Table Of Contents

Sample LAN Configurations

Sample Configuration for Cisco Catalyst 5500 A

Sample Configuration for Cisco Catalyst 5500 A RSM

Sample Configuration for Cisco Catalyst 5500 B

Sample Configuration for Cisco Catalyst 5500 B RSM

Sample LAN Configurations

---

This appendix contains sample configurations for two LAN switches, Cisco Catalyst 5500 A and Cisco Catalyst 5500 B, and the route switch modules.

Sample Configuration for Cisco Catalyst 5500 A

To view the current configuration of the Cisco Catalyst 5500 A, type the following command in privileged mode, and press Enter:

Catalyst_5513A (enable) show config

Output similar to the following appears:

begin

!

#version 4.5(1)

!

set password $1$l30o$QUt/nAlYZH/WFmDoJqWAW0

set enablepass $1$tTCB$rbEX8KRDTtpVG9gsy7jc61

set prompt Catalyst_5513A

set length 24 default

set logout 20

set banner motd ^C^C

!

#system

set system baud  9600

set system modem disable

set system name  Catalyst_5513A

set system location Lab1

set system contact  Jim Smith 913 555-7998

!

#snmp

set snmp community read-only      public

set snmp community read-write     private

set snmp community read-write-all public

set snmp rmon disable

set snmp trap enable  module

set snmp trap enable  chassis

set snmp trap enable  bridge

set snmp trap enable  repeater

set snmp trap enable  vtp

set snmp trap enable  auth

set snmp trap enable  ippermit

set snmp trap enable  vmps

set snmp trap enable  entity

set snmp trap enable  config

set snmp trap enable  stpx

set snmp trap enable  syslog

set snmp extendedrmon vlanmode disable

set snmp extendedrmon vlanagent disable

set snmp extendedrmon enable

!

#ip

set interface sc0 3 172.25.66.122 255.255.255.192 172.25.66.127

set interface sc0 up

set interface sl0 0.0.0.0 0.0.0.0

set interface sl0 up

set arp agingtime 1200

set ip redirect   enable

set ip unreachable   enable

set ip fragmentation enable

set ip route 0.0.0.0         172.25.66.124 1

set ip alias default         0.0.0.0

!

#Command alias

!

#vmps

set vmps server retry 3

set vmps server reconfirminterval 60

set vmps tftpserver 0.0.0.0 vmps-config-database.1

set vmps state disable

!

#dns

set ip dns disable

!

#tacacs+

set tacacs attempts 3

set tacacs directedrequest disable

set tacacs timeout 5

!

#authentication

set authentication login tacacs disable console

set authentication login tacacs disable telnet

set authentication enable tacacs disable console

set authentication enable tacacs disable telnet

set authentication login local enable console

set authentication login local enable telnet

set authentication enable local enable console

set authentication enable local enable telnet

!

#bridge

set bridge ipx snaptoether   8023raw

set bridge ipx 8022toether   8023

set bridge ipx 8023rawtofddi snap

!

#vtp

set vtp domain vsc3000

set vtp mode transparent

set vtp v2 disable

set vtp pruneeligible 2-1000

clear vtp pruneeligible 1001-1005

set vlan 1 name default type ethernet mtu 1500 said 100001 state active

set vlan 2 name green type ethernet mtu 1500 said 100002 state active

set vlan 3 name blue type ethernet mtu 1500 said 100003 state active

set vlan 4 name red type ethernet mtu 1500 said 100004 state active

set vlan 1002 name fddi-default type fddi mtu 1500 said 101002 state active

set vlan 1004 name fddinet-default type fddinet mtu 1500 said 101004 state activ

e bridge 0x0 stp ieee

set vlan 1005 name trnet-default type trbrf mtu 1500 said 101005 state active br

idge 0x0 stp ibm

set vlan 1003 name token-ring-default type trcrf mtu 1500 said 101003 state acti

ve parent 0 ring 0x0 mode srb aremaxhop 7 stemaxhop 7

set interface sc0 3 172.25.66.122 255.255.255.192 172.25.66.127

!

