Cisco IOS路由器-使用NEM配置EzVPN

下载选项

  • PDF     (411.7 KB)
    在各种设备上使用 Adobe Reader 查看
  • ePub     (99.8 KB)
    在 iPhone、iPad、Android、Sony Reader 或 Windows Phone 上使用各种应用查看
  • Mobi (Kindle)     (117.5 KB)
    在 Kindle 设备上查看或在多个设备上使用 Kindle 应用查看
已更新: 2009 年 4 月 13 日
文档 ID:69352

非歧视性语言

此产品的文档集力求使用非歧视性语言。在本文档集中，非歧视性语言是指不隐含针对年龄、残障、性别、种族身份、族群身份、性取向、社会经济地位和交叉性的歧视的语言。由于产品软件的用户界面中使用的硬编码语言、基于 RFP 文档使用的语言或引用的第三方产品使用的语言，文档中可能无法确保完全使用非歧视性语言。 深入了解思科如何使用包容性语言。

关于此翻译

思科采用人工翻译与机器翻译相结合的方式将此文档翻译成不同语言，希望全球的用户都能通过各自的语言得到支持性的内容。 请注意：即使是最好的机器翻译，其准确度也不及专业翻译人员的水平。 Cisco Systems, Inc. 对于翻译的准确性不承担任何责任，并建议您总是参考英文原始文档（已提供链接）。

简介

本文档提供了使用 Easy VPN (EzVPN) 在 Cisco 871 路由器和 Cisco 7200VXR 路由器之间配置 IPsec 的示例配置。7200 充当 Easy VPN 服务器，871 充当 Easy VPN Remote。在本示例中，环回接口在两个路由器上用作专用网络。可根据需要将这些接口替换为其他接口，例如，FastEthernet 或串行接口。

要使用 Easy VPN 在 PIX/ASA 7.x 和 Cisco 871 路由器之间配置 IPsec，请参阅将 ASA 5500 用作服务器，将 Cisco 871 用作 Easy VPN Remote 的 PIX/ASA 7.x Easy VPN 配置示例。

要在 Cisco IOS® Easy VPN Remote Hardware Client 和 PIX Easy VPN 服务器之间配置 IPsec，请参阅 IOS Easy VPN Remote Hardware Client 到 PIX Easy VPN 服务器配置示例。

要在网络扩展模式 (NEM) 下将 Cisco IOS 路由器配置为连接到 Cisco VPN 3000 集中器的 EzVPN，请参阅使用 VPN 3000 集中器在 Cisco IOS 上配置 Cisco EzVPN Client。

先决条件

要求

在尝试此配置之前，请确保您基本了解 IPsec 和 Cisco 7200/871 操作系统。

使用的组件

本文档中的信息基于以下软件和硬件版本：

  • Cisco Easy VPN 服务器是运行 Cisco IOS® 软件版本 12.4(4)T1 的 7200 路由器 (VXR)

  • Cisco Easy VPN Remote 是运行 Cisco IOS 软件版本 12.4(2)T1 的 871W 路由器

本文档中的信息都是基于特定实验室环境中的设备编写的。本文档中使用的所有设备最初均采用原始（默认）配置。如果您使用的是真实网络，请确保您已经了解所有命令的潜在影响。

规则

有关文档规则的详细信息，请参阅 Cisco 技术提示规则。

配置

本部分提供有关如何配置本文档所述功能的信息。

注意：使用命令查找工具(仅注册客户)查找有关本文档中使用的命令的详细信息。

网络图

本文档使用以下网络设置：

easyvpn-7200svr-871remote-1.gif

注意：环回接口正在模拟内部PC。

配置

本文档使用以下配置：

Easy VPN 服务器（Cisco 7200VXR 路由器） 
3-07-07-7200VXR#show running-config
Building configuration...

Current configuration : 2059 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname 3-07-07-7200VXR
!
boot-start-marker
boot-end-marker
!
!

!--- Enable Authentication, Authorizing and Accounting (AAA) !--- for user authentication and group authorization.

aaa new-model
!


!--- Enable the AAA commands in order !--- to enable Xauth for user authentication.

aaa authentication login userauthen local


!--- Enable the AAA commands !--- in order to enable group authorization.

aaa authorization network groupauthor local
!
aaa session-id common
!
resource policy
!
ip subnet-zero
ip cef
!
!

!--- Define the username and password to use for Xauth.

username cisco password 0 cisco123
!
!

!--- Create an Internet Security Association and !--- Key Management Protocol (ISAKMP) policy for Phase 1 negotiations.

crypto isakmp policy 3
 encr 3des
 authentication pre-share
 group 2
!
!

!--- Create a group with the pre-shared key for IKE authentication.

crypto isakmp client configuration group vpngrp
 key cisco123
!
!

!--- Create the Phase 2 policy for actual data encryption.

crypto ipsec transform-set myset esp-3des esp-sha-hmac
!


!--- Create a dynamic map and !--- apply the transform set that was created earlier.

crypto dynamic-map dynmap 10
 set transform-set myset
!
!

!--- Create the actual crypto map, !--- and apply the AAA lists that were created earlier. !--- These commands associate the AAA commands to the crypto map.

crypto map clientmap client authentication list userauthen
crypto map clientmap isakmp authorization list groupauthor
crypto map clientmap 10 ipsec-isakmp dynamic dynmap
!
!
!
interface Loopback10
 ip address 10.10.10.1 255.255.255.0
!
interface GigabitEthernet0/1
 ip address 158.100.101.254 255.255.255.0
 ip nat inside
 ip virtual-reassembly
 duplex auto
 speed auto
 media-type rj45
 no negotiation auto
!
interface GigabitEthernet0/2
 ip address 158.100.102.254 255.255.255.0
 ip nat outside
 ip virtual-reassembly
 duplex auto
 speed 100
 media-type rj45
 no negotiation auto
!
!
!

!--- Apply the crypto map on the interface where !--- traffic leaves the router.

interface GigabitEthernet0/3
 ip address 172.16.186.186 255.255.255.0
 duplex auto
 speed auto
 media-type rj45
 no negotiation auto
 crypto map clientmap
!
interface FastEthernet1/0
 no ip address
 shutdown
 duplex half
!
ip default-gateway 172.16.186.1
ip classless
ip route 0.0.0.0 0.0.0.0 172.16.186.1
no ip http server
no ip http secure-server
!
!
ip nat Stateful id 10
ip nat pool honnat 158.100.96.90 158.100.96.99 netmask 255.255.255.0
ip nat inside source route-map test pool honnat mapping-id 10 overload
!
logging alarm informational
access-list 100 permit ip any any
!
route-map test permit 10
 match ip address 100
!
!
!
!
control-plane
!
!
!
!
!
!
gatekeeper
 shutdown
!
!
line con 0
 logging synchronous
 stopbits 1
line aux 0
 stopbits 1
line vty 0 4
!
!
end

Easy VPN Remote（Cisco 871W 路由器） 
3-03-06-871W#show running-config
Current configuration : 1563 bytes
!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname 3-03-06-871W
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
!
resource policy
!
ip cef
!
!
!
!
ip name-server 171.70.168.183
!
!
username cisco privilege 15 password 7 00071A150754
!
!
!
!

!--- Set the parameters to connect to the !--- appropriate Easy VPN group on the Easy VPN server.

crypto ipsec client ezvpn ez
 connect auto
 group vpngrp key cisco123
 mode network-extension
 peer 172.16.186.186
 xauth userid mode interactive
!
!
!

!--- Define the inside interfaces that will access !--- and can be accessed via Easy VPN.

interface Loopback0
 ip address 10.12.130.1 255.255.255.255
 crypto ipsec client ezvpn ez inside
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3


!--- Use the crypto ipsec client ezvpn 
            command on the !--- interface that connects to the Easy VPN server !--- in order to complete the Easy VPN.


interface FastEthernet4
 ip address 172.16.186.130 255.255.255.0
 duplex auto
 speed auto
 crypto ipsec client ezvpn ez
!
interface Dot11Radio0
 no ip address
 shutdown
 speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
 station-role root
!
interface Vlan1
 no ip address
!
ip default-gateway 172.16.186.1
ip route 0.0.0.0 0.0.0.0 172.16.186.1
!
!
no ip http server
no ip http secure-server
!
access-list 121 dynamic testlist permit tcp any host 12.12.12.12 eq 5900
snmp-server community presto RW
!
!
!
route-map polo permit 10
!
route-map asa permit 10
!
tacacs-server host 66.94.234.13
tacacs-server directed-request
!
control-plane
!
!
line con 0
 no modem enable
line aux 0
line vty 0 4
 login
!
scheduler max-task-time 5000
!
webvpn context Default_context
 ssl authenticate verify all
 !
 no inservice
!
end

验证

使用以下各部分可确认您的配置是否正常运行。

命令输出解释程序（仅限注册用户）(OIT) 支持某些 show 命令。使用 OIT 可查看对 show 命令输出的分析。

Cisco 7200 Easy VPN 服务器 show 命令和示例输出

  • show crypto isakmp sa - 显示对等体上的所有当前 Internet 密钥交换 (IKE) 安全关联 (SA)。 

    3-07-07-7200VXR#show crypto isakmp sa
IPv4 Crypto ISAKMP SA
dst             src             state          conn-id slot status
172.16.186.186  172.16.186.130  QM_IDLE           1008    0 ACTIVE

IPv6 Crypto ISAKMP SA

  • show crypto ipsec sa - 显示对等体之间构建的 IPSec SA。 

    3-07-07-7200VXR#show crypto ipsec sa

interface: GigabitEthernet0/3
    Crypto map tag: clientmap, local addr 172.16.186.186

   protected vrf: (none)
   local  ident (addr/mask/prot/port): (0.0.0.0/0.0.0.0/0/0)
   remote ident (addr/mask/prot/port): (10.12.130.1/255.255.255.255/0/0)
   current_peer 172.16.186.130 port 500
     PERMIT, flags={}
    #pkts encaps: 5, #pkts encrypt: 5, #pkts digest: 5
    #pkts decaps: 5, #pkts decrypt: 5, #pkts verify: 5
    #pkts compressed: 0, #pkts decompressed: 0
    #pkts not compressed: 0, #pkts compr. failed: 0
    #pkts not decompressed: 0, #pkts decompress failed: 0
    #send errors 0, #recv errors 0

     local crypto endpt.: 172.16.186.186, remote crypto endpt.: 172.16.186.130
     path mtu 1500, ip mtu 1500
     current outbound spi: 0x29354010(691355664)

     inbound esp sas:
      spi: 0x6875F644(1752561220)
        transform: esp-3des esp-sha-hmac ,
        in use settings ={Tunnel, }
        conn id: 11, flow_id: SW:11, crypto map: clientmap
        sa timing: remaining key lifetime (k/sec): (4439946/3526)
        IV size: 8 bytes
        replay detection support: Y
        Status: ACTIVE

     inbound ah sas:

     inbound pcp sas:

     outbound esp sas:
      spi: 0x29354010(691355664)
        transform: esp-3des esp-sha-hmac ,
        in use settings ={Tunnel, }
        conn id: 12, flow_id: SW:12, crypto map: clientmap
        sa timing: remaining key lifetime (k/sec): (4439946/3524)
        IV size: 8 bytes
        replay detection support: Y
        Status: ACTIVE

