IOS IPSec和IKE调试 — IKEv1主模式故障排除

下载选项

PDF (220.6 KB)
在各种设备上使用 Adobe Reader 查看
ePub (87.8 KB)
在 iPhone、iPad、Android、Sony Reader 或 Windows Phone 上使用各种应用查看
Mobi (Kindle) (84.2 KB)
在 Kindle 设备上查看或在多个设备上使用 Kindle 应用查看

已更新: 2013 年 11 月 14 日

文档 ID:113594

非歧视性语言

此产品的文档集力求使用非歧视性语言。在本文档集中，非歧视性语言是指不隐含针对年龄、残障、性别、种族身份、族群身份、性取向、社会经济地位和交叉性的歧视的语言。由于产品软件的用户界面中使用的硬编码语言、基于 RFP 文档使用的语言或引用的第三方产品使用的语言，文档中可能无法确保完全使用非歧视性语言。深入了解思科如何使用包容性语言。

关于此翻译

思科采用人工翻译与机器翻译相结合的方式将此文档翻译成不同语言，希望全球的用户都能通过各自的语言得到支持性的内容。请注意：即使是最好的机器翻译，其准确度也不及专业翻译人员的水平。 Cisco Systems, Inc. 对于翻译的准确性不承担任何责任，并建议您总是参考英文原始文档（已提供链接）。

简介

本文档提供了在使用主模式和预共^享密钥(PSK)时了解Cisco IOS®软件调试的信息。

本文档还提供有关如何转换配置中某些调试行的信息。

不讨论以下主题：

在建立隧道后传递流量
IPSec或互联网密钥交换(IKE)的基本概念

核心问题

IKE和IPSec调试往往变得晦涩难懂。思科技术支持中心(TAC)经常使用这些错误来了解IPSec VPN隧道建立问题的位置。

场景

主模式通常用于LAN到LAN隧道之间，或在远程访问(ezvpn)时用于身份验证。

这些调试来自运行15.2(1)T软件版本的Cisco IOS设备。

本文档介绍了两种主要方案：

IOS启动器端
IOS响应方端

在本文档中，基于IPv6在两个站点之间建立基于VTI的隧道。

注意：

使用命令查找工具(仅注册客户)可获取有关本文档中使用的命令的详细信息。

使用 debug 命令之前，请参阅有关 Debug 命令的重要信息。

使用的调试

debug crypto isakmp
debug crypto ipsec
debug crypto kmi

IOS 路由器配置

加密配置

crypto isakmp policy 10
authentication pre-share

crypto isakmp key cisco address ipv6 ::/0

crypto ipsec transform-set TRA esp-aes esp-sha-hmac
mode transport

crypto ipsec profile PRO
set transform-set TRA

interface Tunnel23
ip address 192.168.23.2 255.255.255.0
ipv6 address FE80::23:2 link-local
tunnel source Ethernet0/0
tunnel mode ipsec ipv6
tunnel destination 2001: DB8::3
tunnel protection ipsec profile PRO

其他端

crypto isakmp policy 10
authentication pre-share

crypto isakmp key cisco address ipv6 ::/0

crypto ipsec transform-set TRA esp-aes esp-sha-hmac
mode transport

crypto ipsec profile PRO
set transform-set TRA

interface Tunnel23
ip address 192.168.23.3 255.255.255.0
ipv6 address FE80::23:3 link-local
tunnel source Ethernet0/0
tunnel mode ipsec ipv6
tunnel destination 2001: DB8::2
tunnel protection ipsec profile PRO

调试

IOS响应器端

主模式消息1(MM1)

IKE的初始建议包括：

加密
散列
Diffie-Hellman(DH)组
生命期

*Sep 21 08:33:43.377: ISAKMP (0) : received packet from 2001: DB8::2 dport 500 
   sport 500 Global (N) NEW SA
*Sep 21 08:33:43.377: ISAKMP: Created a peer struct for 2001: DB8::2, peer port
   500
*Sep 21 08:33:43.377: ISAKMP: New peer created peer = 0x8E45588 
   peer_handle = 0x8000000A
*Sep 21 08:33:43.377: ISAKMP: Locking peer struct 0x8E45588, refcount 1 for 
   crypto_isakmp_process_block
*Sep 21 08:33:43.377: ISAKMP: local port 500, remote port 500
*Sep 21 08:33:43.377: ISAKMP: (0):insert sa successfully sa = 6D12A00
*Sep 21 08:33:43.377: ISAKMP: (0):Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH
*Sep 21 08:33:43.377: ISAKMP: (0): Old State = IKE_READY  New State = IKE_R_MM1
*Sep 21 08:33:43.377: ISAKMP: (0): processing SA payload. message ID = 0
*Sep 21 08:33:43.377: ISAKMP: (0):found peer pre-shared key matching 2001: 
   DB8::2
*Sep 21 08:33:43.377: ISAKMP: (0): local preshared key found
*Sep 21 08:33:43.377: ISAKMP: Scanning profiles for xauth ...
*Sep 21 08:33:43.377: ISAKMP: (0):Checking ISAKMP transform 1 against priority 
   10 policy
*Sep 21 08:33:43.377: ISAKMP:      encryption DES-CBC
*Sep 21 08:33:43.377: ISAKMP:      hash SHA
*Sep 21 08:33:43.377: ISAKMP:      default group 1
*Sep 21 08:33:43.377: ISAKMP:      auth pre-share
*Sep 21 08:33:43.377: ISAKMP:      life type in seconds
*Sep 21 08:33:43.377: ISAKMP:      life duration (VPI) of  0x0 0x1 0x51 0x80
*Sep 21 08:33:43.377: ISAKMP: (0):atts are acceptable. Next payload is 0
*Sep 21 08:33:43.377: ISAKMP: (0):Acceptable atts:actual life: 0
*Sep 21 08:33:43.377: ISAKMP: (0):Acceptable atts:life: 0
*Sep 21 08:33:43.377: ISAKMP: (0):Fill atts in sa vpi_length:4
*Sep 21 08:33:43.377: ISAKMP: (0):Fill atts in sa life_in_seconds:86400
*Sep 21 08:33:43.377: ISAKMP: (0):Returning Actual lifetime: 86400
*Sep 21 08:33:43.377: ISAKMP: (0):: Started lifetime timer: 86400.