#spantree

#uplinkfast groups

set spantree uplinkfast enable rate 15 all-protocols off

#backbonefast

set spantree backbonefast disable

set spantree enable  all

#vlan 1

set spantree fwddelay 4     1

set spantree hello    1     1

set spantree maxage   20    1

set spantree priority 1000 1

#vlan 2

set spantree fwddelay 4     2

set spantree hello    1     2

set spantree maxage   20    2

set spantree priority 1000 2

#vlan 3

set spantree fwddelay 4     3

set spantree hello    1     3

set spantree maxage   20    3

set spantree priority 1000 3

#vlan 4

set spantree fwddelay 4     4

set spantree hello    1     4

set spantree maxage   20    4

set spantree priority 1000 4

#vlan 1003

set spantree fwddelay 15    1003

set spantree hello    2     1003

set spantree maxage   20    1003

set spantree priority 49152 1003

set spantree portstate 1003 block 0

set spantree portcost 1003 62

set spantree portpri  1003 4

set spantree portfast 1003 disable

#vlan 1005

set spantree fwddelay 15    1005

set spantree hello    2     1005

set spantree maxage   20    1005

set spantree priority 49152 1005

set spantree multicast-address 1005 ieee

!

#cgmp

set cgmp disable

set cgmp leave disable

!

#syslog

set logging console enable

set logging server disable

set logging level cdp 2 default

set logging level mcast 2 default

set logging level dtp 5 default

set logging level dvlan 2 default

set logging level earl 2 default

set logging level fddi 2 default

set logging level ip 2 default

set logging level pruning 2 default

set logging level snmp 2 default

set logging level spantree 2 default

set logging level sys 5 default

set logging level tac 2 default

set logging level tcp 2 default

set logging level telnet 2 default

set logging level tftp 2 default

set logging level vtp 2 default

set logging level vmps 2 default

set logging level kernel 2 default

set logging level filesys 2 default

set logging level drip 2 default

set logging level pagp 5 default

set logging level mgmt 5 default

set logging level mls 5 default

set logging level protfilt 2 default

set logging level security 2 default

set logging server facility LOCAL7

set logging server severity 4

set logging buffer 500

set logging timestamp disable

!

#ntp

set ntp broadcastclient disable

set ntp broadcastdelay 3000

set ntp client disable

clear timezone

set summertime disable

!

#set boot command

set boot config-register 0x2

set boot system flash bootflash:RTSYNC_cat5000-sup3_4-5-1.bin

set boot system flash bootflash:RTSYNC_cat5000-sup3.4-4-1.bin

set boot system flash bootflash:cat5000-sup3.4-3-1a.bin

!

#permit list

set ip permit disable

!

#drip

set tokenring reduction enable

set tokenring distrib-crf disable

!

#igmp

set igmp disable

!

#protocolfilter

set protocolfilter disable

!

#mls

set mls enable

set mls flow destination

set mls agingtime 256

set mls agingtime fast 0 0

set mls nde disable

!

#standby ports

set standbyports enable

!

#module 1 : 2-port 10/100BaseTX Supervisor

set module name    1

set vlan 1    1/1-2

set port channel 1/1-2 off

set port enable     1/1-2

set port level      1/1-2  normal

set port speed      1/1-2  100

set port duplex     1/1-2  full

set port trap       1/1-2  disable

set port name       1/1-2

set port security   1/1-2  disable

set port broadcast  1/1-2  100%

set port membership 1/1-2  static

set port protocol 1/1-2 ip on

set port protocol 1/1-2 ipx auto

set cdp enable   1/1-2

set cdp interval 1/1-2 60

set trunk 1/1  on isl 1-1005

set trunk 1/2  on isl 1-1005

set spantree portfast    1/1-2 disable

set spantree portcost    1/1-2  3019

set spantree portpri     1/1-2  32

set spantree portvlanpri 1/1  0

set spantree portvlanpri 1/2  0

set spantree portvlancost 1/1  cost 3018

set spantree portvlancost 1/2  cost 3018

!

