Cisco CallManager Administration Guide, Release 4.0(1)
Meet-Me Number/Pattern Configuration

Table Of Contents

Meet-Me Number/Pattern Configuration

Finding a Meet-Me Number/Pattern

Copying a Meet-Me Number/Pattern

Adding a Meet-Me Number/Pattern

Updating a Meet-Me Number/Pattern

Deleting a Meet-Me Number/Pattern

Meet-Me Number/Pattern Configuration Settings


Meet-Me Number/Pattern Configuration


Meet-Me conferences require an allocation of directory numbers. Cisco CallManager Administration provides the Meet-Me conference directory number range to users, so they can access the feature.

This section describes the following procedures:

Finding a Meet-Me Number/Pattern

Copying a Meet-Me Number/Pattern

Adding a Meet-Me Number/Pattern

Updating a Meet-Me Number/Pattern

Deleting a Meet-Me Number/Pattern

Meet-Me Number/Pattern Configuration Settings

Finding a Meet-Me Number/Pattern

Because you might have several meet-me numbers/patterns in your network, Cisco CallManager lets you locate specific meet-me numbers/patterns on the basis of specific criteria. Use the following procedure to locate meet-me numbers/patterns.


Note During your work in a browser session, Cisco CallManager Administration retains your meet-me number/pattern search preferences. If you navigate to other menu items and return to this menu item, Cisco CallManager Administration retains your meet-me number/pattern search preferences until you modify your search or close the browser.


Procedure


Step 1 Choose Feature > Meet-Me Number/Pattern.

The Find and List Meet-Me Numbers window displays. Use the two drop-down list boxes to search for a meet-me number/pattern.

Step 2 From the first Find Number/Pattern where drop-down list box, choose one of the following criteria:

Number

Partition

Description


Note The criterion that you choose in this drop-down list box specifies how the list of meet-me numbers/patterns that your search generates will be sorted. For example, if you choose Partition, the Partition column will display as the left column of the results list.


From the second Find Number/Pattern where drop-down list box, choose one of the following criteria:

begins with

contains

ends with

is exactly

Step 3 Specify the appropriate search text, if applicable, and click Find. You can also specify how many items per page to display.


Tip To find all meet-me numbers/patterns that are registered in the database, click Find without entering any search text.


A list of discovered meet-me numbers/patterns displays by

Meet-Me Number/Pattern icon

Meet-Me Number/Pattern

Partition

Description


Note You can delete multiple meet-me numbers/patterns from the Find and List Meet-Me Numbers window by checking the check boxes next to the appropriate meet-me numbers/patterns and clicking Delete Selected. You can delete all meet-me numbers/patterns in the window by checking the check box in the Matching records title bar and clicking Delete Selected.


Step 4 From the list of records, click the Meet-Me Number/Pattern icon, number, associated partition, or description that matches your search criteria.

The window displays the meet-me number/pattern that you choose.


Related Topics

Adding a Meet-Me Number/Pattern

Updating a Meet-Me Number/Pattern

Deleting a Meet-Me Number/Pattern

Meet-Me Number/Pattern Configuration Settings

Copying a Meet-Me Number/Pattern

This section describes how to copy a Meet-Me Number/Pattern.

Before You Begin

Make sure that the following prerequisites are met before proceeding with the steps:

Configure the servers. See the "Server Configuration" section.

Configure the device pools. See the "Device Pool Configuration" section.

Procedure


Step 1 Choose Feature > Meet-Me Number/Pattern.

Step 2 Find the Meet-Me Number/Pattern that you want to copy by using the procedure in the "Finding a Meet-Me Number/Pattern" section.

Step 3 Click the Meet-Me Number/Pattern that you want to copy.

The Meet-Me Number/Pattern Configuration window displays.

Step 4 Click Copy.

Step 5 Enter the appropriate settings as described in Table 37-1.

Step 6 To save the new meet-me number/pattern in the database, click Insert.


Related Topics

Finding a Meet-Me Number/Pattern

Updating a Meet-Me Number/Pattern

Deleting a Meet-Me Number/Pattern

Adding a Software Conference Device

Adding a Hardware Conference Device

Adding a Cisco IOS Conference Bridge Device

Updating a Conference Device

Deleting a Conference Device

Updating Conference Bridge Parameters

Partition Configuration

Conference Bridges, Cisco CallManager System Guide

Adding a Meet-Me Number/Pattern

This section describes how to add a Meet-Me Number/Pattern.