*Sep 21 08:33:43.377: ISAKMP: (0):Input = IKE_MESG_INTERNAL, 
   IKE_PROCESS_MAIN_MODE
*Sep 21 08:33:43.377: ISAKMP: (0): Old State = IKE_R_MM1  New State = IKE_R_MM1

相关配置：

crypto isakmp policy 10
authentication pre-share

主模式消息2(MM2) — 发送回复

*Sep 21 08:33:43.377: ISAKMP: (0): sending packet to 2001: DB8::2 my_port 500 
   peer_port 500 (R) MM_SA_SETUP
*Sep 21 08:33:43.377: ISAKMP: (0): Sending an IKE IPv6 Packet.
*Sep 21 08:33:43.377: ISAKMP: (0):Input = IKE_MESG_INTERNAL, 
   IKE_PROCESS_COMPLETE
*Sep 21 08:33:43.377: ISAKMP: (0): Old State = IKE_R_MM1  New State = IKE_R_MM2

主模式消息3(MM3)

包括：

网络地址转换(NAT)发现
DH交换部分1

*Sep 21 08:33:43.381: ISAKMP (0): received packet from 2001:DB8::2 dport 500 
   sport 500 Global (R) MM_SA_SETUP
*Sep 21 08:33:43.381: ISAKMP: (0):Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH
*Sep 21 08:33:43.381: ISAKMP: (0): Old State = IKE_R_MM2  New State = IKE_R_MM3
*Sep 21 08:33:43.381: ISAKMP: (0): processing KE payload. message ID = 0
*Sep 21 08:33:43.393: ISAKMP: (0): processing NONCE payload. message ID = 0
*Sep 21 08:33:43.393: ISAKMP: (0):found peer pre-shared key matching 2001: 
   DB8::2
*Sep 21 08:33:43.393: ISAKMP: (1011): processing vendor id payload
*Sep 21 08:33:43.393: ISAKMP: (1011): vendor ID is DPD
*Sep 21 08:33:43.393: ISAKMP: (1011): processing vendor id payload
*Sep 21 08:33:43.393: ISAKMP: (1011): speaking to another IOS box!
*Sep 21 08:33:43.393: ISAKMP: (1011): processing vendor id payload
*Sep 21 08:33:43.393: ISAKMP: (1011): vendor ID seems Unity/DPD but major 0 
   mismatch
*Sep 21 08:33:43.393: ISAKMP: (1011): vendor ID is XAUTH
*Sep 21 08:33:43.393: ISAKMP: (1011):Input = IKE_MESG_INTERNAL, 
   IKE_PROCESS_MAIN_MODE
*Sep 21 08:33:43.393: ISAKMP: (1011): Old State = IKE_R_MM3  New State = 
   IKE_R_MM3

主模式消息4(MM4)

包括：

NAT检测负载
DH交换的继续

*Sep 21 08:33:43.405: ISAKMP: (1011): sending packet to 2001: DB8::2 my_port 
   500 peer_port 500 (R) MM_KEY_EXCH
*Sep 21 08:33:43.405: ISAKMP: (1011): Sending an IKE IPv6 Packet.
*Sep 21 08:33:43.405: ISAKMP: (1011):Input = IKE_MESG_INTERNAL, 
   IKE_PROCESS_COMPLETE
*Sep 21 08:33:43.405: ISAKMP: (1011): Old State = IKE_R_MM3  New State = 
   IKE_R_MM4

主模式消息5(MM5) — 发起方发送其身份

包括：

本地身份信息
密钥

*Sep 21 08:33:43.425: ISAKMP (1011): received packet from 2001: DB8::2 dport 
   500 sport 500 Global (R) MM_KEY_EXCH
*Sep 21 08:33:43.425: ISAKMP: (1011):Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH
*Sep 21 08:33:43.425: ISAKMP: (1011): Old State = IKE_R_MM4  New State = 
   IKE_R_MM5