#module 2 : 2-port 10/100BaseTX Supervisor

set module name    2

set vlan 1    2/1-2

set port channel 2/1-2 off

set port enable     2/1-2

set port level      2/1-2  normal

set port speed      2/1-2  100

set port duplex     2/1-2  full

set port trap       2/1-2  disable

set port name       2/1-2

set port security   2/1-2  disable

set port broadcast  2/1-2  100%

set port membership 2/1-2  static

set port protocol 2/1-2 ip on

set port protocol 2/1-2 ipx auto

set cdp enable   2/1-2

set cdp interval 2/1-2 60

set trunk 2/1  desirable isl 1-1005

set trunk 2/2  desirable isl 1-1005

set spantree portfast    2/1-2 disable

set spantree portcost    2/1-2  3019

set spantree portpri     2/1-2  32

set spantree portvlanpri 2/1  0

set spantree portvlanpri 2/2  0

set spantree portvlancost 2/1  cost 3018

set spantree portvlancost 2/2  cost 3018

!

#module 3 : 24-port 10BaseT Ethernet

set module name    3

set module enable  3

set vlan 1    3/19-20,3/22-24

set vlan 2    3/1-18

set vlan 3    3/21

set port enable     3/1-24

set port level      3/1-24  normal

set port duplex     3/1-24  half

set port trap       3/1-24  disable

set port name       3/1-24

set port security   3/1-24  disable

set port broadcast  3/1-24  0

set port membership 3/1-24  static

set port protocol 3/1-24 ip on

set port protocol 3/1-24 ipx auto

set cdp enable   3/1-24

set cdp interval 3/1-24 60

set spantree portfast    3/1-24 enable

set spantree portcost    3/1-24  3100

set spantree portpri     3/1-24  32

!

#module 4 : 12-port 10/100BaseTX Ethernet

set module name    4

set module enable  4

set vlan 2    4/1-2

set vlan 3    4/7-8

set vlan 4    4/3-6

set port channel 4/1-4 off

set port channel 4/5-8 off

set port channel 4/9-12 off

set port enable     4/1-12

set port level      4/1-12  normal

set port speed      4/1-12 auto

set port trap       4/1-12  disable

set port name       4/1-12

set port security   4/1-12  disable

set port broadcast  4/1-12  0

set port membership 4/1-12  static

set port protocol 4/1-12 ip on

set port protocol 4/1-12 ipx auto

set cdp enable   4/1-12

set cdp interval 4/1-12 60

set trunk 4/1  auto isl 1-1005

set trunk 4/2  auto isl 1-1005

set trunk 4/3  auto isl 1-1005

set trunk 4/4  auto isl 1-1005

set trunk 4/5  auto isl 1-1005

set trunk 4/6  auto isl 1-1005

set trunk 4/7  auto isl 1-1005

set trunk 4/8  auto isl 1-1005

set trunk 4/9  auto isl 1-1005

set trunk 4/10 auto isl 1-1005

set trunk 4/11 off isl 1-1005

set trunk 4/12 off isl 1-1005

set spantree portfast    4/1-12 enable

set spantree portcost    4/5-8, 4/11-12 3019

set spantree portcost    4/1-4, 4/9-10 3100

set spantree portpri     4/1-12  32

set spantree portvlanpri 4/1  0

set spantree portvlanpri 4/2  0

set spantree portvlanpri 4/3  0

set spantree portvlanpri 4/4  0

set spantree portvlanpri 4/5  0

set spantree portvlanpri 4/6  0

set spantree portvlanpri 4/7  0

set spantree portvlanpri 4/8  0

set spantree portvlanpri 4/9  0

set spantree portvlanpri 4/10 0

set spantree portvlanpri 4/11 0

set spantree portvlanpri 4/12 0

set spantree portvlancost 4/1  cost 3099

set spantree portvlancost 4/2  cost 3099

set spantree portvlancost 4/3  cost 3099

set spantree portvlancost 4/4  cost 3099

set spantree portvlancost 4/5  cost 3018

set spantree portvlancost 4/6  cost 3018

set spantree portvlancost 4/7  cost 3018

set spantree portvlancost 4/8  cost 3018

set spantree portvlancost 4/9  cost 3099

set spantree portvlancost 4/10 cost 3099

set spantree portvlancost 4/11 cost 3018

set spantree portvlancost 4/12 cost 3018

!

#module 5 empty

!

