CUSP配置示例

下载选项

PDF (3.9 MB)
在各种设备上使用 Adobe Reader 查看
ePub (3.5 MB)
在 iPhone、iPad、Android、Sony Reader 或 Windows Phone 上使用各种应用查看
Mobi (Kindle) (1.4 MB)
在 Kindle 设备上查看或在多个设备上使用 Kindle 应用查看

已更新: 2013 年 8 月 6 日

文档 ID:116252

非歧视性语言

此产品的文档集力求使用非歧视性语言。在本文档集中，非歧视性语言是指不隐含针对年龄、残障、性别、种族身份、族群身份、性取向、社会经济地位和交叉性的歧视的语言。由于产品软件的用户界面中使用的硬编码语言、基于 RFP 文档使用的语言或引用的第三方产品使用的语言，文档中可能无法确保完全使用非歧视性语言。深入了解思科如何使用包容性语言。

关于此翻译

思科采用人工翻译与机器翻译相结合的方式将此文档翻译成不同语言，希望全球的用户都能通过各自的语言得到支持性的内容。请注意：即使是最好的机器翻译，其准确度也不及专业翻译人员的水平。 Cisco Systems, Inc. 对于翻译的准确性不承担任何责任，并建议您总是参考英文原始文档（已提供链接）。

简介

本文档介绍思科统一SIP代理(CUSP)的示例CLI和GUI配置，其中调试与四种不同的呼叫路由方案匹配。

先决条件

要求

Cisco 建议您具有以下主题的基础知识：

会话初始协议 (SIP)
思科统一SIP代理(CUSP)

使用的组件

本文档中的信息基于CUSP。

本文档中的信息都是基于特定实验室环境中的设备编写的。本文档中使用的所有设备最初均采用原始（默认）配置。如果您使用的是真实网络，请确保您已经了解所有命令的潜在影响。

配置

本节介绍四种呼叫路由方案的配置。

注意：使用命令查找工具（仅限注册用户）可获取有关本部分所使用命令的详细信息。

场景 1

呼叫流:IP电话1 — CME — SIP — CUSP — SIP — CUCM — IP电话2

从注册到CallManager Express(CME)的IP电话1拨打408 202 2102，以便通过CUSP访问注册到Cisco Unified Communications Manager(CUCM)的IP电话2。

CME在此场景中充当公共交换电话网络(PSTN)。

SIP邀请从CME进入CUSP。

[DsTransportListener-2] DEBUG 2013.02.27 19:15:59:245 DsSipLlApi.Wire - 
Received UDP packet on 14.128.100.169:5060 ,source 14.128.100.150:57878
INVITE sip:4082022102@14.128.100.169:5060 SIP/2.0
Via: SIP/2.0/UDP 14.128.100.150:5060;branch=z9hG4bK21F2555
Remote-Party-ID: "4082025555" <sip:4082025555@14.128.100.150>;
party=calling;screen=yes;privacy=off
From: "4082025555" <sip:4082025555@14.128.100.150>;tag=81D7430C-1D2
To: <sip:4082022102@14.128.100.169>
Date: Wed, 27 Feb 2013 19:15:59 GMT
Call-ID: F3E5F396-804811E2-9818EC62-1B7185EE@14.128.100.150
Supported: 100rel,timer,resource-priority,replaces,sdp-anat
Min-SE:  1800
Cisco-Guid: 4091813662-2152206818-2551376994-0460424686
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER,
SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Timestamp: 1361992559
Contact: <sip:4082025555@14.128.100.150:5060>
Expires: 180
Allow-Events: telephone-event
Max-Forwards: 69
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 410

v=0
o=CiscoSystemsSIP-GW-UserAgent 1007 629 IN IP4 14.128.100.150
s=SIP Call
c=IN IP4 14.128.100.150
t=0 0
m=audio 16930 RTP/AVP 18 101
c=IN IP4 14.128.100.150
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
m=video 17954 RTP/AVP 97
c=IN IP4 14.128.100.150
b=TIAS:1000000
a=rtpmap:97 H264/90000
a=fmtp:97 profile-level-id=42801E;packetization-mode=0

--- end of packet ---

呼叫被接受到匹配的网络(Net-PSTN)配置。

CLI

sip listen Net-PSTN udp 14.128.100.169 5060

 !
sip network Net-PSTN standard
  no non-invite-provisional
 allow-connections
 retransmit-count invite-client-transaction 3
  retransmit-count invite-server-transaction 5
 retransmit-count non-invite-client-transaction 3
  retransmit-timer T1 500
  retransmit-timer T2 4000
  retransmit-timer T4 5000
  retransmit-timer TU1 5000
  retransmit-timer TU2 32000
  retransmit-timer clientTn 64000
  retransmit-timer serverTn 64000
  tcp connection-setup-timeout 1000
  udp max-datagram-size 1500
  end network
!

GUI

调试

[REQUESTI.12] DEBUG 2013.02.27 19:15:59:250 
conditions.RegexCondition - inNetwork='Net-PSTN'
[REQUESTI.12] DEBUG 2013.02.27 19:15:59:250 
conditions.RegexCondition - IN_NETWORK: Net-PSTN

执行预规范化序列。

CLI

trigger pre-normalization sequence 1 policy CUCM-Prefix-408
condition TC-from-CUCM

GUI

调试

[REQUESTI.12] DEBUG 2013.02.27 19:15:59:250 util.Normalization - 
Entering Normalization(moduleRequest:pre-normalize)
[REQUESTI.12] DEBUG 2013.02.27 19:15:59:250 conditions.RegexCondition - 
inNetwork='Net-PSTN'
[REQUESTI.12] DEBUG 2013.02.27 19:15:59:250 conditions.RegexCondition - 
IN_NETWORK: Net-PSTN
[REQUESTI.12] DEBUG 2013.02.27 19:15:59:250 conditions.AbstractRegexCondition -
pattern(^\QNet-CUCM\E$), toMatch(Net-PSTN) returning false
[REQUESTI.12] INFO  2013.02.27 19:15:59:250 util.Normalization - 
skipping pre-normalize, due to either no trigger is configured or triggers 
did not evaluate to true or is configured to by-pass

触发器条件(TC-from-PSTN)匹配。

CLI

!
trigger condition TC-from-PSTN
 sequence 1 
  in-network ^\QNet-PSTN\E$
  end sequence
 end trigger condition
!

GUI

调试

[REQUESTI.12] DEBUG 2013.02.27 19:15:59:250 conditions.RegexCondition - 
inNetwork='Net-PSTN'
[REQUESTI.12] DEBUG 2013.02.27 19:15:59:250 conditions.RegexCondition - 
IN_NETWORK: Net-PSTN
[REQUESTI.12] DEBUG 2013.02.27 19:15:59:250 conditions.AbstractRegexCondition -
pattern(^\QNet-PSTN\E$), toMatch(Net-PSTN) returning true

选中路由触发器配置以查找基于触发条件(TC-from-PSTN)匹配的路由策略（策略到CUCM）。

CLI

trigger routing sequence 1 policy Policy-to-CUCM condition TC-from-PSTN

GUI

调试

[REQUESTI.12] DEBUG 2013.02.27 19:15:59:251 triggers.ModuleTrigger - 
ModuleTrigger.eval() action<Policy-to-CUCM> actionParameter<>
[REQUESTI.12] DEBUG 2013.02.27 19:15:59:251 triggers.ModuleTrigger - 
ModuleTrigger.eval() got the policy, executing it ...