*Sep 21 08:33:43.425: ISAKMP: (1011): processing ID payload. message ID = 0
*Sep 21 08:33:43.425: ISAKMP (1011): ID payload
        next-payload : 8
        type         : 5
        address      : 2001: DB8::2
        protocol     : 17
        port         : 500
        length       : 24
*Sep 21 08:33:43.425: ISAKMP: (0):: peer matches *none* of the profiles
*Sep 21 08:33:43.425: ISAKMP: (1011): processing HASH payload. message ID = 0
*Sep 21 08:33:43.425: ISAKMP: (1011): processing NOTIFY INITIAL_CONTACT 
   protocol 1 spi 0, message ID = 0, sa = 0x6D12A00
*Sep 21 08:33:43.425: ISAKMP: (1011): SA authentication status: authenticated
*Sep 21 08:33:43.425: ISAKMP: (1011): SA has been authenticated with 2001: 
   DB8::2
*Sep 21 08:33:43.425: ISAKMP: (1011): SA authentication status: authenticated
*Sep 21 08:33:43.425: ISAKMP: (1011): Process initial contact, bring down 
   existing phase 1 and 2 SA's with local 2001: DB8::3 remote 2001: DB8::2 
   remote port 500
*Sep 21 08:33:43.425: ISAKMP: Trying to insert a peer 2001: DB8::3/2001: 
   DB8::2/500/,  and inserted successfully 8E45588.
*Sep 21 08:33:43.425: ISAKMP: (1011):Input = IKE_MESG_INTERNAL, 
   IKE_PROCESS_MAIN_MODE
*Sep 21 08:33:43.425: ISAKMP: (1011): Old State = IKE_R_MM5  New State = 
   IKE_R_MM5

主模式消息6(MM6) — 响应器发送其身份。第1阶段完成。

包括：

从对等体发送远程身份
有关隧道组的最终选择

*Sep 21 08:33:43.425: IPSEC(key_engine): got a queue event with 1 KMI message(s)
*Sep 21 08:33:43.425: ISAKMP: (1011): SA is doing pre-shared key authentication
   using id type ID_IPV6_ADDR
*Sep 21 08:33:43.425: ISAKMP (1011): ID payload
        next-payload : 8
        type         : 5
        address      : 2001: DB8::3
        protocol     : 17
        port         : 500
        length       : 24
*Sep 21 08:33:43.425: ISAKMP: (1011):Total payload length: 24
*Sep 21 08:33:43.425: ISAKMP: (1011): sending packet to 2001: DB8::2 my_port 
   500 peer_port 500 (R) MM_KEY_EXCH
*Sep 21 08:33:43.425: ISAKMP: (1011): Sending an IKE IPv6 Packet.
*Sep 21 08:33:43.425: ISAKMP: (1011):Input = IKE_MESG_INTERNAL, 
   IKE_PROCESS_COMPLETE
*Sep 21 08:33:43.425: ISAKMP: (1011): Old State = IKE_R_MM5  New State = 
   IKE_P1_COMPLETE

相关配置：

crypto isakmp identity ...

快速模式消息1(QM1)

*Sep 21 08:33:43.433: ISAKMP (1011): received packet from 2001: DB8::2 dport 
   500 sport 500 Global (R) QM_IDLE
*Sep 21 08:33:43.433: ISAKMP: set new node 1371333358 to QM_IDLE
*Sep 21 08:33:43.433: ISAKMP: (1011): processing HASH payload. message ID = 
   1371333358
*Sep 21 08:33:43.433: ISAKMP: (1011): processing SA payload. message ID = 
   1371333358
*Sep 21 08:33:43.433: ISAKMP: (1011):Checking IPSec proposal 1
*Sep 21 08:33:43.433: ISAKMP: transform 1, ESP_AES
*Sep 21 08:33:43.433: ISAKMP:   attributes in transform:
*Sep 21 08:33:43.433: ISAKMP:      encaps is 1 (Tunnel)
*Sep 21 08:33:43.433: ISAKMP:      SA life type in seconds
*Sep 21 08:33:43.433: ISAKMP:      SA life duration (basic) of 3600
*Sep 21 08:33:43.433: ISAKMP:      SA life type in kilobytes
*Sep 21 08:33:43.433: ISAKMP:      SA life duration (VPI) of  0x0 0x46 0x50 0x0
*Sep 21 08:33:43.433: ISAKMP:      authenticator is HMAC-SHA
*Sep 21 08:33:43.433: ISAKMP:      key length is 128
*Sep 21 08:33:43.433: ISAKMP: (1011):atts are acceptable.
*Sep 21 08:33:43.433: IPSEC(validate_proposal_request): proposal part #1
*Sep 21 08:33:43.433: IPSEC(validate_proposal_request): proposal part #1,
  (key eng. msg.) INBOUND local= 2001: DB8::3:0, remote= 2001: DB8::2:0,
    local_proxy= ::/0/256/0,
    remote_proxy= ::/0/256/0,
    protocol= ESP, transform= NONE  (Tunnel),
    lifedur= 0s and 0kb,
    spi= 0x0(0), conn_id= 0, keysize= 128, flags= 0x0
*Sep 21 08:33:43.433: ISAKMP: (1011): processing NONCE payload. message ID = 
   1371333358
*Sep 21 08:33:43.433: ISAKMP: (1011): processing ID payload. message ID = 
   1371333358
*Sep 21 08:33:43.433: ISAKMP: (1011): processing ID payload. message ID = 
   1371333358
*Sep 21 08:33:43.433: ISAKMP: (1011):QM Responder gets spi
*Sep 21 08:33:43.433: ISAKMP: (1011):Node 1371333358, Input = 
   IKE_MESG_FROM_PEER, IKE_QM_EXCH
*Sep 21 08:33:43.433: ISAKMP: (1011): Old State = IKE_QM_READY  New State = 
   IKE_QM_SPI_STARVE

