Resetting the Controller to Default Settings
• Resetting the Controller to Default Settings (GUI)
• Resetting the Controller to Default Settings (CLI)

Resetting the Controller to Default Settings

---

Information About Resetting the Controller to Default Settings

You can return the controller to its original configuration by resetting the controller to factory-default settings.

Resetting the Controller to Default Settings (GUI)

---

Step 1	Start your Internet browser.
Step 2	Enter the controller IP address in the browser address line and press Enter. An Enter Network Password dialog box appears.
Step 3	Enter your username in the User Name text box. The default username is admin.
Step 4	Enter the wireless device password in the Password text box and press Enter. The default password is admin.
Step 5	Choose Commands > Reset to Factory Default.
Step 6	Click Reset.
Step 7	When prompted, confirm the reset.
Step 8	Reboot the controller without saving the configuration.
Step 9	Use the configuration wizard to enter configuration settings. See the Configuring the Controller- Using the Configuration Wizard section section for more information.

---

Resetting the Controller to Default Settings (CLI)

---

Step 1	Enter the reset system command. At the prompt that asks whether you need to save changes to the configuration, enter N. The unit reboots.
Step 2	When you are prompted for a username, enter the recover-config command to restore the factory-default configuration. The controller reboots and displays this message: Welcome to the Cisco WLAN Solution Wizard Configuration Tool
Step 3	Use the configuration wizard to enter configuration settings. See the Configuring the Controller- Using the Configuration Wizard section for more information.

---