检查路由策略（策略到CUCM）配置以查找匹配的路由表(RT-CUCM)。

CLI

!
policy lookup Policy-to-CUCM
 sequence 100 RT-CUCM request-uri uri-component user
  modify-key 4082022102 1111
  rule exact
  end sequence
 end policy
!

GUI

调试

[REQUESTI.12] DEBUG 2013.02.27 19:15:59:251 nrs.XCLPrefix - 
Entering getKeyValue()
[REQUESTI.12] DEBUG 2013.02.27 19:15:59:251 nrs.FieldSelector - 
getUriPart: URI - sip:4082022102@14.128.100.169:5060 part 6
[REQUESTI.12] DEBUG 2013.02.27 19:15:59:251 nrs.FieldSelector - 
Requested field 45
[REQUESTI.12] DEBUG 2013.02.27 19:15:59:251 nrs.FieldSelector -
 Returning key 4082022102
[REQUESTI.12] DEBUG 2013.02.27 19:15:59:251 nrs.FieldSelector -
 Retrieved Modifier  RegexModifier: match= 4082022102, replace= 
1111, ignore case= false
[REQUESTI.12] DEBUG 2013.02.27 19:15:59:251 nrs.FieldSelector - 
Input field: 4082022102
[REQUESTI.12] DEBUG 2013.02.27 19:15:59:251 nrs.FieldSelector -
 Modified field: 1111
[REQUESTI.12] DEBUG 2013.02.27 19:15:59:252 nrs.XCLPrefix - 
Leaving getKeyValue()
[REQUESTI.12] DEBUG 2013.02.27 19:15:59:252 modules.XCLLookup -
 table=RT-CUCM, key=1111
[REQUESTI.12] INFO  2013.02.27 19:15:59:252 modules.XCLLookup -
 table is RT-CUCM

检查路由表(RT-CUCM)配置以查找目标目标(SG-CUCM.ajeet.com)。

CLI

!
route table RT-CUCM 
 key 1111 target-destination SG-CUCM.ajeet.com Net-CUCM
 end route table
!

GUI

调试

[REQUESTI.12] DEBUG 2013.02.27 19:15:59:252 routingtables.RoutingTable - 
Entering lookup()
[REQUESTI.12] DEBUG 2013.02.27 19:15:59:252 routingtables.RoutingTable - 
Looking up 1111 in table RT-CUCM with rule exact and modifiers=none
[REQUESTI.12] DEBUG 2013.02.27 19:15:59:252 routingtables.RoutingTable - 
Entering applyModifiers()
[REQUESTI.12] DEBUG 2013.02.27 19:15:59:252 routingtables.RoutingTable - 
Leaving applyModifiers(), returning 1111
[REQUESTI.12] DEBUG 2013.02.27 19:15:59:252 routingtables.RoutingTable - 
Leaving lookup()
[REQUESTI.12] INFO  2013.02.27 19:15:59:252 nrs.XCLPrefix - 
NRS Routing decision is: RouteTable:RT-CUCM, RouteKey:1111, 
TargetDestination:SG-CUCM.ajeet.com, Network:Net-CUCM
[REQUESTI.12] DEBUG 2013.02.27 19:15:59:252 loadbalancer.LBFactory - 
Entering createLoadBalancer()
[REQUESTI.12] INFO  2013.02.27 19:15:59:252 loadbalancer.LBFactory - 
lbtype is 3(call-id)
[REQUESTI.12] DEBUG 2013.02.27 19:15:59:252 loadbalancer.LBFactory - 
Leaving createLoadBalancer()
[REQUESTI.12] DEBUG 2013.02.27 19:15:59:252 nrs.XCLPrefix - 
Stored NRSAlgResult=isFound=true, isFailure=false, Response=-1, 
Routes=[Ruri: SG-CUCM.ajeet.com, Route: null, Network: Net-CUCM, 
q-value=1.0radvance=[502, 503]], PolicyAdvance=null
[REQUESTI.12] DEBUG 2013.02.27 19:15:59:252 nrs.NRSAlgResult -
set policyAdvance as specified in route=RouteTable:RT-CUCM, RouteKey:1111, 
TargetDestination:SG-CUCM.ajeet.com, Network:Net-CUCM
[REQUESTI.12] DEBUG 2013.02.27 19:15:59:252 nrs.NRSAlgResult - 
no policyAdvance specified in route
[REQUESTI.12] DEBUG 2013.02.27 19:15:59:253 nrs.NRSAlgResult - 
set policyAdvance as specified in algorithm={lookupkeymodifier=
[ RegexModifier: match= 4082022102, replace= 1111, ignore case= false], 
lookuprule=0, lookupfield=45, lookuplenght=-1, lookuptable=RT-CUCM, 
sequence=100, algorithm=1}
[REQUESTI.12] DEBUG 2013.02.27 19:15:59:253 nrs.NRSAlgResult - 
no policyAdvance specified in algorithm

执行后规范化序列。

注意：此方案不使用后规范化，这就是调试中跳过后规范化的原因。

CLI

trigger post-normalization sequence 1 policy
UC520-Four-to-Full condition TC-UC520-to-PSTN

GUI

调试

[REQUESTI.12] DEBUG 2013.02.27 19:15:59:254 util.Normalization - 
Entering Normalization(moduleRequest:post-normalize)
[REQUESTI.12] DEBUG 2013.02.27 19:15:59:254 conditions.RegexCondition - 
inNetwork='Net-PSTN'
[REQUESTI.12] DEBUG 2013.02.27 19:15:59:254 conditions.RegexCondition - 
IN_NETWORK: Net-PSTN
[REQUESTI.12] DEBUG 2013.02.27 19:15:59:254 conditions.AbstractRegexCondition -
pattern(^\QNet-From-UC520\E$), toMatch(Net-PSTN) returning false
[REQUESTI.12] INFO  2013.02.27 19:15:59:254 util.Normalization -
skipping post-normalize, due to either no trigger is configured or triggers 
did not evaluate to true or is configured to by-pass

检查服务器组配置以查找元素IP地址，并根据Q值和权重配置将呼叫路由到可能的最佳路由。

CLI

!
server-group sip group SG-CUCM.ajeet.com Net-CUCM 
 element ip-address 14.128.64.191 5060 udp q-value 1 weight 50 
 element ip-address 14.128.64.192 5060 udp q-value 1.0 weight 100 
 failover-resp-codes 503
 lbtype global
 ping
 end server-group
!