相关配置：

tunnel mode ipsec ipv6

快速模式消息2(QM2)

包括：

远程端发送参数
选择了两个建议的相2寿命中较短的一个

*Sep 21 08:33:43.433: ISAKMP: (1011): sending packet to 2001: DB8::2 my_port 
   500 peer_port 500 (R) QM_IDLE
*Sep 21 08:33:43.433: ISAKMP: (1011): Sending an IKE IPv6 Packet.
*Sep 21 08:33:43.433: ISAKMP: (1011):Node 1371333358, Input = 
   IKE_MESG_INTERNAL, IKE_GOT_SPI
*Sep 21 08:33:43.433: ISAKMP: (1011): Old State = IKE_QM_SPI_STARVE  New 
   State = IKE_QM_R_QM2
*Sep 21 08:33:43.437: IPSEC(key_engine): got a queue event with 1 KMI message(s)
R3(config-if)#
*Sep 21 08:33:43.437: IPSEC(crypto_ipsec_create_ipsec_sas): Map found 
   Tunnel23-head-0
*Sep 21 08:33:43.437: IPSEC(crypto_ipsec_sa_find_ident_head): reconnecting 
   with the same proxies and peer 2001: DB8::2
*Sep 21 08:33:43.437: IPSEC(create_sa): sa created,
  (sa) sa_dest= 2001: DB8::3, sa_proto= 50,
    sa_spi= 0x221A7153(572158291),
    sa_trans= esp-aes esp-sha-hmac , sa_conn_id= 305
    sa_lifetime(k/sec)= (4608000/3532)
*Sep 21 08:33:43.437: IPSEC(create_sa): sa created,
  (sa) sa_dest= 2001: DB8::2, sa_proto= 50,
    sa_spi= 0x45F16A9A(1173449370),
    sa_trans= esp-aes esp-sha-hmac , sa_conn_id= 306
    sa_lifetime(k/sec)= (4608000/3532)

相关配置：

crypto ipsec transform-set TRA esp-aes esp-sha-hmac
mode transport
crypto ipsec profile PRO
set transform-set TRA
interface tunnel23
tunnel mode ipsec ipv6
tunnel protection ipsec profile PRO

快速模式消息3(QM3) — 第2阶段应完成并启用隧道接口

*Sep 21 08:33:43.437: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel23,
   changed state to up
*Sep 21 08:33:43.437: ISAKMP (1011): received packet from 2001: DB8::2 dport 
   500 sport 500 Global (R) QM_IDLE
*Sep 21 08:33:43.437: ISAKMP: (1011): deleting node 1371333358 error FALSE 
   reason "QM done (await)"
*Sep 21 08:33:43.437: ISAKMP: (1011):Node 1371333358, Input = 
   IKE_MESG_FROM_PEER, IKE_QM_EXCH
*Sep 21 08:33:43.437: ISAKMP: (1011): Old State = IKE_QM_R_QM2  New State = 
   IKE_QM_PHASE2_COMPLETE
*Sep 21 08:33:43.437: IPSEC(key_engine): got a queue event with 1 KMI message(s
*Sep 21 08:33:43.437: IPSEC(key_engine_enable_outbound): rec'd enable notify 
   from ISAKMP