Before You Begin

Make sure that the following prerequisites are met before proceeding with the steps:

Configure the servers. See the "Server Configuration" section.

Configure the device pools. See the "Device Pool Configuration" section.

Procedure


Step 1 Choose Feature > Meet-Me Number/Pattern.

Step 2 In the upper, right corner of the window, click the Add a New Meet-Me Number link.

The Meet-Me Number/Pattern Configuration window displays.

Step 3 Enter the appropriate settings as described in Table 37-1.

Step 4 To save the new meet-me number/pattern in the database, click Insert.


Related Topics

Finding a Meet-Me Number/Pattern

Updating a Meet-Me Number/Pattern

Deleting a Meet-Me Number/Pattern

Adding a Software Conference Device

Adding a Hardware Conference Device

Adding a Cisco IOS Conference Bridge Device

Updating a Conference Device

Deleting a Conference Device

Updating Conference Bridge Parameters

Partition Configuration

Conference Bridges, Cisco CallManager System Guide

Updating a Meet-Me Number/Pattern

This section describes how to update a Meet-Me Number/Pattern.

Before You Begin

Make sure that the following prerequisites are met before proceeding with the steps:

Configure the servers. See the "Server Configuration" section.

Configure the device pools. See the "Device Pool Configuration" section.

Configure the meet-me number/pattern. See the "Adding a Meet-Me Number/Pattern" section.

Procedure


Step 1 Find the meet-me number/pattern by using the procedure in the "Finding a Meet-Me Number/Pattern" section.

Step 2 Click the Meet-Me Number/Pattern that you want to update.

Step 3 Update the appropriate settings as described in Table 37-1.


Note You can change the number or pattern as needed (example, changing 5000 to 500X).


Step 4 To save the changes in the database, click Update.


Related Topics

Adding a Software Conference Device

Adding a Hardware Conference Device

Adding a Cisco IOS Conference Bridge Device

Updating a Conference Device

Deleting a Conference Device

Updating Conference Bridge Parameters

Finding a Meet-Me Number/Pattern

Adding a Meet-Me Number/Pattern

Deleting a Meet-Me Number/Pattern

Partition Configuration

Conference Bridges, Cisco CallManager System Guide

Deleting a Meet-Me Number/Pattern

This section describes how to delete a Meet-Me Number/Pattern.

Before You Begin

Make sure that the following prerequisites are met before proceeding with the steps:

Configure the servers.

Configure the device pools.

Configure the meet-me number/pattern.

Procedure


Step 1 Find the meet-me number/pattern by using the procedure in the "Finding a Meet-Me Number/Pattern" section.

Step 2 Click the Meet-Me Number/Pattern that you want to delete.

Step 3 Click Delete.


Related Topics

Adding a Software Conference Device

Adding a Hardware Conference Device

Adding a Cisco IOS Conference Bridge Device

Updating a Conference Device

Deleting a Conference Device

Updating Conference Bridge Parameters

Finding a Meet-Me Number/Pattern

Adding a Meet-Me Number/Pattern

Updating a Meet-Me Number/Pattern

Conference Bridges, Cisco CallManager System Guide

Meet-Me Number/Pattern Configuration Settings

Table 37-1 describes the meet-me number/pattern configuration settings.

Table 37-1 Meet-Me Number/Pattern Configuration Settings 

Field
Description

Directory Number or Pattern

Enter a Meet-Me Numbers/pattern or a range of numbers (such as 8000 to 8009).

Description

Enter up to 30 alphanumeric characters for a description of the meet-me number/pattern.

Partition

To use a partition to restrict access to the meet-me/number pattern, choose the desired partition from the drop-down list box.

If you do not want to restrict access to the meet-me number/pattern, choose <None> for the partition. See the "Partition Configuration" section for more information.

If more than 250 partitions exist, the ellipsis (...) button displays next to the drop-down list box. Click the ... button to display the Select Partition window. Enter a partial partition name in the List items where Name contains field. Click the desired partition name in the list of partitions that displays in the Select item to use box and click OK.

Note Make sure that the combination of meet-me number/pattern and partition is unique within the Cisco CallManager cluster.


Related Topics

Finding a Meet-Me Number/Pattern

Adding a Meet-Me Number/Pattern

Updating a Meet-Me Number/Pattern

Deleting a Meet-Me Number/Pattern