Ce document décrit l'assemblage et le brochage des câbles EIA/TIA-232 (équipement terminal de traitement de données - ETTD et équipement de communication de données - ETCD).
Aucune spécification déterminée n'est requise pour ce document.
Ce document n'est pas limité à des versions de matériel et de logiciel spécifiques.
The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.
Pour plus d'informations sur les conventions utilisées dans ce document, reportez-vous à Conventions relatives aux conseils techniques Cisco.
Remarque : Les flèches indiquent la direction du signal : —> indique ETTD à ETCD et < : indique ETCD à ETTD.
60 broches*1* | Signal | Description | Direction | 25 broches | Signal |
---|---|---|---|---|---|
J1-50 J1-51 J1-52 | MODE_0 GND MODE_DCE | Groupe de déviation | — | — | — |
J1-46 | Blindage GND | Unique | — | J2-1 | Blindage GND |
Blindage J1-41 | TxD/RxD — | Paire torsadée no 5 | -->-- | Blindage J2-2 | RxD — |
Blindage J1-36 | RxD/TxD — | Paire torsadée no 9 | <— — | Blindage J2-3 | RxD — |
Blindage J1-42 | RTS/CTS-- | Paire torsadée no 4 | -->-- | Blindage J2-4 | RTS — |
Blindage J1-35 | CTS/RTS — | Paire torsadée no 10 | <— — | Blindage J2-5 | CTS — |
Blindage J1-34 | DSR/DTR — | Paire torsadée no 11 | <— — | Blindage J2-6 | DSR — |
Blindage J1-45 | Circuit GND -- | Paire torsadée no 1 | — | Blindage J2-7 | Circuit GND -- |
Blindage J1-33 | DCD/LL — | Paire torsadée no 12 | <— — | Blindage J2-8 | DCD — |
Blindage J1-37 | TxC/NIL — | Paire torsadée no 8 | <— — | Blindage J2-15 | TxC — |
Blindage J1-38 | TxC/TxCE — | Paire torsadée no 7 | <— — | Blindage J2-17 | RxC — |
Blindage J1-44 | LL/DCD — | Paire torsadée no 2 | -->-- | Blindage J2-18 | LTST — |
Blindage J1-43 | DTR/DSR — | Paire torsadée no 3 | -->-- | Blindage J2-20 | DTR — |
Blindage J1-39 | TxCE/TxC — | Paire torsadée no 6 | -->-- | Blindage J2-24 | TxCE — |
*1* Aucune broche non référencée n'est connectée. |
Remarque : Les flèches indiquent la direction du signal : —> indique ETTD à ETCD et < : indique ETCD à ETTD.
60 broches*1* | Signal | Description | Direction | 25 broches | Signal |
---|---|---|---|---|---|
J1-50 J1-51 | MODE_0 GND | Groupe de déviation | — | — | — |
J1-46 | Blindage GND | Unique | — | J2-1 | Blindage GND |
Blindage J1-36 | RxD/TxD — | Paire torsadée no 9 | <— — | Blindage J2-2 | TxD — |
Blindage J1-41 | TxD/RxD — | Paire torsadée no 5 | -->-- | Blindage J2-3 | RxD — |
Blindage J1-35 | CTS/RTS — | Paire torsadée no 10 | <— — | Blindage J2-4 | RTS — |
Blindage J1-42 | RTS/CTS-- | Paire torsadée no 4 | -->-- | Blindage J2-5 | CTS — |
Blindage J1-43 | DTR/DSR — | Paire torsadée no 3 | -->-- | Blindage J2-6 | DSR — |
Blindage J1-45 | Circuit GND -- | Paire torsadée no 1 | — | Blindage J2-7 | Circuit GND |
Blindage J1-44 | LL/DCD — | Paire torsadée no 2 | -->-- | Blindage J2-8 | DCD — |
Blindage J1-39 | TxCE/TxC — | Paire torsadée no 7 | -->-- | Blindage J2-15 | TxC — |
Blindage J1-40 | NIL/RxC — | Paire torsadée no 6 | -->-- | Blindage J2-17 | RxC — |
Blindage J1-33 | DCD/LL — | Paire torsadée no 12 | <— — | Blindage J2-18 | LTST — |
Blindage J1-34 | DSR/DTR — | Paire torsadée no 11 | <— — | Blindage J2-20 | DTR — |
Blindage J1-38 | RxC/TxCE — | Paire torsadée no 8 | <— — | Blindage J2-24 | TxCE — |
*1* Aucune broche non référencée n'est connectée. |
Révision | Date de publication | Commentaires |
---|---|---|
1.0 |
04-Mar-2008 |
Première publication |