#module 6 empty

!

#module 7 empty

!

#module 8 empty

!

#module 9 empty

!

#module 10 empty

!

#module 11 empty

!

#module 12 : 1-port Route Switch

set module name    12

set port level      12/1  normal

set port trap       12/1  disable

set port name       12/1

set cdp enable   12/1

set cdp interval 12/1 60

set trunk 12/1  on isl 1-1005

set spantree portcost    12/1  3005

set spantree portpri     12/1  15

set spantree portvlanpri 12/1  160

set spantree portvlancost 12/1  cost 3004 4-8,11-15

!

#module 13 empty

!

#switch port analyzer

set span 2 3/23 both inpkts disable

!set span enable

!

#cam

set cam agingtime 1-4,1003,1005 300

end

Sample Configuration for Cisco Catalyst 5500 A RSM

To view the current configuration of the Cisco Catalyst 5500 A RSM, access the RSM interface, type the following command in privileged mode, and press Enter:

Catalyst_5513A_RSM#show run

Output similar to the following appears:

Building configuration...

Current configuration:

!

version 11.3

service timestamps debug uptime

service timestamps log uptime

no service password-encryption

!

hostname Catalyst_5513A_RSM

!

enable password cisco

!

no ip domain-lookup

!

!

!

interface Vlan2

 ip address 209.165.200.224 255.255.255.224

 no ip redirects

 standby 2 timers 1 3

 standby 2 priority 110

 standby 2 preempt

 standby 2 authentication VSC3000

 standby 2 ip 172.25.66.60

!

interface Vlan3

 ip address 209.165.200.224 255.255.255.224

 no ip redirects

 standby 3 timers 1 3

 standby 3 priority 110

 standby 3 preempt

 standby 3 authentication VSC3000

 standby 3 ip 209.165.200.224 

!

interface Vlan4

 ip address 209.165.200.224 255.255.255.224

 no ip redirects

 standby 4 timers 1 3

 standby 4 priority 110

 standby 4 preempt

 standby 4 authentication VSC3000

 standby 4 ip 209.165.200.224 

!

router eigrp 1

 network 209.165.200.224 

!

ip classless

!

snmp-server community public RO

snmp-server community private RW

snmp-server chassis-id public

snmp-server enable traps snmp

snmp-server enable traps appn alert

snmp-server enable traps config

snmp-server enable traps entity

snmp-server enable traps rtr

!

line con 0

line aux 0

line vty 0 4

 password cisco

 login

!

end

Sample Configuration for Cisco Catalyst 5500 B

To view the current configuration of the Cisco Catalyst 5500 B, type the following command in privileged mode, and press Enter:

Catalyst_5513B (enable) show config

Output similar to the following appears:

begin

!

#version 4.5(1)

!

set password $1$7OtT$J/rAZe2CANYvHW72ZMtI10

set enablepass $1$0o8Z$xbxAzs4LlepsklB6Ju7VY.

set prompt Catalyst_5513B

set length 24 default

set logout 20

set banner motd ^C^C

!

#system

set system baud  9600

set system modem disable

set system name  Catalyst_5513B

set system location Lab1

set system contact  John Smith 913 555-7998

!

#snmp

set snmp community read-only      public

set snmp community read-write     private

set snmp community read-write-all public

set snmp rmon disable

set snmp trap disable module

set snmp trap disable chassis

set snmp trap disable bridge

set snmp trap disable repeater

set snmp trap disable vtp

set snmp trap disable auth

set snmp trap disable ippermit

set snmp trap disable vmps

set snmp trap disable entity

set snmp trap disable config

set snmp trap disable stpx

set snmp trap disable syslog

set snmp extendedrmon vlanmode disable

set snmp extendedrmon vlanagent disable

set snmp extendedrmon enable

!

#ip

set interface sc0 3 209.165.200.224 255.255.255.224

set interface sc0 up

set interface sl0 0.0.0.0 0.0.0.0

set interface sl0 up

set arp agingtime 1200

set ip redirect   enable

set ip unreachable   enable

set ip fragmentation enable

set ip route 0.0.0.0 209.165.200.224

set ip alias default         0.0.0.0

!

#Command alias

!

