Table Of Contents
FIBRE-CHANNEL-FE-MIB Objects
FIBRE CHANNEL-FE-MIB Definitions
Configuration Group
fcFeFabricName (1.3.6.1.2.1.75.1.1.1)
fcFeElementName (1.3.6.1.2.1.75.1.1.2)
fcFeModuleCapacity (1.3.6.1.2.1.75.1.1.3)
Module Table
fcFeModuleDescr (1.3.6.1.2.1.75.1.1.4.1.2)
fcFeModuleObjectID (1.3.6.1.2.1.75.1.1.4.1.3)
fcFeModuleOperStatus (1.3.6.1.2.1.75.1.1.4.1.4)
fcFeModuleLastChange (1.3.6.1.2.1.75.1.1.4.1.5)
fcFeModuleFxPortCapacity (1.3.6.1.2.1.75.1.1.4.1.6)
fcFeModuleName (1.3.6.1.2.1.75.1.1.4.1.7)
FxPort Configuration Table
fcFxPortName (1.3.6.1.2.1.75.1.1.5.1.2)
fcFxPortFcphVersionHigh (1.3.6.1.2.1.75.1.1.5.1.3)
fcFxPortFcphVersionLow (1.3.6.1.2.1.75.1.1.5.1.4)
fcFxPortBbCredit (1.3.6.1.2.1.75.1.1.5.1.5)
fcFxPortRxBufSize (1.3.6.1.2.1.75.1.1.5.1.6)
fcFxPortRatov (1.3.6.1.2.1.75.1.1.5.1.7)
fcFxPortEdtov (1.3.6.1.2.1.75.1.1.5.1.8)
fcFxPortCosSupported (1.3.6.1.2.1.75.1.1.5.1.9)
fcFxPortIntermixSupported (1.3.6.1.2.1.75.1.1.5.1.10)
fcFxPortStackedConnMode (1.3.6.1.2.1.75.1.1.5.1.11)
fcFxPortClass2SeqDeliv (1.3.6.1.2.1.75.1.1.5.1.12)
fcFxPortClass3SeqDeliv (1.3.6.1.2.1.75.1.1.5.1.13)
fcFxPortHoldTime (1.3.6.1.2.1.75.1.1.5.1.14)
Status Group
fcFxPortID (1.3.6.1.2.1.75.1.2.1.1.1)
fcFxPortBbCreditAvailable (1.3.6.1.2.1.75.1.2.1.1.2)
fcFxPortOperMode (1.3.6.1.2.1.75.1.2.1.1.3)
fcFxPortAdminMode (1.3.6.1.2.1.75.1.2.1.1.4)
FxPort Physical Level Table
fcFxPortPhysAdminStatus (1.3.6.1.2.1.75.1.2.2.1.1)
fcFxPortPhysOperStatus (1.3.6.1.2.1.75.1.2.2.1.2)
fcFxPortPhysLastChange (1.3.6.1.2.1.75.1.2.2.1.3)
fcFxPortPhysRttov (1.3.6.1.2.1.75.1.2.2.1.4)
Fx Port Fabric Login Table
fcFxPortFcphVersionAgreed (1.3.6.1.2.1.75.1.2.3.1.2)
fcFxPortNxPortBbCredit (1.3.6.1.2.1.75.1.2.3.1.3)
fcFxPortNxPortRxDataFieldSize (1.3.6.1.2.1.75.1.2.3.1.4)
fcFxPortCosSuppAgreed (1.3.6.1.2.1.75.1.2.3.1.5)
fcFxPortIntermixSuppAgreed (1.3.6.1.2.1.75.1.2.3.1.6)
fcFxPortStackedConnModeAgreed (1.3.6.1.2.1.75.1.2.3.1.7)
fcFxPortClass2SeqDelivAgreed (1.3.6.1.2.1.75.1.2.3.1.8)
fcFxPortClass3SeqDelivAgreed (1.3.6.1.2.1.75.1.2.3.1.9)
fcFxPortNxPortName (1.3.6.1.2.1.75.1.2.3.1.10)
fcFxPortConnectedNxPort (1.3.6.1.2.1.75.1.2.3.1.11)
fcFxPortBbCreditModel (1.3.6.1.2.1.75.1.2.3.1.12)
Error Group
fcFxPortLinkFailures (1.3.6.1.2.1.75.1.3.1.1.1)
fcFxPortSyncLosses (1.3.6.1.2.1.75.1.3.1.1.2)
fcFxPortSigLosses (1.3.6.1.2.1.75.1.3.1.1.3)
fcFxPortPrimSeqProtoErrors (1.3.6.1.2.1.75.1.3.1.1.4)
fcFxPortInvalidTxWords (1.3.6.1.2.1.75.1.3.1.1.5)
fcFxPortInvalidCrcs (1.3.6.1.2.1.75.1.3.1.1.6)
fcFxPortDelimiterErrors (1.3.6.1.2.1.75.1.3.1.1.7)
fcFxPortAddressIdErrors (1.3.6.1.2.1.75.1.3.1.1.8)
fcFxPortLinkResetIns (1.3.6.1.2.1.75.1.3.1.1.9)
fcFxPortLinkResetOuts (1.3.6.1.2.1.75.1.3.1.1.10)
fcFxPortOlsIns (1.3.6.1.2.1.75.1.3.1.1.11)
fcFxPortOlsOuts (1.3.6.1.2.1.75.1.3.1.1.12)
Accounting Groups
Class 1 Accounting Table
fcFxPortC1InFrames (1.3.6.1.2.1.75.1.4.1.1.1)
fcFxPortC1OutFrames (1.3.6.1.2.1.75.1.4.1.1.2)
fcFxPortC1InOctets (1.3.6.1.2.1.75.1.4.1.1.3)
fcFxPortC1OutOctets (1.3.6.1.2.1.75.1.4.1.1.4)
fcFxPortC1Discards (1.3.6.1.2.1.75.1.4.1.1.5)
fcFxPortC1FbsyFrames (1.3.6.1.2.1.75.1.4.1.1.6)
fcFxPortC1FrjtFrames (1.3.6.1.2.1.75.1.4.1.1.7)
fcFxPortC1InConnections (1.3.6.1.2.1.75.1.4.1.1.8)
fcFxPortC1OutConnections (1.3.6.1.2.1.75.1.4.1.1.9)
fcFxPortC1ConnTime (1.3.6.1.2.1.75.1.4.1.1.10)
Class 2 Accounting Table
fcFxPortC2InFrames (1.3.6.1.2.1.75.1.4.2.1.1)
fcFxPortC2OutFrames (1.3.6.1.2.1.75.1.4.2.1.2)
fcFxPortC2InOctets (1.3.6.1.2.1.75.1.4.2.1.3)
fcFxPortC2OutOctets (1.3.6.1.2.1.75.1.4.2.1.4)
fcFxPortC2Discards (1.3.6.1.2.1.75.1.4.2.1.5)
fcFxPortC2FbsyFrames (1.3.6.1.2.1.75.1.4.2.1.6)
fcFxPortC2FrjtFrames (1.3.6.1.2.1.75.1.4.2.1.7)
Class 3 Accounting Table
fcFxPortC3InFrames (1.3.6.1.2.1.75.1.4.3.1.1)
fcFxPortC3OutFrames (1.3.6.1.2.1.75.1.4.3.1.2)
fcFxPortC3InOctets (1.3.6.1.2.1.75.1.4.3.1.3)
fcFxPortC3OutOctets (1.3.6.1.2.1.75.1.4.3.1.4)
fcFxPortC3Discards (1.3.6.1.2.1.75.1.4.3.1.5)
Capability Group
fcFxPortCapFcphVersionHigh (1.3.6.1.2.1.75.1.5.1.1.1)
fcFxPortCapFcphVersionLow (1.3.6.1.2.1.75.1.5.1.1.2)
fcFxPortCapBbCreditMax (1.3.6.1.2.1.75.1.5.1.1.3)
fcFxPortCapBbCreditMin (1.3.6.1.2.1.75.1.5.1.1.4)
fcFxPortCapRxDataFieldSizeMax (1.3.6.1.2.1.75.1.5.1.1.5)
fcFxPortCapRxDataFieldSizeMin (1.3.6.1.2.1.75.1.5.1.1.6)
