WPA2-PSK和使用Cisco 5760 WLC的開放式身份驗證配置示例

下載選項

PDF (437.8 KB)
在多種裝置上使用 Adobe Reader 檢視
ePub (348.0 KB)
在 iPhone、iPad、Android、Sony Reader 或 Windows Phone 上的各種應用程式中檢視
Mobi (Kindle) (433.6 KB)
在 Kindle 裝置或多部裝置的 Kindle 應用程式上檢視

已更新: 2015 年 11 月 5 日

文件 ID:116880

無偏見用語

本產品的文件集力求使用無偏見用語。針對本文件集的目的，無偏見係定義為未根據年齡、身心障礙、性別、種族身分、民族身分、性別傾向、社會經濟地位及交織性表示歧視的用語。由於本產品軟體使用者介面中硬式編碼的語言、根據 RFP 文件使用的語言，或引用第三方產品的語言，因此本文件中可能會出現例外狀況。深入瞭解思科如何使用包容性用語。

關於此翻譯

思科已使用電腦和人工技術翻譯本文件，讓全世界的使用者能夠以自己的語言理解支援內容。請注意，即使是最佳機器翻譯，也不如專業譯者翻譯的內容準確。Cisco Systems, Inc. 對這些翻譯的準確度概不負責，並建議一律查看原始英文文件（提供連結）。

簡介

本檔案將說明在無線LAN(WLAN)中使用Wi-Fi保護存取2(WPA2)的優勢。本文檔提供了在WLAN上實施WPA2的兩個配置示例：

配置WPA2預共用金鑰(PSK)
開放式身份驗證的配置

必要條件

需求

思科建議您瞭解以下主題：

無線保護存取(WPA)
WLAN安全解決方案

採用元件

本文中的資訊係根據以下軟體和硬體版本：

採用Cisco IOS^® XE軟體版本3.3的Cisco 5700系^列無線LAN控制器(WLC)
Cisco Aironet 3600系列輕量型存取點
Microsoft Windows 7本機無線請求方

本文中的資訊是根據特定實驗室環境內的裝置所建立。文中使用到的所有裝置皆從已清除（預設）的組態來啟動。如果您的網路正在作用，請確保您已瞭解任何指令可能造成的影響。

設定

附註：使用命令查詢工具(僅供已註冊客戶使用)可獲取本節中使用的命令的更多資訊。

網路圖表

此圖顯示網路圖：

圖1.網路圖

使用CLI進行WPA2-PSK配置

此範例介紹使用指令行介面(CLI)為用於使用者端的VLAN設定DHCP窺探的程式。

VLAN20用於使用者端，且池是在同一個WLC上設定的。Cisco 5700 WLC中的TenGigabitEthernet1/0/1連線到上行鏈路交換器。如果在除WLC之外的伺服器上或在外部DHCP伺服器上配置DHCP伺服器，則必須信任DHCP監聽和中繼資訊。

ip device tracking
ip dhcp snooping vlan 12,20,30,40
ip dhcp snooping
!
ip dhcp pool vlan20
 network 20.20.20.0 255.255.255.0
 default-router 20.20.20.1

interface Vlan20
 ip address 20.20.20.1 255.255.255.0

interface TenGigabitEthernet1/0/1
 switchport trunk native vlan 12
 switchport mode trunk
 ip dhcp relay information trusted
 ip dhcp snooping trust

wlan wpa2psk 1 wpa2psk
 client vlan 20
 no security wpa akm dot1x
 security wpa akm psk set-key ascii 0 Cisco123
 no shutdown

附註：如果配置中的PSK密碼包含空格，則使用「password PSK」格式。如果也使用GUI進行配置，則應使用相同的格式。

範例

security wpa akm psk set-key ascii 0 "Cisco 123"

使用GUI的WPA2-PSK配置

完成以下步驟，以便在WLC GUI中設定WPA2 PSK:

導覽至Configuration > Wireless > WLAN > WLANs，然後建立一個新的WLAN:
啟用WPA2，並將其對映到所需的介面：
按一下Security頁籤，選中WPA2 Policy覈取方塊，然後選擇AES作為WPA2加密。在「Auth Key Mgmt」下拉選單中，選擇PSK。輸入客戶端將用於連線的PSK:

使用CLI開放式身份驗證配置

以下範例顯示如何使用CLI為用於使用者端的VLAN設定DHCP窺探；在本例中，VLAN20用於客戶端。池是在同一個WLC上設定的。

5760 WLC中的10GigabitEthernet1/0/1連線到上行鏈路交換機。如果您在WLC之外的伺服器或外部DHCP伺服器上配置了DHCP伺服器，則必須信任DHCP監聽和中繼資訊。

ip device tracking
ip dhcp snooping vlan 12,20,30,40
ip dhcp snooping
!
ip dhcp pool vlan20
 network 20.20.20.0 255.255.255.0
 default-router 20.20.20.1

interface Vlan20
 ip address 20.20.20.1 255.255.255.0

interface TenGigabitEthernet1/0/1
 switchport trunk native vlan 12
 switchport mode trunk
 ip dhcp relay information trusted
 ip dhcp snooping trust

wlan open 5 open
 client vlan VLAN0020
 no security wpa
 no security wpa akm dot1x
 no security wpa wpa2
 no security wpa wpa2 ciphers aes
 session-timeout 1800
 no shutdown

