使用Cisco 7500路由器和LightStream 1010交換機配置VPN MPLS over ATM

下載選項

  • PDF     (446.1 KB)
    在多種裝置上使用 Adobe Reader 檢視
  • ePub     (113.2 KB)
    在 iPhone、iPad、Android、Sony Reader 或 Windows Phone 上的各種應用程式中檢視
  • Mobi (Kindle)     (131.3 KB)
    在 Kindle 裝置或多部裝置的 Kindle 應用程式上檢視
已更新: 2005 年 6 月 5 日
文件 ID:10533

無偏見用語

本產品的文件集力求使用無偏見用語。針對本文件集的目的，無偏見係定義為未根據年齡、身心障礙、性別、種族身分、民族身分、性別傾向、社會經濟地位及交織性表示歧視的用語。由於本產品軟體使用者介面中硬式編碼的語言、根據 RFP 文件使用的語言，或引用第三方產品的語言，因此本文件中可能會出現例外狀況。深入瞭解思科如何使用包容性用語。

關於此翻譯

思科已使用電腦和人工技術翻譯本文件，讓全世界的使用者能夠以自己的語言理解支援內容。請注意，即使是最佳機器翻譯，也不如專業譯者翻譯的內容準確。Cisco Systems, Inc. 對這些翻譯的準確度概不負責，並建議一律查看原始英文文件（提供連結）。

簡介

本文顯示如何使用Cisco 7500路由器作為標籤邊緣路由器(LER)，使用LightStream 1010交換機作為標籤交換路由器(LSR)，在ATM上配置虛擬專用網路(VPN)多協定標籤交換(MPLS)。兩台乙太網連線的路由器（每台都位於遠端客戶站點上）是VPN的一部分。在本文檔中，我們將檢視端到端裝置配置和有用的show命令。

必要條件

需求

本文件沒有特定需求。

慣例

如需文件慣例的詳細資訊，請參閱思科技術提示慣例。

設定

本節提供用於設定本文件中所述功能的資訊。

網路圖表

此文件使用以下網路設定：

vpn-mpls-1.gif

網路說明

當前設定在VPN術語中包含以下元素：

  • CE =客戶邊緣路由器

  • PE =提供商邊緣路由器

  • P=提供商路由器

當前設定在MPLS術語中包含以下元素：

  • LER =標籤邊緣路由器

  • LSR =標籤交換路由器

  • TDP/LDP =標籤分發協定/標籤分發協定

組態

本檔案會使用以下設定：

  • PE1和PE2是ATM網路中的LER。

  • P1和P2是LSR。

  • CE1和CE2是客戶邊緣路由器，它們並不知道VPN或MPLS並不執行。

  • CE1和CE2分別通過乙太網連線到PE1和PE2，並執行路由資訊協定(RIP)。

  • PE1、PE2、P1和P2執行開放最短路徑優先(OSPF)，並且都位於區域0中。OSPF是ATM網路中使用的內部閘道通訊協定(IGP)。在所有四台ATM裝置上的ATM介面上使用標籤交換。標籤分發協定(TDP)將標籤分配給OSPF路由。

  • PE1和PE2是多協定邊界網關協定(MP-BGP)對等體。

  • RIP路由被重分佈到MP-BGP中。在PE1和PE2路由器上，MP-BGP路由被重分發到RIP。

  • 該設定在PE1和PE2路由器中維護單獨的VRF路由表。

  • 本示例中使用的VPN名稱為NEW。

CE1 
! 
version 12.1 
service timestamps debug datetime msec 
service timestamps log datetime msec 

! 
boot system flashow c4500-js-mz.121-5 
! 

ip subnet-zero 

! 
interface Loopback0 
 ip address 10.1.1.1 255.255.255.0 
! 
interface Loopback1 
 ip address 10.2.2.2 255.255.255.0 
! 
interface Loopback2 
 ip address 10.3.3.3 255.255.255.0 
! 
interface Ethernet0 
 ip address 100.1.1.2 255.255.255.0 
 media-type 10BaseT 

! 

router rip 
 version 2 
 network 10.0.0.0 
 network 100.0.0.0 
 no auto-summary 
! 
ip classless 
!