Cisco 871W Easy VPN Remote show 命令和示例输出

  • show crypto isakmp sa - 显示对等体上的所有当前 IKE SA。 

    3-03-06-871W#show crypto isakmp sa
IPv4 Crypto ISAKMP SA
dst             src             state          conn-id slot status
172.16.186.186  172.16.186.130  QM_IDLE           2003    0 ACTIVE

IPv6 Crypto ISAKMP SA

  • show crypto ipsec sa - 显示对等体之间构建的 IPSec SA。 

    3-03-06-871W#show crypto ipsec sa
interface: FastEthernet4
    Crypto map tag: FastEthernet4-head-0, local addr 172.16.186.130

   protected vrf: (none)
   local  ident (addr/mask/prot/port): (10.12.130.1/255.255.255.255/0/0)
   remote ident (addr/mask/prot/port): (0.0.0.0/0.0.0.0/0/0)
   current_peer 172.16.186.186 port 500
     PERMIT, flags={origin_is_acl,}
    #pkts encaps: 5, #pkts encrypt: 5, #pkts digest: 5
    #pkts decaps: 5, #pkts decrypt: 5, #pkts verify: 5
    #pkts compressed: 0, #pkts decompressed: 0
    #pkts not compressed: 0, #pkts compr. failed: 0
    #pkts not decompressed: 0, #pkts decompress failed: 0
    #send errors 0, #recv errors 0

     local crypto endpt.: 172.16.186.130, remote crypto endpt.: 172.16.186.186
     path mtu 1500, ip mtu 1500
     current outbound spi: 0x6875F644(1752561220)

     inbound esp sas:
      spi: 0x29354010(691355664)
        transform: esp-3des esp-sha-hmac ,
        in use settings ={Tunnel, }
        conn id: 11, flow_id: Motorola SEC 1.0:11, crypto map: FastEthernet4-head-0
        sa timing: remaining key lifetime (k/sec): (4607687/3531)
        IV size: 8 bytes
        replay detection support: Y
        Status: ACTIVE

     inbound ah sas:

     inbound pcp sas:

     outbound esp sas:
      spi: 0x6875F644(1752561220)
        transform: esp-3des esp-sha-hmac ,
        in use settings ={Tunnel, }
        conn id: 12, flow_id: Motorola SEC 1.0:12, crypto map: FastEthernet4-head-0
        sa timing: remaining key lifetime (k/sec): (4607687/3528)
        IV size: 8 bytes
        replay detection support: Y
        Status: ACTIVE

     outbound ah sas:

     outbound pcp sas:

  • show crypto ipsec client ezvpn - 显示 Cisco Easy VPN Remote 配置。 

    3-03-06-871W#show crypto ipsec client ezvpn
Easy VPN Remote Phase: 6

Tunnel name : ez
Inside interface list: Loopback0
Outside interface: FastEthernet4
Current State: IPSEC_ACTIVE
Last Event: SOCKET_UP
Save Password: Disallowed
Current EzVPN Peer: 172.16.186.186

3-03-06-871W#ping 10.10.10.1 source 10.12.130.1

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.10.10.1, timeout is 2 seconds:
Packet sent with a source address of 10.12.130.1
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms

故障排除

使用本部分可排除配置故障。

命令输出解释程序（仅限注册用户）(OIT) 支持某些 show 命令。使用 OIT 可查看对 show 命令输出的分析。

注意：使用debug命令之前，请参阅有关Debug命令的重要信息。

如果已根据本文档所述内容设置了 Easy VPN Remote 和 Easy VPN 服务器，但是仍然遇到问题，请收集每个设备的 debug 输出和 show 命令的输出，以供 Cisco 技术支持部门进行分析。

以下部分显示了 debug 命令和示例输出：

Easy VPN 服务器命令

  • debug crypto ipsec - 显示第 2 阶段的 IPsec 协商。

  • debug crypto isakmp - 显示第 1 阶段的 ISAKMP 协商。 

3-07-07-7200VXR#debug crypto ipsec
3-07-07-7200VXR#debug crypto isakmp
*May  4 00:44:19.389: IPSEC(key_engine): got a queue event with 1 KMI message(s)
*May  4 00:44:20.937: ISAKMP (0:0): received packet from 172.16.186.130 dport 
                      500 sport 500 Global (N) NEW SA
*May  4 00:44:20.937: ISAKMP: Created a peer struct for 172.16.186.130, peer port 500
*May  4 00:44:20.937: ISAKMP: New peer created peer = 0x6745B8E0 
                      peer_handle = 0x80000009
*May  4 00:44:20.937: ISAKMP: Locking peer struct 0x6745B8E0, refcount 1 
                      for crypto_isakmp_process_block
*May  4 00:44:20.937: ISAKMP:(0):Setting client config settings 6741FF98
*May  4 00:44:20.937: ISAKMP:(0):(Re)Setting client xauth list  and state
*May  4 00:44:20.937: ISAKMP/xauth: initializing AAA request
*May  4 00:44:20.937: ISAKMP: local port 500, remote port 500
*May  4 00:44:20.937: ISAKMP: Find a dup sa in the avl tree during 
                      calling isadb_insert sa = 67369734
*May  4 00:44:20.937: ISAKMP:(0): processing SA payload. message ID = 0
*May  4 00:44:20.937: ISAKMP:(0): processing ID payload. message ID = 0
*May  4 00:44:20.937: ISAKMP (0:0): ID payload
        next-payload : 13
        type         : 11
        group id     : vpngrp
        protocol     : 17
        port         : 0
        length       : 14
*May  4 00:44:20.937: ISAKMP:(0):: peer matches *none* of the profiles
*May  4 00:44:20.937: ISAKMP:(0): processing vendor id payload
*May  4 00:44:20.937: ISAKMP:(0): vendor ID seems Unity/DPD but major 245 mismatch
*May  4 00:44:20.937: ISAKMP (0:0): vendor ID is NAT-T v7
*May  4 00:44:20.937: ISAKMP:(0): processing vendor id payload
*May  4 00:44:20.937: ISAKMP:(0): vendor ID seems Unity/DPD but major 157 mismatch
*May  4 00:44:20.937: ISAKMP:(0): vendor ID is NAT-T v3
*May  4 00:44:20.937: ISAKMP:(0): processing vendor id payload
*May  4 00:44:20.937: ISAKMP:(0): vendor ID seems Unity/DPD but major 123 mismatch
*May  4 00:44:20.937: ISAKMP:(0): vendor ID is NAT-T v2
*May  4 00:44:20.937: ISAKMP:(0): Authentication by xauth preshared
*May  4 00:44:20.937: ISAKMP:(0):Checking ISAKMP transform 1 against priority 3 policy
*May  4 00:44:20.937: ISAKMP:      encryption AES-CBC
*May  4 00:44:20.937: ISAKMP:      keylength of 128
*May  4 00:44:20.937: ISAKMP:      hash SHA
*May  4 00:44:20.937: ISAKMP:      default group 2
*May  4 00:44:20.937: ISAKMP:      auth XAUTHInitPreShared
*May  4 00:44:20.937: ISAKMP:      life type in seconds
*May  4 00:44:20.937: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*May  4 00:44:20.937: ISAKMP:(0):Encryption algorithm offered does not match policy!
*May  4 00:44:20.937: ISAKMP:(0):atts are not acceptable. Next payload is 3
*May  4 00:44:20.937: ISAKMP:(0):Checking ISAKMP transform 2 against priority 3 policy
*May  4 00:44:20.937: ISAKMP:      encryption AES-CBC
*May  4 00:44:20.937: ISAKMP:      keylength of 128
*May  4 00:44:20.937: ISAKMP:      hash MD5
*May  4 00:44:20.937: ISAKMP:      default group 2
*May  4 00:44:20.937: ISAKMP:      auth XAUTHInitPreShared
*May  4 00:44:20.937: ISAKMP:      life type in seconds
*May  4 00:44:20.937: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*May  4 00:44:20.937: ISAKMP:(0):Encryption algorithm offered does not match policy!
*May  4 00:44:20.937: ISAKMP:(0):atts are not acceptable. Next payload is 3
*May  4 00:44:20.937: ISAKMP:(0):Checking ISAKMP transform 3 against priority 3 policy
*May  4 00:44:20.937: ISAKMP:      encryption AES-CBC
*May  4 00:44:20.937: ISAKMP:      keylength of 192
*May  4 00:44:20.937: ISAKMP:      hash SHA
*May  4 00:44:20.937: ISAKMP:      default group 2
*May  4 00:44:20.937: ISAKMP:      auth XAUTHInitPreShared
*May  4 00:44:20.937: ISAKMP:      life type in seconds
*May  4 00:44:20.937: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*May  4 00:44:20.937: ISAKMP:(0):Encryption algorithm offered does not match policy!
*May  4 00:44:20.937: ISAKMP:(0):atts are not acceptable. Next payload is 3
*May  4 00:44:20.937: ISAKMP:(0):Checking ISAKMP transform 4 against priority 3 policy
*May  4 00:44:20.937: ISAKMP:      encryption AES-CBC
*May  4 00:44:20.937: ISAKMP:      keylength of 192
*May  4 00:44:20.937: ISAKMP:      hash MD5
*May  4 00:44:20.937: ISAKMP:      default group 2
*May  4 00:44:20.937: ISAKMP:      auth XAUTHInitPreShared
*May  4 00:44:20.937: ISAKMP:      life type in seconds
*May  4 00:44:20.937: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*May  4 00:44:20.937: ISAKMP:(0):Encryption algorithm offered does not match policy!
*May  4 00:44:20.937: ISAKMP:(0):atts are not acceptable. Next payload is 3
*May  4 00:44:20.937: ISAKMP:(0):Checking ISAKMP transform 5 against priority 3 policy
*May  4 00:44:20.937: ISAKMP:      encryption AES-CBC
*May  4 00:44:20.937: ISAKMP:      keylength of 256
*May  4 00:44:20.937: ISAKMP:      hash SHA
*May  4 00:44:20.937: ISAKMP:      default group 2
*May  4 00:44:20.937: ISAKMP:      auth XAUTHInitPreShared
*May  4 00:44:20.937: ISAKMP:      life type in seconds
*May  4 00:44:20.937: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*May  4 00:44:20.937: ISAKMP:(0):Encryption algorithm offered does not match policy!
*May  4 00:44:20.937: ISAKMP:(0):atts are not acceptable. Next payload is 3
*May  4 00:44:20.937: ISAKMP:(0):Checking ISAKMP transform 6 against priority 3 policy
*May  4 00:44:20.937: ISAKMP:      encryption AES-CBC
*May  4 00:44:20.937: ISAKMP:      keylength of 256
*May  4 00:44:20.941: ISAKMP:      hash MD5
*May  4 00:44:20.941: ISAKMP:      default group 2
*May  4 00:44:20.941: ISAKMP:      auth XAUTHInitPreShared
*May  4 00:44:20.941: ISAKMP:      life type in seconds
*May  4 00:44:20.941: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*May  4 00:44:20.941: ISAKMP:(0):Encryption algorithm offered does not match policy!
*May  4 00:44:20.941: ISAKMP:(0):atts are not acceptable. Next payload is 3
*May  4 00:44:20.941: ISAKMP:(0):Checking ISAKMP transform 7 against priority 3 policy
*May  4 00:44:20.941: ISAKMP:      encryption AES-CBC
*May  4 00:44:20.941: ISAKMP:      keylength of 128
*May  4 00:44:20.941: ISAKMP:      hash SHA
*May  4 00:44:20.941: ISAKMP:      default group 2
*May  4 00:44:20.941: ISAKMP:      auth pre-share
*May  4 00:44:20.941: ISAKMP:      life type in seconds
*May  4 00:44:20.941: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*May  4 00:44:20.941: ISAKMP:(0):Encryption algorithm offered does not match policy!
*May  4 00:44:20.941: ISAKMP:(0):atts are not acceptable. Next payload is 3
*May  4 00:44:20.941: ISAKMP:(0):Checking ISAKMP transform 8 against priority 3 policy
*May  4 00:44:20.941: ISAKMP:      encryption AES-CBC
*May  4 00:44:20.941: ISAKMP:      keylength of 128
*May  4 00:44:20.941: ISAKMP:      hash MD5
*May  4 00:44:20.941: ISAKMP:      default group 2
*May  4 00:44:20.941: ISAKMP:      auth pre-share
*May  4 00:44:20.941: ISAKMP:      life type in seconds
*May  4 00:44:20.941: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*May  4 00:44:20.941: ISAKMP:(0):Encryption algorithm offered does not match policy!
*May  4 00:44:20.941: ISAKMP:(0):atts are not acceptable. Next payload is 3
*May  4 00:44:20.941: ISAKMP:(0):Checking ISAKMP transform 9 against priority 3 policy
*May  4 00:44:20.941: ISAKMP:      encryption AES-CBC
*May  4 00:44:20.941: ISAKMP:      keylength of 192
*May  4 00:44:20.941: ISAKMP:      hash SHA
*May  4 00:44:20.941: ISAKMP:      default group 2
*May  4 00:44:20.941: ISAKMP:      auth pre-share
*May  4 00:44:20.941: ISAKMP:      life type in seconds
*May  4 00:44:20.941: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*May  4 00:44:20.941: ISAKMP:(0):Encryption algorithm offered does not match policy!
*May  4 00:44:20.941: ISAKMP:(0):atts are not acceptable. Next payload is 3
*May  4 00:44:20.941: ISAKMP:(0):Checking ISAKMP transform 10 against priority 3 policy
*May  4 00:44:20.941: ISAKMP:      encryption AES-CBC
*May  4 00:44:20.941: ISAKMP:      keylength of 192
*May  4 00:44:20.941: ISAKMP:      hash MD5
*May  4 00:44:20.941: ISAKMP:      default group 2
*May  4 00:44:20.941: ISAKMP:      auth pre-share
*May  4 00:44:20.941: ISAKMP:      life type in seconds
*May  4 00:44:20.941: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*May  4 00:44:20.941: ISAKMP:(0):Encryption algorithm offered does not match policy!
*May  4 00:44:20.941: ISAKMP:(0):atts are not acceptable. Next payload is 3
*May  4 00:44:20.941: ISAKMP:(0):Checking ISAKMP transform 11 against priority 3 policy
*May  4 00:44:20.941: ISAKMP:      encryption AES-CBC
*May  4 00:44:20.941: ISAKMP:      keylength of 256
*May  4 00:44:20.941: ISAKMP:      hash SHA
*May  4 00:44:20.941: ISAKMP:      default group 2
*May  4 00:44:20.941: ISAKMP:      auth pre-share
*May  4 00:44:20.941: ISAKMP:      life type in seconds
*May  4 00:44:20.941: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*May  4 00:44:20.941: ISAKMP:(0):Encryption algorithm offered does not match policy!
*May  4 00:44:20.941: ISAKMP:(0):atts are not acceptable. Next payload is 3
*May  4 00:44:20.941: ISAKMP:(0):Checking ISAKMP transform 12 against priority 3 policy
*May  4 00:44:20.941: ISAKMP:      encryption AES-CBC
*May  4 00:44:20.941: ISAKMP:      keylength of 256
*May  4 00:44:20.941: ISAKMP:      hash MD5
*May  4 00:44:20.941: ISAKMP:      default group 2
*May  4 00:44:20.941: ISAKMP:      auth pre-share
*May  4 00:44:20.941: ISAKMP:      life type in seconds
*May  4 00:44:20.941: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*May  4 00:44:20.941: ISAKMP:(0):Encryption algorithm offered does not match policy!
*May  4 00:44:20.941: ISAKMP:(0):atts are not acceptable. Next payload is 3
*May  4 00:44:20.941: ISAKMP:(0):Checking ISAKMP transform 13 against priority 3 policy
*May  4 00:44:20.941: ISAKMP:      encryption 3DES-CBC
*May  4 00:44:20.941: ISAKMP:      hash SHA
*May  4 00:44:20.941: ISAKMP:      default group 2
*May  4 00:44:20.941: ISAKMP:      auth XAUTHInitPreShared
*May  4 00:44:20.941: ISAKMP:      life type in seconds
*May  4 00:44:20.941: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*May  4 00:44:20.941: ISAKMP:(0):atts are acceptable. Next payload is 3
*May  4 00:44:20.941: ISAKMP:(0): processing vendor id payload
*May  4 00:44:20.941: ISAKMP:(0): vendor ID seems Unity/DPD but major 245 mismatch
*May  4 00:44:20.941: ISAKMP (0:0): vendor ID is NAT-T v7
*May  4 00:44:20.941: ISAKMP:(0): processing vendor id payload
*May  4 00:44:20.941: ISAKMP:(0): vendor ID seems Unity/DPD but major 157 mismatch
*May  4 00:44:20.941: ISAKMP:(0): vendor ID is NAT-T v3
*May  4 00:44:20.941: ISAKMP:(0): processing vendor id payload
*May  4 00:44:20.941: ISAKMP:(0): vendor ID seems Unity/DPD but major 123 mismatch
*May  4 00:44:20.941: ISAKMP:(0): vendor ID is NAT-T v2
*May  4 00:44:20.941: ISAKMP:(0): processing KE payload. message ID = 0
*May  4 00:44:20.957: ISAKMP:(0): processing NONCE payload. message ID = 0
*May  4 00:44:20.957: ISAKMP:(0): processing vendor id payload
*May  4 00:44:20.957: ISAKMP:(0): vendor ID is DPD
*May  4 00:44:20.957: ISAKMP:(0): processing vendor id payload
*May  4 00:44:20.957: ISAKMP:(0): vendor ID seems Unity/DPD but major 79 mismatch
*May  4 00:44:20.957: ISAKMP:(0): vendor ID is XAUTH
*May  4 00:44:20.957: ISAKMP:(0): processing vendor id payload
*May  4 00:44:20.957: ISAKMP:(0): claimed IOS but failed authentication
*May  4 00:44:20.957: ISAKMP:(0): processing vendor id payload
*May  4 00:44:20.957: ISAKMP:(0): vendor ID is Unity
*May  4 00:44:20.957: ISAKMP:(0):Input = IKE_MESG_FROM_PEER, IKE_AM_EXCH
*May  4 00:44:20.957: ISAKMP:(0):Old State = IKE_READY  New State = IKE_R_AM_AAA_AWAIT