GUI

调试

[REQUESTI.12] DEBUG 2013.02.27 19:15:59:254 loadbalancer.LBFactory - 
Entering createLoadBalancer()
[REQUESTI.12] INFO  2013.02.27 19:15:59:254 loadbalancer.LBFactory - 
lbtype is 0(global)
[REQUESTI.12] INFO  2013.02.27 19:15:59:254 loadbalancer.LBFactory - 
Default lbtype is 3(call-id)
[REQUESTI.12] DEBUG 2013.02.27 19:15:59:254 loadbalancer.LBFactory - 
Leaving createLoadBalancer()
[REQUESTI.12] DEBUG 2013.02.27 19:15:59:254 loadbalancer.LBBase - 
Entering getServer()
[REQUESTI.12] DEBUG 2013.02.27 19:15:59:254 loadbalancer.LBBase - 
Entering initializeDomains()
[REQUESTI.12] DEBUG 2013.02.27 19:15:59:254 servergroups.
ServerGlobalStateWrapper - Net-CUCM:14.128.64.191:5060:1 
numTries=2--->isServerAvailable(): true
[REQUESTI.12] DEBUG 2013.02.27 19:15:59:254 servergroups.
ServerGlobalStateWrapper - Net-CUCM:14.128.64.192:5060:1 
numTries=2--->isServerAvailable(): true
[REQUESTI.12] DEBUG 2013.02.27 19:15:59:255 servergroups.AbstractNextHop -
Entering compareDomainNames()
[REQUESTI.12] DEBUG 2013.02.27 19:15:59:255 servergroups.AbstractNextHop -
Leaving compareDomainNames()
[REQUESTI.12] DEBUG 2013.02.27 19:15:59:255 loadbalancer.LBBase - 
Leaving initializeDomains()
[REQUESTI.12] INFO  2013.02.27 19:15:59:255 loadbalancer.LBHashBased - 
list of elements in order on which load balancing is done : 
{reSgElementWeight=50, reSgElementSgName=SG-CUCM.ajeet.com, 
reSgElementTransport=UDP, reSgElementQValue=1.0, reSgElementPort=5060, 
reSgElementHost=14.128.64.191}, {reSgElementWeight=100, reSgElementSgName=
SG-CUCM.ajeet.com, reSgElementTransport=UDP, reSgElementQValue=1.0, 
reSgElementPort=5060, reSgElementHost=14.128.64.192},
 [REQUESTI.12] INFO  2013.02.27 19:15:59:255 loadbalancer.LBHashBased - 
Hashing on F3E5F396-804811E2-9818EC62-1B7185EE@14.128.100.150
[REQUESTI.12] DEBUG 2013.02.27 19:15:59:255 loadbalancer.DsHashAlgorithm - 
Entering selectIndex()
[REQUESTI.12] DEBUG 2013.02.27 19:15:59:255 loadbalancer.DsHashAlgorithm - 
Leaving selectIndex()
[REQUESTI.12] INFO  2013.02.27 19:15:59:255 loadbalancer.LBHashBased - 
Index selected 0
[REQUESTI.12] DEBUG 2013.02.27 19:15:59:255 servergroups.AbstractNextHop - 
Entering compareDomainNames()
[REQUESTI.12] DEBUG 2013.02.27 19:15:59:255 servergroups.AbstractNextHop - 
Leaving compareDomainNames()
[REQUESTI.12] DEBUG 2013.02.27 19:15:59:255 loadbalancer.LBBase - 
Server group SG-CUCM.ajeet.com selected {reSgElementWeight=50, 
reSgElementSgName=SG-CUCM.ajeet.com, reSgElementTransport=UDP, 
reSgElementQValue=1.0, reSgElementPort=5060, reSgElementHost=14.128.64.191}
[REQUESTI.12] DEBUG 2013.02.27 19:15:59:255 loadbalancer.LBBase - 
Leaving getServer()

SIP INVITE将发送到所选元素。

[REQUESTI.12] DEBUG 2013.02.27 19:15:59:256 DsSipLlApi.Wire - 
Sending UDP packet on 14.128.100.169:32771, destination 14.128.64.191:5060
INVITE sip:4082022102@SG-CUCM.ajeet.com SIP/2.0
Via: SIP/2.0/UDP 14.128.100.169:5061;branch=z9hG4bK.ToYJFeKMyfZGySv.gcLjg~~231
Via: SIP/2.0/UDP 14.128.100.150:5060;branch=z9hG4bK21F2555
Max-Forwards: 68
To: <sip:4082022102@14.128.100.169>
From: "4082025555" <sip:4082025555@14.128.100.150>;tag=81D7430C-1D2
Contact: <sip:4082025555@14.128.100.150:5060>
Expires: 180
Remote-Party-ID: "4082025555" <sip:4082025555@14.128.100.150
>;party=calling;screen=yes;privacy=off
Call-ID: F3E5F396-804811E2-9818EC62-1B7185EE@14.128.100.150
CSeq: 101 INVITE
Content-Length: 410
Date: Wed, 27 Feb 2013 19:15:59 GMT
Supported: 100rel,timer,resource-priority,replaces,sdp-anat
Min-SE: 1800
Cisco-Guid: 4091813662-2152206818-2551376994-0460424686
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER,
 SUBSCRIBE, NOTIFY, INFO, REGISTER
Timestamp: 1361992559
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required

v=0
o=CiscoSystemsSIP-GW-UserAgent 1007 629 IN IP4 14.128.100.150
s=SIP Call
c=IN IP4 14.128.100.150
t=0 0
m=audio 16930 RTP/AVP 18 101
c=IN IP4 14.128.100.150
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
m=video 17954 RTP/AVP 97
c=IN IP4 14.128.100.150
b=TIAS:1000000
a=rtpmap:97 H264/90000
a=fmtp:97 profile-level-id=42801E;packetization-mode=0

注意：某些设备（如CUCM）在处理请求之前先验证请求的统一资源标识符(URI)，这意味着可能需要为终端设备配置完全限定域名(FQDN)才能实现此目的。

在CUCM中，CUCM > System > Enterprise Parameter > Clusterwide Domain Configuration > Cluster Fully Qualified Domain Name应与服务器组名称相同。

场景 2

呼叫流:IP电话1 — CUCM — SIP — CUSP — SIP — CME — IP电话2

从IP电话2拨打222。408应在前缀上加上“预规范化”，以便访问IP电话1。

CME在此场景中充当PSTN。

SIP邀请从CUCM进入CUSP。

[DsTransportListener-0] DEBUG 2013.02.28 00:34:03:370 DsSipLlApi.Wire - 
Received UDP packet on 14.128.100.169:5061 ,source 14.128.64.192:5060
INVITE sip:2022222@14.128.100.169:5061 SIP/2.0
Via: SIP/2.0/UDP 14.128.64.192:5060;branch=z9hG4bK18012ae333f
From: "SJ Phone 1" <sip:2001@14.128.64.192>;
tag=534264~c1b77ee1-4af9-4a41-aed3-3846cd699427-49616146
To: <sip:2022222@14.128.100.169>
Date: Thu, 28 Feb 2013 00:34:03 GMT
Call-ID: 8be55500-12e1a5fb-ab-c040800e@14.128.64.192
Supported: timer,resource-priority,replaces
Min-SE:  1800
User-Agent: Cisco-CUCM8.6
Allow: INVITE, OPTIONS, INFO, BYE, CANCEL, ACK, PRACK, UPDATE,
 REFER, SUBSCRIBE, NOTIFY
CSeq: 101 INVITE
Expires: 180
Allow-Events: presence, kpml
Supported: X-cisco-srtp-fallback,X-cisco-original-called
Call-Info: <sip:14.128.64.192:5060>
;method="NOTIFY;Event=telephone-event;Duration=500"
Cisco-Guid: 2347062528-0000065536-0000000107-3225452558
Session-Expires:  1800
P-Asserted-Identity: "SJ Phone 1" <sip:2001@14.128.64.192>
Remote-Party-ID: "SJ Phone 1" <sip:2001@14.128.64.192>
;party=calling;screen=yes;privacy=off
Contact: <sip:2001@14.128.64.192:5060>
Max-Forwards: 70
Content-Length: 0

--- end of packet ---

在匹配的网络(Net-CUCM)配置上接受呼叫。

CLI

sip listen Net-CUCM udp 14.128.100.169 5061 

!
sip network Net-CUCM standard 
 no non-invite-provisional 
 allow-connections
 retransmit-count invite-client-transaction 3 
 retransmit-count invite-server-transaction 5 
 retransmit-count non-invite-client-transaction 3 
 retransmit-timer T1 500 
 retransmit-timer T2 4000 
 retransmit-timer T4 5000 
 retransmit-timer TU1 5000 
 retransmit-timer TU2 32000 
 retransmit-timer clientTn 64000 
 retransmit-timer serverTn 64000 
 tcp connection-setup-timeout 1000 
 udp max-datagram-size 1500 
 end network
!