使用GUI的開放式身份驗證配置

以下程式說明如何在WLC GUI中設定開放驗證：

導覽至Configuration > Wireless > WLAN > WLANs，然後建立一個新的WLAN:
按一下Security頁籤。在Layer2頁籤和Layer3頁籤下，將所有內容設定為無。以下是組態結果的範例：

驗證

使用本節內容，確認您的組態是否正常運作。

確認WPA2-PSK客戶端已連線：

確認客戶端已連線到開放式身份驗證：

疑難排解

本節提供的資訊可用於對組態進行疑難排解。

附註：

輸出直譯器工具(僅供已註冊客戶使用)支援某些show命令。使用輸出直譯器工具來檢視show命令輸出的分析。

使用 debug 指令之前，請先參閱有關 Debug 指令的重要資訊。

以下是有用debug和trace命令的輸出示例：

debug client mac XXXX.XXXX.XXXX

Controller#sh debugging 
Nova Platform:
    dot11/state debugging is on 
    pem/events debugging is on 
    client/mac-addr debugging is on 
    dot11/detail debugging is on 
    mac/ filters[string 0021.5c8c.c761] debugging is on 
    dot11/error debugging is on 
    dot11/mobile debugging is on 
    pem/state debugging is on 

set trace group-wireless-client filter mac XXXX.XXXX.XXXX
set trace wcm-dot1x event filter mac XXXX.XXXX.XXXX
set trace wcm-dot1x aaa filter mac XXXX.XXXX.XXXX
set trace aaa wireless events filter mac XXXX.XXXX.XXXX
set trace access-session core sm filter mac XXXX.XXXX.XXXX
set trace access-session method dot1x filter XXXX.XXXX.XXXX