fcFxPortCapCos (1.3.6.1.2.1.75.1.5.1.1.7)
fcFxPortCapIntermix (1.3.6.1.2.1.75.1.5.1.1.8)
fcFxPortCapStackedConnMode (1.3.6.1.2.1.75.1.5.1.1.9)
fcFxPortCapClass2SeqDeliv (1.3.6.1.2.1.75.1.5.1.1.10)
fcFxPortCapClass3SeqDeliv (1.3.6.1.2.1.75.1.5.1.1.11)
fcFxPortCapHoldTimeMaxv (1.3.6.1.2.1.75.1.5.1.1.12)
fcFxPortCapHoldTimeMin (1.3.6.1.2.1.75.1.5.1.1.13)
FIBRE-CHANNEL-FE-MIB Objects
This section covers the implementation details for the Fabric Element Management Information Base (FIBRE-CHANNEL-FE-MIB) on the Cisco MDS 9020 Fabric Switch.
Note You can access and download the FIBRE-CHANNEL-FE-MIB document from the following link: http://rfc.net/rfc2837.html
FIBRE CHANNEL-FE-MIB Definitions
The textual substitutions in Table 4-1 are specific to the FIBRE-CHANNEL-FE-MIB and can be used in place of primitive data types.
Table 4-1 FIBRE-CHANNEL-FE-MIB Textual Substitutions
Description
|
Syntax
|
MilliSeconds
|
Unsigned32
|
MicroSeconds
|
Unsigned32
|
FcNameId
|
OCTET STRING (SIZE (8))
|
FcAddressId
|
OCTET STRING (SIZE (3))
|
FcRxDataFieldSize
|
Integer32 (128..2112)
|
FcBbCredit
|
Integer32 (0..32767)
|
FcphVersion
|
Integer32 (0..255)
|
FcStackedConnMode
|
INTEGER {
none(1),
transparent(2),
lockedDown(3)
}
|
FcCosCap
|
BITS {
classF(0),
class1(1),
class2(2),
class3(3),
class4(4),
class5(5),
class6(6)
}
|
FcCosCap
|
BITS {
classF(0),
class1(1),
class2(2),
class3(3),
class4(4),
class5(5),
class6(6)
}
|
FcFeModuleCapacity
|
Unsigned32
|
FcFeFxPortCapacity
|
Unsigned32
|
FcFeModuleIndex
|
Unsigned32
|
FcFeFxPortIndex
|
Unsigned32
|
FcFeNxPortIndex
|
Integer32 (1..126)
|
FcBbCreditModel
|
INTEGER { regular(1), alternate (2) }
|
Configuration Group
This group consists of scalar objects and tables. It contains the configuration and service parameters of the Fabric Element and the FxPorts. The group represents a set of parameters associated with the Fabric Element or an FxPort to support its NxPorts. The objects described in this section are not in a table format. An example of how to access one of these objects is:
"snmpget localhost public fcFeFabricName.0".
•fcFeFabricName (1.3.6.1.2.1.75.1.1.1)
•fcFeElementName (1.3.6.1.2.1.75.1.1.2)
•fcFeModuleCapacity (1.3.6.1.2.1.75.1.1.3)
fcFeFabricName (1.3.6.1.2.1.75.1.1.1)
The Name_Identifier of the fabric to which this fabric element belongs.
Syntax Description
FcNameId
Access
Read-write
Status
Current
Return Value
The switch WWN. For example, 10 00 00 C0 DD 00 71 C9. Writes are not supported.
fcFeElementName (1.3.6.1.2.1.75.1.1.2)
The Name_Identifier of the Fabric Element.
Syntax Description
FcNameId
Access
Read-write
Status
Current
Return Value
The switch WWN. For example, 10 00 00 C0 DD 00 71 C9. Writes are not supported.
fcFeModuleCapacity (1.3.6.1.2.1.75.1.1.3)
The maximum number of modules in the fabric element, regardless of their current state.
Syntax Description
FcFeModuleCapacity
Access
Read-only
Status
Current
Return Value
The total number of switches in the fabric if ProxyEnable setting is Enabled on the out-of-band switch. If ProxyEnable setting is disabled on the out-of-band switch, return value = 1.
Module Table
The objects described in this section are in table format indexed by switch. An example of how to access one of these objects is "snmpget localhost public fcFeModuleDescr.1". This table contains one entry for each module.
•fcFeModuleDescr (1.3.6.1.2.1.75.1.1.4.1.2)
•fcFeModuleObjectID (1.3.6.1.2.1.75.1.1.4.1.3)
•fcFeModuleOperStatus (1.3.6.1.2.1.75.1.1.4.1.4)
•fcFeModuleLastChange (1.3.6.1.2.1.75.1.1.4.1.5)
•fcFeModuleFxPortCapacity (1.3.6.1.2.1.75.1.1.4.1.6)
•fcFeModuleName (1.3.6.1.2.1.75.1.1.4.1.7)
fcFeModuleDescr (1.3.6.1.2.1.75.1.1.4.1.2)
A textual description of the module. This value should include the full name and version identification of the module.
Syntax Description
SnmpAdminString
Access
Read-only
Status
Current
Return Value
A configurable description of the module table entry. The default is MDS 9020 FC Switch.
fcFeModuleObjectID (1.3.6.1.2.1.75.1.1.4.1.3)
The vendor's authoritative identification of the module. This value may be allocated within the SMI enterprises subtree (1.3.6.1.4.1), and provides a means for determining what kind of module is being managed.