IOS路由器 — 启动器

主模式消息1(MM1) — 初始联系人

包括：

供应商ID(VID)
容量
第1阶段建议
IKE安全关联(SA)
IPSec已为SA创建模板

*Sep 21 08:33:43.245: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is ON
*Sep 21 08:33:43.245: IPSEC(sa ident sadb root initialize created IPv6 ACL %s) 
   : Tunnel23-head-0-65537-Tunnel23-head-0-ACL-6-IPSECV6-ACL
*Sep 21 08:33:43.245: IPSEC(recalculate_mtu) : reset sadb_root 79E82A8 mtu to 
   1500
*Sep 21 08:33:43.245: IPSEC(adjust_mtu) : adjusting ident ip mtu from 1460 to 
   1500,
  (identity) local= 2001: DB8::2:0, remote= 2001: DB8::3:0,
    local_proxy= ::/0/256/0,
    remote_proxy= ::/0/256/0
*Sep 21 08:33:43.245: IPSEC(adjust_mtu): adjusting path mtu from 1460 to 1500,
  (identity) local= 2001: DB8::2:0, remote= 2001: DB8::3:0,
    local_proxy= ::/0/256/0,
    remote_proxy= ::/0/256/0
*Sep 21 08:33:43.245: IPSEC(sa_request): ,
  (key eng. msg.) OUTBOUND local= 2001: DB8::2:500, remote= 2001: DB8::3:500,
    local_proxy= ::/0/256/0,
    remote_proxy= ::/0/256/0,
    protocol= ESP, transform= esp-aes esp-sha-hmac  (Tunnel),
    lifedur= 3600s and 4608000kb,
    spi= 0x0(0), conn_id= 0, keysize= 128, flags= 0x0
*Sep 21 08:33:43.245: ISAKMP: (0): SA request profile is (NULL)
*Sep 21 08:33:43.245: ISAKMP: Created a peer struct for 2001: DB8::3, peer port
   500
*Sep 21 08:33:43.245: ISAKMP: New peer created peer = 0x9344BE8 peer_handle = 
   0x80000008
*Sep 21 08:33:43.245: ISAKMP: Locking peer struct 0x9344BE8, refcount 1 for 
   isakmp_initiator
*Sep 21 08:33:43.245: ISAKMP: local port 500, remote port 500
*Sep 21 08:33:43.245: ISAKMP: set new node 0 to QM_IDLE
*Sep 21 08:33:43.245: ISAKMP: (0):insert sa successfully sa = 944C840
*Sep 21 08:33:43.245: ISAKMP: (0):Can not start Aggressive mode, trying Main 
   mode.
*Sep 21 08:33:43.245: ISAKMP: (0):found peer pre-shared key matching 2001: 
   DB8::3
*Sep 21 08:33:43.245: ISAKMP: (0):Input = IKE_MESG_FROM_IPSEC, IKE_SA_REQ_MM
*Sep 21 08:33:43.245: ISAKMP: (0): Old State = IKE_READY  New State = IKE_I_MM1
*Sep 21 08:33:43.245: ISAKMP: (0): beginning Main Mode exchange
*Sep 21 08:33:43.245: ISAKMP: (0): sending packet to 2001: DB8::3 my_port 500 
   peer_port 500 (I) MM_NO_STATE
*Sep 21 08:33:43.245: ISAKMP: (0): Sending an IKE IPv6 Packet.

相关配置：

crypto isakmp policy 10
authentication pre-share

主模式消息2(MM2) — 回复初始联系人

包括：

对等体选择要使用的互联网安全关联和密钥管理协议(ISAKMP)策略
IKE SA

*Sep 21 08:33:43.249: ISAKMP (0): received packet from 2001: DB8::3 dport 500 
   sport 500 Global (I) MM_NO_STATE
*Sep 21 08:33:43.249: ISAKMP: (0):Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH
*Sep 21 08:33:43.249: ISAKMP: (0): Old State = IKE_I_MM1  New State = IKE_I_MM2

*Sep 21 08:33:43.249: ISAKMP: (0): processing SA payload. message ID = 0
*Sep 21 08:33:43.249: ISAKMP: (0):found peer pre-shared key matching 2001: 
   DB8::3
*Sep 21 08:33:43.249: ISAKMP: (0): local preshared key found
*Sep 21 08:33:43.249: ISAKMP : Scanning profiles for xauth ...
*Sep 21 08:33:43.249: ISAKMP: (0):Checking ISAKMP transform 1 against priority 
   10 policy
*Sep 21 08:33:43.249: ISAKMP:      encryption DES-CBC
*Sep 21 08:33:43.249: ISAKMP:      hash SHA
*Sep 21 08:33:43.249: ISAKMP:      default group 1
*Sep 21 08:33:43.249: ISAKMP:      auth pre-share
*Sep 21 08:33:43.249: ISAKMP:      life type in seconds
*Sep 21 08:33:43.249: ISAKMP:      life duration (VPI) of  0x0 0x1 0x51 0x80
*Sep 21 08:33:43.249: ISAKMP: (0):atts are acceptable. Next payload is 0
*Sep 21 08:33:43.249: ISAKMP: (0):Acceptable atts:actual life: 0
*Sep 21 08:33:43.249: ISAKMP: (0):Acceptable atts:life: 0
*Sep 21 08:33:43.249: ISAKMP: (0):Fill atts in sa vpi_length:4
*Sep 21 08:33:43.249: ISAKMP: (0):Fill atts in sa life_in_seconds:86400
*Sep 21 08:33:43.249: ISAKMP: (0):Returning Actual lifetime: 86400
*Sep 21 08:33:43.249: ISAKMP: (0):: Started lifetime timer: 86400.