*May  4 00:44:20.957: ISAKMP:(1008): constructed NAT-T vendor-07 ID
*May  4 00:44:20.957: ISAKMP:(1008):SA is doing pre-shared key authentication 
                      plus XAUTH using id type ID_IPV4_ADDR
*May  4 00:44:20.957: ISAKMP (0:1008): ID payload
        next-payload : 10
        type         : 1
        address      : 172.16.186.186
        protocol     : 17
        port         : 0
        length       : 12
*May  4 00:44:20.957: ISAKMP:(1008):Total payload length: 12
*May  4 00:44:20.957: ISAKMP:(1008): sending packet to 172.16.186.130 my_port 
                      500 peer_port 500 (R) AG_INIT_EXCH
*May  4 00:44:20.957: ISAKMP:(1008):Input = IKE_MESG_FROM_AAA, PRESHARED_KEY_REPLY
*May  4 00:44:20.957: ISAKMP:(1008):Old State = IKE_R_AM_AAA_AWAIT  New State = IKE_R_AM2

*May  4 00:44:20.985: ISAKMP (0:1008): received packet from 172.16.186.130 dport 
                      500 sport 500 Global (R) AG_INIT_EXCH
*May  4 00:44:20.985: ISAKMP:(1008): processing HASH payload. message ID = 0
*May  4 00:44:20.985: ISAKMP:(1008): processing NOTIFY INITIAL_CONTACT protocol 1
        spi 0, message ID = 0, sa = 67369734
*May  4 00:44:20.985: ISAKMP:(1008):SA authentication status:
        authenticated
*May  4 00:44:20.985: ISAKMP:(1008):SA has been authenticated with 172.16.186.130
*May  4 00:44:20.985: ISAKMP:(1008):SA authentication status:
        authenticated
*May  4 00:44:20.985: ISAKMP:(1008): Process initial contact,
bring down existing phase 1 and 2 SA's with local 172.16.186.186 remote 172.16.186.130 
          remote port 500
*May  4 00:44:20.985: ISAKMP:(1008):returning IP addr to the address pool
*May  4 00:44:20.985: ISAKMP: Trying to insert a peer 172.16.186.186/172.16.186.130/500/, 
                      and inserted successfully 6745B8E0.
*May  4 00:44:20.985: ISAKMP: set new node 1361385973 to CONF_XAUTH
*May  4 00:44:20.985: ISAKMP:(1008):Sending NOTIFY RESPONDER_LIFETIME protocol 1
        spi 1722618680, message ID = 1361385973
*May  4 00:44:20.985: ISAKMP:(1008): sending packet to 172.16.186.130 my_port 500 
                      peer_port 500 (R) QM_IDLE
*May  4 00:44:20.985: ISAKMP:(1008):purging node 1361385973
*May  4 00:44:20.985: ISAKMP: Sending phase 1 responder lifetime 86400

*May  4 00:44:20.985: ISAKMP:(1008):Input = IKE_MESG_FROM_PEER, IKE_AM_EXCH
*May  4 00:44:20.985: ISAKMP:(1008):Old State = IKE_R_AM2  New State = IKE_P1_COMPLETE

!--- Requesting Xauth.