GUI

调试

[REQUESTI.12] DEBUG 2013.02.28 00:34:03:373 conditions.RegexCondition - 
inNetwork='Net-CUCM'
[REQUESTI.12] DEBUG 2013.02.28 00:34:03:373 conditions.RegexCondition - 
IN_NETWORK: Net-CUCM

执行预规范化序列。

CLI

trigger pre-normalization sequence 1 policy CUCM-Prefix-408 
condition TC-from-CUCM

!
policy normalization CUCM-Prefix-408
 uri-component update request-uri user 2022222 4082022222
 end policy
!

GUI

调试

[REQUESTI.12] DEBUG 2013.02.28 00:34:03:373 util.Normalization - 
Entering Normalization(moduleRequest:pre-normalize
)[REQUESTI.12] DEBUG 2013.02.28 00:34:03:373 conditions.RegexCondition - 
inNetwork='Net-CUCM'
[REQUESTI.12] DEBUG 2013.02.28 00:34:03:373 conditions.RegexCondition - 
IN_NETWORK: Net-CUCM
[REQUESTI.12] DEBUG 2013.02.28 00:34:03:374 conditions.AbstractRegexCondition - 
pattern(^\QNet-CUCM\E$), toMatch(Net-CUCM) returning true
[REQUESTI.12] DEBUG 2013.02.28 00:34:03:374 triggers.ModuleTrigger - 
ModuleTrigger.eval() action<CUCM-Prefix-408> actionParameter<>
[REQUESTI.12] DEBUG 2013.02.28 00:34:03:374 triggers.ModuleTrigger - 
ModuleTrigger.eval() got the policy, executing it ...
[REQUESTI.12] DEBUG 2013.02.28 00:34:03:374 normalization.
URIComponentNormalizationAlgorithm - normalizing request-uri
[REQUESTI.12] DEBUG 2013.02.28 00:34:03:374 normalization.
URIComponentNormalizationAlgorithm - 
updating user/phone of the sip:2022222@14.128.100.169:5061 to 4082022222
[REQUESTI.12] DEBUG 2013.02.28 00:34:03:374 util.Normalization -
 Leaving Normalization.normalize()

触发器条件(TC-from-CUCM)匹配。

CLI

!
trigger condition TC-from-CUCM
 sequence 1 
  in-network ^\QNet-CUCM\E$
  end sequence
 end trigger condition
!

GUI

调试

[REQUESTI.12] DEBUG 2013.02.28 00:34:03:374 conditions.RegexCondition - 
inNetwork='Net-CUCM'
[REQUESTI.12] DEBUG 2013.02.28 00:34:03:374 conditions.RegexCondition - 
IN_NETWORK: Net-CUCM
[REQUESTI.12] DEBUG 2013.02.28 00:34:03:374 conditions.AbstractRegexCondition - 
pattern(^\QNet-CUCM\E$), toMatch(Net-CUCM) returning true

选中路由触发器配置以发现基于触发条件(TC-from-CUCM)匹配的路由策略（策略到PSTN）。

CLI

trigger routing sequence 2 policy Policy-to-PSTN condition TC-from-CUCM

GUI

调试

[REQUESTI.12] DEBUG 2013.02.28 00:34:03:374 conditions.RegexCondition - 
inNetwork='Net-CUCM'
[REQUESTI.12] DEBUG 2013.02.28 00:34:03:374 conditions.RegexCondition - 
IN_NETWORK: Net-CUCM
[REQUESTI.12] DEBUG 2013.02.28 00:34:03:374 conditions.AbstractRegexCondition -
pattern(^\QNet-CUCM\E$), toMatch(Net-CUCM) returning true
[REQUESTI.12] DEBUG 2013.02.28 00:34:03:375 triggers.ModuleTrigger - 
ModuleTrigger.eval() action<Policy-to-PSTN> actionParameter<>
[REQUESTI.12] DEBUG 2013.02.28 00:34:03:375 triggers.ModuleTrigger - 
ModuleTrigger.eval() got the policy, executing it ...

选中路由策略（策略到PSTN）配置以查找匹配的路由表(RT-PSTN)。

CLI

!
policy lookup Policy-to-PSTN
 sequence 100 RT-PSTN request-uri uri-component user
  rule exact
  end sequence
 end policy
!

GUI

调试

[REQUESTI.12] DEBUG 2013.02.28 00:34:03:375 nrs.XCLPrefix - 
Entering getKeyValue()
[REQUESTI.12] DEBUG 2013.02.28 00:34:03:375 nrs.FieldSelector - 
getUriPart: URI - sip:4082022222@14.128.100.169:5061 part 6
[REQUESTI.12] DEBUG 2013.02.28 00:34:03:375 nrs.FieldSelector - 
Requested field 45
[REQUESTI.12] DEBUG 2013.02.28 00:34:03:375 nrs.FieldSelector - 
Returning key 4082022222
[REQUESTI.12] DEBUG 2013.02.28 00:34:03:375 nrs.XCLPrefix - 
Leaving getKeyValue()
[REQUESTI.12] DEBUG 2013.02.28 00:34:03:375 modules.XCLLookup - 
table=RT-PSTN, key=4082022222
[REQUESTI.12] INFO  2013.02.28 00:34:03:376 modules.XCLLookup - 
table is RT-PSTN

检查路由表(RT-PSTN)配置以查找目标目标(SG-PSTN)。

CLI

!
route table RT-PSTN 
 key 4082022222 target-destination SG-PSTN Net-PSTN
 end route table
!

GUI

调试

[REQUESTI.12] DEBUG 2013.02.28 00:34:03:376 routingtables.RoutingTable -
Entering lookup()
[REQUESTI.12] DEBUG 2013.02.28 00:34:03:376 routingtables.RoutingTable - 
Looking up 4082022222 in table RT-PSTN with rule exact and modifiers=none
[REQUESTI.12] DEBUG 2013.02.28 00:34:03:376 routingtables.RoutingTable - 
Entering applyModifiers()
[REQUESTI.12] DEBUG 2013.02.28 00:34:03:376 routingtables.RoutingTable - 
Leaving applyModifiers(), returning 4082022222
[REQUESTI.12] DEBUG 2013.02.28 00:34:03:376 routingtables.RoutingTable - 
Leaving lookup()
[REQUESTI.12] INFO  2013.02.28 00:34:03:376 nrs.XCLPrefix - 
NRS Routing decision is: RouteTable:RT-PSTN, RouteKey:4082022222, 
TargetDestination:SG-PSTN, Network:Net-PSTN
[REQUESTI.12] DEBUG 2013.02.28 00:34:03:376 loadbalancer.LBFactory - 
Entering createLoadBalancer()
[REQUESTI.12] INFO  2013.02.28 00:34:03:376 loadbalancer.LBFactory - 
lbtype is 3(call-id)
[REQUESTI.12] DEBUG 2013.02.28 00:34:03:376 loadbalancer.LBFactory - 
Leaving createLoadBalancer()
[REQUESTI.12] DEBUG 2013.02.28 00:34:03:376 nrs.XCLPrefix - 
Stored NRSAlgResult=isFound=true, isFailure=false, Response=-1, 
Routes=[Ruri: SG-PSTN, Route: null, Network: Net-PSTN, q-value=1.
0radvance=[502, 503]], PolicyAdvance=null
[REQUESTI.12] DEBUG 2013.02.28 00:34:03:376 nrs.NRSAlgResult - 
set policyAdvance as specified in route=RouteTable:RT-PSTN, RouteKey:4082022222,
TargetDestination:SG-PSTN, Network:Net-PSTN
[REQUESTI.12] DEBUG 2013.02.28 00:34:03:376 nrs.NRSAlgResult - 
no policyAdvance specified in route
[REQUESTI.12] DEBUG 2013.02.28 00:34:03:376 nrs.NRSAlgResult - 
set policyAdvance as specified in algorithm={lookuprule=0, lookupfield=45, 
lookuplenght=-1, lookuptable=RT-PSTN, sequence=100, algorithm=1}
[REQUESTI.12] DEBUG 2013.02.28 00:34:03:376 nrs.NRSAlgResult - 
no policyAdvance specified in algorithm