For example, this object could take the value 1.3.6.1.4.1.99649.3.9 if vendor "Neufe Inc." was assigned the subtree 1.3.6.1.4.1.99649, and had assigned the identifier 1.3.6.1.4.1.99649.3.9 to its FeFiFo-16 PlugInCard.
Syntax Description
OBJECT IDENTIFIER
Access
Read-only
Status
Current
Return Value
1.3.6.1.4.1.9.12.3.1.3.514
fcFeModuleOperStatus (1.3.6.1.2.1.75.1.1.4.1.4)
Switch definitions map 1-to-1 with the MIB definitions. This object indicates the operational status of the module.
•online (1) - the module is functioning properly
•offline (2) - the module is not available
•testing (3) - the module is under testing
•faulty (4) - the module is defective in some way
INTEGER { online(1), offline(2), testing(3), faulty(4) }
Syntax Description
online(1)
|
Functional
|
offline(2)
|
Not available
|
testing(3)
|
Under testing
|
faulty(4)
|
Defective
|
Access
Read-only
Status
Current
Return Value
The operational status of that module.
Table 4-2 Module Operational Status Return Values
Mode
|
Return Value
|
online
|
online(1)
|
offline
|
offline(2)
|
diagnostics
|
testing(3)
|
other
|
faulty(4)
|
fcFeModuleLastChange (1.3.6.1.2.1.75.1.1.4.1.5)
This object contains the value of sysUpTime when the module entered its current operational status. A value of zero indicates that the operational status of the module has not changed since the agent last restarted.
Syntax Description
TimeStamp
Access
Read-only
Status
Current
Return Value
Returns the time when the last status change occurred.
fcFeModuleFxPortCapacity (1.3.6.1.2.1.75.1.1.4.1.6)
The number of FxPort that can be contained within the module. Within each module, the ports are uniquely numbered in the range from 1 to fcFeModuleFxPortCapacity inclusive. However, the numbers are not required to be contiguous.
Syntax Description
FcFeFxPortCapacity
Access
Read-only
Status
Current
Return Value
The total number of ports capability on the switch (20).
fcFeModuleName (1.3.6.1.2.1.75.1.1.4.1.7)
The Name_Identifier of the switch.
Syntax Description
FcNameId
Access
Read-write
Status
Current
Return Value
The switch WWN. Writes are not supported. For example, 10 00 00 C0 DD 00 71 C9.
FxPort Configuration Table
The objects described in this section are in table format indexed by switch index and port index. An example of how to access one of these objects is "snmpget localhost public fcFxPortName.1.1". This table contains one entry for each FxPort and Configuration parameters of the ports. This table contains, one entry for each FxPort, configuration parameters of the ports.
•fcFxPortName (1.3.6.1.2.1.75.1.1.5.1.2)
•fcFxPortFcphVersionHigh (1.3.6.1.2.1.75.1.1.5.1.3)
•fcFxPortFcphVersionLow (1.3.6.1.2.1.75.1.1.5.1.4)
•fcFxPortBbCredit (1.3.6.1.2.1.75.1.1.5.1.5)
•fcFxPortRxBufSize (1.3.6.1.2.1.75.1.1.5.1.6)
•fcFxPortRatov (1.3.6.1.2.1.75.1.1.5.1.7)
•fcFxPortEdtov (1.3.6.1.2.1.75.1.1.5.1.8)
•fcFxPortCosSupported (1.3.6.1.2.1.75.1.1.5.1.9)
•fcFxPortIntermixSupported (1.3.6.1.2.1.75.1.1.5.1.10)
•fcFxPortStackedConnMode (1.3.6.1.2.1.75.1.1.5.1.11)
•fcFxPortClass2SeqDeliv (1.3.6.1.2.1.75.1.1.5.1.12)
•fcFxPortClass3SeqDeliv (1.3.6.1.2.1.75.1.1.5.1.13)
•fcFxPortHoldTime (1.3.6.1.2.1.75.1.1.5.1.14)
fcFxPortName (1.3.6.1.2.1.75.1.1.5.1.2)
The WWPN of this FxPort. Each FxPort has a unique WWPN within the fabric.
Syntax Description
FcNameId
Access
Read-only
Status
Current
Return Value
Returns the WWPN for each port on switch. For example, the return value for port #2 would be 20 02 00 C0 DD 00 71 C9, and the return value for port #14 would be 20 0E 00 C0 DD 00 71 C9.
fcFxPortFcphVersionHigh (1.3.6.1.2.1.75.1.1.5.1.3)
The highest or most recent version of FC-PH that the FxPort is configured to support.
Syntax Description
FcphVersion
Access
Read-only
Status
Current
Return Value
Always returns 32 (0x20)
fcFxPortFcphVersionLow (1.3.6.1.2.1.75.1.1.5.1.4)
The lowest or earliest version of FC-PH that the FxPort is configured to support.
Syntax Description
FcphVersion
Access
Read-only
Status
Current
Return Value
Always returns 9
fcFxPortBbCredit (1.3.6.1.2.1.75.1.1.5.1.5)
The total number of receive buffers available for holding Class 1 connect-request, Class 2, or Class3 frames from the attached NxPort. It is for buffer-to-buffer flow control in the direction from the attached NxPort (if applicable) to FxPort.
Syntax Description
FcBbCredit
Access
Read-only
Status
Current
Return Value
The default number of receive buffers for each port, unless extended credits are used (16).
fcFxPortRxBufSize (1.3.6.1.2.1.75.1.1.5.1.6)
The largest Data_Field Size (in octets) for an FT_1 frame that can be received by the FxPort.
Syntax Description
FcRxDataFieldSize
Access
Read-only
Status
Current
Return Value
Always returns 2112 (0x840)
fcFxPortRatov (1.3.6.1.2.1.75.1.1.5.1.7)
The Resource_Allocation_Timeout Value configured for the FxPort. This is used as the timeout value for determining when to reuse an NxPort resource such as a Recovery_Qualifier. It represents E_D_TOV plus twice the maximum time that a frame may be delayed within the fabric and still be delivered. See "fcFxPortEdtov (1.3.6.1.2.1.75.1.1.5.1.8)" section for more information.
Syntax Description
MilliSeconds
Access
Read-only
Status
Current
Return Value
The default is 10000 (0x2710).
fcFxPortEdtov (1.3.6.1.2.1.75.1.1.5.1.8)
The E_D_TOV value configured for the FxPort. The Error_Detect_Timeout Value is used as the timeout value for detecting an error condition.
Syntax Description
MilliSeconds
Access
Read-only
Status
Current
Return Value
The default is 2000 (0x7D0).
fcFxPortCosSupported (1.3.6.1.2.1.75.1.1.5.1.9)
A value indicating the set of classes of service supported by the FxPort.