*Sep  1 05:55:01.321: 0021.5C8C.C761 Association received from mobile on AP  
   C8F9.F983.4260  1 wcm: i.D^Iw for client
*Sep  1 05:55:01.321: 0021.5C8C.C761 qos upstream policy is unknown and 
   downstream policy is unknown 1 wcm: r client
*Sep  1 05:55:01.321: 0021.5C8C.C761 apChanged 0 wlanChanged 1 mscb ipAddr 
   20.20.20.3, apf RadiusOverride 0x0, numIPv6Addr=0 1 wcm: nJ^Iwy_status 0 
   attr len^G$8\227v^K
*Sep  1 05:55:01.321: 0021.5C8C.C761 Applying WLAN policy on MSCB. 1 wcm:  
   ipAddr 20.20.20.3, apf RadiusOverride 0x0, numIPv6Addr=0
*Sep  1 05:55:01.321: 0021.5C8C.C761 Scheduling deletion of Mobile Station: 1 
   wcm:   (callerId: 50) in 1 seconds
*Sep  1 05:55:01.321: 0021.5C8C.C761 Disconnecting client due to switch of 
   WLANs from 6(wep) to 5(open) 1 wcm: 
*Sep  1 05:55:02.193: 0021.5C8C.C761 apfMsExpireCallback (apf_ms.c: 1 wcm: 664)
   Expiring Mobile!
*Sep  1 05:55:02.193: 0021.5C8C.C761 apfMsExpireMobileStation (apf_ms.c: 1 wcm:
   6953) Changing state for mobile  0021.5C8C.C761  on AP  C8F9.F983.4260  from
   Associated to Disassociated 
*Sep  1 05:55:02.193: 0021.5C8C.C761 Sent Deauthenticate to mobile on BSSID  
   C8F9.F983.4260  slot 1(caller apf_ms.c: 1 wcm: 7036)
*Sep  1 05:55:02.193: 0021.5C8C.C761 apfMsExpireMobileStation (apf_ms.c: 1 wcm:
   7092) Changing state for mobile  0021.5C8C.C761  on AP  C8F9.F983.4260  from
   Disassociated to Idle 
*Sep  1 05:55:02.193:  0021.5C8C.C761  20.20.20.3 RUN (20) Deleted mobile LWAPP
   rule on AP [ C8F9.F983.4260 ] 1 wcm: 5C8C.C761  on AP  C8F9.F983.4260  from 
   Disassociated to Idle 
*Sep  1 05:55:02.193:  0021.5C8C.C761  20.20.20.3 RUN (20) FastSSID for the 
   client [ C8F9.F983.4260 ] NOTENABLED 1 wcm: C.C761  on AP  C8F9.F983.4260  
   from Disassociated to Idle 
*Sep  1 05:55:02.193: 0021.5C8C.C761 Incrementing the Reassociation Count 1 for
   client (of interface VLAN0020) 1 wcm: D
*Sep  1 05:55:02.193: 0021.5C8C.C761 Clearing Address 20.20.20.3 on mobile  1 
   wcm: for client (of interface VLAN0020)
*Sep  1 05:55:02.193: PEM recv processing msg Del SCB(4)  1 wcm: 0.20.3 on 
   mobile 
*Sep  1 05:55:02.193:  0021.5C8C.C761  20.20.20.3 RUN (20) Skipping TMP rule 
   add 1 wcm: lient (of interface VLAN0020)
*Sep  1 05:55:02.193:  0021.5C8C.C761  20.20.20.3 RUN (20) Change state to 
   DHCP_REQD (7) last state RUN (20) 1 wcm:
*Sep  1 05:55:02.193: 0021.5C8C.C761 WCDB_CHANGE: 1 wcm:  Client 1 m_vlan 20 
   Radio iif id 0xbfcdc00000003a bssid iif id 0x8959800000004a, bssid 
   C8F9.F983.4260
*Sep  1 05:55:02.193: 0021.5C8C.C761 WCDB_AUTH: 1 wcm:  Adding opt82 len 0
*Sep  1 05:55:02.193: 0021.5C8C.C761 WCDB_CHANGE: 1 wcm:  Suppressing SPI 
   (client pending deletion) pemstate 7 state LEARN_IP(2) vlan 20 client_id 
   0xac70800000004b mob=Local(1) ackflag 2 dropd 0, delete 1
*Sep  1 05:55:02.193: 0021.5C8C.C761 Sending SPI spi_epm_epm_terminate_session 
   successfull 1 wcm:  pemstate 7 state LEARN_IP(2) vlan 20 client_id 
   0xac70800000004b mob=Local(1) ackflag 2 dropd 0, delete 1
*Sep  1 05:55:02.194: 0021.5C8C.C761 Sending SPI spi_epm_epm_terminate_session 
   successfull 1 wcm:  pemstate 7 state LEARN_IP(2) vlan 20 client_id 
   0xac70800000004b mob=Local(1) ackflag 2 dropd 0, delete 1
*Sep  1 05:55:02.194: 0021.5C8C.C761 Deleting wireless client; Reason code 0, 
   Preset 1, AAA cause 1 1 wcm:  7 state LEARN_IP(2) vlan 20 client_id 
   0xac70800000004b mob=Local(1) ackflag 2 dropd 0, delete 1