执行后规范化序列。

CLI

trigger post-normalization sequence 1 policy UC520-Four-to-Full 
condition TC-UC520-to-PSTN 
!

GUI

调试

[REQUESTI.12] DEBUG 2013.02.28 00:34:03:378 util.Normalization - 
Entering Normalization(moduleRequest:post-normalize)
[REQUESTI.12] DEBUG 2013.02.28 00:34:03:378 conditions.RegexCondition - 
inNetwork='Net-CUCM'
[REQUESTI.12] DEBUG 2013.02.28 00:34:03:378 conditions.RegexCondition - 
IN_NETWORK: Net-CUCM
[REQUESTI.12] DEBUG 2013.02.28 00:34:03:378 conditions.AbstractRegexCondition - 
pattern(^\QNet-From-UC520\E$), toMatch(Net-CUCM) returning false
[REQUESTI.12] INFO  2013.02.28 00:34:03:378 util.Normalization - 
skipping post-normalize, due to either no trigger is configured or triggers 
did not evaluate to true or is configured to by-pass

检查服务器组(SG-PSTN)配置以查找元素IP地址，并根据Q值和权重配置将呼叫路由到可能的最佳路由。

CLI

!
server-group sip group SG-PSTN Net-PSTN 
 element ip-address 14.128.100.150 5060 udp q-value 1.0 weight 0 
 failover-resp-codes 503
 lbtype global
 ping
 end server-group
!

GUI

调试

[REQUESTI.12] DEBUG 2013.02.28 00:34:03:378 loadbalancer.LBFactory - 
Entering createLoadBalancer()
[REQUESTI.12] INFO  2013.02.28 00:34:03:378 loadbalancer.LBFactory - 
lbtype is 0(global)
[REQUESTI.12] INFO  2013.02.28 00:34:03:378 loadbalancer.LBFactory - 
Default lbtype is 3(call-id)
[REQUESTI.12] DEBUG 2013.02.28 00:34:03:378 loadbalancer.LBFactory - 
Leaving createLoadBalancer()
[REQUESTI.12] DEBUG 2013.02.28 00:34:03:378 loadbalancer.LBBase - 
Entering getServer()
[REQUESTI.12] DEBUG 2013.02.28 00:34:03:378 loadbalancer.LBBase - 
Entering initializeDomains()
[REQUESTI.12] DEBUG 2013.02.28 00:34:03:378 servergroups.
ServerGlobalStateWrapper - Net-PSTN:14.128.100.150:5060:1 numTries=
2--->isServerAvailable(): true
[REQUESTI.12] DEBUG 2013.02.28 00:34:03:378 loadbalancer.LBBase - 
Leaving initializeDomains()
[REQUESTI.12] INFO  2013.02.28 00:34:03:378 loadbalancer.LBHashBased - 
list of elements in order on which load balancing is done : 
{reSgElementWeight=0, reSgElementSgName=SG-PSTN, reSgElementTransport=UDP, 
reSgElementQValue=1.0, reSgElementPort=5060, reSgElementHost=14.128.100.150}
, [REQUESTI.12] DEBUG 2013.02.28 00:34:03:378 servergroups.AbstractNextHop - 
Entering compareDomainNames()
[REQUESTI.12] DEBUG 2013.02.28 00:34:03:379 servergroups.AbstractNextHop - 
Leaving compareDomainNames()
[REQUESTI.12] DEBUG 2013.02.28 00:34:03:379 loadbalancer.LBBase - 
Server group SG-PSTN selected {reSgElementWeight=0, reSgElementSgName=SG-PSTN, 
reSgElementTransport=UDP, reSgElementQValue=1.0, reSgElementPort=5060, 
reSgElementHost=14.128.100.150}
[REQUESTI.12] DEBUG 2013.02.28 00:34:03:379 loadbalancer.LBBase - 
Leaving getServer()

SIP INVITE将发送到所选元素。

[CT_CALLBACK.13] DEBUG 2013.02.28 00:34:06:260 DsSipLlApi.Wire - 
Sending UDP packet on 14.128.100.169:32772, destination 14.128.64.192:
5060SIP/2.0 200 OK
Via: SIP/2.0/UDP 14.128.64.192:5060;branch=z9hG4bK18012ae333f
To: <sip:2022222@14.128.100.169>;tag=82FA7450-F53
From: "SJ Phone 1" <sip:2001@14.128.64.192>
;tag=534264~c1b77ee1-4af9-4a41-aed3-3846cd699427-49616146
Contact: <sip:4082022222@14.128.100.150:5060>
Require: timer
Remote-Party-ID: <sip:4082022222@14.128.100.150>
;party=called;screen=no;privacy=off
Call-ID: 8be55500-12e1a5fb-ab-c040800e@14.128.64.192
CSeq: 101 INVITE
Content-Length: 276
Date: Thu, 28 Feb 2013 00:34:03 GMT
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, 
SUBSCRIBE, NOTIFY, INFO, REGISTER
Allow-Events: telephone-event
Supported: replaces
Supported: sdp-anat
Supported: timer
Server: Cisco-SIPGateway/IOS-12.x
Session-Expires: 1800;refresher=uac
Content-Type: application/sdp
Content-Disposition: session;handling=required

v=0
o=CiscoSystemsSIP-GW-UserAgent 6810 2753 IN IP4 14.128.100.150
s=SIP Call
c=IN IP4 14.128.100.150
t=0 0
m=audio 16862 RTP/AVP 18 101
c=IN IP4 14.128.100.150
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20

场景 3

呼叫流:IP电话1 - CME 1 - SIP - CUSP - SIP - CME 2 - IP电话2

从IP电话1拨打4001或4002，以访问IP电话2上的分机。

在此场景中，CME 2是UC520，而CME 1充当PSTN。

SIP INVITE从CME 1(PSTN)进入CUSP。

[DsTransportListener-3] DEBUG 2013.02.28 05:28:57:360 DsSipLlApi.Wire - 
Received UDP packet on 14.128.100.169:5062 ,source 14.128.100.150:56578
INVITE sip:4002@14.128.100.169:5062 SIP/2.0
Via: SIP/2.0/UDP 14.128.100.150:5060;branch=z9hG4bK2292567
Remote-Party-ID: <sip:85224044444@14.128.100.150>
;party=calling;screen=no;privacy=off
From: <sip:85224044444@14.128.100.150>;tag=84086F7C-10B8
To: <sip:4002@14.128.100.169>
Date: Thu, 28 Feb 2013 05:28:57 GMT
Call-ID: 9559E957-809E11E2-9856EC62-1B7185EE@14.128.100.150
Supported: 100rel,timer,resource-priority,replaces,sdp-anat
Min-SE:  1800
Cisco-Guid: 2446255913-2157842914-2555505762-0460424686
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER,
 SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1362029337
Contact: <sip:85224044444@14.128.100.150:5060>
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 276

v=0
o=CiscoSystemsSIP-GW-UserAgent 3653 4016 IN IP4 14.128.100.150
s=SIP Call
c=IN IP4 14.128.100.150
t=0 0
m=audio 19202 RTP/AVP 18 101
c=IN IP4 14.128.100.150
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20