*May  4 00:44:20.985: IPSEC(key_engine): got a queue event with 1 KMI message(s)
*May  4 00:44:20.985: ISAKMP:(1008):Need XAUTH
*May  4 00:44:20.985: ISAKMP: set new node -605466681 to CONF_XAUTH
*May  4 00:44:20.985: ISAKMP/xauth: request attribute XAUTH_USER_NAME_V2
*May  4 00:44:20.985: ISAKMP/xauth: request attribute XAUTH_USER_PASSWORD_V2
*May  4 00:44:20.985: ISAKMP:(1008): initiating peer config to 172.16.186.130. 
                       ID = -605466681
*May  4 00:44:20.985: ISAKMP:(1008): sending packet to 172.16.186.130 my_port 
                      500 peer_port 500 (R) CONF_XAUTH
*May  4 00:44:20.985: ISAKMP:(1008):Input = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE
*May  4 00:44:20.985: ISAKMP:(1008):Old State = IKE_P1_COMPLETE  New State = 
                      IKE_XAUTH_REQ_SENT


*May  4 00:44:35.985: ISAKMP:(1008): retransmitting phase 2 CONF_XAUTH    -605466681 ...
*May  4 00:44:35.985: ISAKMP (0:1008): incrementing error counter on node, 
                       attempt 1 of 5: retransmit phase 2
*May  4 00:44:35.985: ISAKMP (0:1008): incrementing error counter on sa, 
                       attempt 1 of 5: retransmit phase 2
*May  4 00:44:35.985: ISAKMP:(1008): retransmitting phase 2 -605466681 CONF_XAUTH
*May  4 00:44:35.985: ISAKMP:(1008): sending packet to 172.16.186.130 
                       my_port 500 peer_port 500 (R) CONF_XAUTH   R#
3-07-07-7200VXR#
*May  4 00:44:50.985: ISAKMP:(1008): retransmitting phase 2 CONF_XAUTH    -605466681 ...
*May  4 00:44:50.985: ISAKMP (0:1008): incrementing error counter on node, 
                      attempt 2 of 5: retransmit phase 2
*May  4 00:44:50.985: ISAKMP (0:1008): incrementing error counter on sa, 
                      attempt 2 of 5: retransmit phase 2
*May  4 00:44:50.985: ISAKMP:(1008): retransmitting phase 2 -605466681 CONF_XAUTH
*May  4 00:44:50.985: ISAKMP:(1008): sending packet to 172.16.186.130 
                      my_port 500 peer_port 500 (R) CONF_XAUTH
3-07-07-7200VXR#
*May  4 00:45:01.997: ISAKMP (0:1008): received packet from 172.16.186.130 
                      dport 500 sport 500 Global (R) CONF_XAUTH
*May  4 00:45:01.997: ISAKMP:(1008):processing transaction payload from 
                      172.16.186.130. message ID = -605466681
*May  4 00:45:01.997: ISAKMP: Config payload REPLY
*May  4 00:45:01.997: ISAKMP/xauth: reply attribute XAUTH_USER_NAME_V2
*May  4 00:45:01.997: ISAKMP/xauth: reply attribute XAUTH_USER_PASSWORD_V2
*May  4 00:45:01.997: ISAKMP:(1008):deleting node -605466681 error FALSE 
                       reason "Done with xauth request/reply exchange"
*May  4 00:45:01.997: ISAKMP:(1008):Input = IKE_MESG_FROM_PEER, IKE_CFG_REPLY
*May  4 00:45:01.997: ISAKMP:(1008):Old State = IKE_XAUTH_REQ_SENT  
                      New State = IKE_XAUTH_AAA_CONT_LOGIN_AWAIT

*May  4 00:45:01.997: ISAKMP: set new node 1283697340 to CONF_XAUTH
*May  4 00:45:01.997: ISAKMP:(1008): initiating peer config to 172.16.186.130. 
                       ID = 1283697340
*May  4 00:45:01.997: ISAKMP:(1008): sending packet to 172.16.186.130 my_port 5
3-07-07-7200VX00 peer_port 500 (R) CONF_XAUTH
*May  4 00:45:01.997: ISAKMP:(1008):Input = IKE_MESG_FROM_AAA, IKE_AAA_CONT_LOGIN
*May  4 00:45:01.997: ISAKMP:(1008):Old State = IKE_XAUTH_AAA_CONT_LOGIN_AWAIT  
                      New State = IKE_XAUTH_SET_SENT

*May  4 00:45:02.005: ISAKMP (0:1008): received packet from 172.16.186.130 
                       dport 500 sport 500 Global (R) CONF_XAUTH
*May  4 00:45:02.005: ISAKMP:(1008):processing transaction payload from 172.16.186.130. 
                       message ID = 1283697340
*May  4 00:45:02.005: ISAKMP: Config payload ACK
*May  4 00:45:02.005: ISAKMP:(1008):       XAUTH ACK Processed
*May  4 00:45:02.005: ISAKMP:(1008):deleting node 1283697340 error FALSE reason 
                      "Transaction mode done"
*May  4 00:45:02.005: ISAKMP:(1008):Input = IKE_MESG_FROM_PEER, IKE_CFG_ACK
*May  4 00:45:02.005: ISAKMP:(1008):Old State = IKE_XAUTH_SET_SENT  New State = 
                      IKE_P1_COMPLETE

*May  4 00:45:02.005: ISAKMP:(1008):Input = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE
*May  4 00:45:02.005: ISAKMP:(1008):Old State = IKE_P1_COMPLETE  New State = 
                       IKE_P1_COMPLETE

*May  4 00:45:02.005: ISAKMP (0:1008): received packet from 172.16.186.130 
                      dport 500 sport 500 Global (R) QM_IDLE
*May  4 00:45:02.005: ISAKMP: set new node 104696831 to QM_IDLE
*May  4 00:45:02.005: ISAKMP:(1008):processing transaction payload from 
                      172.16.186.130. message ID = 104696831
*May  4 00:45:02.005: ISAKMP: Config payload REQUEST
*May  4 00:45:02.005: ISAKMP:(1008):checking request:
*May  4 00:45:02.005: ISAKMP:    MODECFG_CONFIG_URL
*May  4 00:45:02.005: ISAKMP:    MODECFG_CONFIG_VERSION
*May  4 00:45:02.009: ISAKMP:    IP4_DNS
*May  4 00:45:02.009: ISAKMP:    IP4_DNS
*May  4 00:45:02.009: ISAKMP:    IP4_NBNS
*May  4 00:45:02.009: ISAKMP:    IP4_NBNS
*May  4 00:45:02.009: ISAKMP:    SPLIT_INCLUDE
*May  4 00:45:02.009: ISAKMP:    SPLIT_DNS
*May  4 00:45:02.009: ISAKMP:    DEFAULT_DOMAIN
*May  4 00:45:02.009: ISAKMP:    MODECFG_SAVEPWD
*May  4 00:45:02.009: ISAKMP:    INCLUDE_LOCAL_LAN
*May  4 00:45:02.009: ISAKMP:    PFS
*May  4 00:45:02.009: ISAKMP:    BACKUP_SERVER
*May  4 00:45:02.009: ISAKMP:    APPLICATION_VERSION
*May  4 00:45:02.009: ISAKMP:    MODECFG-BANNER
*May  4 00:45:02.009: ISAKMP:    MODECFG_IPSEC_INT_CONF
*May  4 00:45:02.009: ISAKMP/author: Author request for group vpngrpsuccessfully 
                      sent to AAA
*May  4 00:45:02.009: ISAKMP:(1008):Input = IKE_MESG_FROM_PEER, IKE_CFG_REQUEST
*May  4 00:45:02.009: ISAKMP:(1008):Old State = IKE_P1_COMPLETE  New State = 
                       IKE_CONFIG_AUTHOR_AAA_AWAIT

*May  4 00:45:02.009: ISAKMP:(1008):Receive config attributes requested 
                       butconfig attributes not in crypto map.  Sending empty reply.
*May  4 00:45:02.009: ISAKMP:(1008):attributes sent in message:
*May  4 00:45:02.009: ISAKMP: Sending APPLICATION_VERSION string: Cisco 
                      IOS Software, 7200 Software (C7200-ADVENTERPRISEK9-M),
                      Version 12.4(4)T1, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Wed 21-Dec-05 22:58 by ccai
*May  4 00:45:02.009: ISAKMP: Sending IPsec Interface Config reply value 0
*May  4 00:45:02.009: ISAKMP:(1008): responding to peer config from 172.16.186.130. 
                      ID = 104696831
*May  4 00:45:02.009: ISAKMP:(1008): sending packet to 172.16.186.130 my_port 
                       500 peer_port 500 (R) CONF_ADDR
*May  4 00:45:02.009: ISAKMP:(1008):deleting node 104696831 error FALSE reason 
                      "No Error"
*May  4 00:45:02.009: ISAKMP:(1008):Input = IKE_MESG_FROM_AAA, IKE_AAA_GROUP_ATTR
*May  4 00:45:02.009: ISAKMP:(1008):Old State = IKE_CONFIG_AUTHOR_AAA_AWAIT  
                      New State = IKE_P1_COMPLETE

*May  4 00:45:02.009: ISAKMP:(1008):Input = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE
*May  4 00:45:02.009: ISAKMP:(1008):Old State = IKE_P1_COMPLETE  New State = 
                      IKE_P1_COMPLETE