PE1 
! 
version 12.1 

service timestamps debug uptime 
service timestamps log uptime 

! 
boot system flashow slot1:rsp-jsv-mz.121-5a.bin 
! 

ip subnet-zero 

! 
ip vrf NEW 
 rd 200:1 
 route-target export 200:1 
 route-target import 200:1 
ip cef distributed 

! 
interface Loopback0 
 ip address 1.1.1.1 255.255.255.255 
! 
interface ATM2/0/0 
 mtu 1500 
 no ip address 
! 
interface ATM2/0/0.10 tag-switching 
 ip unnumbered Loopback0 
 tag-switching ip 
! 
interface Ethernet2/1/0 
 ip vrf forwarding NEW 
 ip address 100.1.1.1 255.255.255.0 

! 
router ospf 100 
 no log-adjacency-changes 
 network 1.0.0.0 0.255.255.255 area 0 
 network 100.1.1.0 0.0.0.255 area 0 
! 
router rip 
 version 2 
 network 100.0.0.0 
 no auto-summary 
 ! 
 address-family ipv4 vrf NEW 
 version 2 
 redistribute bgp 200 metric 0 
 network 100.0.0.0 
 no auto-summary 
 exit-address-family 
! 
router bgp 200 
 bgp log-neighbor-changes 
 neighbor 2.2.2.2 remote-as 200 

 neighbor 2.2.2.2 update-source Loopback0 
 no auto-summary 
 ! 
 address-family ipv4 vrf NEW 
 redistribute rip 
 no auto-summary 
 no synchronization 
 exit-address-family 
 ! 
 address-family vpnv4 
 neighbor 2.2.2.2 activate 
 neighbor 2.2.2.2 send-community extended 
 no auto-summary 
 exit-address-family 
! 
ip classless 
!

P1 
!

service timestamps debug uptime 
service timestamps log uptime 
!

ip subnet-zero 
! 

interface Loopback0 
 ip address 4.4.4.4 255.255.255.255 
 no ip directed-broadcast 
! 
interface ATM12/0/0 
 ip unnumbered Loopback0 
 no ip directed-broadcast 

 tag-switching ip 
! 
interface ATM12/0/1 
 ip unnumbered Loopback0 
 no ip directed-broadcast 

 tag-switching ip 

! 
router ospf 100 
 network 4.0.0.0 0.255.255.255 area 0 
! 
ip classless 
!

P2 
! 
service timestamps debug uptime 
service timestamps log uptime 

! 
ip subnet-zero 

! 
interface Loopback0 
 ip address 3.3.3.3 255.255.255.255 
 no ip directed-broadcast 
!  
interface ATM0/1/1 
 ip unnumbered Loopback0 
 no ip directed-broadcast 

 tag-switching ip 
! 
interface ATM0/1/3 
 ip unnumbered Loopback0 
 no ip directed-broadcast 

 tag-switching ip 

! 
router ospf 100 
 network 3.0.0.0 0.255.255.255 area 0 
! 
ip classless 
!

PE2 
! 
version 12.1 
service timestamps debug datetime msec 
service timestamps log datetime msec 

! 
boot system flashow slot0:rsp-jsv-mz.121-5a 
! 

ip subnet-zero 

! 
ip vrf NEW 
 rd 200:1 
 route-target export 200:1 
 route-target import 200:1 
ip cef distributed 

! 
interface Loopback0 
 ip address 2.2.2.2 255.255.255.255 
! 

interface FastEthernet3/0/0 
 ip vrf forwarding NEW 
 ip address 110.1.1.1 255.255.255.0 

 half-duplex 
! 

interface ATM3/1/0.1 tag-switching 
 ip unnumbered Loopback0 
 tag-switching ip 
! 
router ospf 100 
 log-adjacency-changes 
 network 2.0.0.0 0.255.255.255 area 0 

! 
router rip 
 version 2 
 network 110.0.0.0 
 no auto-summary 
 ! 
 address-family ipv4 vrf NEW 
 version 2 
 redistribute bgp 200 metric 0 
 network 110.0.0.0 
 no auto-summary 
 exit-address-family 
! 
router bgp 200 
 bgp log-neighbor-changes 
 neighbor 1.1.1.1 remote-as 200 

 neighbor 1.1.1.1 update-source Loopback0 

 no auto-summary 
 ! 
 address-family ipv4 vrf NEW 
 redistribute rip 
 no auto-summary 
 no synchronization 
 exit-address-family 
 ! 
 address-family vpnv4 
 neighbor 1.1.1.1 activate 
 neighbor 1.1.1.1 send-community extended
 no auto-summary 
 exit-address-family 
! 
ip classless 
!