Syntax Description
FcCosCap
Access
Read-only
Status
Current
Return Value
Always returns Class 3, 2, and F (0x0D)
fcFxPortIntermixSupported (1.3.6.1.2.1.75.1.1.5.1.10)
A flag indicating whether or not the FxPort supports an Intermixed Dedicated Connection.
Syntax Description
TruthValue
Access
Read-only
Status
Current
Return Value
Always returns False (2)
fcFxPortStackedConnMode (1.3.6.1.2.1.75.1.1.5.1.11)
A value indicating the mode of Stacked Connect supported by the FxPort.
Syntax Description
FcStackedConnMode
Access
Read-only
Status
Current
Return Value
Always returns None (1)
fcFxPortClass2SeqDeliv (1.3.6.1.2.1.75.1.1.5.1.12)
A flag indicating whether or not Class 2 Sequential Delivery is supported by the FxPort.
Syntax Description
TruthValue
Access
Read-only
Status
Current
Return Value
Always returns True (1)
fcFxPortClass3SeqDeliv (1.3.6.1.2.1.75.1.1.5.1.13)
A flag indicating whether or not Class 3 Sequential Delivery is supported by the FxPort.
Syntax Description
TruthValue
Access
Read-only
Status
Current
Return Value
Always returns True (1)
fcFxPortHoldTime (1.3.6.1.2.1.75.1.1.5.1.14)
The maximum time, in microseconds, that the FxPort shall hold a frame before discarding the frame if it is unable to deliver the frame. The value 0 means that the FxPort does not support this parameter.
Syntax Description
MicroSeconds
Access
Read-only
Status
Current
Return Value
The default ED_TOV parameter is 2000 (0x7D0).
Status Group
The objects described in this section are in table format indexed by switch index and port index. An example of how to access one of these objects is "snmpget localhost public fcFxPortId.1.1". This group consists of tables that contain operational status and established service parameters for the Fabric Element and the attached NxPorts.
This group consists of tables that contains operational status and established service parameters for the Fabric Element and the attached NxPorts. This table contains one entry for each FxPort, and the operational status and parameters of the FxPorts.
•fcFxPortID (1.3.6.1.2.1.75.1.2.1.1.1)
•fcFxPortBbCreditAvailable (1.3.6.1.2.1.75.1.2.1.1.2)
•fcFxPortOperMode (1.3.6.1.2.1.75.1.2.1.1.3)
•fcFxPortAdminMode (1.3.6.1.2.1.75.1.2.1.1.4)
fcFxPortID (1.3.6.1.2.1.75.1.2.1.1.1)
The address identifier by which this FxPort is identified within the fabric. The FxPort may assign its address identifier to its attached NxPort(s) during Fabric Login.
Syntax Description
FcAddressId
Access
Read-only
Status
Current
Return Value
The address of each port based on Domain, Area, and ALPA (for example, 64 03 00).
fcFxPortBbCreditAvailable (1.3.6.1.2.1.75.1.2.1.1.2)
The number of buffers currently available for receiving frames from the attached port in the buffer-to-buffer flow control. The value should be less than or equal to fcFxPortBbCredit.
Syntax Description
Gauge32
Access
Read-only
Status
Current
Return Value
Always returns (1) unknown
fcFxPortOperMode (1.3.6.1.2.1.75.1.2.1.1.3)
The current operational mode of the FxPort.
Syntax Description
INTEGER { unknown(1), fPort(2), flPort(3) }
Access
Read-only
Status
Current
Return Value
See Table 4-3 for fcFxPortOperMode return values.
Table 4-3 Port Operational Modes
Mode
|
Return Value
|
Unknown
|
1
|
F_Port
|
2
|
FL_Port
|
3
|
fcFxPortAdminMode (1.3.6.1.2.1.75.1.2.1.1.4)
The desired operational mode of the FxPort.
Syntax Description
INTEGER { fPort(2), flPort(3) }
Access
Read-write
Status
Current
Return Value
Unsupported. Always returns error status "NoSuchName".
FxPort Physical Level Table
The objects described in this section are in table format indexed by switch index and port index. An example of how to access one of these objects is "snmpget localhost public fcFxPortPhysAdminStatus.1.1". This table contains one entry for each FxPort in the Fabric Element, the physical level status, and parameters of the FxPorts.
This table contains one entry for each FxPort in the Fabric Element, and the physical level status and parameters of the FxPorts.
•fcFxPortPhysAdminStatus (1.3.6.1.2.1.75.1.2.2.1.1)
•fcFxPortPhysOperStatus (1.3.6.1.2.1.75.1.2.2.1.2)
•fcFxPortPhysLastChange (1.3.6.1.2.1.75.1.2.2.1.3)
•fcFxPortPhysRttov (1.3.6.1.2.1.75.1.2.2.1.4)
fcFxPortPhysAdminStatus (1.3.6.1.2.1.75.1.2.2.1.1)
The desired state of the FxPort. A management station may place the FxPort in a desired state by setting this object accordingly. The testing(3) state indicates that no operational frames can be passed. When a Fabric Element initializes, all FxPorts start with fcFxPortPhysAdminStatus in the offline(2) state. As the result of either explicit management action or per configuration information accessible by the Fabric Element, fcFxPortPhysAdminStatus is then changed to either the online(1) or testing(3) states, or remains in the offline state.
INTEGER { online(1), offline(2), testing(3) }
Syntax Description
online(1)
|
Place port online
|
offline(2)
|
Take port offline
|
testing(3)
|
Initiate test procedures
|
Access
Read-write
Status
Current
Return Value
See Table 4-4 for fcFxPortPhysAdminStatus read values.
Table 4-4 fcFxPortPhysAdminStatus Read Return Values
Port
|
Value
|
Online
|
online (1)
|
Offline
|
offline (2)
|
Diagnostics
|
testing (3)
|
Down
|
offline (2)
|
See Table 4-5 for fcFxPortPhysAdminStatus write values.
Table 4-5 fcFxPortPhysAdminStatus Write Values
Port
|
Value
|
Online
|
online (1)
|
Offline
|
offline (2)
|
Diagnostics
|
testing (3)
|
fcFxPortPhysOperStatus (1.3.6.1.2.1.75.1.2.2.1.2)
The current operational status of the FxPort. The testing(3) indicates that no operational frames can be passed. If fcFxPortPhysAdminStatus is offline(2), then fcFxPortPhysOperStatus should be offline(2). If fcFxPortPhysAdminStatus is changed to online(1), then fcFxPortPhysOperStatus should change to online(1). If the FxPort is ready to accept Fabric Login request from the attached NxPort, it should proceed and remain in the link- failure(4) state if, and only if, there is a fault that prevents it from going to the online(1) state.
INTEGER { online(1), offline(2), testing(3), linkFailure(4) }
Syntax Description
online(1)
|
Login may proceed
|
offline(2)
|
Login cannot proceed
|
testing(3)
|
Port is under test
|
linkFailure(4)
|
Failure after online/testing
|
Access
Read-only
Status
Current
Return Value
See Table 4-6 for fcFxPortPhysOperStatus return values.