*Sep  1 05:55:02.194: 0021.5C8C.C761 WCDB_DEL: 1 wcm:  Successfully sent
*Sep  1 05:55:02.194: 0021.5C8C.C761  Expiring mobile state delete 1 wcm: on 
   code 0, Preset 1, AAA cause 1
*Sep  1 05:55:02.194:  0021.5C8C.C761  0.0.0.0 DHCP_REQD (7) Handling pemDelScb
   Event skipping delete 1 wcm:  state LEARN_IP(2) vlan 20 client_id 
   0xac70800000004b mob=Local(1) ackflag 2 dropd 0, delete 1
*Sep  1 05:55:02.197: 0021.5C8C.C761 WCDB SPI response msg handler client code 
   1 mob state 1 1 wcm: g delete
*Sep  1 05:55:02.197: 0021.5C8C.C761 apfProcessWcdbClientDelete: 1 wcm:  Delete
   ACK from WCDB.
*Sep  1 05:55:02.197: 0021.5C8C.C761 WCDB_DELACK: 1 wcm:  wcdbAckRecvdFlag 
   updated
*Sep  1 05:55:02.197: 0021.5C8C.C761 WCDB_DELACK: 1 wcm:  Client IIF Id dealloc
   SUCCESS w/ 0xac70800000004b.
*Sep  1 05:55:02.197: 0021.5C8C.C761 Invoked platform delete and cleared handle
   1 wcm: w/ 0xac70800000004b.
*Sep  1 05:55:02.197: 0021.5C8C.C761 Deleting mobile on AP  C8F9.F983.4260 (1)
   1 wcm: w/ 0xac70800000004b.
*Sep  1 05:55:02.197: 0021.5C8C.C761 Unlinked and freed mscb 1 wcm: 
   8F9.F983.4260 (1) 
*Sep  1 05:55:02.197: WCDB_IIF: 1 wcm:  Ack Message ID: 0xac70800000004b code
   1003
*Sep  1 05:55:02.379: 0021.5C8C.C761 Adding mobile on LWAPP AP  C8F9.F983.4260
   (1)  1 wcm: xac7080000.D^Iwb.
*Sep  1 05:55:02.379: 0021.5C8C.C761  Creating WL station entry for client -  
   rc 0 1 wcm: 
*Sep  1 05:55:02.379: 0021.5C8C.C761 Association received from mobile on AP  
   C8F9.F983.4260  1 wcm: 0.D^Iwb.
*Sep  1 05:55:02.379: 0021.5C8C.C761 qos upstream policy is unknown and 
   downstream policy is unknown 1 wcm: 
*Sep  1 05:55:02.379: 0021.5C8C.C761 apChanged 0 wlanChanged 0 mscb ipAddr 
   0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0 1 wcm: \2105HnJ^Iwlient_id
   0xac708000^G$8\227v^K
*Sep  1 05:55:02.379: 0021.5C8C.C761 Applying WLAN policy on MSCB. 1 wcm:  
   ipAddr 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0
*Sep  1 05:55:02.379: 0021.5C8C.C761 Applying WLAN ACL policies to client 1 
   wcm:  0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0
*Sep  1 05:55:02.379: 0021.5C8C.C761 No Interface ACL used for Wireless client 
   in WCM(NGWC) 1 wcm: usOverride 0x0, numIPv6Addr=0
*Sep  1 05:55:02.379: 0021.5C8C.C761 Applying site-specific IPv6 override for 
   station  0021.5C8C.C761  - vapId 5, site 'default-group', interface 
   'VLAN0020' 1 wcm: 
*Sep  1 05:55:02.379: 0021.5C8C.C761 Applying local bridging Interface Policy 
   for station  0021.5C8C.C761  - vlan 20, interface 'VLAN0020' 1 wcm: erface 
   'VLAN0020'
*Sep  1 05:55:02.379: 0021.5C8C.C761 STA - rates (8): 1 wcm:  
   140 18 152 36 176 72 96 108 0 0 0 0 0 0 0 0
*Sep  1 05:55:02.379: 0021.5C8C.C761 new capwap_wtp_iif_id b6818000000038, 
   sm capwap_wtp_iif_id 0 1 wcm: 8C.C761  - vlan 20, interface 'VLAN0020'
*Sep  1 05:55:02.379: 0021.5C8C.C761 WCDB_ADD: 1 wcm:  Radio IIFID 
   0xbfcdc00000003a, BSSID IIF Id 0xbb30c000000046, COS 4
*Sep  1 05:55:02.379: Load Balancer: 1 wcm:  Success, Resource allocated are: 
   Active Switch number: 1, Active Asic number : 0, Reserve Switch number 0 
   Reserve Asic number 0. AP Asic num 0
*Sep  1 05:55:02.379: 0021.5C8C.C761 WCDB_ADD: 1 wcm:  Anchor Sw  1, Doppler 0
*Sep  1 05:55:02.380: 0021.5C8C.C761 WCDB_ALLOCATE: 1 wcm:  Client IIF Id alloc
   SUCCESS w/ client 8e7bc00000004d (state 0).
*Sep  1 05:55:02.380: 0021.5C8C.C761 iifid Clearing Ack flag 1 wcm: F Id alloc