*Sep 21 08:33:43.249: ISAKMP: (0):Input = IKE_MESG_INTERNAL, 
   IKE_PROCESS_MAIN_MODE
*Sep 21 08:33:43.249: ISAKMP: (0): Old State = IKE_I_MM2  New State = 
   IKE_I_MM2

主模式消息3(MM3)- NAT发现和Diffie-Hellman交换

包括：

NAT发现负载和散列
DH交换启动
失效对等体检测(DPD)支持

*Sep 21 08:33:43.249: ISAKMP: (0): sending packet to 2001: DB8::3 my_port 500 
   peer_port 500 (I) MM_SA_SETUP
*Sep 21 08:33:43.249: ISAKMP: (0): Sending an IKE IPv6 Packet.
*Sep 21 08:33:43.249: ISAKMP: (0):Input = IKE_MESG_INTERNAL, 
   IKE_PROCESS_COMPLETE
*Sep 21 08:33:43.249: ISAKMP: (0): Old State = IKE_I_MM2  New State = IKE_I_MM3

主模式消息4(MM4)- NAT发现和Diffie-Hellman交换

包括：

NAT发现负载
DH交换启动
其他VID（DPD、Unity支持）
了解与其他IOS设备通话

*Sep 21 08:33:43.273: ISAKMP (0): received packet from 2001: DB8::3 dport 500 
   sport 500 Global (I) MM_SA_SETUP
*Sep 21 08:33:43.273: ISAKMP: (0):Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH
*Sep 21 08:33:43.273: ISAKMP: (0): Old State = IKE_I_MM3  New State = IKE_I_MM4

*Sep 21 08:33:43.273: ISAKMP: (0): processing KE payload. message ID = 0
*Sep 21 08:33:43.281: ISAKMP: (0): processing NONCE payload. message ID = 0
*Sep 21 08:33:43.281: ISAKMP: (0):found peer pre-shared key matching 2001: 
   DB8::3
*Sep 21 08:33:43.281: ISAKMP: (1011): processing vendor id payload
*Sep 21 08:33:43.281: ISAKMP: (1011): vendor ID is Unity
*Sep 21 08:33:43.281: ISAKMP: (1011): processing vendor id payload
*Sep 21 08:33:43.281: ISAKMP: (1011): vendor ID is DPD
*Sep 21 08:33:43.281: ISAKMP: (1011): processing vendor id payload
*Sep 21 08:33:43.281: ISAKMP: (1011): speaking to another IOS box!
*Sep 21 08:33:43.281: ISAKMP: (1011):Input = IKE_MESG_INTERNAL, 
   IKE_PROCESS_MAIN_MODE
*Sep 21 08:33:43.281: ISAKMP: (1011): Old State = IKE_I_MM4  New State = 
   IKE_I_MM4

主模式消息5(MM5) — 发送身份

包括：

远程对等体身份(ID)

*Sep 21 08:33:43.293: ISAKMP: (1011): Send initial contact
*Sep 21 08:33:43.293: ISAKMP: (1011): SA is doing pre-shared key authentication
   using id type ID_IPV6_ADDR
*Sep 21 08:33:43.293: ISAKMP (1011): ID payload
        next-payload : 8
        type         : 5
        address      : 2001: DB8::2
        protocol     : 17
        port         : 500
        length       : 24
*Sep 21 08:33:43.293: ISAKMP: (1011):Total payload length: 24
*Sep 21 08:33:43.293: ISAKMP: (1011): sending packet to 2001: DB8::3 my_port 
   500 peer_port 500 (I) MM_KEY_EXCH
*Sep 21 08:33:43.293: ISAKMP: (1011): Sending an IKE IPv6 Packet.
*Sep 21 08:33:43.293: ISAKMP: (1011):Input = IKE_MESG_INTERNAL, 
   IKE_PROCESS_COMPLETE
*Sep 21 08:33:43.293: ISAKMP: (1011): Old State = IKE_I_MM4  New State = 
   IKE_I_MM5

相关配置：

crypto isakmp identity ...

主模式消息6(MM6) — 远程对等体身份，已建立第1阶段

包括：

重新键入时间开始
远程身份（本例中为地址）
决定降落在简档上

*Sep 21 08:33:43.297: ISAKMP (1011): received packet from 2001: DB8::3 dport 
   500 sport 500 Global (I) MM_KEY_EXCH
*Sep 21 08:33:43.297: ISAKMP: (1011): processing ID payload. message ID = 0
*Sep 21 08:33:43.297: ISAKMP (1011): ID payload
        next-payload : 8
        type         : 5
        address      : 2001: DB8::3
        protocol     : 17
        port         : 500
        length       : 24
*Sep 21 08:33:43.297: ISAKMP: (0):: peer matches *none* of the profiles
*Sep 21 08:33:43.297: ISAKMP: (1011): processing HASH payload. message ID = 0
*Sep 21 08:33:43.297: ISAKMP: (1011): SA authentication status: authenticated
*Sep 21 08:33:43.297: ISAKMP: (1011): SA has been authenticated with 2001: 
   DB8::3
*Sep 21 08:33:43.297: ISAKMP: Trying to insert a peer 2001: DB8::2/2001: 
   DB8::3/500/,  and inserted successfully 9344BE8.
*Sep 21 08:33:43.297: ISAKMP: (1011):Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH
*Sep 21 08:33:43.297: ISAKMP: (1011): Old State = IKE_I_MM5  New State = 
   IKE_I_MM6

*Sep 21 08:33:43.297: ISAKMP: (1011):Input = IKE_MESG_INTERNAL, 
   IKE_PROCESS_MAIN_MODE
*Sep 21 08:33:43.297: ISAKMP: (1011): Old State = IKE_I_MM6  New State = 
   IKE_I_MM6

*Sep 21 08:33:43.301: ISAKMP: (1011):Input = IKE_MESG_INTERNAL, 
   IKE_PROCESS_COMPLETE
*Sep 21 08:33:43.301: ISAKMP: (1011): Old State = IKE_I_MM6  New State = 
   IKE_P1_COMPLETE

相关配置：

crypto isakmp identity ...