Table 4-6 fcFxPortPHysOperStatus Return Values
Status
|
Return Value
|
Online
|
online (1)
|
Offline
|
offline (2)
|
Diagnostic
|
testing (3)
|
Down
|
linkfailure (4)
|
fcFxPortPhysLastChange (1.3.6.1.2.1.75.1.2.2.1.3)
The value of sysUpTime at the time the FxPort entered its current operational status. A value of zero indicates that the FxPort's operational status has not changed since the agent last restarted.
Syntax Description
TimeStamp
Access
Read-only
Status
Current
Return Value
Returns the time when the last port state change occurred.
fcFxPortPhysRttov (1.3.6.1.2.1.75.1.2.2.1.4)
The Receiver_Transmitter_Timeout value of the FxPort. This is used by the receiver logic to detect a loss of synchronization.
Syntax Description
Milliseconds
Access
Read-write
Status
Current
Return Value
The default RT_TOV parameter is 100 (0x64). This is a global setting for the switch. If writing value to a port, all ports will reflect this new value.
Fx Port Fabric Login Table
The objects described in this section are in table format indexed by switch index and port index. An example of how to access one of these objects is "snmpget localhost public fcFxPortFcphVersionAgreed.1.1". This table contains one entry for each FxPort in the fabric element and the service parameters that have been established from the most recent Fabric Login (implicit or explicit).
This table contains one entry for each FxPort in the fabric element, and the service parameters that have been established from the most recent Fabric Login, implicit or explicit.
•fcFxPortFcphVersionAgreed (1.3.6.1.2.1.75.1.2.3.1.2)
•fcFxPortNxPortBbCredit (1.3.6.1.2.1.75.1.2.3.1.3)
•fcFxPortNxPortRxDataFieldSize (1.3.6.1.2.1.75.1.2.3.1.4)
•fcFxPortCosSuppAgreed (1.3.6.1.2.1.75.1.2.3.1.5)
•fcFxPortIntermixSuppAgreed (1.3.6.1.2.1.75.1.2.3.1.6)
•fcFxPortStackedConnModeAgreed (1.3.6.1.2.1.75.1.2.3.1.7)
•fcFxPortClass2SeqDelivAgreed (1.3.6.1.2.1.75.1.2.3.1.8)
•fcFxPortClass3SeqDelivAgreed (1.3.6.1.2.1.75.1.2.3.1.9)
•fcFxPortNxPortName (1.3.6.1.2.1.75.1.2.3.1.10)
•fcFxPortConnectedNxPort (1.3.6.1.2.1.75.1.2.3.1.11)
•fcFxPortBbCreditModel (1.3.6.1.2.1.75.1.2.3.1.12)
fcFxPortFcphVersionAgreed (1.3.6.1.2.1.75.1.2.3.1.2)
The version of FC-PH that the FxPort has agreed to support from the Fabric Login.
Syntax Description
FcphVersion
Access
Read-only
Status
Current
Return Value
Unsupported.
fcFxPortNxPortBbCredit (1.3.6.1.2.1.75.1.2.3.1.3)
The total number of buffers available for holding class 1 connect-request, class 2, or class 3 frames to be transmitted to the attached NxPort. It is for buffer-to-buffer flow control in the direction from FxPort to NxPort. The buffer-to-buffer flow control mechanism is indicated in the respective fcFxPortBbCreditModel.
Syntax Description
FcBbCredit
Access
Read-only
Status
Current
Return Value
Unsupported.
fcFxPortNxPortRxDataFieldSize (1.3.6.1.2.1.75.1.2.3.1.4)
The Receive Data Field Size of the attached NxPort. This object specifies the largest Data Field Size for an FT_1 frame that can be received by the NxPort.
Syntax Description
FcRxDataFieldSize
Access
Read-only
Status
Current
Return Value
Unsupported.
fcFxPortCosSuppAgreed (1.3.6.1.2.1.75.1.2.3.1.5)
A variable indicating that the attached NxPort has requested the FxPort for the support of classes of services and the FxPort has granted the request.
Syntax Description
FcCosCap
Access
Read-only
Status
Current
Return Value
The bits have the following bit-mapped definition:
For example: If Class 3, return value 0x10.
fcFxPortIntermixSuppAgreed (1.3.6.1.2.1.75.1.2.3.1.6)
A variable indicating that the attached NxPort has requested the FxPort for the support of Intermix and the FxPort has granted the request. This flag is only valid if Class 1 service is supported.
Syntax Description
TruthValue
Access
Read-only
Status
Current
Return Value
Always returns false (2).
fcFxPortStackedConnModeAgreed (1.3.6.1.2.1.75.1.2.3.1.7)
A variable indicating whether the FxPort has agreed to support stacked connect from the Fabric Login. This is only meaningful if the ports are using Class 1 service.
Syntax Description
FcStackedConnMode
Access
Read-only
Status
Current
Return Value
Always returns none (1).
fcFxPortClass2SeqDelivAgreed (1.3.6.1.2.1.75.1.2.3.1.8)
A variable indicating whether the FxPort has agreed to support Class 2 sequential delivery from the Fabric Login. This is only meaningful if the ports are using Class 2 service.
Syntax Description
TruthValue
Access
Read-only
Status
Current
Return Value
Always returns true (1).
fcFxPortClass3SeqDelivAgreed (1.3.6.1.2.1.75.1.2.3.1.9)
A flag indicating whether the FxPort has agreed to support Class 3 sequential delivery from the Fabric Login. This is only meaningful if the ports are using Class 3 service.
Syntax Description
TruthValue
Access
Read-only
Status
Current
Return Value
Always returns true (1).
fcFxPortNxPortName (1.3.6.1.2.1.75.1.2.3.1.10)
The port name of the attached NxPort.
Syntax Description
FcNameId
Access
Read-only
Status
Current
Return Value
Returns the switch port WWPN for the attached device.
fcFxPortConnectedNxPort (1.3.6.1.2.1.75.1.2.3.1.11)
The address identifier of the destination NxPort with which this FxPort is currently engaged in a either a Class 1 or loop connection. If this FxPort is not engaged in a connection, then the value of this object is "000000"H.
Syntax Description
FcAddressId
Access
Read-only
Status
Current
Return Value
Unsupported.
fcFxPortBbCreditModel (1.3.6.1.2.1.75.1.2.3.1.12)
This object identifies the BB_Credit model used by the FxPort.
Syntax Description
FcBbCreditModel
Access
Read-write
Status
Current
Return Value
Returns alternate (2). Writes not supported.
Error Group
The objects described in this section are in table format indexed by switch index and port index. An example of how to access one of these objects is "snmpget localhost public fcFxPortLinkFailures.1.1". This group consists of tables that contain information about the various types of errors detected. The management station may use the information in this group to determine the quality of the link between the FxPort and its attached NxPort.
