此产品的文档集力求使用非歧视性语言。在本文档集中,非歧视性语言是指不隐含针对年龄、残障、性别、种族身份、族群身份、性取向、社会经济地位和交叉性的歧视的语言。由于产品软件的用户界面中使用的硬编码语言、基于 RFP 文档使用的语言或引用的第三方产品使用的语言,文档中可能无法确保完全使用非歧视性语言。 深入了解思科如何使用包容性语言。
思科采用人工翻译与机器翻译相结合的方式将此文档翻译成不同语言,希望全球的用户都能通过各自的语言得到支持性的内容。 请注意:即使是最好的机器翻译,其准确度也不及专业翻译人员的水平。 Cisco Systems, Inc. 对于翻译的准确性不承担任何责任,并建议您总是参考英文原始文档(已提供链接)。
本文描述要求的步骤为了替换一台有故障的脊椎交换机(连结9236C)在设置的Ultra-M主机StarOS虚拟网络作用(VNFs)。
Ultra-M是设计的一个被预先包装的和被验证的虚拟化的便携信息包核心解决方案简化VNFs的配置。 是Ultra-M设置的一部分的服务器被连接到三不同种类的交换机:
设置的Ultra-M的网络拓扑:
Note:网络拓扑是仅表示法,交换机之间的连接也许根据配置的解决方案稍有变化。
本文供熟悉Cisco Ultra-M设置和Catalyst交换机操作的Cisco人员使用。
VNF | 虚拟网络功能 |
脊椎 | 连结9236C交换机作为脊椎 |
MOP | 程序方法 |
LAN | 区域网 |
FTP | 文件传输协议 |
TFTP | 简单文件传输协议 (TFTP) |
CIMC | Cisco集成管理控制器 |
在您继续进行交换机更换前,请使用配置文件的备份从脊椎交换机的有使用的ftp/tftp。
Nexus-POD1-spine2# copy running-config sftp:
Enter destination filename: [Nexus-POD1-spine2-running-config] backup-spine-cfg-2
Enter vrf (If no input, current vrf 'default' is considered): management
Enter hostname for the sftp server: 10.1.1.1
Enter username: admin
The authenticity of host '10.1.1.1 (10.1.1.1)' can't be established.
RSA key fingerprint is SHA256:fnbUmd2mL5yE94zxrRoKAlvYfQbheXJfQox7m3XfpIU.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '10.1.1.1' (RSA) to the list of known hosts.
User Access Verification
Password:
Connected to 10.1.1.1.
sftp> put /var/tmp/vsh/backup-spine-cfg-2 backup-spine-cfg-2
Uploading /var/tmp/vsh/backup-spine-cfg-2 to /backup-spine-cfg-2
/var/tmp/vsh/backup-spine-cfg-2 100% 33KB 33.2KB/s 00:00
sftp> exit
Copy complete, now saving to disk (please wait)...
Copy complete.
Nexus-POD1-spine2#
1. 检查运行在交换机的当前软件版本并且记录下来它。
Nexus-POD1-spine2# show ver
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (C) 2002-2018, Cisco and/or its affiliates.
All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under their own
licenses, such as open source. This software is provided "as is," and unless
otherwise stated, there is no warranty, express or implied, including but not
limited to warranties of merchantability and fitness for a particular purpose.
Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or
GNU General Public License (GPL) version 3.0 or the GNU
Lesser General Public License (LGPL) Version 2.1 or
Lesser General Public License (LGPL) Version 2.0.
A copy of each such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://opensource.org/licenses/gpl-3.0.html and
http://www.opensource.org/licenses/lgpl-2.1.php and
http://www.gnu.org/licenses/old-licenses/library.txt.
Software
BIOS: version 07.59
NXOS: version 7.0(3)I7(3)
BIOS compile time: 08/26/2016
NXOS image file is: bootflash:///nxos.7.0.3.I7.3.bin
NXOS compile time: 2/12/2018 13:00:00 [02/12/2018 19:13:48]
Hardware
cisco Nexus9000 C9236C chassis
Intel(R) Xeon(R) CPU @ 1.80GHz with 16400560 kB of memory.