--- end of packet ---

在匹配的网络(Net-UC520)配置上接受呼叫。

CLI

sip listen Net-UC520 udp 14.128.100.169 5062

 !
sip network Net-From-UC520 standard 
 no non-invite-provisional 
 allow-connections
 retransmit-count invite-client-transaction 3 
 retransmit-count invite-server-transaction 5 
 retransmit-count non-invite-client-transaction 3
  retransmit-timer T1 500
  retransmit-timer T2 4000
  retransmit-timer T4 5000
  retransmit-timer TU1 5000
  retransmit-timer TU2 32000
  retransmit-timer clientTn 64000
  retransmit-timer serverTn 64000
  tcp connection-setup-timeout 1000
  udp max-datagram-size 1500
  end network
!

GUI

调试

[REQUESTI.10] DEBUG 2013.02.28 05:28:57:362 conditions.RegexCondition - 
inNetwork='Net-UC520'
[REQUESTI.10] DEBUG 2013.02.28 05:28:57:362 conditions.RegexCondition - 
IN_NETWORK: Net-UC520

执行预规范化序列。

CLI

trigger pre-normalization sequence 1 policy CUCM-Prefix-408 condition 
TC-from-CUCM

GUI

调试

[REQUESTI.10] DEBUG 2013.02.28 05:28:57:362 util.Normalization -
Entering Normalization(moduleRequest:pre-normalize)
[REQUESTI.10] DEBUG 2013.02.28 05:28:57:362 conditions.RegexCondition - 
inNetwork='Net-UC520'
[REQUESTI.10] DEBUG 2013.02.28 05:28:57:362 conditions.RegexCondition - 
IN_NETWORK: Net-UC520
[REQUESTI.10] DEBUG 2013.02.28 05:28:57:362 conditions.AbstractRegexCondition - 
pattern(^\QNet-CUCM\E$), toMatch(Net-UC520) returning false
[REQUESTI.10] INFO  2013.02.28 05:28:57:362 util.Normalization - 
skipping pre-normalize, due to either no trigger is configured or triggers 
did not evaluate to true or is configured to by-pass

触发器条件（TC-PSTN到UC520）匹配。

CLI

!
trigger condition TC-PSTN-to-UC520
 sequence 1 
  in-network ^\QNet-UC520\E$
  end sequence
 end trigger condition
!

GUI

调试

[REQUESTI.10] DEBUG 2013.02.28 05:28:57:363 conditions.RegexCondition - 
inNetwork='Net-UC520'
[REQUESTI.10] DEBUG 2013.02.28 05:28:57:363 conditions.RegexCondition - 
IN_NETWORK: Net-UC520
[REQUESTI.10] DEBUG 2013.02.28 05:28:57:363 conditions.AbstractRegexCondition -
pattern(^\QNet-UC520\E$), toMatch(Net-UC520) returning true

选中路由触发器配置以查找基于触发条件（TC-PSTN到UC520）匹配的路由策略(Policy-UC520)。

CLI

trigger routing sequence 3 policy Policy-UC520 condition TC-PSTN-to-UC520

GUI

调试

[REQUESTI.10] DEBUG 2013.02.28 05:28:57:363 triggers.ModuleTrigger - 
ModuleTrigger.eval() action<Policy-UC520> actionParameter<>
[REQUESTI.10] DEBUG 2013.02.28 05:28:57:363 triggers.ModuleTrigger - 
ModuleTrigger.eval() got the policy, executing it ...

检查路由策略(Policy-UC520)配置以查找匹配的路由表(RT-UC520)。

CLI

!
policy lookup Policy-UC520
 sequence 100 RT-UC520 request-uri uri-component user
  modify-key 400[12] 2222
  rule exact
  end sequence
 end policy
!

GUI

调试

[REQUESTI.10] DEBUG 2013.02.28 05:28:57:363 nrs.XCLPrefix - 
Entering getKeyValue()
[REQUESTI.10] DEBUG 2013.02.28 05:28:57:363 nrs.FieldSelector - 
getUriPart: URI - sip:4002@14.128.100.169:5062 part 6
[REQUESTI.10] DEBUG 2013.02.28 05:28:57:363 nrs.FieldSelector - 
Requested field 45
[REQUESTI.10] DEBUG 2013.02.28 05:28:57:363 nrs.FieldSelector - 
Returning key 4002
[REQUESTI.10] DEBUG 2013.02.28 05:28:57:363 nrs.FieldSelector - 
Retrieved Modifier  RegexModifier: match= 400[12], replace= 2222, 
ignore case= false
[REQUESTI.10] DEBUG 2013.02.28 05:28:57:363 nrs.FieldSelector - 
Input field: 4002
[REQUESTI.10] DEBUG 2013.02.28 05:28:57:363 nrs.FieldSelector - 
Modified field: 2222
[REQUESTI.10] DEBUG 2013.02.28 05:28:57:363 nrs.XCLPrefix - 
Leaving getKeyValue()
[REQUESTI.10] DEBUG 2013.02.28 05:28:57:363 modules.XCLLookup - 
table=RT-UC520, key=2222
[REQUESTI.10] INFO  2013.02.28 05:28:57:364 modules.XCLLookup - 
table is RT-UC520

检查路由表(RT-UC520)配置以查找目标目标(RG-UC520)。

CLI

!
route table RT-UC520 
 key 2222 group RG-UC520
 end route table
!

GUI

调试

[REQUESTI.10] DEBUG 2013.02.28 05:28:57:364 routingtables.RoutingTable - 
Entering lookup()
[REQUESTI.10] DEBUG 2013.02.28 05:28:57:364 routingtables.RoutingTable - 
Looking up 2222 in table RT-UC520 with rule exact and modifiers=none
[REQUESTI.10] DEBUG 2013.02.28 05:28:57:364 routingtables.RoutingTable - 
Entering applyModifiers()
[REQUESTI.10] DEBUG 2013.02.28 05:28:57:364 routingtables.RoutingTable - 
Leaving applyModifiers(), returning 2222
[REQUESTI.10] DEBUG 2013.02.28 05:28:57:364 routingtables.RoutingTable - 
Leaving lookup()
[REQUESTI.10] INFO  2013.02.28 05:28:57:364 nrs.XCLPrefix - 
NRS Routing decision is: RouteTable:RT-UC520, RouteKey:2222, RouteGroup:RG-UC520
[REQUESTI.10] DEBUG 2013.02.28 05:28:57:364 loadbalancer.LBFactory - 
Entering createLoadBalancer()
[REQUESTI.10] INFO  2013.02.28 05:28:57:364 loadbalancer.LBFactory - 
lbtype is 3(call-id)
[REQUESTI.10] DEBUG 2013.02.28 05:28:57:364 loadbalancer.LBFactory - 
Leaving createLoadBalancer()
[REQUESTI.10] DEBUG 2013.02.28 05:28:57:364 nrs.XCLPrefix - 
Stored NRSAlgResult=isFound=true, isFailure=false, Response=-1, 
Routes=[Ruri: SG-UC520, Route: null, Network: Net-UC520, q-value=1.
0radvance=[502, 503]], PolicyAdvance=null
[REQUESTI.10] DEBUG 2013.02.28 05:28:57:364 nrs.NRSAlgResult - 
set policyAdvance as specified in route=RouteTable:RT-UC520, RouteKey:2222, 
RouteGroup:RG-UC520
[REQUESTI.10] DEBUG 2013.02.28 05:28:57:364 nrs.NRSAlgResult - 
no policyAdvance specified in route
[REQUESTI.10] DEBUG 2013.02.28 05:28:57:364 nrs.NRSAlgResult - 
set policyAdvance as specified in algorithm={lookupkeymodifier=
[ RegexModifier: match= 400[12], replace= 2222, ignore case= false], 
lookuprule=0, lookupfield=45, lookuplenght=-1, lookuptable=RT-UC520, 
sequence=100, algorithm=1}
[REQUESTI.10] DEBUG 2013.02.28 05:28:57:364 nrs.NRSAlgResult - 
no policyAdvance specified in algorithm