The FxPort Error table contains, one entry for each FxPort in the Fabric Element, counters recording numbers of errors detected since the management agent reinitialized. The first 6 columnar objects after the port index corresponds to the counters in the Link Error Status Block.
•fcFxPortLinkFailures (1.3.6.1.2.1.75.1.3.1.1.1)
•fcFxPortSyncLosses (1.3.6.1.2.1.75.1.3.1.1.2)
•fcFxPortSigLosses (1.3.6.1.2.1.75.1.3.1.1.3)
•fcFxPortPrimSeqProtoErrors (1.3.6.1.2.1.75.1.3.1.1.4)
•fcFxPortInvalidTxWords (1.3.6.1.2.1.75.1.3.1.1.5)
•fcFxPortInvalidCrcs (1.3.6.1.2.1.75.1.3.1.1.6)
•fcFxPortDelimiterErrors (1.3.6.1.2.1.75.1.3.1.1.7)
•fcFxPortAddressIdErrors (1.3.6.1.2.1.75.1.3.1.1.8)
•fcFxPortLinkResetIns (1.3.6.1.2.1.75.1.3.1.1.9)
•fcFxPortLinkResetOuts (1.3.6.1.2.1.75.1.3.1.1.10)
•fcFxPortOlsIns (1.3.6.1.2.1.75.1.3.1.1.11)
•fcFxPortOlsOuts (1.3.6.1.2.1.75.1.3.1.1.12)
fcFxPortLinkFailures (1.3.6.1.2.1.75.1.3.1.1.1)
The number of link failures detected by this FxPort.
Syntax Description
Counter32
Access
Read-only
Status
Current
Related Commands
The total number of LinkFailures encountered for a port.
fcFxPortSyncLosses (1.3.6.1.2.1.75.1.3.1.1.2)
The number of loss of synchronizations detected by the FxPort.
Syntax Description
Counter32
Access
Read-only
Status
Current
Return Value
The total number of LossOfSyncs encountered for a port.
fcFxPortSigLosses (1.3.6.1.2.1.75.1.3.1.1.3)
The number of loss of signals detected by the FxPort.
Syntax Description
Counter32
Access
Read-only
Status
Current
Return Value
Unsupported. Always returns error status "NoSuchName".
fcFxPortPrimSeqProtoErrors (1.3.6.1.2.1.75.1.3.1.1.4)
The number of primitive sequence protocol errors detected by the FxPort.
Syntax Description
Counter32
Access
Read-only
Status
Current
Return Value
The total number of PrimSeqErrors encountered for a port.
fcFxPortInvalidTxWords (1.3.6.1.2.1.75.1.3.1.1.5)
The number of invalid transmission words detected by the FxPort.
Syntax Description
Counter32
Access
Read-only
Status
Current
Return Value
The total number of DecodeErrors encountered for a port.
fcFxPortInvalidCrcs (1.3.6.1.2.1.75.1.3.1.1.6)
The number of invalid CRCs detected by this FxPort.
Syntax Description
Counter32
Access
Read-only
Status
Current
Return Value
The total number of InvalidCRCs encountered for a port.
fcFxPortDelimiterErrors (1.3.6.1.2.1.75.1.3.1.1.7)
The number of Delimiter Errors detected by this FxPort.
Syntax Description
Counter32
Access
Read-only
Status
Current
Return Value
Unsupported. Always returns error status "NoSuchName".
fcFxPortAddressIdErrors (1.3.6.1.2.1.75.1.3.1.1.8)
The number of address identifier errors detected by this FxPort.
Syntax Description
Counter32
Access
Read-only
Status
Current
Return Value
The total number of InvDestAddrs encountered for a port.
fcFxPortLinkResetIns (1.3.6.1.2.1.75.1.3.1.1.9)
The number of Link Reset Protocols received by this FxPort from the attached NxPort.
Syntax Description
Counter32
Access
Read-only
Status
Current
Return Value
The total number of RxLinkResets received by a port.
fcFxPortLinkResetOuts (1.3.6.1.2.1.75.1.3.1.1.10)
The number of Link Reset Protocols issued by this FxPort to the attached NxPort.
Syntax Description
Counter32
Access
Read-only
Status
Current
Return Value
The total number of TxLinkResets sent by a port.
fcFxPortOlsIns (1.3.6.1.2.1.75.1.3.1.1.11)
The number of Offline Sequences received by this FxPort.
Syntax Description
Counter32
Access
Read-only
Status
Current
Return Value
The total number of RxOfflineSeqs received by a port.
fcFxPortOlsOuts (1.3.6.1.2.1.75.1.3.1.1.12)
The number of Offline Sequences issued by this FxPort.
Syntax Description
Counter32
Access
Read-only
Status
Current
Return Value
The total number of TxOflineSeqs sent by a port.
Accounting Groups
Each group consists of a table that contains accounting information for the FxPorts in the Fabric Element: Class 1 Accounting Group, Class 2 Accounting Group, and Class 3 Accounting Group.
Class 1 Accounting Table
The objects described in this section are in table format indexed by switch index and port index. An example of how to access one of these objects is "snmpget localhost public fcFxPortC1InFrames.1.1". This table contains one entry for each FxPort in the Fabric Element and Counter32s for certain types of events that have occurred in the FxPorts since the management agent was reinitialized.
•fcFxPortC1InFrames (1.3.6.1.2.1.75.1.4.1.1.1)
•fcFxPortC1OutFrames (1.3.6.1.2.1.75.1.4.1.1.2)
•fcFxPortC1InOctets (1.3.6.1.2.1.75.1.4.1.1.3)
•fcFxPortC1OutOctets (1.3.6.1.2.1.75.1.4.1.1.4)
•fcFxPortC1Discards (1.3.6.1.2.1.75.1.4.1.1.5)
•fcFxPortC1FbsyFrames (1.3.6.1.2.1.75.1.4.1.1.6)
•fcFxPortC1FrjtFrames (1.3.6.1.2.1.75.1.4.1.1.7)
•fcFxPortC1InConnections (1.3.6.1.2.1.75.1.4.1.1.8)
•fcFxPortC1OutConnections (1.3.6.1.2.1.75.1.4.1.1.9)
•fcFxPortC1ConnTime (1.3.6.1.2.1.75.1.4.1.1.10)
fcFxPortC1InFrames (1.3.6.1.2.1.75.1.4.1.1.1)
The number of Class 1 frames (other than Class 1 connect-request) received by this FxPort from its attached NxPort.
Syntax Description
Counter32
Access
Read-only
Status
Current
Return Value
Unsupported. Always returns error status "NoSuchName".
fcFxPortC1OutFrames (1.3.6.1.2.1.75.1.4.1.1.2)
The number of Class 1 frames (other than Class 1 connect- request) delivered through this FxPort to its attached NxPort.