   SUCCESS w/ client 8e7bc00000004d (state 0).
*Sep  1 05:55:02.380: 0021.5C8C.C761 WCDB_ADD: 1 wcm:  Adding opt82 len 0
*Sep  1 05:55:02.380: 0021.5C8C.C761 WCDB_ADD: 1 wcm:  Cleaering Ack flag
*Sep  1 05:55:02.380: 0021.5C8C.C761 WCDB_ADD: 1 wcm:  ssid open bssid
   C8F9.F983.4260 vlan 20 auth=ASSOCIATION(0) wlan(ap-group/global) 5/5 
   client 0 assoc 1 mob=Unassoc(0) radio 1 m_vlan 20 ip 0.0.0.0 src 
   0xb6818000000038 dst 0x0 cid 0x8e7bc00000004d glob rsc id 14dhcpsrv  
   0.0.0.0  ty
*Sep  1 05:55:02.380: 0021.5C8C.C761 WCDB_ADD: 1 wcm:  mscb iifid 
   0x8e7bc00000004d msinfo iifid 0x0
*Sep  1 05:55:02.380:  0021.5C8C.C761  0.0.0.0 START (0) Initializing policy 1 
   wcm: info iifid 0x0
*Sep  1 05:55:02.380:  0021.5C8C.C761  0.0.0.0 START (0) Change state to 
   AUTHCHECK (2) last state AUTHCHECK (2) 1 wcm: -group/global) 5/5 client 0 
   assoc 1 mob=Unassoc(0) radio 1 m_vlan 20 ip 0.0.0.0 src 0xb6818000000038 
   dst 0x0 cid 0x8e7bc00000004d glob rsc id 14dhcpsrv  0.0.0.0  ty
*Sep  1 05:55:02.380:  0021.5C8C.C761  0.0.0.0 AUTHCHECK (2) Change state to 
   L2AUTHCOMPLETE (4) last state L2AUTHCOMPLETE (4) 1 wcm:  5/5 client 0 assoc 
   1 mob=Unassoc(0) radio 1 m_vlan 20 ip 0.0.0.0 src 0xb6818000000038 dst 0x0 
   cid 0x8e7bc00000004d glob rsc id 14dhcpsrv  0.0.0.0 ty
*Sep  1 05:55:02.380: 0021.5C8C.C761 WCDB_CHANGE: 1 wcm:  Client 1 m_vlan 20 
   Radio iif id 0xbfcdc00000003a bssid iif id 0xbb30c000000046, bssid 
   C8F9.F983.4260
*Sep  1 05:55:02.380: 0021.5C8C.C761 WCDB_AUTH: 1 wcm:  Adding opt82 len 0
*Sep  1 05:55:02.380: 0021.5C8C.C761 WCDB_LLM: 1 wcm:  NoRun Prev Mob 0, Curr 
   Mob 0 llmReq 1, return False
*Sep  1 05:55:02.380: 0021.5C8C.C761 auth state 1 mob state 0 setWme 0 wme 1 
   roam_sent 0 1 wcm: rn False
*Sep  1 05:55:02.380: 0021.5C8C.C761 WCDB_CHANGE: 1 wcm:  auth=L2_AUTH(1) vlan 
   20 radio 1 client_id 0x8e7bc00000004d mobility=Unassoc(0) src_int 
   0xb6818000000038 dst_int 0x0 ackflag 0 reassoc_client 0 llm_notif 0 ip  
   0.0.0.0 ip_learn_type UNKNOWN
*Sep  1 05:55:02.380: 0021.5C8C.C761 WCDB_CHANGE: 1 wcm:  In L2 auth but l2ack 
   waiting lfag not set,so set
*Sep  1 05:55:02.380:  0021.5C8C.C761  0.0.0.0 L2AUTHCOMPLETE (4) DHCP Not 
   required on AP  C8F9.F983.4260  vapId 5 apVapId 5for this client 1 wcm: 
   6818000000038 dst_int 0x0 ackflag 0 reassoc_client 0 llm_notif 0 i$=6v.0.0.0
   it^_Dv^\7HnP6v^D6Hl5Ht^_Dv$6H8^ r^D6H>&5v8^ r^D6H>&5v^D6Ht^M^Lw^\7H8^ r
*Sep  1 05:55:02.380: WCDB_IIF: 1 wcm:  Ack Message ID: 0x8e7bc00000004d code 
   1001
*Sep  1 05:55:02.380: 0021.5C8C.C761 Not Using WMM Compliance code qosCap 00 1
   wcm: quired on AP  C8F9.F983.4260  vapId 5 apVapId 5for this client
*Sep  1 05:55:02.380:  0021.5C8C.C761  0.0.0.0 L2AUTHCOMPLETE (4) Plumbed 
   mobile LWAPP rule on AP  C8F9.F983.4260  vapId 5 apVapId 5 1 wcm: client
*Sep  1 05:55:02.380:  0021.5C8C.C761  0.0.0.0 L2AUTHCOMPLETE (4) Change state 
   to DHCP_REQD (7) last state DHCP_REQD (7) 1 wcm:  apVapId 5
*Sep  1 05:55:02.380: 0021.5C8C.C761 WCDB_CHANGE: 1 wcm:  Client 1 m_vlan 20 
   Radio iif id 0xbfcdc00000003a bssid iif id 0xbb30c000000046, bssid 
   C8F9.F983.4260
*Sep  1 05:55:02.380: 0021.5C8C.C761 WCDB_AUTH: 1 wcm:  Adding opt82 len 0
*Sep  1 05:55:02.380: 0021.5C8C.C761 WCDB_CHANGE: 1 wcm:  Suppressing SPI 
   (Mobility state not known) pemstate 7 state LEARN_IP(2) vlan 20 client_id 
   0x8e7bc00000004d mob=Unassoc(0) ackflag 1 dropd 0
*Sep  1 05:55:02.380: 0021.5C8C.C761 Incrementing the Reassociation Count 1 for