CE2 
! 
version 12.1 

service timestamps debug uptime 
service timestamps log uptime 

! 

boot system disk0:c7100-jo3s56i-mz.121-5.T.bin 

! 
ip subnet-zero 

! 
interface Loopback0 
 ip address 30.1.1.1 255.255.255.0 
! 
interface Loopback1 
 ip address 30.2.2.2 255.255.255.0 
! 
interface Loopback2 
 ip address 30.3.3.3 255.255.255.0 
! 
interface FastEthernet0/0 
 ip address 110.1.1.2 255.255.255.0 

! 
router rip 
 version 2 
 network 30.0.0.0 
 network 110.0.0.0 
 no auto-summary 
!

show命令

使用以下命令測試您的網路是否正常運作：

  • show ip route — 顯示IP路由表條目。

  • show ip rip database vrf — 顯示特定VRF的RIP資料庫中包含的資訊。

  • show ip bgp vpnv4 vrf — 顯示BGP表中的VPN地址資訊。

  • show tag-switching interfaces detail — 顯示有關啟用MPLS功能的一個或多個介面的資訊。

  • show tag-switching tdp bindings — 顯示從ATM LDP標籤繫結資料庫請求的條目。

  • show tag-switching forwarding-table vrf — 檢查用於特定路由的標籤堆疊。

以下輸出是在網路圖所示的裝置上輸入這些命令的結果。此輸出顯示網路運作正常。

CE1 

Cisco4500#show ip route 
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP 
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 
       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP 
       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area 
       * - candidate default, U - per-user static route, o - ODR 
       P - periodic downloaded static route 

Gateway of last resort is not set 

     100.0.0.0/24 is subnetted, 1 subnets 
C       100.1.1.0 is directly connected, Ethernet0 
     110.0.0.0/24 is subnetted, 1 subnets 
R       110.1.1.0 [120/1] via 100.1.1.1, 00:00:14, Ethernet0 
     10.0.0.0/24 is subnetted, 3 subnets 
C       10.3.3.0 is directly connected, Loopback2 
C       10.2.2.0 is directly connected, Loopback1 
C       10.1.1.0 is directly connected, Loopback0 
     30.0.0.0/24 is subnetted, 3 subnets 
R       30.3.3.0 [120/1] via 100.1.1.1, 00:00:14, Ethernet0 
R       30.2.2.0 [120/1] via 100.1.1.1, 00:00:15, Ethernet0 
R       30.1.1.0 [120/1] via 100.1.1.1, 00:00:15, Ethernet0

PE1 

Cisco7500a#show ip route 
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP 
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 
       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP 
       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area 
       * - candidate default, U - per-user static route, o - ODR 
       P - periodic downloaded static route 

Gateway of last resort is not set 

     1.0.0.0/32 is subnetted, 1 subnets 
C       1.1.1.1 is directly connected, Loopback0 
     2.0.0.0/32 is subnetted, 1 subnets 
O       2.2.2.2 [110/4] via 4.4.4.4, 18:17:37, ATM2/0/0.10 
     3.0.0.0/32 is subnetted, 1 subnets 
O       3.3.3.3 [110/3] via 4.4.4.4, 18:17:37, ATM2/0/0.10 
     4.0.0.0/32 is subnetted, 1 subnets 
O       4.4.4.4 [110/2] via 4.4.4.4, 18:17:37, ATM2/0/0.10 

Cisco7500a#show ip route vrf NEW 
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP 
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 
       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP 
       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area 
       * - candidate default, U - per-user static route, o - ODR 
       P - periodic downloaded static route 