Syntax Description
Counter32
Access
Read-only
Status
Current
Return Value
Unsupported. Always returns error status "NoSuchName".
fcFxPortC1InOctets (1.3.6.1.2.1.75.1.4.1.1.3)
The number of Class 1 frame octets, including the frame delimiters, received by this FxPort from its attached NxPort.
Syntax Description
Counter32
Access
Read-only
Status
Current
Return Value
Unsupported. Always returns error status "NoSuchName".
fcFxPortC1OutOctets (1.3.6.1.2.1.75.1.4.1.1.4)
The number of Class 1 frame octets, including the frame delimiters, delivered through this FxPort its attached NxPort.
Syntax Description
Counter32
Access
Read-only
Status
Current
Return Value
Unsupported. Always returns error status "NoSuchName".
fcFxPortC1Discards (1.3.6.1.2.1.75.1.4.1.1.5)
The number of Class 1 frames discarded by this FxPort.
Syntax Description
Counter32
Access
Read-only
Status
Current
Return Value
Unsupported. Always returns error status "NoSuchName".
fcFxPortC1FbsyFrames (1.3.6.1.2.1.75.1.4.1.1.6)
The number of F_BSY frames generated by this FxPort against Class 1 connect-request.
Syntax Description
Counter32
Access
Read-only
Status
Current
Return Value
Unsupported. Always returns error status "NoSuchName".
fcFxPortC1FrjtFrames (1.3.6.1.2.1.75.1.4.1.1.7)
The number of F_RJT frames generated by this FxPort against Class 1 connect-request.
Syntax Description
Counter32
Access
Read-only
Status
Current
Return Value
Unsupported. Always returns error status "NoSuchName".
fcFxPortC1InConnections (1.3.6.1.2.1.75.1.4.1.1.8)
The number of Class 1 connections successfully established in which the attached NxPort is the source of the connect-request.
Syntax Description
Counter32
Access
Read-only
Status
Current
Return Value
Unsupported. Always returns error status "NoSuchName".
fcFxPortC1OutConnections (1.3.6.1.2.1.75.1.4.1.1.9)
The number of Class 1 connections successfully established in which the attached NxPort is the destination of the connect-request.
Syntax Description
Counter32
Access
Read-only
Status
Current
Return Value
Unsupported. Always returns error status "NoSuchName".
fcFxPortC1ConnTime (1.3.6.1.2.1.75.1.4.1.1.10)
The cumulative time that this FxPort has been engaged in Class 1 connection. The amount of time is counted from after a connect-request has been accepted until the connection is disengaged, either by an EOFdt or Link Reset.
Syntax Description
Milliseconds
Access
Read-only
Status
current
Return Value
Unsupported. Always returns error status "NoSuchName".
Class 2 Accounting Table
The objects described in this section are in table format indexed by switch index and port index. An example of how to access one of these objects is "snmpget localhost public fcFxPortC2InFrames.1.1". This table contains one entry for each FxPort in the Fabric Element and Counter32s for certain types of events that have occurred in the FxPorts since the management agent was reinitialized.
•fcFxPortC2InFrames (1.3.6.1.2.1.75.1.4.2.1.1)
•fcFxPortC2OutFrames (1.3.6.1.2.1.75.1.4.2.1.2)
•fcFxPortC2InOctets (1.3.6.1.2.1.75.1.4.2.1.3)
•fcFxPortC2OutOctets (1.3.6.1.2.1.75.1.4.2.1.4)
•fcFxPortC2Discards (1.3.6.1.2.1.75.1.4.2.1.5)
•fcFxPortC2FbsyFrames (1.3.6.1.2.1.75.1.4.2.1.6)
•fcFxPortC2FrjtFrames (1.3.6.1.2.1.75.1.4.2.1.7)
fcFxPortC2InFrames (1.3.6.1.2.1.75.1.4.2.1.1)
The number of Class 2 frames received by this FxPort from its attached NxPort.
Syntax Description
Counter32
Access
Read-only
Status
Current
Return Value
The total number of Class2FramesIn received by a port.
fcFxPortC2OutFrames (1.3.6.1.2.1.75.1.4.2.1.2)
The number of Class 2 frames delivered through this FxPort to its attached NxPort.
Syntax Description
Counter32
Access
Read-only
Status
Current
Return Value
The total number of Class2FramesOut sent by a port.
fcFxPortC2InOctets (1.3.6.1.2.1.75.1.4.2.1.3)
The number of Class 2 frame octets, including the frame delimiters, received by this FxPort from its attached NxPort.
Syntax Description
Counter32
Access
Read-only
Status
Current
Return Value
The total number of Class2WordsIn received by a port.
fcFxPortC2OutOctets (1.3.6.1.2.1.75.1.4.2.1.4)
The number of Class 2 frame octets, including the frame delimiters, delivered through this FxPort to its attached NxPort.
Syntax Description
Counter32
Access
Read-only
Status
current
Return Value
The total number of Class2WordsOut sent by a port.
fcFxPortC2Discards (1.3.6.1.2.1.75.1.4.2.1.5)
The number of Class 2 frames discarded by this FxPort.
Syntax Description
Counter32
Access
Read-only
Status
Current
Return Value
The total number of Class2Toss discarded by a port.
fcFxPortC2FbsyFrames (1.3.6.1.2.1.75.1.4.2.1.6)
The number of F_BSY frames generated by this FxPort.
Syntax Description
Counter32
Access
Read-only
Status
Current
Return Value
The total number of FBusy frames generated by this port for Class 2 and 3 frames.
fcFxPortC2FrjtFrames (1.3.6.1.2.1.75.1.4.2.1.7)
The number of F_RJT frames generated by this FxPort against Class 2 frames.
Syntax Description
Counter32
Access
Read-only
Status
Current
Return Value
The total number of FReject frames generated by this port for Class 2 and 3 frames.
Class 3 Accounting Table
The objects described in this section are in table format indexed by switch index and port index. An example of how to access one of these objects is "snmpget localhost public fcFxPortC3InFrames.1.1". This table contains one entry for each FxPort in the Fabric Element and Counter32s for certain types of events that have occurred in the FxPorts since the management agent has reinitialized.
•fcFxPortC3InFrames (1.3.6.1.2.1.75.1.4.3.1.1)
•fcFxPortC3OutFrames (1.3.6.1.2.1.75.1.4.3.1.2)
•fcFxPortC3InOctets (1.3.6.1.2.1.75.1.4.3.1.3)
•fcFxPortC3OutOctets (1.3.6.1.2.1.75.1.4.3.1.4)
•fcFxPortC3Discards (1.3.6.1.2.1.75.1.4.3.1.5)
fcFxPortC3InFrames (1.3.6.1.2.1.75.1.4.3.1.1)
The number of Class 3 frames received by this FxPort from its attached NxPort.
Syntax Description
Counter32
Access
Read-only
Status
Current
Return Value
The total number of Class3FramesIn received by a port.
fcFxPortC3OutFrames (1.3.6.1.2.1.75.1.4.3.1.2)
The number of Class 3 frames delivered through this FxPort to its attached NxPort.