*May  4 00:45:02.029: ISAKMP (0:1008): received packet from 172.16.186.130 
                      dport 500 sport 500 Global (R) QM_IDLE
*May  4 00:45:02.029: ISAKMP: set new node -1665883002 to QM_IDLE
*May  4 00:45:02.029: ISAKMP:(1008): processing HASH payload. message ID = -1665883002
*May  4 00:45:02.029: ISAKMP:(1008): processing SA payload. message ID = -1665883002
*May  4 00:45:02.029: ISAKMP:(1008):Checking IPSec proposal 1
*May  4 00:45:02.029: ISAKMP: transform 1, ESP_AES
*May  4 00:45:02.029: ISAKMP:   attributes in transform:
*May  4 00:45:02.029: ISAKMP:      encaps is 1 (Tunnel)
*May  4 00:45:02.029: ISAKMP:      SA life type in seconds
*May  4 00:45:02.029: ISAKMP:      SA life duration (VPI) of  0x0 0x20 0xC4 0x9B
*May  4 00:45:02.029: ISAKMP:      SA life type in kilobytes
*May  4 00:45:02.029: ISAKMP:      SA life duration (VPI) of  0x0 0x46 0x50 0x0
*May  4 00:45:02.029: ISAKMP:      authenticator is HMAC-SHA
*May  4 00:45:02.029: ISAKMP:      key length is 128
*May  4 00:45:02.029: ISAKMP:(1008):atts are acceptable.
*May  4 00:45:02.029: IPSEC(validate_proposal_request): proposal part #1
*May  4 00:45:02.029: IPSEC(validate_proposal_request): proposal part #1,
  (key eng. msg.) INBOUND local= 172.16.186.186, remote= 172.16.186.130,
    local_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4),
    remote_proxy= 10.12.130.1/255.255.255.255/0/0 (type=1),
    protocol= ESP, transform= esp-aes esp-sha-hmac  (Tunnel),
    lifedur= 0s and 0kb,
    spi= 0x0(0), conn_id= 0, keysize= 128, flags= 0x0
*May  4 00:45:02.029: IPSEC(crypto_ipsec_process_proposal): transform proposal 
                      not supported for identity:
    {esp-aes esp-sha-hmac }
*May  4 00:45:02.029: ISAKMP:(1008): IPSec policy invalidated proposal
*May  4 00:45:02.029: ISAKMP:(1008):Checking IPSec proposal 2
*May  4 00:45:02.029: ISAKMP: transform 1, ESP_AES
*May  4 00:45:02.029: ISAKMP:   attributes in transform:
*May  4 00:45:02.029: ISAKMP:      encaps is 1 (Tunnel)
*May  4 00:45:02.029: ISAKMP:      SA life type in seconds
*May  4 00:45:02.029: ISAKMP:      SA life duration (VPI) of  0x0 0x20 0xC4 0x9B
*May  4 00:45:02.029: ISAKMP:      SA life type in kilobytes
*May  4 00:45:02.029: ISAKMP:      SA life duration (VPI) of  0x0 0x46 0x50 0x0
*May  4 00:45:02.029: ISAKMP:      authenticator is HMAC-MD5
*May  4 00:45:02.029: ISAKMP:      key length is 128
*May  4 00:45:02.029: ISAKMP:(1008):atts are acceptable.
*May  4 00:45:02.029: IPSEC(validate_proposal_request): proposal part #1
*May  4 00:45:02.029: IPSEC(validate_proposal_request): proposal part #1,
  (key eng. msg.) INBOUND local= 172.16.186.186, remote= 172.16.186.130,
    local_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4),
    remote_proxy= 10.12.130.1/255.255.255.255/0/0 (type=1),
    protocol= ESP, transform= esp-aes esp-md5-hmac  (Tunnel),
    lifedur= 0s and 0kb,
    spi= 0x0(0), conn_id= 0, keysize= 128, flags= 0x0
*May  4 00:45:02.029: IPSEC(crypto_ipsec_process_proposal): transform 
                      proposal not supported for identity:
    {esp-aes esp-md5-hmac }
*May  4 00:45:02.029: ISAKMP:(1008): IPSec policy invalidated proposal
*May  4 00:45:02.029: ISAKMP:(1008):Checking IPSec proposal 3
*May  4 00:45:02.029: ISAKMP: transform 1, ESP_AES
*May  4 00:45:02.029: ISAKMP:   attributes in transform:
*May  4 00:45:02.029: ISAKMP:      encaps is 1 (Tunnel)
*May  4 00:45:02.029: ISAKMP:      SA life type in seconds
*May  4 00:45:02.029: ISAKMP:      SA life duration (VPI) of  0x0 0x20 0xC4 0x9B
*May  4 00:45:02.029: ISAKMP:      SA life type in kilobytes
*May  4 00:45:02.029: ISAKMP:      SA life duration (VPI) of  0x0 0x46 0x50 0x0
*May  4 00:45:02.029: ISAKMP:      authenticator is HMAC-SHA
*May  4 00:45:02.029: ISAKMP:      key length is 192
*May  4 00:45:02.029: ISAKMP:(1008):atts are acceptable.
*May  4 00:45:02.029: IPSEC(validate_proposal_request): proposal part #1
*May  4 00:45:02.029: IPSEC(validate_proposal_request): proposal part #1,
  (key eng. msg.) INBOUND local= 172.16.186.186, remote= 172.16.186.130,
    local_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4),
    remote_proxy= 10.12.130.1/255.255.255.255/0/0 (type=1),
    protocol= ESP, transform= esp-aes 192 esp-sha-hmac  (Tunnel),
    lifedur= 0s and 0kb,
    spi= 0x0(0), conn_id= 0, keysize= 192, flags= 0x0
*May  4 00:45:02.029: IPSEC(crypto_ipsec_process_proposal): transform proposal 
                   not supported for identity:
    {esp-aes 192 esp-sha-hmac }
*May  4 00:45:02.029: ISAKMP:(1008): IPSec policy invalidated proposal
*May  4 00:45:02.029: ISAKMP:(1008):Checking IPSec proposal 4
*May  4 00:45:02.029: ISAKMP: transform 1, ESP_AES
*May  4 00:45:02.029: ISAKMP:   attributes in transform:
*May  4 00:45:02.029: ISAKMP:      encaps is 1 (Tunnel)
*May  4 00:45:02.029: ISAKMP:      SA life type in seconds
*May  4 00:45:02.029: ISAKMP:      SA life duration (VPI) of  0x0 0x20 0xC4 0x9B
*May  4 00:45:02.029: ISAKMP:      SA life type in kilobytes
*May  4 00:45:02.029: ISAKMP:      SA life duration (VPI) of  0x0 0x46 0x50 0x0
*May  4 00:45:02.029: ISAKMP:      authenticator is HMAC-MD5
*May  4 00:45:02.029: ISAKMP:      key length is 192
*May  4 00:45:02.029: ISAKMP:(1008):atts are acceptable.
*May  4 00:45:02.029: IPSEC(validate_proposal_request): proposal part #1
*May  4 00:45:02.029: IPSEC(validate_proposal_request): proposal part #1,
  (key eng. msg.) INBOUND local= 172.16.186.186, remote= 172.16.186.130,
    local_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4),
    remote_proxy= 10.12.130.1/255.255.255.255/0/0 (type=1),
    protocol= ESP, transform= esp-aes 192 esp-md5-hmac  (Tunnel),
    lifedur= 0s and 0kb,
    spi= 0x0(0), conn_id= 0, keysize= 192, flags= 0x0
*May  4 00:45:02.029: IPSEC(crypto_ipsec_process_proposal): transform proposal 
                      not supported for identity:
    {esp-aes 192 esp-md5-hmac }
*May  4 00:45:02.029: ISAKMP:(1008): IPSec policy invalidated proposal
*May  4 00:45:02.029: ISAKMP:(1008):Checking IPSec proposal 5
*May  4 00:45:02.029: ISAKMP: transform 1, ESP_AES
*May  4 00:45:02.029: ISAKMP:   attributes in transform:
*May  4 00:45:02.029: ISAKMP:      encaps is 1 (Tunnel)
*May  4 00:45:02.029: ISAKMP:      SA life type in seconds
*May  4 00:45:02.029: ISAKMP:      SA life duration (VPI) of  0x0 0x20 0xC4 0x9B
*May  4 00:45:02.029: ISAKMP:      SA life type in kilobytes
*May  4 00:45:02.029: ISAKMP:      SA life duration (VPI) of  0x0 0x46 0x50 0x0
*May  4 00:45:02.029: ISAKMP:      authenticator is HMAC-SHA
*May  4 00:45:02.033: ISAKMP:      key length is 256
*May  4 00:45:02.033: ISAKMP:(1008):atts are acceptable.
*May  4 00:45:02.033: IPSEC(validate_proposal_request): proposal part #1
*May  4 00:45:02.033: IPSEC(validate_proposal_request): proposal part #1,
  (key eng. msg.) INBOUND local= 172.16.186.186, remote= 172.16.186.130,
    local_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4),
    remote_proxy= 10.12.130.1/255.255.255.255/0/0 (type=1),
    protocol= ESP, transform= esp-aes 256 esp-sha-hmac  (Tunnel),
    lifedur= 0s and 0kb,
    spi= 0x0(0), conn_id= 0, keysize= 256, flags= 0x0
*May  4 00:45:02.033: IPSEC(crypto_ipsec_process_proposal): transform proposal 
                       not supported for identity:
    {esp-aes 256 esp-sha-hmac }
*May  4 00:45:02.033: ISAKMP:(1008): IPSec policy invalidated proposal
*May  4 00:45:02.033: ISAKMP:(1008):Checking IPSec proposal 6
*May  4 00:45:02.033: ISAKMP: transform 1, ESP_AES
*May  4 00:45:02.033: ISAKMP:   attributes in transform:
*May  4 00:45:02.033: ISAKMP:      encaps is 1 (Tunnel)
*May  4 00:45:02.033: ISAKMP:      SA life type in seconds
*May  4 00:45:02.033: ISAKMP:      SA life duration (VPI) of  0x0 0x20 0xC4 0x9B
*May  4 00:45:02.033: ISAKMP:      SA life type in kilobytes
*May  4 00:45:02.033: ISAKMP:      SA life duration (VPI) of  0x0 0x46 0x50 0x0
*May  4 00:45:02.033: ISAKMP:      authenticator is HMAC-MD5
*May  4 00:45:02.033: ISAKMP:      key length is 256
*May  4 00:45:02.033: ISAKMP:(1008):atts are acceptable.
*May  4 00:45:02.033: IPSEC(validate_proposal_request): proposal part #1
*May  4 00:45:02.033: IPSEC(validate_proposal_request): proposal part #1,
  (key eng. msg.) INBOUND local= 172.16.186.186, remote= 172.16.186.130,
    local_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4),
    remote_proxy= 10.12.130.1/255.255.255.255/0/0 (type=1),
    protocol= ESP, transform= esp-aes 256 esp-md5-hmac  (Tunnel),
    lifedur= 0s and 0kb,
    spi= 0x0(0), conn_id= 0, keysize= 256, flags= 0x0
*May  4 00:45:02.033: IPSEC(crypto_ipsec_process_proposal): transform 
                      proposal not supported for identity:
    {esp-aes 256 esp-md5-hmac }
*May  4 00:45:02.033: ISAKMP:(1008): IPSec policy invalidated proposal
*May  4 00:45:02.033: ISAKMP:(1008):Checking IPSec proposal 7
*May  4 00:45:02.033: ISAKMP: transform 1, ESP_3DES
*May  4 00:45:02.033: ISAKMP:   attributes in transform:
*May  4 00:45:02.033: ISAKMP:      encaps is 1 (Tunnel)
*May  4 00:45:02.033: ISAKMP:      SA life type in seconds
*May  4 00:45:02.033: ISAKMP:      SA life duration (VPI) of  0x0 0x20 0xC4 0x9B
*May  4 00:45:02.033: ISAKMP:      SA life type in kilobytes
*May  4 00:45:02.033: ISAKMP:      SA life duration (VPI) of  0x0 0x46 0x50 0x0
*May  4 00:45:02.033: ISAKMP:      authenticator is HMAC-SHA
*May  4 00:45:02.033: ISAKMP:(1008):atts are acceptable.
*May  4 00:45:02.033: IPSEC(validate_proposal_request): proposal part #1
*May  4 00:45:02.033: IPSEC(validate_proposal_request): proposal part #1,
  (key eng. msg.) INBOUND local= 172.16.186.186, remote= 172.16.186.130,
    local_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4),
    remote_proxy= 10.12.130.1/255.255.255.255/0/0 (type=1),
    protocol= ESP, transform= esp-3des esp-sha-hmac  (Tunnel),
    lifedur= 0s and 0kb,
    spi= 0x0(0), conn_id= 0, keysize= 0, flags= 0x0
*May  4 00:45:02.033: ISAKMP:(1008): processing NONCE payload. message ID = -1665883002
*May  4 00:45:02.033: ISAKMP:(1008): processing ID payload. message ID = -1665883002
*May  4 00:45:02.033: ISAKMP:(1008): processing ID payload. message ID = -1665883002
*May  4 00:45:02.033: ISAKMP:(1008): asking for 1 spis from ipsec
*May  4 00:45:02.033: ISAKMP:(1008):Node -1665883002, Input = IKE_MESG_FROM_PEER, IKE_QM_EXCH
*May  4 00:45:02.033: ISAKMP:(1008):Old State = IKE_QM_READY  New State = IKE_QM_SPI_STARVE
*May  4 00:45:02.033: IPSEC(key_engine): got a queue event with 1 KMI message(s)
*May  4 00:45:02.033: IPSEC(spi_response): getting spi 1752561220 for SA
        from 172.16.186.186 to 172.16.186.130 for prot 3
*May  4 00:45:02.033: ISAKMP:(1008): Creating IPSec SAs
*May  4 00:45:02.033:         inbound SA from 172.16.186.130 to 172.16.186.186 (f/i)  0/ 0
        (proxy 10.12.130.1 to 0.0.0.0)
*May  4 00:45:02.033:         has spi 0x6875F644 and conn_id 0
*May  4 00:45:02.033:         lifetime of 2147483 seconds
*May  4 00:45:02.033:         lifetime of 4608000 kilobytes
*May  4 00:45:02.033:         outbound SA from 172.16.186.186 to 172.16.186.130 (f/i) 0/0
        (proxy 0.0.0.0 to 10.12.130.1)
*May  4 00:45:02.033:         has spi  0x29354010 and conn_id 0
*May  4 00:45:02.033:         lifetime of 2147483 seconds
*May  4 00:45:02.033:         lifetime of 4608000 kilobytes
*May  4 00:45:02.033: ISAKMP:(1008): sending packet to 172.16.186.130 
                      my_port 500 peer_port 500 (R) QM_IDLE
*May  4 00:45:02.033: ISAKMP:(1008):Node -1665883002, Input = IKE_MESG_FROM_IPSEC, IKE_SPI_REPLY
*May  4 00:45:02.033: ISAKMP:(1008):Old State = IKE_QM_SPI_STARVE  New State = IKE_QM_R_QM2
*May  4 00:45:02.033: IPSEC(key_engine): got a queue event with 1 KMI message(s)
*May  4 00:45:02.033: IPSec: Flow_switching Allocated flow for sibling 80000007
*May  4 00:45:02.033: IPSEC(policy_db_add_ident): src 0.0.0.0, dest 10.12.130.1, dest_port 0