Processor Board ID FDO21120SSN
Device name: Nexus-POD1-spine2
bootflash: 53298520 kB
Kernel uptime is 108 day(s), 13 hour(s), 15 minute(s), 12 second(s)
Last reset
Reason: Unknown
System version: 7.0(3)I7(3)
Service:
plugin
Core Plugin, Ethernet Plugin
Active Package(s):
2. 检查当前许可证使用方法。
Nexus-POD1-spine2# show license usage
Feature Ins Lic Status Expiry Date Comments
Count
--------------------------------------------------------------------------------
N9K_LIC_1G No - Unused -
VPN_FABRIC No - Unused -
FCOE_NPV_PKG No - Unused -
SECURITY_PKG No 0 Unused -
N9K_UPG_EX_10G No - Unused -
TP_SERVICES_PKG No - Unused -
NXOS_ADVANTAGE_GF No - Unused -
NXOS_ADVANTAGE_M4 No - Unused -
NXOS_ADVANTAGE_XF No - Unused -
NXOS_ESSENTIALS_GF No - Unused -
NXOS_ESSENTIALS_M4 No - Unused -
NXOS_ESSENTIALS_XF No - Unused -
SAN_ENTERPRISE_PKG No - Unused -
PORT_ACTIVATION_PKG No 0 Unused -
NETWORK_SERVICES_PKG No - Unused -
NXOS_ADVANTAGE_M8-16 No - Unused -
NXOS_ESSENTIALS_M8-16 No - Unused -
FC_PORT_ACTIVATION_PKG No 0 Unused -
LAN_ENTERPRISE_SERVICES_PKG Yes - In use Never -
--------------------------------------------------------------------------------
3. 保证物理电缆连接到交换机Port-Channel, VLAN并且端口状态是好正如所料
Nexus-POD1-spine2# show interface status | grep connected
mgmt0 -- connected routed full 100 --
Eth1/1 -- connected trunk full 100G QSFP-100G-AOC5M
Eth1/2 -- connected trunk full 100G QSFP-100G-AOC5M
Eth1/5 -- connected trunk full 100G QSFP-100G-AOC5M
Eth1/6 -- connected trunk full 100G QSFP-100G-AOC5M
Eth1/11/1 Connected to NMNET connected 101 full 10G QSFP-40G-SR4
Eth1/21/1 -- connected routed full 10G QSFP-40G-SR4
Eth1/21/2 -- connected routed full 10G QSFP-40G-SR4
Eth1/21/3 -- connected routed full 10G QSFP-40G-SR4
Eth1/21/4 -- connected routed full 10G QSFP-40G-SR4
Eth1/22/1 -- connected routed full 10G QSFP-40G-SR4
Eth1/22/2 -- connected routed full 10G QSFP-40G-SR4
Eth1/22/3 -- connected routed full 10G QSFP-40G-SR4
Eth1/22/4 -- connected routed full 10G QSFP-40G-SR4
Eth1/23/1 -- connected routed full 10G QSFP-40G-SR4
Eth1/23/2 -- connected routed full 10G QSFP-40G-SR4
Eth1/23/3 -- connected routed full 10G QSFP-40G-SR4
Eth1/23/4 -- connected routed full 10G QSFP-40G-SR4
Eth1/29 "spine-spine link" connected trunk full 100G QSFP-100G-AOC5M
Eth1/30 "spine-spine link" connected trunk full 100G QSFP-100G-AOC5M
Eth1/31 "spine-spine link" connected trunk full 100G QSFP-100G-AOC5M
Po22 portchannel to Lea connected trunk full 100G --
Po24 portchannel to Lea connected trunk full 100G --
Po30 -- connected routed full 10G --
Po30.3201 -- connected routed full 10G --
Po30.3202 -- connected routed full 10G --
Po30.3203 -- connected routed full 10G --
Po30.3204 -- connected routed full 10G --
Po30.3205 -- connected routed full 10G --
Po30.3206 -- connected routed full 10G --
Po99 spine1-spine2 connected trunk full 100G --
Lo1 -- connected routed auto auto --
Lo2 -- connected routed auto auto --
Lo3 -- connected routed auto auto --
Lo4 -- connected routed auto auto --
Lo5 -- connected routed auto auto --
Vlan2601 Global VRF spine-2 connected routed auto auto --
Vlan2602 GI VRF spine-2 <-> connected routed auto auto --
Vlan2603 IPV6SUB VRF spine- connected routed auto auto --
Vlan2604 METROE-E VRF spine connected routed auto auto --
Vlan2605 NMNET VRF spine-2 connected routed auto auto --
Vlan2721 Global VRF spine-2 connected routed auto auto --
Vlan2722 GI VRF spine-2 <-> connected routed auto auto --
Vlan2723 IPV6SUB VRF spine- connected routed auto auto --
Vlan2724 METROE-E VRF spine connected routed auto auto --
Vlan2741 Global VRF spine-2 connected routed auto auto --
Vlan2742 GI VRF spine-2 <-> connected routed auto auto --