Gateway of last resort is not set 

     100.0.0.0/24 is subnetted, 1 subnets 
C       100.1.1.0 is directly connected, Ethernet2/1/0 
     110.0.0.0/24 is subnetted, 1 subnets 
B       110.1.1.0 [200/0] via 2.2.2.2, 00:26:11 
     10.0.0.0/24 is subnetted, 3 subnets 
R       10.3.3.0 [120/1] via 100.1.1.2, 00:00:11, Ethernet2/1/0 
R       10.2.2.0 [120/1] via 100.1.1.2, 00:00:11, Ethernet2/1/0 
R       10.1.1.0 [120/1] via 100.1.1.2, 00:00:11, Ethernet2/1/0 
     30.0.0.0/24 is subnetted, 3 subnets 
B       30.3.3.0 [200/1] via 2.2.2.2, 00:26:12 
B       30.2.2.0 [200/1] via 2.2.2.2, 00:26:12 
B       30.1.1.0 [200/1] via 2.2.2.2, 00:26:12

Cisco7500a#show ip rip database vrf NEW 
10.0.0.0/8    auto-summary 
10.1.1.0/24 
    [1] via 100.1.1.2, 00:00:18, Ethernet2/1/0 
10.2.2.0/24 
    [1] via 100.1.1.2, 00:00:18, Ethernet2/1/0 
10.3.3.0/24 
    [1] via 100.1.1.2, 00:00:18, Ethernet2/1/0 
30.0.0.0/8    auto-summary 
30.1.1.0/24    redistributed 
    [1] via 2.2.2.2, 
30.2.2.0/24    redistributed 
    [1] via 2.2.2.2, 
30.3.3.0/24    redistributed 
    [1] via 2.2.2.2, 
100.0.0.0/8    auto-summary 
100.1.1.0/24    directly connected, Ethernet2/1/0 
110.0.0.0/8    auto-summary 
110.1.1.0/24    redistributed 
    [1] via 2.2.2.2, 

Cisco7500a#show ip bgp vpnv4 vrf NEW 
BGP table version is 17, local router ID is 1.1.1.1 
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal 
Origin codes: i - IGP, e - EGP, ? - incomplete 

   Network          Next Hop            Metric LocPrf Weight Path 
Route Distinguisher: 200:1 (default for vrf NEW) 
*> 10.1.1.0/24      100.1.1.2                1         32768 ? 
*> 10.2.2.0/24      100.1.1.2                1         32768 ? 
*> 10.3.3.0/24      100.1.1.2                1         32768 ? 
*>i30.1.1.0/24      2.2.2.2                  1    100      0 ? 
*>i30.2.2.0/24      2.2.2.2                  1    100      0 ? 
*>i30.3.3.0/24      2.2.2.2                  1    100      0 ? 
*> 100.1.1.0/24     0.0.0.0                  0         32768 ? 
*>i110.1.1.0/24     2.2.2.2                  0    100      0 ? 

Cisco7500a#show tag-switching interfaces 
Interface              IP    Tunnel   Operational 
ATM2/0/0.10            Yes   No       Yes         (ATM tagging) 

Cisco7500a#show tag-switching interfaces detail 
Interface ATM2/0/0.10: 
        IP tagging enabled 
        TSP Tunnel tagging not enabled 
        Tagging operational 
        Tagswitching turbo vector 
        MTU = 4470 
        ATM tagging: 
                Tag VPI = 1 
                Tag VCI range = 33 - 65535 
                Control VC = 0/32 

Cisco7500a#show tag-switching ? 
  atm-tdp           ATM Tagging Protocol information 
  cos-map           Show Tag CoS ATM Multi-VC CoS Map 
  forwarding-table  Show the Tag Forwarding Information Base (TFIB) 
  interfaces        Show per-interface tag switching 
  prefix-map        Show Tag CoS Prefix Map 
  tdp               Tag Distribution Protocol information 
  
Cisco7500a#show tag-switching tdp bindings 
  tib entry: 1.1.1.1/32, rev 2 
        local binding:  tag: imp-null 
  tib entry: 2.2.2.2/32, rev 23 
        local binding:  tag: 27 
  tib entry: 3.3.3.3/32, rev 21 
        local binding:  tag: 26 
  tib entry: 4.4.4.4/32, rev 10 
        local binding:  tag: 28 