*May  4 00:45:02.033: IPSEC(create_sa): sa created,
  (sa) sa_dest= 172.16.186.186, sa_proto= 50,
    sa_spi= 0x6875F644(1752561220),
    sa_trans= esp-3des esp-sha-hmac , sa_conn_id= 11
*May  4 00:45:02.033: IPSEC(create_sa): sa created,
  (sa) sa_dest= 172.16.186.130, sa_proto= 50,
    sa_spi= 0x29354010(691355664),
    sa_trans= esp-3des esp-sha-hmac , sa_conn_id= 12
*May  4 00:45:02.045: ISAKMP (0:1008): received packet from 172.16.186.130 
                      dport 500 sport 500 Global (R) QM_IDLE
*May  4 00:45:02.045: ISAKMP:(1008):deleting node -1665883002 error 
                       FALSE reason "QM done (await)"
*May  4 00:45:02.045: ISAKMP:(1008):Node -1665883002, Input = IKE_MESG_FROM_PEER, 
                      IKE_QM_EXCH
*May  4 00:45:02.045: ISAKMP:(1008):Old State = IKE_QM_R_QM2  New State = 
                      IKE_QM_PHASE2_COMPLETE
*May  4 00:45:02.045: IPSEC(key_engine): got a queue event with 1 KMI message(s)
*May  4 00:45:02.045: IPSEC(key_engine_enable_outbound): rec'd enable notify 
                      from ISAKMP
*May  4 00:45:02.045: IPSEC(key_engine_enable_outbound): enable SA with spi 691355664/50

Easy VPN Remote 命令

  • debug crypto ipsec - 显示第 2 阶段的 IPsec 协商。

  • debug crypto isakmp - 显示第 1 阶段的 ISAKMP 协商。 

3-03-06-871W#debug crypto ipsec3-03-06-871W#debug crypto isakmp
*Jun  3 05:59:27.431: ISAKMP:(0): beginning Aggressive Mode exchange
*Jun  3 05:59:27.431: ISAKMP:(0): sending packet to 172.16.186.186 my_port 
                       500 peer_port 500 (I) AG_INIT_EXCH
*Jun  3 05:59:27.455: ISAKMP (0:0): received packet from 172.16.186.186 dport 
                       500 sport 500 Global (I) AG_INIT_EXCH
*Jun  3 05:59:27.455: ISAKMP:(0): processing SA payload. message ID = 0
*Jun  3 05:59:27.455: ISAKMP:(0): processing ID payload. message ID = 0
*Jun  3 05:59:27.455: ISAKMP (0:0): ID payload
        next-payload : 10
        type         : 1
        address      : 172.16.186.186
        protocol     : 17
        port         : 0
        length       : 12
*Jun  3 05:59:27.455: ISAKMP:(0):: peer matches *none* of the profiles
*Jun  3 05:59:27.455: ISAKMP:(0): processing vendor id payload
*Jun  3 05:59:27.455: ISAKMP:(0): vendor ID is Unity
*Jun  3 05:59:27.455: ISAKMP:(0): processing vendor id payload
*Jun  3 05:59:27.455: ISAKMP:(0): vendor ID is DPD
*Jun  3 05:59:27.455: ISAKMP:(0): processing vendor id payload
*Jun  3 05:59:27.455: ISAKMP:(0): speaking to another IOS box!
*Jun  3 05:59:27.455: ISAKMP:(0): local preshared key found
*Jun  3 05:59:27.455: ISAKMP : Scanning profiles for xauth ...
*Jun  3 05:59:27.455: ISAKMP:(0): Authentication by xauth preshared
*Jun  3 05:59:27.455: ISAKMP:(0):Checking ISAKMP transform 1 against priority 65515 policy
*Jun  3 05:59:27.455: ISAKMP:      encryption 3DES-CBC
*Jun  3 05:59:27.455: ISAKMP:      hash SHA
*Jun  3 05:59:27.455: ISAKMP:      default group 2
*Jun  3 05:59:27.459: ISAKMP:      auth XAUTHInitPreShared
*Jun  3 05:59:27.459: ISAKMP:      life type in seconds
*Jun  3 05:59:27.459: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*Jun  3 05:59:27.459: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Jun  3 05:59:27.459: ISAKMP:(0):atts are not acceptable. Next payload is 0
*Jun  3 05:59:27.459: ISAKMP:(0):Checking ISAKMP transform 1 against priority 65516 policy
*Jun  3 05:59:27.459: ISAKMP:      encryption 3DES-CBC
*Jun  3 05:59:27.459: ISAKMP:      hash SHA
*Jun  3 05:59:27.459: ISAKMP:      default group 2
*Jun  3 05:59:27.459: ISAKMP:      auth XAUTHInitPreShared
*Jun  3 05:59:27.459: ISAKMP:      life type in seconds
*Jun  3 05:59:27.459: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*Jun  3 05:59:27.459: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Jun  3 05:59:27.459: ISAKMP:(0):atts are not acceptable. Next payload is 0
*Jun  3 05:59:27.459: ISAKMP:(0):Checking ISAKMP transform 1 against priority 65517 policy
*Jun  3 05:59:27.459: ISAKMP:      encryption 3DES-CBC
*Jun  3 05:59:27.459: ISAKMP:      hash SHA
*Jun  3 05:59:27.459: ISAKMP:      default group 2
*Jun  3 05:59:27.459: ISAKMP:      auth XAUTHInitPreShared
*Jun  3 05:59:27.459: ISAKMP:      life type in seconds
*Jun  3 05:59:27.459: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*Jun  3 05:59:27.459: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Jun  3 05:59:27.459: ISAKMP:(0):atts are not acceptable. Next payload is 0
*Jun  3 05:59:27.459: ISAKMP:(0):Checking ISAKMP transform 1 against priority 65518 policy
*Jun  3 05:59:27.459: ISAKMP:      encryption 3DES-CBC
*Jun  3 05:59:27.459: ISAKMP:      hash SHA
*Jun  3 05:59:27.459: ISAKMP:      default group 2
*Jun  3 05:59:27.459: ISAKMP:      auth XAUTHInitPreShared
*Jun  3 05:59:27.459: ISAKMP:      life type in seconds
*Jun  3 05:59:27.459: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*Jun  3 05:59:27.459: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Jun  3 05:59:27.459: ISAKMP:(0):atts are not acceptable. Next payload is 0
*Jun  3 05:59:27.459: ISAKMP:(0):Checking ISAKMP transform 1 against priority 65519 policy
*Jun  3 05:59:27.459: ISAKMP:      encryption 3DES-CBC
*Jun  3 05:59:27.459: ISAKMP:      hash SHA
*Jun  3 05:59:27.459: ISAKMP:      default group 2
*Jun  3 05:59:27.459: ISAKMP:      auth XAUTHInitPreShared
*Jun  3 05:59:27.459: ISAKMP:      life type in seconds
*Jun  3 05:59:27.463: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*Jun  3 05:59:27.463: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Jun  3 05:59:27.463: ISAKMP:(0):atts are not acceptable. Next payload is 0
*Jun  3 05:59:27.463: ISAKMP:(0):Checking ISAKMP transform 1 against priority 65520 policy
*Jun  3 05:59:27.463: ISAKMP:      encryption 3DES-CBC
*Jun  3 05:59:27.463: ISAKMP:      hash SHA
*Jun  3 05:59:27.463: ISAKMP:      default group 2
*Jun  3 05:59:27.463: ISAKMP:      auth XAUTHInitPreShared
*Jun  3 05:59:27.463: ISAKMP:      life type in seconds
*Jun  3 05:59:27.463: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*Jun  3 05:59:27.463: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Jun  3 05:59:27.463: ISAKMP:(0):atts are not acceptable. Next payload is 0
*Jun  3 05:59:27.463: ISAKMP:(0):Checking ISAKMP transform 1 against priority 65521 policy
*Jun  3 05:59:27.463: ISAKMP:      encryption 3DES-CBC
*Jun  3 05:59:27.463: ISAKMP:      hash SHA
*Jun  3 05:59:27.463: ISAKMP:      default group 2
*Jun  3 05:59:27.463: ISAKMP:      auth XAUTHInitPreShared
*Jun  3 05:59:27.463: ISAKMP:      life type in seconds
*Jun  3 05:59:27.463: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*Jun  3 05:59:27.463: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Jun  3 05:59:27.463: ISAKMP:(0):atts are not acceptable. Next payload is 0
*Jun  3 05:59:27.463: ISAKMP:(0):Checking ISAKMP transform 1 against priority 65522 policy
*Jun  3 05:59:27.463: ISAKMP:      encryption 3DES-CBC
*Jun  3 05:59:27.463: ISAKMP:      hash SHA
*Jun  3 05:59:27.463: ISAKMP:      default group 2
*Jun  3 05:59:27.463: ISAKMP:      auth XAUTHInitPreShared
*Jun  3 05:59:27.463: ISAKMP:      life type in seconds
*Jun  3 05:59:27.463: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*Jun  3 05:59:27.463: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Jun  3 05:59:27.463: ISAKMP:(0):atts are not acceptable. Next payload is 0
*Jun  3 05:59:27.463: ISAKMP:(0):Checking ISAKMP transform 1 against priority 65523 policy
*Jun  3 05:59:27.463: ISAKMP:      encryption 3DES-CBC
*Jun  3 05:59:27.463: ISAKMP:      hash SHA
*Jun  3 05:59:27.463: ISAKMP:      default group 2
*Jun  3 05:59:27.463: ISAKMP:      auth XAUTHInitPreShared
*Jun  3 05:59:27.463: ISAKMP:      life type in seconds
*Jun  3 05:59:27.463: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*Jun  3 05:59:27.463: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Jun  3 05:59:27.463: ISAKMP:(0):atts are not acceptable. Next payload is 0
*Jun  3 05:59:27.463: ISAKMP:(0):Checking ISAKMP transform 1 against priority 65524 policy
*Jun  3 05:59:27.467: ISAKMP:      encryption 3DES-CBC
*Jun  3 05:59:27.467: ISAKMP:      hash SHA
*Jun  3 05:59:27.467: ISAKMP:      default group 2
*Jun  3 05:59:27.467: ISAKMP:      auth XAUTHInitPreShared
*Jun  3 05:59:27.467: ISAKMP:      life type in seconds
*Jun  3 05:59:27.467: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*Jun  3 05:59:27.467: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Jun  3 05:59:27.467: ISAKMP:(0):atts are not acceptable. Next payload is 0
*Jun  3 05:59:27.467: ISAKMP:(0):Checking ISAKMP transform 1 against priority 65525 policy
*Jun  3 05:59:27.467: ISAKMP:      encryption 3DES-CBC
*Jun  3 05:59:27.467: ISAKMP:      hash SHA
*Jun  3 05:59:27.467: ISAKMP:      default group 2
*Jun  3 05:59:27.467: ISAKMP:      auth XAUTHInitPreShared
*Jun  3 05:59:27.467: ISAKMP:      life type in seconds
*Jun  3 05:59:27.467: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*Jun  3 05:59:27.467: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Jun  3 05:59:27.467: ISAKMP:(0):atts are not acceptable. Next payload is 0
*Jun  3 05:59:27.467: ISAKMP:(0):Checking ISAKMP transform 1 against priority 65526 policy
*Jun  3 05:59:27.467: ISAKMP:      encryption 3DES-CBC
*Jun  3 05:59:27.467: ISAKMP:      hash SHA
*Jun  3 05:59:27.467: ISAKMP:      default group 2
*Jun  3 05:59:27.467: ISAKMP:      auth XAUTHInitPreShared
*Jun  3 05:59:27.467: ISAKMP:      life type in seconds
*Jun  3 05:59:27.467: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*Jun  3 05:59:27.467: ISAKMP:(0):Encryption algorithm offered does not match policy!
*Jun  3 05:59:27.467: ISAKMP:(0):atts are not acceptable. Next payload is 0
*Jun  3 05:59:27.467: ISAKMP:(0):Checking ISAKMP transform 1 against priority 65527 policy
*Jun  3 05:59:27.467: ISAKMP:      encryption 3DES-CBC
*Jun  3 05:59:27.467: ISAKMP:      hash SHA
*Jun  3 05:59:27.467: ISAKMP:      default group 2
*Jun  3 05:59:27.467: ISAKMP:      auth XAUTHInitPreShared
*Jun  3 05:59:27.467: ISAKMP:      life type in seconds
*Jun  3 05:59:27.467: ISAKMP:      life duration (VPI) of  0x0 0x20 0xC4 0x9B
*Jun  3 05:59:27.467: ISAKMP:(0):atts are acceptable. Next payload is 0
*Jun  3 05:59:27.467: ISAKMP (0:0): vendor ID is NAT-T v7
*Jun  3 05:59:27.467: ISAKMP:(0): processing KE payload. message ID = 0
*Jun  3 05:59:27.475: ISAKMP:(0): processing NONCE payload. message ID = 0
*Jun  3 05:59:27.475: ISAKMP:(2006): processing HASH payload. message ID = 0
*Jun  3 05:59:27.475: ISAKMP:(2006):SA authentication status:
        authenticated
*Jun  3 05:59:27.475: ISAKMP:(2006):SA has been authenticated with 172.16.186.186