执行后规范化序列。

CLI

trigger post-normalization sequence 1 policy UC520-Four-to-Full 
condition TC-UC520-to-PSTN

GUI

调试

[REQUESTI.10] DEBUG 2013.02.28 05:28:57:365 util.Normalization - 
Entering Normalization(moduleRequest:post-normalize)
[REQUESTI.10] DEBUG 2013.02.28 05:28:57:365 conditions.RegexCondition - 
inNetwork='Net-UC520'
[REQUESTI.10] DEBUG 2013.02.28 05:28:57:365 conditions.RegexCondition - 
IN_NETWORK: Net-UC520
[REQUESTI.10] DEBUG 2013.02.28 05:28:57:365 conditions.AbstractRegexCondition - 
pattern(^\QNet-From-UC520\E$), toMatch(Net-UC520) returning false
[REQUESTI.10] INFO  2013.02.28 05:28:57:365 util.Normalization - 
skipping post-normalize, due to either no trigger is configured or 
triggers did not evaluate to true or is configured to by-pass

检查路由组配置以查找元素IP地址，并根据Q值和权重设置将呼叫路由到可能的最佳路由。

CLI

!
route group RG-UC520 
 element target-destination SG-UC520 Net-UC520 q-value 1.0 
  failover-codes 502 - 503 
  weight 0 
  end element
 end route
!

!
server-group sip group SG-UC520 Net-UC520 
 element ip-address 14.128.100.161 5060 udp q-value 1.0 weight 0 
 failover-resp-codes 503
 lbtype global
 ping
 end server-group
!

GUI

调试

[REQUESTI.10] DEBUG 2013.02.28 05:28:57:365 loadbalancer.LBFactory - 
Entering createLoadBalancer()
[REQUESTI.10] INFO  2013.02.28 05:28:57:365 loadbalancer.LBFactory - 
lbtype is 0(global)
[REQUESTI.10] INFO  2013.02.28 05:28:57:365 loadbalancer.LBFactory - 
Default lbtype is 3(call-id)
[REQUESTI.10] DEBUG 2013.02.28 05:28:57:365 loadbalancer.LBFactory - 
Leaving createLoadBalancer()
[REQUESTI.10] DEBUG 2013.02.28 05:28:57:365 loadbalancer.LBBase - 
Entering getServer()
[REQUESTI.10] DEBUG 2013.02.28 05:28:57:365 loadbalancer.LBBase - 
Entering initializeDomains()
[REQUESTI.10] DEBUG 2013.02.28 05:28:57:365 servergroups.
ServerGlobalStateWrapper - Net-UC520:14.128.100.161:5060:1 numTries=
2--->isServerAvailable(): true
[REQUESTI.10] DEBUG 2013.02.28 05:28:57:366 loadbalancer.LBBase - 
Leaving initializeDomains()
[REQUESTI.10] INFO  2013.02.28 05:28:57:366 loadbalancer.LBHashBased - 
list of elements in order on which load balancing is done : 
{reSgElementWeight=0, reSgElementSgName=SG-UC520, reSgElementTransport=UDP, 
reSgElementQValue=1.0, reSgElementPort=5060, reSgElementHost=14.128.100.161},
 [REQUESTI.10] DEBUG 2013.02.28 05:28:57:366 servergroups.AbstractNextHop - 
Entering compareDomainNames()
[REQUESTI.10] DEBUG 2013.02.28 05:28:57:366 servergroups.AbstractNextHop - 
Leaving compareDomainNames()
[REQUESTI.10] DEBUG 2013.02.28 05:28:57:366 loadbalancer.LBBase - 
Server group SG-UC520 selected {reSgElementWeight=0, reSgElementSgName=SG-UC520, 
reSgElementTransport=UDP, reSgElementQValue=1.0, reSgElementPort=5060,
reSgElementHost=14.128.100.161}
[REQUESTI.10] DEBUG 2013.02.28 05:28:57:366 loadbalancer.LBBase - 
Leaving getServer()

SIP INVITE将发送到所选元素。

[REQUESTI.10] DEBUG 2013.02.28 05:28:57:367 DsSipLlApi.Wire - 
Sending UDP packet on 14.128.100.169:32773, destination 14.128.100.161:5060
INVITE sip:4002@SG-UC520 SIP/2.0
Via: SIP/2.0/UDP 
14.128.100.169:5062;branch=z9hG4bK.ToYJFeKMyfZGySv.gcLjg~~237
Via: SIP/2.0/UDP 14.128.100.150:5060;branch=z9hG4bK2292567
Max-Forwards: 69
To: <sip:4002@14.128.100.169>
From: <sip:85224044444@14.128.100.150>;tag=84086F7C-10B8
Contact: <sip:85224044444@14.128.100.150:5060>
Expires: 180
Remote-Party-ID: <sip:85224044444@14.128.100.150>
;party=calling;screen=no;privacy=off
Call-ID: 9559E957-809E11E2-9856EC62-1B7185EE@14.128.100.150
CSeq: 101 INVITE
Content-Length: 276
Date: Thu, 28 Feb 2013 05:28:57 GMT
Supported: 100rel,timer,resource-priority,replaces,sdp-anat
Min-SE: 1800
Cisco-Guid: 2446255913-2157842914-2555505762-0460424686
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER,
 SUBSCRIBE, NOTIFY, INFO, REGISTER
Timestamp: 1362029337
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required

v=0
o=CiscoSystemsSIP-GW-UserAgent 3653 4016 IN IP4 14.128.100.150
s=SIP Call
c=IN IP4 14.128.100.150
t=0 0
m=audio 19202 RTP/AVP 18 101
c=IN IP4 14.128.100.150
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20