Syntax Description
Counter32
Access
Read-only
Status
Current
Return Value
The total number of Class3FramesOut sent by a port.
fcFxPortC3InOctets (1.3.6.1.2.1.75.1.4.3.1.3)
The number of Class 3 frame octets, including the frame delimiters, received by this FxPort from its attached NxPort.
Syntax Description
Counter32
Access
Read-only
Status
Current
Return Value
The total number of Class3WordsOut received by a port.
fcFxPortC3OutOctets (1.3.6.1.2.1.75.1.4.3.1.4)
The number of Class 3 frame octets, including the frame delimiters, delivered through this FxPort to its attached NxPort.
Syntax Description
Counter32
Access
Read-only
Status
Current
Return Value
The total number of Class3WordsOut sent by a port.
fcFxPortC3Discards (1.3.6.1.2.1.75.1.4.3.1.5)
The number of Class 3 frames discarded by this FxPort.
Syntax Description
Counter32
Access
Read-only
Status
Current
Return Value
The total number of Class3Toss discarded by a port.
Capability Group
The objects described in this section are in table format indexed by switch index and port index. An example of how to access one of these objects is "snmpget localhost public fcFxPortName.1.1". The Capability Group consists of a table describing information about what each FxPort is inherently capable of operating or supporting. A capability may be used as expressed in its respective object value in the Configuration group.
•fcFxPortCapFcphVersionHigh (1.3.6.1.2.1.75.1.5.1.1.1)
•fcFxPortCapFcphVersionLow (1.3.6.1.2.1.75.1.5.1.1.2)
•fcFxPortCapBbCreditMax (1.3.6.1.2.1.75.1.5.1.1.3)
•fcFxPortCapBbCreditMin (1.3.6.1.2.1.75.1.5.1.1.4)
•fcFxPortCapRxDataFieldSizeMax (1.3.6.1.2.1.75.1.5.1.1.5)
•fcFxPortCapRxDataFieldSizeMin (1.3.6.1.2.1.75.1.5.1.1.6)
•fcFxPortCapCos (1.3.6.1.2.1.75.1.5.1.1.7)
•fcFxPortCapIntermix (1.3.6.1.2.1.75.1.5.1.1.8)
•fcFxPortCapStackedConnMode (1.3.6.1.2.1.75.1.5.1.1.9)
•fcFxPortCapClass2SeqDeliv (1.3.6.1.2.1.75.1.5.1.1.10)
•fcFxPortCapClass3SeqDeliv (1.3.6.1.2.1.75.1.5.1.1.11)
•fcFxPortCapHoldTimeMaxv (1.3.6.1.2.1.75.1.5.1.1.12)
•fcFxPortCapHoldTimeMin (1.3.6.1.2.1.75.1.5.1.1.13)
fcFxPortCapFcphVersionHigh (1.3.6.1.2.1.75.1.5.1.1.1)
The highest or most recent version of FC-PH that the FxPort is capable of supporting.
Syntax Description
FcphVersion
Access
Read-only
Status
Current
Return Value
Always returns 32 (0x20).
fcFxPortCapFcphVersionLow (1.3.6.1.2.1.75.1.5.1.1.2)
The lowest or earliest version of FC-PH that the FxPort is capable of supporting.
Syntax Description
FcphVersion
Access
Read-only
Status
Current
Return Value
Always returns 9.
fcFxPortCapBbCreditMax (1.3.6.1.2.1.75.1.5.1.1.3)
The maximum number of receive buffers available for holding Class 1 connect-request, Class 2, or Class 3 frames from the attached NxPort.
Syntax Description
FcBbCredit
Access
Read-only
Status
Current
Return Value
The default is 255 (0xFF).
fcFxPortCapBbCreditMin (1.3.6.1.2.1.75.1.5.1.1.4)
The minimum number of receive buffers available for holding Class 1 connect-request, Class 2, or Class 3 frames from the attached NxPort.
Syntax Description
FcBbCredit
Access
Read-only
Status
Current
Return Value
The default is 0 (0x00).
fcFxPortCapRxDataFieldSizeMax (1.3.6.1.2.1.75.1.5.1.1.5)
The maximum size in bytes of the Data Field in a frame that the FxPort is capable of receiving from its attached NxPort.
Syntax Description
FcRxDataFieldSize
Access
Read-only
Status
Current
Return Value
2112 (0x840).
fcFxPortCapRxDataFieldSizeMin (1.3.6.1.2.1.75.1.5.1.1.6)
The minimum size in bytes of the Data Field in a frame that the FxPort is capable of receiving from its attached NxPort.
Syntax Description
FcRxDataFieldSize
Access
Read-only
Status
Current
Return Value
128 (0x80).
fcFxPortCapCos (1.3.6.1.2.1.75.1.5.1.1.7)
A value indicating the set of classes of service that the FxPort is capable of supporting.
Syntax Description
FcCosCap
Access
Read-only
Status
Current
Return Value
Always returns Class F, 2, and 3 (0x0d).
fcFxPortCapIntermix (1.3.6.1.2.1.75.1.5.1.1.8)
A flag indicating whether or not the FxPort is capable of supporting the intermixing of Class 2 and Class 3 frames during a Class 1 connection. This flag is only valid if the port is capable of supporting Class 1 service.
Syntax Description
TruthValue
Access
Read-only
Status
Current
Return Value
Always returns False (2).
fcFxPortCapStackedConnMode (1.3.6.1.2.1.75.1.5.1.1.9)
A value indicating the mode of Stacked Connect request that the FxPort is capable of supporting.
Syntax Description
FcStackedConnMode
Access
Read-only
Status
Current
Return Value
Always returns None (1).
fcFxPortCapClass2SeqDeliv (1.3.6.1.2.1.75.1.5.1.1.10)
A flag indicating whether or not the FxPort is capable of supporting Class 2 Sequential Delivery.
Syntax Description
TruthValue
Access
Read-only
Status
Current
Return Value
Always returns true (1).
fcFxPortCapClass3SeqDeliv (1.3.6.1.2.1.75.1.5.1.1.11)
A flag indicating whether or not the FxPort is capable of supporting Class 3 Sequential Delivery.
Syntax Description
TruthValue
Access
Read-only
Status
Current
Return Value
Always returns true (1).
fcFxPortCapHoldTimeMaxv (1.3.6.1.2.1.75.1.5.1.1.12)
The maximum holding time that the FxPort is capable of supporting, in microseconds.
Syntax Description
MicroSeconds
Access
Read-only
Status
Current
Return Value
20000 (0x4E20)
fcFxPortCapHoldTimeMin (1.3.6.1.2.1.75.1.5.1.1.13)
The minimum holding time that the FxPort is capable of supporting, in microseconds.
Syntax Description
MicroSeconds
Access
Read-only
Status
Current
Return Value
10 (0x0A)