快速模式消息1(QM1) — 对等体启动阶段2

包括：

远程和本地代理ID
转换集

*Sep 21 08:33:43.301: ISAKMP: (1011):beginning Quick Mode exchange, M-ID of 
   1371333358*Sep 21 08:33:43.301: ISAKMP: (1011):QM Initiator gets spi
*Sep 21 08:33:43.301: ISAKMP: (1011): sending packet to 2001: DB8::3 my_port 
   500 peer_port 500 (I) QM_IDLE
*Sep 21 08:33:43.301: ISAKMP: (1011): Sending an IKE IPv6 Packet.
*Sep 21 08:33:43.301: ISAKMP: (1011):Node 1371333358, Input = 
   IKE_MESG_INTERNAL, IKE_INIT_QM
*Sep 21 08:33:43.301: ISAKMP: (1011): Old State = IKE_QM_READY  New State = 
   IKE_QM_I_QM1
*Sep 21 08:33:43.301: ISAKMP: (1011):Input = IKE_MESG_INTERNAL, 
   IKE_PHASE1_COMPLETE
*Sep 21 08:33:43.301: ISAKMP: (1011): Old State = IKE_P1_COMPLETE  New State = 
   IKE_P1_COMPLETE

相关配置：

crypto ipsec transform-set TRA esp-aes esp-sha-hmac
mode transport

crypto ipsec profile PRO
set transform-set TRA

快速模式消息2(QM2)

包括：

确认代理身份
隧道类型
完全转发保密(PFS)设置

*Sep 21 08:33:43.305: ISAKMP (1011): received packet from 2001: DB8::3 dport 
   500 sport 500 Global (I) QM_IDLE
*Sep 21 08:33:43.305: ISAKMP: (1011): processing HASH payload. message ID = 
   1371333358
*Sep 21 08:33:43.305: ISAKMP: (1011): processing SA payload. message ID = 
   1371333358
*Sep 21 08:33:43.305: ISAKMP: (1011):Checking IPSec proposal 1
*Sep 21 08:33:43.305: ISAKMP: transform 1, ESP_AES
*Sep 21 08:33:43.305: ISAKMP:   attributes in transform:
*Sep 21 08:33:43.305: ISAKMP:      encaps is 1 (Tunnel)
*Sep 21 08:33:43.305: ISAKMP:      SA life type in seconds
*Sep 21 08:33:43.305: ISAKMP:      SA life duration (basic) of 3600
*Sep 21 08:33:43.305: ISAKMP:      SA life type in kilobytes
*Sep 21 08:33:43.305: ISAKMP:      SA life duration (VPI) of  0x0 0x46 0x50 0x0
*Sep 21 08:33:43.305: ISAKMP:      authenticator is HMAC-SHA
*Sep 21 08:33:43.305: ISAKMP:      key length is 128
*Sep 21 08:33:43.305: ISAKMP: (1011):atts are acceptable.
*Sep 21 08:33:43.305: IPSEC(validate_proposal_request): proposal part #1
*Sep 21 08:33:43.305: IPSEC(validate_proposal_request): proposal part #1,
  (key eng. msg.) INBOUND local= 2001: DB8::2:0, remote= 2001: DB8::3:0,
    local_proxy= ::/0/256/0,
    remote_proxy= ::/0/256/0,
    protocol= ESP, transform= NONE  (Tunnel),
    lifedur= 0s and 0kb,
    spi= 0x0(0), conn_id= 0, keysize= 128, flags= 0x0
*Sep 21 08:33:43.305: ISAKMP: (1011): processing NONCE payload. message ID = 
   1371333358
*Sep 21 08:33:43.305: ISAKMP: (1011): processing ID payload. message ID = 
   1371333358
*Sep 21 08:33:43.305: ISAKMP: (1011): processing ID payload. message ID = 
   1371333358