Cisco7500a#show tag-switching atm-tdp bindings 
 Destination: 4.4.4.4/32 
    Headend Router ATM2/0/0.10 (1 hop) 1/33  Active, VCD=24 
 Destination: 3.3.3.3/32 
    Headend Router ATM2/0/0.10 (2 hops) 1/43  Active, VCD=25 
 Destination: 2.2.2.2/32 
    Headend Router ATM2/0/0.10 (3 hops) 1/42  Active, VCD=26 
 Destination: 1.1.1.1/32 
    Tailend Router ATM2/0/0.10 1/33 Active, VCD=24 

Cisco7500a#show tag-switching forwarding-table vrf NEW 
Local  Outgoing    Prefix            Bytes tag  Outgoing   Next Hop 
tag    tag or VC   or Tunnel Id      switched   interface 
29     Aggregate   100.1.1.0/24[V]   2080 
30     Untagged    10.3.3.0/24[V]    0          Et2/1/0    100.1.1.2 
31     Untagged    10.2.2.0/24[V]    0          Et2/1/0    100.1.1.2 
32     Untagged    10.1.1.0/24[V]    0          Et2/1/0    100.1.1.2

P1 

LS1010#show ip route 
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP 
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 
       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP 
       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate default 
       U - per-user static route, o - ODR 
       T - traffic engineered route 

Gateway of last resort is not set 

     1.0.0.0/32 is subnetted, 1 subnets 
O       1.1.1.1 [110/2] via 1.1.1.1, 19:00:12, ATM12/0/0 
     2.0.0.0/32 is subnetted, 1 subnets 
O       2.2.2.2 [110/3] via 3.3.3.3, 19:00:12, ATM12/0/1 
     3.0.0.0/32 is subnetted, 1 subnets 
O       3.3.3.3 [110/2] via 3.3.3.3, 19:00:12, ATM12/0/1 
     4.0.0.0/32 is subnetted, 1 subnets 
C       4.4.4.4 is directly connected, Loopback0 

LS1010#show tag-switching atm-tdp bindings 
 Destination: 4.4.4.4/32 
    Tailend Switch ATM12/0/0 1/33 Active -> Terminating Active 
    Tailend Switch ATM12/0/1 1/34 Active -> Terminating Active 
 Destination: 2.2.2.2/32 
    Transit ATM12/0/0 1/42 Active -> ATM12/0/1 1/35 Active 
 Destination: 1.1.1.1/32 
    Transit ATM12/0/1 1/33 Active -> ATM12/0/0 1/33 Active 
 Destination: 3.3.3.3/32 
    Transit ATM12/0/0 1/43 Active -> ATM12/0/1 1/34 Active

P2 

LS1010#show ip route 
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP 
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 
       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP 
       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate default 
       U - per-user static route, o - ODR 

Gateway of last resort is 10.118.1.21 to network 0.0.0.0 

     1.0.0.0/32 is subnetted, 1 subnets 
O       1.1.1.1 [110/3] via 4.4.4.4, 19:46:00, ATM0/1/1 
     2.0.0.0/32 is subnetted, 1 subnets 
O       2.2.2.2 [110/2] via 2.2.2.2, 19:46:00, ATM0/1/3 
     3.0.0.0/32 is subnetted, 1 subnets 
C       3.3.3.3 is directly connected, Loopback0 
     4.0.0.0/32 is subnetted, 1 subnets 
O       4.4.4.4 [110/2] via 4.4.4.4, 19:46:00, ATM0/1/1 
     10.0.0.0/24 is subnetted, 1 subnets 
C       10.118.1.0 is directly connected, Ethernet2/0/0 
S*   0.0.0.0/0 [1/0] via 10.118.1.21