   client (of interface VLAN0020) 1 wcm: EARN_IP(2) vlan 20 client_id 
   0x8e7bc00000004d mob=Unassoc(0) ackflag 1 dropd 0
*Sep  1 05:55:02.380: 0021.5C8C.C761 apfPemAddUser2 (apf_policy.c: 1 wcm: 161) 
   Changing state for mobile  0021.5C8C.C761  on AP  C8F9.F983.4260  from Idle 
   to Associated 
*Sep  1 05:55:02.380: 0021.5C8C.C761 Scheduling deletion of Mobile Station: 1 
   wcm:   (callerId: 49) in 1800 seconds
*Sep  1 05:55:02.380: 0021.5C8C.C761 Ms Timeout = 1800, Session Timeout = 1800
   1 wcm: llerId: 49) in 1800 seconds
*Sep  1 05:55:02.381: 0021.5C8C.C761 Sending Assoc Response to station on BSSID
   C8F9.F983.4260  (status 0) ApVapId 5 Slot 1 1 wcm: .F983.4260  from Idle to
   Associated 
*Sep  1 05:55:02.381: 0021.5C8C.C761 apfProcessAssocReq (apf_80211.c: 1 wcm: 
   5260) Changing state for mobile  0021.5C8C.C761  on AP  C8F9.F983.4260  
   from Associated to Associated 
*Sep  1 05:55:02.381:  0021.5C8C.C761  0.0.0.0 DHCP_REQD (7) pemAdvanceState2: 
   1 wcm:  MOBILITY-INCOMPLETE with state 7. 
*Sep  1 05:55:02.381:  0021.5C8C.C761  0.0.0.0 DHCP_REQD (7) pemAdvanceState2: 
   1 wcm:  MOBILITY-INCOMPLETE with state 7. 
*Sep  1 05:55:02.381:  0021.5C8C.C761  0.0.0.0 DHCP_REQD (7) pemAdvanceState2: 
   1 wcm:  MOBILITY-COMPLETE with state 7. 
*Sep  1 05:55:02.381:  0021.5C8C.C761  0.0.0.0 DHCP_REQD (7) State Update from 
   Mobility-Incomplete to Mobility-Complete, mobility role=Local, client 
   state=APF_MS_STATE_ASSOCIATED 1 wcm:  1 dropd 0
*Sep  1 05:55:02.381:  0021.5C8C.C761  0.0.0.0 DHCP_REQD (7) pemAdvanceState2 
   3611, Adding TMP rule 1 wcm: o Mobility-Complete, mobility role=Local, 
   client state=APF_MS_STATE_ASSOCIATED
*Sep  1 05:55:02.381:  0021.5C8C.C761  0.0.0.0 DHCP_REQD (7) Adding Fast Path 
   rule on AP  C8F9.F983.4260 , slot 1 802.1P = 0 1 wcm: role=Local, client 
   state=APF_MS_STATE_ASSOCIATED
*Sep  1 05:55:02.381:  0021.5C8C.C761  0.0.0.0 DHCP_REQD (7) Successfully 
   plumbed mobile rule  1 wcm: F9.F983.4260 , slot 1 802.1P = 0^M 
*Sep  1 05:55:02.381: 0021.5C8C.C761 WCDB_CHANGE: 1 wcm:  Client 1 m_vlan 20 
   Radio iif id 0xbfcdc00000003a bssid iif id 0xbb30c000000046, bssid 
   C8F9.F983.4260
*Sep  1 05:55:02.381: 0021.5C8C.C761 WCDB_AUTH: 1 wcm:  Adding opt82 len 0
*Sep  1 05:55:02.381: 0021.5C8C.C761 WCDB_LLM: 1 wcm:  NoRun Prev Mob 0, Curr 
   Mob 1 llmReq 1, return False
*Sep  1 05:55:02.381: 0021.5C8C.C761 WCDB_CHANGE: 1 wcm:  Suppressing SPI (ACK 
   message not recvd) pemstate 7 state LEARN_IP(2) vlan 20 client_id 
   0x8e7bc00000004d mob=Local(1) ackflag 1 dropd 1
*Sep  1 05:55:02.381: 0021.5C8C.C761 Error updating wcdb on mobility complete  
   1 wcm: not recvd) pemstate 7 state LEARN_IP(2) vlan 20 client_id 
   0x8e7bc00000004d mob=Local(1) ackflag 1 dropd 1
*Sep  1 05:55:02.381: PEM recv processing msg Epm spi response(12)  1 wcm:  
   complete 
*Sep  1 05:55:02.381: 0021.5C8C.C761 aaa attribute list length is 79 1 wcm: 
   complete 
*Sep  1 05:55:02.381: 0021.5C8C.C761 Sending SPI spi_epm_epm_session_create 
   successfull 1 wcm: ) pemstate 7 state LEARN_IP(2) vlan 20 client_id 
   0x8e7bc00000004d mob=Local(1) ackflag 1 dropd 1
*Sep  1 05:55:02.381: PEM recv processing msg Add SCB(3)  1 wcm: 
   pm_session_create successfull
*Sep  1 05:55:02.381: 0021.5C8C.C761 0.0.0.0, auth_state 7 mmRole Local !!! 1 
   wcm: successfull
*Sep  1 05:55:02.381: 0021.5C8C.C761 0.0.0.0, auth_state 7 mmRole Local, 