Vlan2743 IPV6SUB VRF spine- connected routed auto auto --
Vlan2744 METROE-E VRF spine connected routed auto auto --
4. 保证BGP邻居是UP。
Nexus-POD1-spine2# show ip bgp summary vrf all
BGP summary information for VRF GI, address family IPv4 Unicast
BGP router identifier 10.0.202.2, local AS number 65145
BGP table version is 28, IPv4 Unicast config peers 4, capable peers 4
1 network entries and 1 paths using 236 bytes of memory
BGP attribute entries [1/160], BGP AS path entries [1/6]
BGP community entries [0/0], BGP clusterlist entries [0/0]
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
10.0.92.1 4 65145 312621 312617 28 0 0 15w3d 1
10.0.122.2 4 65251 312624 312616 28 0 0 15w3d 0
10.0.142.2 4 65252 312623 312617 28 0 0 15w3d 0
10.178.240.185 4 65137 312618 312616 28 0 0 12w0d 0
BGP summary information for VRF IPV6SUB, address family IPv4 Unicast
BGP summary information for VRF METROE-E, address family IPv4 Unicast
BGP router identifier 10.0.202.4, local AS number 65145
BGP table version is 10, IPv4 Unicast config peers 4, capable peers 4
1 network entries and 1 paths using 236 bytes of memory
BGP attribute entries [1/160], BGP AS path entries [1/6]
BGP community entries [0/0], BGP clusterlist entries [0/0]
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
10.0.94.1 4 65145 312619 312617 10 0 0 15w3d 1
10.0.124.2 4 65251 312623 312616 10 0 0 15w3d 0
10.0.144.2 4 65252 312618 312617 10 0 0 15w3d 0
10.178.240.181 4 65137 312618 312616 10 0 0 12w0d 0
BGP summary information for VRF NMNET, address family IPv4 Unicast
BGP router identifier 10.0.202.5, local AS number 65145
BGP table version is 3, IPv4 Unicast config peers 1, capable peers 1
1 network entries and 1 paths using 236 bytes of memory
BGP attribute entries [1/160], BGP AS path entries [0/0]
BGP community entries [0/0], BGP clusterlist entries [0/0]
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
10.0.95.1 4 65145 312616 312616 3 0 0 15w3d 1
BGP summary information for VRF default, address family IPv4 Unicast
BGP router identifier 10.0.202.1, local AS number 65145
BGP table version is 261, IPv4 Unicast config peers 4, capable peers 3
35 network entries and 49 paths using 10108 bytes of memory
BGP attribute entries [5/800], BGP AS path entries [3/22]
BGP community entries [0/0], BGP clusterlist entries [0/0]
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
10.0.91.1 4 65145 312681 312635 261 0 0 15w3d 35
10.0.121.2 4 65251 312629 312630 261 0 0 15w3d 0
10.0.141.2 4 65252 312683 312620 261 0 0 15w3d 14
10.178.240.177 4 65137 0 124577 0 0 0 15w3d 12
Nexus-POD1-spine2# show ipv6 bgp summary vrf all
BGP summary information for VRF GI, address family IPv6 Unicast
BGP router identifier 10.0.202.2, local AS number 65145
BGP table version is 64, IPv6 Unicast config peers 4, capable peers 4
1 network entries and 1 paths using 248 bytes of memory
BGP attribute entries [1/160], BGP AS path entries [1/6]
BGP community entries [0/0], BGP clusterlist entries [0/0]
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
fc00:420:81:122::2
4 65251 312637 312629 64 0 0 15w3d 0
fc00:420:81:142::2
4 65252 312637 312630 64 0 0 15w3d 0
fc00:420:81:992::1
4 65145 312635 312630 64 0 0 15w3d 1
fd01:976a:c002:1:4d13:36f3:0:22
4 65137 312631 312627 64 0 0 12w0d 0
BGP summary information for VRF IPV6SUB, address family IPv6 Unicast
BGP router identifier 10.0.202.3, local AS number 65145
BGP table version is 44, IPv6 Unicast config peers 4, capable peers 4
0 network entries and 0 paths using 0 bytes of memory
BGP attribute entries [0/0], BGP AS path entries [0/0]
BGP community entries [0/0], BGP clusterlist entries [0/0]
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
fc00:420:81:123::2