#vmps

set vmps server retry 3

set vmps server reconfirminterval 60

set vmps tftpserver 0.0.0.0 vmps-config-database.1

set vmps state disable

!

#dns

set ip dns disable

!

#tacacs+

set tacacs attempts 3

set tacacs directedrequest disable

set tacacs timeout 5

!

#authentication

set authentication login tacacs disable console

set authentication login tacacs disable telnet

set authentication enable tacacs disable console

set authentication enable tacacs disable telnet

set authentication login local enable console

set authentication login local enable telnet

set authentication enable local enable console

set authentication enable local enable telnet

!

#bridge

set bridge ipx snaptoether   8023raw

set bridge ipx 8022toether   8023

set bridge ipx 8023rawtofddi snap

!

#vtp

set vtp domain vsc3000

set vtp mode transparent

set vtp v2 disable

set vtp pruneeligible 2-1000

clear vtp pruneeligible 1001-1005

set vlan 1 name default type ethernet mtu 1500 said 100001 state active

set vlan 2 name green type ethernet mtu 1500 said 100002 state active

set vlan 3 name blue type ethernet mtu 1500 said 100003 state active

set vlan 4 name red type ethernet mtu 1500 said 100004 state active

set vlan 1002 name fddi-default type fddi mtu 1500 said 101002 state active

set vlan 1004 name fddinet-default type fddinet mtu 1500 said 101004 state active bridge 
0x0 stp ieee

set vlan 1005 name trnet-default type trbrf mtu 1500 said 101005 state active bridge 0x0 
stp ibm

set vlan 1003 name token-ring-default type trcrf mtu 1500 said 101003 state active parent 
0 ring 0x0 mode srb aremaxhop 7 stemaxhop 7

set interface sc0 3 209.165.200.224 255.255.255.224 209.165.200.224

!

#spantree

#uplinkfast groups

set spantree uplinkfast disable

#backbonefast

set spantree backbonefast disable

set spantree enable  all

#vlan 1

set spantree fwddelay 4 1

set spantree hello    2     1

set spantree maxage   20    1

set spantree priority 2000 1

#vlan 2

set spantree fwddelay 4 2

set spantree hello    2     2

set spantree maxage   20    2

set spantree priority 2000 2

#vlan 3

set spantree fwddelay 4 3

set spantree hello    2     3

set spantree maxage   20    3

set spantree priority 2000 3

#vlan 4

set spantree fwddelay 4 4

set spantree hello    2     4

set spantree maxage   20    4

set spantree priority 2000 4

#vlan 1003

set spantree fwddelay 15    1003

set spantree hello    2     1003

set spantree maxage   20    1003

set spantree priority 32768 1003

set spantree portstate 1003 block 0

set spantree portcost 1003 62

set spantree portpri  1003 4

set spantree portfast 1003 disable

#vlan 1005

set spantree fwddelay 15    1005

set spantree hello    2     1005

set spantree maxage   20    1005

set spantree priority 32768 1005

set spantree multicast-address 1005 ieee

!

#cgmp

set cgmp disable

set cgmp leave disable

!

#syslog

set logging console enable

set logging server disable

set logging level cdp 2 default

set logging level mcast 2 default

set logging level dtp 5 default

set logging level dvlan 2 default

set logging level earl 2 default

set logging level fddi 2 default

set logging level ip 2 default

set logging level pruning 2 default

set logging level snmp 2 default

set logging level spantree 2 default

set logging level sys 5 default

set logging level tac 2 default

set logging level tcp 2 default

set logging level telnet 2 default

set logging level tftp 2 default

set logging level vtp 2 default

set logging level vmps 2 default

set logging level kernel 2 default

set logging level filesys 2 default

set logging level drip 2 default

set logging level pagp 5 default

set logging level mgmt 5 default

set logging level mls 5 default

set logging level protfilt 2 default

set logging level security 2 default

set logging server facility LOCAL7

set logging server severity 4

set logging buffer 500

set logging timestamp disable

!

#ntp

set ntp broadcastclient disable

set ntp broadcastdelay 3000

set ntp client disable

clear timezone

set summertime disable

!