LS1010#show tag-switching atm-tdp bindings 
 Destination: 1.1.1.1/32 
    Transit ATM0/1/3 1/33 Active -> ATM0/1/1 1/33 Active 
 Destination: 3.3.3.3/32 
    Tailend Switch ATM0/1/3 1/34 Active -> Terminating Active 
    Tailend Switch ATM0/1/1 1/34 Active -> Terminating Active 
 Destination: 4.4.4.4/32 
    Transit ATM0/1/3 1/35 Active -> ATM0/1/1 1/34 Active 
 Destination: 2.2.2.2/32 
    Transit ATM0/1/1 1/35 Active -> ATM0/1/3 1/33 Active

PE2 

Cisco7500#show ip route 
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP 
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 
       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP 
       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area 
       * - candidate default, U - per-user static route, o - ODR 
       P - periodic downloaded static route 

Gateway of last resort is not set 

     1.0.0.0/32 is subnetted, 1 subnets 
O       1.1.1.1 [110/4] via 3.3.3.3, 02:58:46, ATM3/1/0.1 
     2.0.0.0/32 is subnetted, 1 subnets 
C       2.2.2.2 is directly connected, Loopback0 
     3.0.0.0/32 is subnetted, 1 subnets 
O       3.3.3.3 [110/2] via 3.3.3.3, 02:58:46, ATM3/1/0.1 
     4.0.0.0/32 is subnetted, 1 subnets 
O       4.4.4.4 [110/3] via 3.3.3.3, 02:58:46, ATM3/1/0.1 

Cisco7500#show ip route vrf NEW 
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP 
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 
       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP 
       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area 
       * - candidate default, U - per-user static route, o - ODR 
       P - periodic downloaded static route 

Gateway of last resort is not set 

     100.0.0.0/24 is subnetted, 1 subnets 
B       100.1.1.0 [200/0] via 1.1.1.1, 01:16:13 
     110.0.0.0/24 is subnetted, 1 subnets 
C       110.1.1.0 is directly connected, FastEthernet3/0/0 
     10.0.0.0/24 is subnetted, 3 subnets 
B       10.3.3.0 [200/1] via 1.1.1.1, 01:16:13 
B       10.2.2.0 [200/1] via 1.1.1.1, 01:16:13 
B       10.1.1.0 [200/1] via 1.1.1.1, 01:16:13 
     30.0.0.0/24 is subnetted, 3 subnets 
R       30.3.3.0 [120/1] via 110.1.1.2, 00:00:16, FastEthernet3/0/0 
R       30.2.2.0 [120/1] via 110.1.1.2, 00:00:17, FastEthernet3/0/0 
R       30.1.1.0 [120/1] via 110.1.1.2, 00:00:17, FastEthernet3/0/0 

Cisco7500#show ip rip database vrf NEW 
10.0.0.0/8    auto-summary 
10.1.1.0/24    redistributed 
    [1] via 1.1.1.1, 
10.2.2.0/24    redistributed 
    [1] via 1.1.1.1, 
10.3.3.0/24    redistributed 
    [1] via 1.1.1.1, 
30.0.0.0/8    auto-summary 
30.1.1.0/24 
    [1] via 110.1.1.2, 00:00:09, FastEthernet3/0/0 
30.2.2.0/24 
    [1] via 110.1.1.2, 00:00:09, FastEthernet3/0/0 
30.3.3.0/24 
    [1] via 110.1.1.2, 00:00:09, FastEthernet3/0/0 
100.0.0.0/8    auto-summary 
100.1.1.0/24    redistributed 
    [1] via 1.1.1.1, 
110.0.0.0/8    auto-summary 
110.1.1.0/24    directly connected, FastEthernet3/0/0 
Cisco7500#show ip bgp vpnv4 vrf NEW 
BGP table version is 17, local router ID is 2.2.2.2 
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal 
Origin codes: i - IGP, e - EGP, ? - incomplete 

   Network          Next Hop            Metric LocPrf Weight Path 
Route Distinguisher: 200:1 (default for vrf NEW) 
*>i10.1.1.0/24      1.1.1.1                  1    100      0 ? 
*>i10.2.2.0/24      1.1.1.1                  1    100      0 ? 
*>i10.3.3.0/24      1.1.1.1                  1    100      0 ? 
*> 30.1.1.0/24      110.1.1.2                1         32768 ? 
*> 30.2.2.0/24      110.1.1.2                1         32768 ? 
*> 30.3.3.0/24      110.1.1.2                1         32768 ? 
*>i100.1.1.0/24     1.1.1.1                  0    100      0 ? 
*> 110.1.1.0/24     0.0.0.0                  0         32768 ? 