   updating wcdb not needed 1 wcm:  7 state LEARN_IP(2) vlan 20 client_id 
   0x8e7bc00000004d mob=Local(1) ackflag 1 dropd 1
*Sep  1 05:55:02.381: 0021.5C8C.C761 Tclas Plumb needed: 1 wcm:  0
*Sep  1 05:55:02.384: EPM: 1 wcm:  Session create resp - client handle 
   8e7bc00000004d session b8000020 
*Sep  1 05:55:02.384: EPM: 1 wcm:  Netflow session create resp - client handle
   8e7bc00000004d sess b8000020
*Sep  1 05:55:02.384: PEM recv processing msg Epm spi response(12)  1 wcm: 
   le 8e7bc00000004d sess b8000020
*Sep  1 05:55:02.384: 0021.5C8C.C761 Received session_create_response for 
   client handle 40105511256850509 1 wcm:  LEARN_IP(2) vlan 20 client_id 
   0x8e7bc00000004d mob=Local(1) ackflag 1 dropd 1
*Sep  1 05:55:02.384: 0021.5C8C.C761 Received session_create_response with EPM
   session handle 3087007776 1 wcm: 
*Sep  1 05:55:02.384: 0021.5C8C.C761 Send request to EPM 1 wcm: ate_response 
   with EPM session handle 3087007776
*Sep  1 05:55:02.384: 0021.5C8C.C761 aaa attribute list length is 5 1 wcm: e 
   with EPM session handle 3087007776
*Sep  1 05:55:02.384: 0021.5C8C.C761 Sending Activate request for session 
   handle 3087007776 successful 1 wcm: 6
*Sep  1 05:55:02.384: 0021.5C8C.C761 Post-auth policy request sent! Now wait 
   for post-auth policy ACK from EPM 1 wcm: N_IP(2) vlan 20 client_id 
   0x8e7bc00000004d mob=Local(1) ackflag 1 dropd 1
*Sep  1 05:55:02.384: 0021.5C8C.C761 WCDB SPI response msg handler client code 
   0 mob state 0 1 wcm: licy ACK from EPM
*Sep  1 05:55:02.384: 0021.5C8C.C761 WcdbClientUpdate: 1 wcm:  L2 Auth ACK from
   WCDB
*Sep  1 05:55:02.384: 0021.5C8C.C761 WCDB_L2ACK: 1 wcm:  wcdbAckRecvdFlag 
   updated
*Sep  1 05:55:02.384: 0021.5C8C.C761 WCDB_CHANGE: 1 wcm:  Client 1 m_vlan 20 
   Radio iif id 0xbfcdc00000003a bssid iif id 0xbb30c000000046, bssid 
   C8F9.F983.4260
*Sep  1 05:55:02.384: 0021.5C8C.C761 WCDB_AUTH: 1 wcm:  Adding opt82 len 0
*Sep  1 05:55:02.384: 0021.5C8C.C761 WCDB_LLM: 1 wcm:  NoRun Prev Mob 0, Curr 
   Mob 1 llmReq 1, return False
*Sep  1 05:55:02.385: 0021.5C8C.C761 auth state 2 mob state 1 setWme 0 wme 1 
   roam_sent 0 1 wcm: rn False
*Sep  1 05:55:02.385: 0021.5C8C.C761 WCDB_CHANGE: 1 wcm:  auth=LEARN_IP(2) vlan
   20 radio 1 client_id 0x8e7bc00000004d mobility=Local(1) src_int 
   0xb6818000000038 dst_int 0x0 ackflag 2 reassoc_client 0 llm_notif 0 ip  
   0.0.0.0 ip_learn_type UNKNOWN
*Sep  1 05:55:02.385: EPM: 1 wcm:  Init feature, client handle 8e7bc00000004d 
   session b8000020 authz ec00000e 
*Sep  1 05:55:02.385: EPM: 1 wcm:  Activate feature client handle 
   8e7bc00000004d sess b8000020 authz ec00000e
*Sep  1 05:55:02.385: PEM recv processing msg Epm spi response(12)  1 wcm: 004d
   sess b8000020 authz ec00000e
*Sep  1 05:55:02.385: 0021.5C8C.C761 Received activate_features_resp for client
   handle 40105511256850509 1 wcm: 004d mobility=Local(1) src_int 
   0xb6818000000038 dst_int 0x0 ackflag 2 reassoc_client 0 llm_notif 0 
   ip$=6v0.0.0 ipt^_Dv^\7HnP6v^D6Hl5Ht^_Dv$6H8^ r^D6H>&5v8^ 
   r^D6H>&5v^D6Ht^M^Lw^\7H8^ r
*Sep  1 05:55:02.385: 0021.5C8C.C761 Received activate_features_resp for EPM 
   session handle 3087007776 1 wcm: 9
*Sep  1 05:55:02.385: EPM: 1 wcm:  Policy enforcement -  client handle 
   8e7bc00000004d session 2800000e authz ec00000e 
*Sep  1 05:55:02.385: EPM: 1 wcm:  Netflow policy enforcement - client handle 
   8e7bc00000004d sess 2800000e authz ec00000e msg_type 0 policy_status 0 attr 
   len 0