相关配置：

crypto ipsec transform-set TRA esp-aes esp-sha-hmac
mode transport

crypto ipsec profile PRO
set transform-set TRA

interface tunnel23
tunnel mode ipsec ipv6
tunnel protection ipsec profile PRO

快速模式消息3(QM3) — 第2阶段建立

包括：

设置安全策略索引(SPI)以传递流量

*Sep 21 08:33:43.305: ISAKMP: (1011): Sending an IKE IPv6 Packet.
*Sep 21 08:33:43.305: ISAKMP: (1011): deleting node 1371333358 error FALSE 
   reason "No Error"
*Sep 21 08:33:43.305: ISAKMP: (1011):Node 1371333358, Input = 
   IKE_MESG_FROM_PEER, IKE_QM_EXCH
*Sep 21 08:33:43.305: ISAKMP: (1011): Old State = IKE_QM_I_QM1  New State = 
   IKE_QM_PHASE2_COMPLETE
*Sep 21 08:33:43.305: IPSEC(key_engine): got a queue event with 1 KMI message(s)
*Sep 21 08:33:43.305: IPSEC(crypto_ipsec_create_ipsec_sas): Map found 
   Tunnel23-head-0
*Sep 21 08:33:43.305: IPSEC(crypto_ipsec_sa_find_ident_head): reconnecting 
   with the same proxies and peer 2001: DB8::3
*Sep 21 08:33:43.305: IPSEC(create_sa): sa created,
  (sa) sa_dest= 2001: DB8::2, sa_proto= 50,
    sa_spi= 0x45F16A9A(1173449370),
    sa_trans= esp-aes esp-sha-hmac , sa_conn_id= 305
    sa_lifetime(k/sec)= (4608000/3439)
*Sep 21 08:33:43.305: IPSEC(create_sa): sa created,
  (sa) sa_dest= 2001: DB8::3, sa_proto= 50,
    sa_spi= 0x221A7153(572158291),
    sa_trans= esp-aes esp-sha-hmac , sa_conn_id= 306
    sa_lifetime(k/sec)= (4608000/3439)
R2(config-if)#
*Sep 21 08:33:43.309: %LINEPROTO-5-UPDOWN: Line protocol on Interface 
   Tunnel23, changed state to up

隧道验证

sh crypto ipsec sa

interface: Tunnel23
    Crypto map tag: Tunnel23-head-0, local addr 2001: DB8::2

   protected vrf: (none)
   local  ident (addr/mask/prot/port): (::/0/0/0)
   remote ident (addr/mask/prot/port): (::/0/0/0)
   current_peer 2001: DB8::3 port 500
     PERMIT, flags={origin_is_acl,}
    #pkts encaps: 4, #pkts encrypt: 4, #pkts digest: 4
    #pkts decaps: 4, #pkts decrypt: 4, #pkts verify: 4
    #pkts compressed: 0, #pkts decompressed: 0
    #pkts not compressed: 0, #pkts compr. failed: 0
    #pkts not decompressed: 0, #pkts decompress failed: 0
    #send errors 0, #recv errors 0

     local crypto endpt.: 2001: DB8::2,
     remote crypto endpt.: 2001: DB8::3
     path mtu 1500, ipv6 mtu 1500, ipv6 mtu idb Ethernet0/0
     current outbound spi: 0x221A7153(572158291)
     PFS (Y/N): N, DH group: none

     inbound esp sas:
      spi: 0x45F16A9A(1173449370)
        transform: esp-aes esp-sha-hmac ,
        in use settings ={Tunnel, }
        conn id: 305, flow_id: SW:305, sibling_flags 80000041, crypto map: 
           Tunnel23-head-0
        sa timing: remaining key lifetime (k/sec): (4183789/3408)
        IV size: 16 bytes
        replay detection support: Y
        Status: ACTIVE

     inbound ah sas:

     inbound pcp sas:

     outbound esp sas:
      spi: 0x221A7153(572158291)
        transform: esp-aes esp-sha-hmac ,
        in use settings ={Tunnel, }
        conn id: 306, flow_id: SW:306, sibling_flags 80000041, crypto map: 
           Tunnel23-head-0
        sa timing: remaining key lifetime (k/sec): (4183790/3408)
        IV size: 16 bytes
        replay detection support: Y
        Status: ACTIVE

R2(config-if)#do ping fe80::23:3
Output Interface: tunnel23
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to FE80::23:3, timeout is 2 seconds:
Packet sent with a source address of FE80::23:2%Tunnel23
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 8/11/20 ms
R2(config-if)#do sh crypto ipsec sa | i caps|ident
   local  ident (addr/mask/prot/port): (::/0/0/0)
   remote ident (addr/mask/prot/port): (::/0/0/0)
    #pkts encaps: 9, #pkts encrypt: 9, #pkts digest: 9
    #pkts decaps: 9, #pkts decrypt: 9, #pkts verify: 9

隧道已启用并正在传递流量。

IOS IPSec和IKE调试 — IKEv1主模式故障排除

下载选项

非歧视性语言

关于此翻译

目录

简介

核心问题

场景

使用的调试

IOS 路由器配置

加密配置

其他端

调试

IOS响应器端

主模式消息1(MM1)

主模式消息2(MM2) — 发送回复

主模式消息3(MM3)

主模式消息4(MM4)

主模式消息5(MM5) — 发起方发送其身份

主模式消息6(MM6) — 响应器发送其身份。第1阶段完成。

快速模式消息1(QM1)

快速模式消息2(QM2)

快速模式消息3(QM3) — 第2阶段应完成并启用隧道接口

IOS路由器 — 启动器

主模式消息1(MM1) — 初始联系人

主模式消息2(MM2) — 回复初始联系人

主模式消息3(MM3)- NAT发现和Diffie-Hellman交换

主模式消息4(MM4)- NAT发现和Diffie-Hellman交换

主模式消息5(MM5) — 发送身份

主模式消息6(MM6) — 远程对等体身份，已建立第1阶段

快速模式消息1(QM1) — 对等体启动阶段2

快速模式消息2(QM2)

快速模式消息3(QM3) — 第2阶段建立

隧道验证

相关信息

修订历史记录

由思科工程师提供

此文档是否有帮助?

联系我们

本文档适用于以下产品