Cisco7500#show tag-switching interfaces 
Interface              IP    Tunnel   Operational 
ATM3/1/0.1             Yes   No       Yes         (ATM tagging) 

Cisco7500#show tag-switching interfaces detail 
Interface ATM3/1/0.1: 
        IP tagging enabled 
        TSP Tunnel tagging not enabled 
        Tagging operational 
        Tagswitching turbo vector 
        MTU = 4470 
        ATM tagging: 
                Tag VPI = 1 
                Tag VCI range = 33 - 65535 
                Control VC = 0/32 

Cisco7500#show tag-switching ? 
  atm-tdp           ATM Tagging Protocol information 
  cos-map           Show Tag CoS ATM Multi-VC CoS Map 
  forwarding-table  Show the Tag Forwarding Information Base (TFIB) 
  interfaces        Show per-interface tag switching 
  prefix-map        Show Tag CoS Prefix Map 
  tdp               Tag Distribution Protocol information

Cisco7500#show tag-switching tdp bindings 
  tib entry: 1.1.1.1/32, rev 25 
        local binding:  tag: 26 
  tib entry: 2.2.2.2/32, rev 2 
        local binding:  tag: imp-null 
  tib entry: 3.3.3.3/32, rev 27 
        local binding:  tag: 27 
  tib entry: 4.4.4.4/32, rev 29 
        local binding:  tag: 28 

Cisco7500#show tag-switching atm-tdp bindings 
 Destination: 1.1.1.1/32 
    Headend Router ATM3/1/0.1 (3 hops) 1/33  Active, VCD=8 
 Destination: 3.3.3.3/32 
    Headend Router ATM3/1/0.1 (1 hop) 1/34  Active, VCD=6 
 Destination: 4.4.4.4/32 
    Headend Router ATM3/1/0.1 (2 hops) 1/35  Active, VCD=7 
 Destination: 2.2.2.2/32 
    Tailend Router ATM3/1/0.1 1/33 Active, VCD=8 

Cisco7500#show tag-switching forwarding-table vrf NEW 
Local  Outgoing    Prefix            Bytes tag  Outgoing   Next Hop 
tag    tag or VC   or Tunnel Id      switched   interface 
33     Aggregate   110.1.1.0/24[V]   0 
34     Untagged    30.3.3.0/24[V]    0          Fa3/0/0    110.1.1.2 
35     Untagged    30.2.2.0/24[V]    0          Fa3/0/0    110.1.1.2 
36     Untagged    30.1.1.0/24[V]    0          Fa3/0/0    110.1.1.2

CE2 

Cisco7100#show ip route 
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP 
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 
       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP 
       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area 
       * - candidate default, U - per-user static route, o - ODR 
       P - periodic downloaded static route 

Gateway of last resort is not set 

     100.0.0.0/24 is subnetted, 1 subnets 
R       100.1.1.0 [120/1] via 110.1.1.1, 00:00:19, FastEthernet0/0 
     110.0.0.0/24 is subnetted, 1 subnets 
C       110.1.1.0 is directly connected, FastEthernet0/0 
     10.0.0.0/24 is subnetted, 3 subnets 
R       10.3.3.0 [120/1] via 110.1.1.1, 00:00:19, FastEthernet0/0 
R       10.2.2.0 [120/1] via 110.1.1.1, 00:00:19, FastEthernet0/0 
R       10.1.1.0 [120/1] via 110.1.1.1, 00:00:19, FastEthernet0/0 
     30.0.0.0/24 is subnetted, 3 subnets 
C       30.3.3.0 is directly connected, Loopback2 
C       30.2.2.0 is directly connected, Loopback1 
C       30.1.1.0 is directly connected, Loopback0

相關資訊

修訂記錄

修訂 發佈日期 意見
1.0
29-Nov-2001
初始版本

這份文件是否有所幫助？

Feedback意見

讓思科協助您

本文件適用於這些產品