*Jun  3 05:59:27.475: ISAKMP:(2006):Send initial contact
*Jun  3 05:59:27.475: ISAKMP:(2006): sending packet to 172.16.186.186 
                      my_port 500 peer_port 500 (I) AG_INIT_EXCH
*Jun  3 05:59:27.479: ISAKMP:(2006):Input = IKE_MESG_FROM_PEER, IKE_AM_EXCH
*Jun  3 05:59:27.479: ISAKMP:(2006):Old State = IKE_I_AM1  New State = IKE_P1_COMPLETE

*Jun  3 05:59:27.479: ISAKMP:(2006):Need XAUTH
*Jun  3 05:59:27.479: ISAKMP:(2006):Input = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE


!--- Phase 1 (ISAKMP) is complete.

*Jun  3 05:59:27.479: ISAKMP:(2006):Old State = IKE_P1_COMPLETE  New State = IKE_P1_COMPLETE


!--- Xauth initiates.

*Jun  3 05:59:27.479: ISAKMP (0:2006): received packet from 172.16.186.186 
                      dport 500 sport 500 Global (I) CONF_XAUTH
*Jun  3 05:59:27.483: ISAKMP: set new node 850198625 to CONF_XAUTH

*Jun  3 05:59:27.487: ISAKMP:(2006):processing transaction payload from 
                      172.16.186.186. message ID = -1517216966
*Jun  3 05:59:27.487: ISAKMP: Config payload REQUEST
*Jun  3 05:59:27.487: ISAKMP:(2006):checking request:
*Jun  3 05:59:27.487: ISAKMP:    XAUTH_USER_NAME_V2
*Jun  3 05:59:27.487: ISAKMP:    XAUTH_USER_PASSWORD_V2
*Jun  3 05:59:27.487: ISAKMP:(2006):Xauth process request
*Jun  3 05:59:27.487: ISAKMP:(2006):Input = IKE_MESG_FROM_PEER, IKE_CFG_REQUEST
*Jun  3 05:59:27.487: ISAKMP:(2006):Old State = IKE_P1_COMPLETE  
                      New State = IKE_XAUTH_REPLY_AWAIT

*Jun  3 05:59:30.242: EZVPN(ez): Pending XAuth Request, Please enter the 
                      following command:
*Jun  3 05:59:30.242: EZVPN: crypto ipsec client ezvpn xauth



!--- Enter the crypto ipsec client ezvpn xauth command. 

3-03-06-871W#crypto ipsec client ezvpn xauth

Username: cisco
Password:  
      
      

*Jun  3 06:02:46.498:         username: cisco
*Jun  3 06:02:46.498:         password: <omitted>
*Jun  3 06:02:46.498: ISAKMP:(2008): responding to peer config from 
                      172.16.186.186. ID = -605466681
*Jun  3 06:02:46.498: ISAKMP:(2008): sending packet to 172.16.186.186 my_port 
                      500 peer_port 500 (I) CONF_XAUTH
*Jun  3 06:02:46.498: ISAKMP:(2008):deleting node -605466681 error FALSE reason 
                       "Done with xauth request/reply exchange"
*Jun  3 06:02:46.498: ISAKMP:(2008):Input = IKE_MESG_INTERNAL, IKE_XAUTH_REPLY_ATTR
*Jun  3 06:02:46.498: ISAKMP:(2008):Old State = IKE_XAUTH_REPLY_AWAIT  New State = 
                      IKE_XAUTH_REPLY_SENT

*Jun  3 06:02:46.502: ISAKMP (0:2008): received packet from 172.16.186.186 dport 
                      500 sport 500 Global (I) CONF_XAUTH
*Jun  3 06:02:46.502: ISAKMP: set new node 1283697340 to CONF_XAUTH
*Jun  3 06:02:46.502: ISAKMP:(2008):processing transaction payload from 
                      172.16.186.186. message ID = 1283697340
*Jun  3 06:02:46.502: ISAKMP: Config payload SET
*Jun  3 06:02:46.502: ISAKMP:(2008):Xauth process set, status = 1
*Jun  3 06:02:46.502: ISAKMP:(2008):checking SET:
*Jun  3 06:02:46.502: ISAKMP:    XAUTH_STATUS_V2 XAUTH-OK
*Jun  3 06:02:46.502: ISAKMP:(2008):attributes sent in message:
*Jun  3 06:02:46.502:         Status: 1
*Jun  3 06:02:46.506: ISAKMP:(2008): sending packet to 172.16.186.186 
                      my_port 500 peer_port 500 (I) CONF_XAUTH
*Jun  3 06:02:46.506: ISAKMP:(2008):deleting node 1283697340 error FALSE 
                       reason "No Error"
*Jun  3 06:02:46.506: ISAKMP:(2008):Input = IKE_MESG_FROM_PEER, IKE_CFG_SET
*Jun  3 06:02:46.506: ISAKMP:(2008):Old State = IKE_XAUTH_REPLY_SENT  
                      New State = IKE_P1_COMPLETE

*Jun  3 06:02:46.506: ISAKMP:(2008):Need config/address
*Jun  3 06:02:46.506: ISAKMP: set new node 104696831 to CONF_ADDR
*Jun  3 06:02:46.506: ISAKMP: Sending APPLICATION_VERSION string: Cisco IOS 
                      Software, C870 Software (C870-ADVIPSERVICESK9-M), 
                      Experimental Version 12.4(20060201:210845) 
                      [prchadal-CSCsb79792-haw_t_pi4 101]
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Thu 02-Feb-06 03:19 by prchadal
*Jun  3 06:02:46.506: ISAKMP:(2008): initiating peer config to 172.16.186.186. 
                      ID = 104696831
*Jun  3 06:02:46.506: ISAKMP:(2008): sending packet to 172.16.186.186 my_port 
                      500 peer_port 500 (I) CONF_ADDR
*Jun  3 06:02:46.506: ISAKMP:(2008):Input = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE
*Jun  3 06:02:46.506: ISAKMP:(2008):Old State = IKE_P1_COMPLETE  New State = 
                      IKE_CONFIG_MODE_REQ_SENT

*Jun  3 06:02:46.510: ISAKMP (0:2008): received packet from 172.16.186.186 dport 
                      500 sport 500 Global (I) CONF_ADDR
*Jun  3 06:02:46.514: ISAKMP:(2008):processing transaction payload from 
                      172.16.186.186. message ID = 104696831
*Jun  3 06:02:46.514: ISAKMP: Config payload REPLY
*Jun  3 06:02:46.514: ISAKMP(0:2008) process config reply
*Jun  3 06:02:46.514: ISAKMP:(2008):deleting node 104696831 error 
                      FALSE reason "Transaction mode done"
*Jun  3 06:02:46.514: ISAKMP:(2008):Input = IKE_MESG_FROM_PEER, IKE_CFG_REPLY
*Jun  3 06:02:46.514: ISAKMP:(2008):Old State = IKE_CONFIG_MODE_REQ_SENT  
                      New State = IKE_P1_COMPLETE

*Jun  3 06:02:46.518: insert of map into mapdb AVL failed, map + ace pair 
                      already exists on the mapdb
*Jun  3 06:02:46.518: ISAKMP:(2008):Input = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE
*Jun  3 06:02:46.518: ISAKMP:(2008):Old State = IKE_P1_COMPLETE  New State = 
                      IKE_P1_COMPLETE