*Sep  1 05:55:02.385: PEM recv processing msg Epm spi response(12)  1 wcm: e 
   8e7bc00000004d sess 2800000e authz ec00000e msg_type 0 policy_status 0 attr 
   len 0
*Sep  1 05:55:02.385: 0021.5C8C.C761 Received policy_enforcement_response for 
   client handle 40105511256850509 1 wcm: 00e msg_type 0 policy_status 0 attr 
   len 0
*Sep  1 05:55:02.385: 0021.5C8C.C761 Received policy_enforcement_response for 
   EPM session handle 671088654 1 wcm: 09
*Sep  1 05:55:02.385: 0021.5C8C.C761 Received response for 
   _EPM_SPI_ACTIVATE_FEATURES request sent for client 1 wcm: 00e msg_type 0 
   policy_status 0 attr len 0
*Sep  1 05:55:02.385: 0021.5C8C.C761 Received _EPM_SPI_STATUS_SUCCESS for 
   request sent for client 1 wcm:  for client
*Sep  1 05:55:02.385: 0021.5C8C.C761 Post-auth policy ACK recvd from EPM, unset
   flag on MSCB 1 wcm: ient
*Sep  1 05:55:02.400: 0021.5C8C.C761 WCDB_IP_BIND: 1 wcm:  w/ IPv4 20.20.20.3 
   ip_learn_type DHCP add_delete 1,options_length 0
*Sep  1 05:55:02.400: 0021.5C8C.C761 WcdbClientUpdate: 1 wcm:  IP Binding from
   WCDB ip_learn_type 1, add_or_delete 1
*Sep  1 05:55:02.400: 0021.5C8C.C761 IPv4 Addr: 1 wcm:  20:20:20:3 
*Sep  1 05:55:02.400: 0021.5C8C.C761 MS got the IP, resetting the Reassociation
   Count 0 for client 1 wcm: _delete 1
*Sep  1 05:55:02.400:  0021.5C8C.C761  20.20.20.3 DHCP_REQD (7) Change state to
   RUN (20) last state RUN (20) 1 wcm: length 0
*Sep  1 05:55:02.400: 0021.5C8C.C761 WCDB_CHANGE: 1 wcm:  Client 1 m_vlan 20 
   Radio iif id 0xbfcdc00000003a bssid iif id 0xbb30c000000046, bssid 
   C8F9.F983.4260
*Sep  1 05:55:02.400: 0021.5C8C.C761 WCDB_AUTH: 1 wcm:  Adding opt82 len 0
*Sep  1 05:55:02.401: 0021.5C8C.C761 WCDB_LLM: 1 wcm:  prev Mob state 1 curr 
   Mob State 1 llReq flag 0
*Sep  1 05:55:02.401: 0021.5C8C.C761 auth state 4 mob state 1 setWme 0 wme 1 
   roam_sent 0 1 wcm: g 0
*Sep  1 05:55:02.401: 0021.5C8C.C761 WCDB_CHANGE: 1 wcm:  auth=RUN(4) vlan 20 
   radio 1 client_id 0x8e7bc00000004d mobility=Local(1) src_int 
   0xb6818000000038 dst_int 0x0 ackflag 2 reassoc_client 0 llm_notif 0 ip  
   20.20.20.3 ip_learn_type DHCP
*Sep  1 05:55:02.401:  0021.5C8C.C761  20.20.20.3 RUN (20) Reached 
   PLUMBFASTPATH: 1 wcm:  from line 4430
*Sep  1 05:55:02.401:  0021.5C8C.C761  20.20.20.3 RUN (20) Replacing Fast Path
   rule on AP  C8F9.F983.4260 , slot 1 802.1P = 0
 1 wcm: 0xb6818000000038 dst_int 0x0 ackflag 2 reassoc_client 0 llm_notif 0 ip
   20.$=6v0.3 ip_lt^_Dv^\7HnP6v^D6Hl5Ht^_Dv$6H8^ r^D6H>&5v8^ 
   r^D6H>&5v^D6Ht^M^Lw^\7H8^ r
*Sep  1 05:55:02.401:  0021.5C8C.C761  20.20.20.3 RUN (20) Successfully plumbed
   mobile rule  1 wcm:  C8F9.F983.4260 , slot 1 802.1P = 0^M 
*Sep  1 05:55:02.401: 0021.5C8C.C761 
 Sending IPv4 update to Controller 10.105.135.176 1 wcm: e 
*Sep  1 05:55:02.401: 0021.5C8C.C761 Assigning Address 20.20.20.3 to mobile  1
   wcm: 05.135.176  
*Sep  1 05:55:02.401: PEM recv processing msg Add SCB(3)  1 wcm: 20.20.3 to 
   mobile 
*Sep  1 05:55:02.401: 0021.5C8C.C761 20.20.20.3, auth_state 20 mmRole Local !!!
   1 wcm: 135.176  
*Sep  1 05:55:02.401: 0021.5C8C.C761 20.20.20.3, auth_state 20 mmRole Local, 
   updating wcdb not needed 1 wcm: 3.4260 , slot 1 802.1P = 0^M 
*Sep  1 05:55:02.401: 0021.5C8C.C761 Tclas Plumb needed: 1 wcm:  0
*Sep  1 05:55:20.083: 0021.5C8C.C761 
Client stats update: 1 wcm:  Time now in sec 1378014920, Last Acct Msg Sent at
   1378014902 sec

修訂記錄

修訂	發佈日期	意見
1.0	05-Nov-2015	初始版本

由思科工程師貢獻