#set boot command

set boot config-register 0x2

set boot system flash bootflash:cat5000-sup3.4-5-1.bin

!

#permit list

set ip permit disable

!

#drip

set tokenring reduction enable

set tokenring distrib-crf disable

!

#igmp

set igmp disable

!

#protocolfilter

set protocolfilter disable

!

#mls

set mls enable

set mls flow destination

set mls agingtime 256

set mls agingtime fast 0 0

set mls nde disable

!

#standby ports

set standbyports enable

!

#module 1 : 2-port 10/100BaseTX Supervisor

set module name    1

set vlan 1    1/1-2

set port channel 1/1-2 off

set port enable     1/1-2

set port level      1/1-2  normal

set port speed      1/1-2  100

set port duplex     1/1-2  full

set port trap       1/1-2  disable

set port name       1/1-2

set port security   1/1-2  disable

set port broadcast  1/1-2  100%

set port membership 1/1-2  static

set port protocol 1/1-2 ip on

set port protocol 1/1-2 ipx auto

set cdp enable   1/1-2

set cdp interval 1/1-2 60

set trunk 1/1  on isl 1-1005

set trunk 1/2  on isl 1-1005

set spantree portfast    1/1-2 disable

set spantree portcost    1/1-2  3019

set spantree portpri     1/1-2  32

set spantree portvlanpri 1/1  0

set spantree portvlanpri 1/2  0

set spantree portvlancost 1/1  cost 3018

set spantree portvlancost 1/2  cost 3018

!

#module 2 : 2-port 10/100BaseTX Supervisor

set module name    2

set vlan 1    2/1-2

set port channel 2/1-2 off

set port enable     2/1-2

set port level      2/1-2  normal

set port speed      2/1-2  100

set port duplex     2/1-2  full

set port trap       2/1-2  disable

set port name       2/1-2

set port security   2/1-2  disable

set port broadcast  2/1-2  100%

set port membership 2/1-2  static

set port protocol 2/1-2 ip on

set port protocol 2/1-2 ipx auto

set cdp enable   2/1-2

set cdp interval 2/1-2 60

set trunk 2/1  desirable isl 1-1005

set trunk 2/2  desirable isl 1-1005

set spantree portfast    2/1-2 disable

set spantree portcost    2/1-2  3019

set spantree portpri     2/1-2  32

set spantree portvlanpri 2/1  0

set spantree portvlanpri 2/2  0

set spantree portvlancost 2/1  cost 3018

set spantree portvlancost 2/2  cost 3018

!

#module 3 : 24-port 10BaseT Ethernet

set module name    3

set module enable  3

set vlan 1    3/20-24

set vlan 2    3/17

set vlan 3    3/1-16,3/19

set port enable     3/1-24

set port level      3/1-24  normal

set port duplex     3/1-24  half

set port trap       3/1-24  disable

set port name       3/1-24

set port security   3/1-24  disable

set port broadcast  3/1-24  0

set port membership 3/1-24  static

set port protocol 3/1-24 ip on

set port protocol 3/1-24 ipx auto

set cdp enable   3/1-24

set cdp interval 3/1-24 60

set spantree portfast    3/1-24 enable

set spantree portcost    3/1-24  3100

set spantree portpri     3/1-24  32

!