4 65251 312632 312629 44 0 0 15w3d 0
fc00:420:81:143::2
4 65252 312636 312629 44 0 0 15w3d 0
fc00:420:81:993::1
4 65145 312631 312629 44 0 0 15w3d 0
fd01:976a:c002:1:4d13:36f3:0:24
4 65137 312629 312628 44 0 0 12w0d 0
BGP summary information for VRF METROE-E, address family IPv6 Unicast
BGP summary information for VRF NMNET, address family IPv6 Unicast
BGP summary information for VRF default, address family IPv6 Unicast
5. 保证BFD相邻状态是UP。
Nexus-POD1-spine2# show bfd neighbors vrf al
OurAddr NeighAddr LD/RD RH/RS Holdown(mult) State Int Vrf
10.0.124.1 10.0.124.2 1090519045/1090519205 Up 672(3) Up Vlan2724 METROE-E
10.0.122.1 10.0.122.2 1090519046/1090519206 Up 639(3) Up Vlan2722 GI
10.0.92.2 10.0.92.1 1090519050/1090519094 Up 585(3) Up Vlan2602 GI
10.0.95.2 10.0.95.1 1090519051/1090519095 Up 585(3) Up Vlan2605 NMNET
10.0.121.1 10.0.121.2 1090519052/1090519208 Up 639(3) Up Vlan2721 default
10.0.94.2 10.0.94.1 1090519054/1090519097 Up 585(3) Up Vlan2604 METROE-E
10.0.91.2 10.0.91.1 1090519055/0 Up N/A(3) Up Vlan2601 default
10.0.141.1 10.0.141.2 1090519056/1090519212 Up 610(3) Up Vlan2741 default
10.0.144.1 10.0.144.2 1090519057/1090519213 Up 610(3) Up Vlan2744 METROE-E
10.0.142.1 10.0.142.2 1090519059/1090519214 Up 610(3) Up Vlan2742 GI
10.178.240.182 10.178.240.181 1090519061/0 UP N/A(3) Up Po30.3202 METROE-E
10.178.240.186 10.178.240.185 1090519062/0 Up N/A(3) Up Po30.3203 GI
Nexus-POD1-spine2#
Nexus-POD1-spine2# show bfd ipv6 neighbor vrf all
OurAddr NeighAddr
LD/RD RH/RS Holdown(mult) State Int Vrf
fc00:420:81:123::1 fc00:420:81:123::2
1090519044/1090519204 Up 615(3) Up Vlan2723 IPV6SUB
fc00:420:81:122::1 fc00:420:81:122::2
1090519047/1090519207 Up 731(3) Up Vlan2722 GI
fc00:420:81:142::1 fc00:420:81:142::2
1090519048/1090519210 Up 696(3) Up Vlan2742 GI
fc00:420:81:143::1 fc00:420:81:143::2
1090519049/1090519211 Up 696(3) Up Vlan2743 IPV6SUB
fc00:420:81:993::2 fc00:420:81:993::1
1090519053/1090519096 Up 544(3) Up Vlan2603 IPV6SUB
fc00:420:81:992::2 fc00:420:81:992::1
1090519058/1090519099 Up 544(3) Up Vlan2602 GI
1. 在机架上安装新的交换机并且连接电缆到交换机如注释。交换机安装的步骤可以在此链路找到: 脊椎连结236C NX-OS模式交换机硬件安装指南
2. 检查连结脊椎交换机的软件版本并且对软件版本的升级/降级根据产生的链路这里: Cisco连结9000系列NX-OS软件升级和降级指南,版本7.x
3. 调用配置备份到新的交换机并且复制该配置到startup-config
server-backup$ sftp admin@10.1.1.1
The authenticity of host '10.1.1.1 (10.1.1.1)' can't be established.
RSA key fingerprint is SHA256:fnbUmd2mL5yE94zxrRoKAlvYfQbheXJfQox7m3XfpIU.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '10.1.1.1' (RSA) to the list of known hosts.
User Access Verification
Password:
Password:
Connected to 10.1.1.1.
sftp> ls
20170607_193430_poap_15489_1.log 20170607_193430_poap_15489_2.log 20170607_193430_poap_15489_init.log backup-spine-cfg-2 backup-spine.cfg
backup_run_02152018 bios_daemon.dbg cfg-july25th cfg-july25th-spine1 flash:
flash:cfg-aug8th-ybattina-afterNSO flash:cfg-jul28th home l3-cfg-aug10th license_FDO211406K1_16.lic
lost+found nxos.7.0.3.I4.4.bin nxos.7.0.3.I5.2.bin nxos.7.0.3.I7.3.bin platform-sdk.cmd
scripts spine-config-bkp starat virtual-instance vlan.dat 100% 33KB 21.7KB/s 00:01
sftp> put backup-spine-cfg-2
Uploading backup-spine-cfg-2 to /backup-spine-cfg-2
backup-spine-cfg-2 100% 33KB 23.5KB/s 00:01
sftp> bye
Nexus-spine1# copy bootflash:///backup-spine-cfg-2 startup-config
Copy progress 100% 33KB
Copy complete, now saving to disk (please wait)...
Copy complete.
4. 在装载备份配置以后重新载入交换机。
Nexus-POD1-spine2#reload
在交换机为访问后是可用的请执行健康检查使用下面的on命令脊椎交换机验证被替换的交换机是可用的在期望的状态。
Nexus-POD1-spine2# show port-channel summary
Nexus-POD1-spine2# show ip bgp summary vrf all
Nexus-POD1-spine2# show ipv6 bgp summary vrf all
Nexus-POD1-spine2# show bfd neighbor vrf all
Nexus-POD1-spine2# show bfd ipv6 neighbor vrf all