*Jun  3 06:02:46.522: IPSEC(sa_request): ,
  (key eng. msg.) OUTBOUND local= 172.16.186.130, remote= 172.16.186.186,
    local_proxy= 10.12.130.1/255.255.255.255/0/0 (type=1),
    remote_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4),
    protocol= ESP, transform= NONE  (Tunnel),
    lifedur= 2147483s and 4608000kb,
    spi= 0xA0FC0985(2700872069), conn_id= 0, keysize= 128, flags= 0x2000
*Jun  3 06:02:46.522: IPSEC(sa_request): ,
  (key eng. msg.) OUTBOUND local= 172.16.186.130, remote= 172.16.186.186,
    local_proxy= 10.12.130.1/255.255.255.255/0/0 (type=1),
    remote_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4),
    protocol= ESP, transform= NONE  (Tunnel),
    lifedur= 2147483s and 4608000kb,
    spi= 0xBB426C9(196355785), conn_id= 0, keysize= 128, flags= 0x2000
*Jun  3 06:02:46.522: IPSEC(sa_request): ,
  (key eng. msg.) OUTBOUND local= 172.16.186.130, remote= 172.16.186.186,
    local_proxy= 10.12.130.1/255.255.255.255/0/0 (type=1),
    remote_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4),
    protocol= ESP, transform= NONE  (Tunnel),
    lifedur= 2147483s and 4608000kb,
    spi= 0xB349BB06(3007953670), conn_id= 0, keysize= 192, flags= 0x2000
*Jun  3 06:02:46.522: IPSEC(sa_request): ,
  (key eng. msg.) OUTBOUND local= 172.16.186.130, remote= 172.16.186.186,
    local_proxy= 10.12.130.1/255.255.255.255/0/0 (type=1),
    remote_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4),
    protocol= ESP, transform= NONE  (Tunnel),
    lifedur= 2147483s and 4608000kb,
    spi= 0xC114CFB8(3239366584), conn_id= 0, keysize= 192, flags= 0x2000
*Jun  3 06:02:46.522: IPSEC(sa_request): ,
  (key eng. msg.) OUTBOUND local= 172.16.186.130, remote= 172.16.186.186,
    local_proxy= 10.12.130.1/255.255.255.255/0/0 (type=1),
    remote_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4),
    protocol= ESP, transform= NONE  (Tunnel),
    lifedur= 2147483s and 4608000kb,
    spi= 0x2ED87C62(785939554), conn_id= 0, keysize= 256, flags= 0x2000
*Jun  3 06:02:46.522: IPSEC(sa_request): ,
  (key eng. msg.) OUTBOUND local= 172.16.186.130, remote= 172.16.186.186,
    local_proxy= 10.12.130.1/255.255.255.255/0/0 (type=1),
    remote_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4),
    protocol= ESP, transform= NONE  (Tunnel),
    lifedur= 2147483s and 4608000kb,
    spi= 0x226A6FF3(577400819), conn_id= 0, keysize= 256, flags= 0x2000
*Jun  3 06:02:46.522: IPSEC(sa_request): ,
  (key eng. msg.) OUTBOUND local= 172.16.186.130, remote= 172.16.186.186,
    local_proxy= 10.12.130.1/255.255.255.255/0/0 (type=1),
    remote_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4),
    protocol= ESP, transform= NONE  (Tunnel),
    lifedur= 2147483s and 4608000kb,
    spi= 0x29354010(691355664), conn_id= 0, keysize= 0, flags= 0x2000
*Jun  3 06:02:46.526: IPSEC(sa_request): ,
  (key eng. msg.) OUTBOUND local= 172.16.186.130, remote= 172.16.186.186,
    local_proxy= 10.12.130.1/255.255.255.255/0/0 (type=1),
    remote_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4),
    protocol= ESP, transform= NONE  (Tunnel),
    lifedur= 2147483s and 4608000kb,
    spi= 0x12111E5C(303111772), conn_id= 0, keysize= 0, flags= 0x2000
*Jun  3 06:02:46.526: IPSEC(sa_request): ,
  (key eng. msg.) OUTBOUND local= 172.16.186.130, remote= 172.16.186.186,
    local_proxy= 10.12.130.1/255.255.255.255/0/0 (type=1),
    remote_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4),
    protocol= ESP, transform= NONE  (Tunnel),
    lifedur= 2147483s and 4608000kb,
    spi= 0x98084B9A(2550680474), conn_id= 0, keysize= 0, flags= 0x2000
*Jun  3 06:02:46.526: IPSEC(sa_request): ,
  (key eng. msg.) OUTBOUND local= 172.16.186.130, remote= 172.16.186.186,
    local_proxy= 10.12.130.1/255.255.255.255/0/0 (type=1),
    remote_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4),
    protocol= ESP, transform= NONE  (Tunnel),
    lifedur= 2147483s and 4608000kb,
    spi= 0x9442501B(2487373851), conn_id= 0, keysize= 0, flags= 0x0
*Jun  3 06:02:46.526: ISAKMP: set new node 0 to QM_IDLE
*Jun  3 06:02:46.526: ISAKMP:(2008): sitting IDLE. Starting QM immediately (QM_IDLE)
*Jun  3 06:02:46.526: ISAKMP:(2008):beginning Quick Mode exchange, M-ID of -1665883002
*Jun  3 06:02:46.526: ISAKMP:(2008):QM Initiator gets spi
*Jun  3 06:02:46.530: ISAKMP:(2008): sending packet to 172.16.186.186 my_port 
                      500 peer_port 500 (I) QM_IDLE
*Jun  3 06:02:46.530: ISAKMP:(2008):Node -1665883002, Input = IKE_MESG_INTERNAL, 
                      IKE_INIT_QM
*Jun  3 06:02:46.530: ISAKMP:(2008):Old State = IKE_QM_READY  New State = IKE_QM_I_QM1
*Jun  3 06:02:46.538: ISAKMP (0:2008): received packet from 172.16.186.186 
                      dport 500 sport 500 Global (I) QM_IDLE
*Jun  3 06:02:46.538: ISAKMP:(2008): processing HASH payload. message ID = -1665883002
*Jun  3 06:02:46.538: ISAKMP:(2008): processing SA payload. message ID = -1665883002
*Jun  3 06:02:46.538: ISAKMP:(2008):Checking IPSec proposal 1
*Jun  3 06:02:46.538: ISAKMP: transform 1, ESP_3DES
*Jun  3 06:02:46.538: ISAKMP:   attributes in transform:
*Jun  3 06:02:46.538: ISAKMP:      encaps is 1 (Tunnel)
*Jun  3 06:02:46.538: ISAKMP:      SA life type in seconds
*Jun  3 06:02:46.538: ISAKMP:      SA life duration (VPI) of  0x0 0x20 0xC4 0x9B
*Jun  3 06:02:46.538: ISAKMP:      SA life type in kilobytes
*Jun  3 06:02:46.538: ISAKMP:      SA life duration (VPI) of  0x0 0x46 0x50 0x0
*Jun  3 06:02:46.542: ISAKMP:      authenticator is HMAC-SHA
*Jun  3 06:02:46.542: ISAKMP:(2008):atts are acceptable.
*Jun  3 06:02:46.542: IPSEC(validate_proposal_request): proposal part #1
*Jun  3 06:02:46.542: IPSEC(validate_proposal_request): proposal part #1,
  (key eng. msg.) INBOUND local= 172.16.186.130, remote= 172.16.186.186,
    local_proxy= 10.12.130.1/255.255.255.255/0/0 (type=1),
    remote_proxy= 0.0.0.0/0.0.0.0/0/0 (type=4),
    protocol= ESP, transform= esp-3des esp-sha-hmac  (Tunnel),
    lifedur= 0s and 0kb,
    spi= 0x0(0), conn_id= 0, keysize= 0, flags= 0x0
*Jun  3 06:02:46.542: Crypto mapdb : proxy_match
        src addr     : 10.12.130.1
        dst addr     : 0.0.0.0
        protocol     : 0
        src port     : 0
        dst port     : 0
*Jun  3 06:02:46.542: ISAKMP:(2008): processing NONCE payload. message ID = -1665883002
*Jun  3 06:02:46.542: ISAKMP:(2008): processing ID payload. message ID = -1665883002
*Jun  3 06:02:46.542: ISAKMP:(2008): processing ID payload. message ID = -1665883002
*Jun  3 06:02:46.542: ISAKMP:(2008): processing NOTIFY RESPONDER_LIFETIME protocol 3
        spi 1752561220, message ID = -1665883002, sa = 83BCC9DC
*Jun  3 06:02:46.542: ISAKMP:(2008):SA authentication status:
        authenticated
*Jun  3 06:02:46.542: ISAKMP:(2008): processing responder lifetime
*Jun  3 06:02:46.542: ISAKMP (2008): responder lifetime of 3600s
*Jun  3 06:02:46.542: ISAKMP:(2008): Creating IPSec SAs
*Jun  3 06:02:46.542:         inbound SA from 172.16.186.186 to 172.16.186.130 (f/i) 0/ 0
        (proxy 0.0.0.0 to 10.12.130.1)
*Jun  3 06:02:46.542:         has spi 0x29354010 and conn_id 0
*Jun  3 06:02:46.542:         lifetime of 3590 seconds
*Jun  3 06:02:46.542:         lifetime of 4608000 kilobytes
*Jun  3 06:02:46.546:         outbound SA from 172.16.186.130 to 172.16.186.186 (f/i) 0/0
        (proxy 10.12.130.1 to 0.0.0.0)
*Jun  3 06:02:46.546:         has spi  0x6875F644 and conn_id 0
*Jun  3 06:02:46.546:         lifetime of 3590 seconds
*Jun  3 06:02:46.546:         lifetime of 4608000 kilobytes
*Jun  3 06:02:46.546: ISAKMP:(2008): sending packet to 172.16.186.186 
                      my_port 500 peer_port 500 (I) QM_IDLE
*Jun  3 06:02:46.546: ISAKMP:(2008):deleting node -1665883002 error FALSE 
                      reason "No Error"
*Jun  3 06:02:46.546: ISAKMP:(2008):Node -1665883002, Input = IKE_MESG_FROM_PEER, 
                      IKE_QM_EXCH
*Jun  3 06:02:46.546: ISAKMP:(2008):Old State = IKE_QM_I_QM1  New State = 
                      IKE_QM_PHASE2_COMPLETE
*Jun  3 06:02:46.546: IPSEC(key_engine): got a queue event with 1 KMI message(s)
*Jun  3 06:02:46.546: Crypto mapdb : proxy_match
        src addr     : 10.12.130.1
        dst addr     : 0.0.0.0
        protocol     : 0
        src port     : 0
        dst port     : 0
*Jun  3 06:02:46.546: IPSEC(crypto_ipsec_sa_find_ident_head): reconnecting with 
                      the same proxies and peer 172.16.186.186
*Jun  3 06:02:46.546: IPSEC(policy_db_add_ident): src 10.12.130.1, dest 0.0.0.0, 
                      dest_port 0

*Jun  3 06:02:46.546: IPSEC(create_sa): sa created,
  (sa) sa_dest= 172.16.186.130, sa_proto= 50,
    sa_spi= 0x29354010(691355664),
    sa_trans= esp-3des esp-sha-hmac , sa_conn_id= 11
*Jun  3 06:02:46.546: IPSEC(create_sa): sa created,
  (sa) sa_dest= 172.16.186.186, sa_proto= 50,
    sa_spi= 0x6875F644(1752561220),
    sa_trans= esp-3des esp-sha-hmac , sa_conn_id= 12
*Jun  3 06:02:46.550: IPSEC(update_current_outbound_sa): 
updated peer 172.16.186.186 current outbound sa to SPI 6875F644
*Jun  3 06:02:46.550: %CRYPTO-6-EZVPN_CONNECTION_UP: (Client)  
User=  Group=vpngrp  Client_public_addr=172.16.186.130  
Server_public_addr=172.16.186.186  NEM_Remote_Subnets=10.12.130.1/255.255.255.255
*Jun  3 06:02:47.130: ISAKMP: set new node -1866551769 to QM_IDLE

相关信息

修订历史记录

版本 发布日期 备注
1.0
13-Apr-2009
初始版本

此文档是否有帮助?

Feedback反馈

联系我们

本文档适用于以下产品