#module 4 : 12-port 10/100BaseTX Ethernet

set module name    4

set module enable  4

set vlan 2    4/1-2

set vlan 3    4/7-8

set vlan 4    4/3-6

set port channel 4/1-4 off

set port channel 4/5-8 off

set port channel 4/9-12 off

set port enable     4/1-12

set port level      4/1-12  normal

set port speed      4/1-10  auto

set port speed      4/11-12  100

set port duplex     4/11-12  full

set port trap       4/1-12  disable

set port name       4/1-12

set port security   4/1-12  disable

set port broadcast  4/1-12  0

set port membership 4/1-12  static

set port protocol 4/1-12 ip on

set port protocol 4/1-12 ipx auto

set cdp enable   4/1-12

set cdp interval 4/1-12 60

set trunk 4/1  auto isl 1-1005

set trunk 4/2  auto isl 1-1005

set trunk 4/3  auto isl 1-1005

set trunk 4/4  auto isl 1-1005

set trunk 4/5  auto isl 1-1005

set trunk 4/6  auto isl 1-1005

set trunk 4/7  auto isl 1-1005

set trunk 4/8  auto isl 1-1005

set trunk 4/9  auto isl 1-1005

set trunk 4/10 auto isl 1-1005

set trunk 4/11 desirable isl 1-1005

set trunk 4/12 desirable isl 1-1005

set spantree portfast    4/1-12 enable

set spantree portcost    4/1,4/6-7,4/11-12 3019

set spantree portcost    4/2-5,4/8-10 3100

set spantree portpri     4/1-12  32

set spantree portvlanpri 4/1  0

set spantree portvlanpri 4/2  0

set spantree portvlanpri 4/3  0

set spantree portvlanpri 4/4  0

set spantree portvlanpri 4/5  0

set spantree portvlanpri 4/6  0

set spantree portvlanpri 4/7  0

set spantree portvlanpri 4/8  0

set spantree portvlanpri 4/9  0

set spantree portvlanpri 4/10 0

set spantree portvlanpri 4/11 0

set spantree portvlanpri 4/12 0

set spantree portvlancost 4/1  cost 3018

set spantree portvlancost 4/2  cost 3099

set spantree portvlancost 4/3  cost 3099

set spantree portvlancost 4/4  cost 3099

set spantree portvlancost 4/5  cost 3099

set spantree portvlancost 4/6  cost 3018

set spantree portvlancost 4/7  cost 3018

set spantree portvlancost 4/8  cost 3099

set spantree portvlancost 4/9  cost 3099

set spantree portvlancost 4/10 cost 3099

set spantree portvlancost 4/11 cost 3018

set spantree portvlancost 4/12 cost 3018

!

#module 5 empty

!

#module 6 empty

!

#module 7 empty

!

#module 8 empty

!

#module 9 empty

!

#module 10 empty

!

#module 11 empty

!

#module 12 : 1-port Route Switch

set module name    12

set port level      12/1  normal

set port trap       12/1  disable

set port name       12/1

set cdp enable   12/1

set cdp interval 12/1 60

set trunk 12/1  on isl 1-1005

set spantree portcost    12/1  3005

set spantree portpri     12/1  15

set spantree portvlanpri 12/1  160

set spantree portvlancost 12/1  cost 3004 4-8,11-15

!

#module 13 empty

!

#switch port analyzer

!set span 1 1/1 both inpkts disable

set span disable

!

#cam

set cam agingtime 1-4,1003,1005 300

end

Sample Configuration for Cisco Catalyst 5500 B RSM

To view the current configuration of the Cisco Catalyst 5500 B RSM, access the RSM interface, type the following command in privileged mode, and press Enter:

Catalyst_5513B_RSM#show run

Output similar to the following appears:

Building configuration...

Current configuration:

!

version 11.3

service timestamps debug uptime

service timestamps log uptime

no service password-encryption

!

hostname Catalyst_5513B_RSM

!

enable password cisco

!

no ip domain-lookup

!

!

!

interface Vlan2

 ip address 209.165.200.224 255.255.255.224

 no ip redirects

 standby 2 timers 1 3

 standby 2  preempt

 standby 2 authentication VSC3000

 standby 2 ip 172.25.66.60

!

interface Vlan3

 ip address 209.165.200.224 255.255.255.224

 no ip redirects

 standby 3 timers 1 3

 standby 3  preempt

 standby 3 authentication vsc3000

 standby 3 ip 209.165.200.224

!

interface Vlan4

 ip address 209.165.200.224 255.255.255.224

 no ip redirects

 standby 4 timers 1 3

 standby 4  preempt

 standby 4 authentication VSC3000

 standby 4 ip 209.165.200.224

!

router eigrp 1

 network 209.165.200.224

!

ip classless

!

snmp-server community public RO

snmp-server community private RW

snmp-server chassis-id public

snmp-server enable traps snmp

snmp-server enable traps appn alert

snmp-server enable traps config

snmp-server enable traps entity

snmp-server enable traps rtr

!

line con 0

line aux 0

line vty 0 4

 password cisco

 login

!

end