场景 4

呼叫流：IP电话1 — CME 1 — SIP — CUSP — SIP — CME 2 — IP电话2

从IP电话2拨打444，该电话已更改为415 240 4444（带后规范化），以便访问IP电话1。

在此场景中，CME 2是UC520，而CME 1充当PSTN。

SIP邀请从CME 2(UC520)进入CUSP。

[DsTransportListener-1] DEBUG 2013.02.28 07:06:57:220 DsSipLlApi.Wire - 
Received UDP packet on 14.128.100.169:5063 ,source 14.128.100.161:59404
INVITE sip:4444@14.128.100.169:5063 SIP/2.0
Date: Thu, 28 Feb 2013 07:09:20 GMT
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, 
SUBSCRIBE, NOTIFY, INFO, REGISTER
From: <sip:4001@14.128.100.161>;tag=256D566C-22AC
Allow-Events: telephone-event
Supported: 100rel,timer,resource-priority,replaces,sdp-anat
Min-SE:  1800
Remote-Party-ID: <sip:4001@14.128.100.161>
;party=calling;screen=no;privacy=off
Cisco-Guid: 2598740490-2158760418-2150671243-2598404062
Timestamp: 1362035360
Content-Length: 543
User-Agent: Cisco-SIPGateway/IOS-12.x
To: <sip:4444@14.128.100.169>
Contact: <sip:4001@14.128.100.161:5060>
Expires: 180
Content-Type: multipart/mixed;boundary=uniqueBoundary
Call-ID: 9B62C157-80AC11E2-8035A38B-9AE07FDE@14.128.100.161
Via: SIP/2.0/UDP 14.128.100.161:5060;branch=z9hG4bK21E82
CSeq: 101 INVITE
Max-Forwards: 70
Mime-Version: 1.0

--uniqueBoundary
Content-Type: application/sdp
Content-Disposition: session;handling=required

v=0
o=CiscoSystemsSIP-GW-UserAgent 3418 2914 IN IP4 14.128.100.161
s=SIP Call
c=IN IP4 14.128.100.161
t=0 0
m=audio 17618 RTP/AVP 18 101
c=IN IP4 14.128.100.161
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20

--uniqueBoundary
Content-Type: application/gtd
Content-Disposition: signal;handling=optional

IAM,
GCI,9ae5a20a80ac11e28030a38b9ae07fde

--- end of packet ---

在匹配的网络(Net-From-UC520)配置上接受呼叫。

CLI

sip listen Net-From-UC520 udp 14.128.100.169 5063
 !
sip network Net-From-UC520 standard
  no non-invite-provisional
  allow-connections
 retransmit-count invite-client-transaction 3
  retransmit-count invite-server-transaction 5
  retransmit-count non-invite-client-transaction 3
  retransmit-timer T1 500 
 retransmit-timer T2 4000
  retransmit-timer T4 5000
  retransmit-timer TU1 5000
  retransmit-timer TU2 32000
  retransmit-timer clientTn 64000
  retransmit-timer serverTn 64000
  tcp connection-setup-timeout 1000
  udp max-datagram-size 1500
  end network
!

GUI

调试

[REQUESTI.5] DEBUG 2013.02.28 07:06:57:229 conditions.RegexCondition - 
inNetwork='Net-From-UC520'
[REQUESTI.5] DEBUG 2013.02.28 07:06:57:229 conditions.RegexCondition - 
IN_NETWORK: Net-From-UC520

执行预规范化序列。

CLI

trigger pre-normalization sequence 1 policy CUCM-Prefix-408 condition 
TC-from-CUCM

GUI

调试

[REQUESTI.5] DEBUG 2013.02.28 07:06:57:229 util.Normalization - 
Entering Normalization(moduleRequest:pre-normalize)
[REQUESTI.5] DEBUG 2013.02.28 07:06:57:229 conditions.RegexCondition - 
inNetwork='Net-From-UC520'
[REQUESTI.5] DEBUG 2013.02.28 07:06:57:229 conditions.RegexCondition - 
IN_NETWORK: Net-From-UC520
[REQUESTI.5] DEBUG 2013.02.28 07:06:57:229 conditions.AbstractRegexCondition - 
pattern(^\QNet-CUCM\E$), toMatch(Net-From-UC520) returning false
[REQUESTI.5] INFO  2013.02.28 07:06:57:229 util.Normalization - 
skipping pre-normalize, due to either no trigger is configured or triggers 
did not evaluate to true or is configured to by-pass

触发器条件（TC-UC520到PSTN）匹配。

CLI

!
trigger condition TC-UC520-to-PSTN
 sequence 1
   in-network ^\QNet-From-UC520\E$
 end sequence
 end trigger condition
!

GUI

调试

[REQUESTI.5] DEBUG 2013.02.28 07:06:57:229 conditions.RegexCondition - 
inNetwork='Net-From-UC520'
[REQUESTI.5] DEBUG 2013.02.28 07:06:57:229 conditions.RegexCondition - 
IN_NETWORK: Net-From-UC520
[REQUESTI.5] DEBUG 2013.02.28 07:06:57:230 conditions.AbstractRegexCondition - 
pattern(^\QNet-From-UC520\E$), toMatch(Net-From-UC520) returning true

选中路由触发器配置以查找基于触发条件(TC-UC520-to-PSTN)匹配的路由策略(Policy-UC520-to-PSTN)。

CLI

trigger routing sequence 4 policy Policy-UC520-to-PSTN condition 
TC-UC520-to-PSTN

GUI

调试

[REQUESTI.5] DEBUG 2013.02.28 07:06:57:230 triggers.ModuleTrigger - 
ModuleTrigger.eval() action<Policy-UC520-to-PSTN> actionParameter<>
[REQUESTI.5] DEBUG 2013.02.28 07:06:57:230 triggers.ModuleTrigger - 
ModuleTrigger.eval() got the policy, executing it ...

选中路由策略(Policy-UC520-to-PSTN)配置以查找匹配的路由表(RT-UC520-PSTN)。

CLI

!
policy lookup Policy-UC520-to-PSTN
 sequence 100 RT-UC520-PSTN request-uri uri-component user
  modify-key 4444 3333
  rule exact
  end sequence
 end policy
!

GUI

调试

[REQUESTI.5] DEBUG 2013.02.28 07:06:57:230 nrs.XCLPrefix - 
Entering getKeyValue()
[REQUESTI.5] DEBUG 2013.02.28 07:06:57:230 nrs.FieldSelector - 
getUriPart: URI - sip:4444@14.128.100.169:5063 part 6
[REQUESTI.5] DEBUG 2013.02.28 07:06:57:230 nrs.FieldSelector - 
Requested field 45
[REQUESTI.5] DEBUG 2013.02.28 07:06:57:230 nrs.FieldSelector - 
Returning key 4444
[REQUESTI.5] DEBUG 2013.02.28 07:06:57:230 nrs.FieldSelector - 
Retrieved Modifier  RegexModifier: match= 4444, replace= 3333, 
ignore case= false
[REQUESTI.5] DEBUG 2013.02.28 07:06:57:230 nrs.FieldSelector - 
Input field: 4444
[REQUESTI.5] DEBUG 2013.02.28 07:06:57:230 nrs.FieldSelector - 
Modified field: 3333
[REQUESTI.5] DEBUG 2013.02.28 07:06:57:230 nrs.XCLPrefix - 
Leaving getKeyValue()
[REQUESTI.5] DEBUG 2013.02.28 07:06:57:230 modules.XCLLookup - 
table=RT-UC520-PSTN, key=3333
[REQUESTI.5] INFO  2013.02.28 07:06:57:230 modules.XCLLookup - 
table is RT-UC520-PSTN

检查路由表(RT-UC520-PSTN)配置以查找目标目标(RG-UC520)。

CLI

!
route table RT-UC520-PSTN
  key 3333 group RG-UC520-to-PSTN
 end route table
!

GUI

调试

[REQUESTI.5] DEBUG 2013.02.28 07:06:57:230 routingtables.RoutingTable - 
Entering lookup()
[REQUESTI.5] DEBUG 2013.02.28 07:06:57:231 routingtables.RoutingTable - 
Looking up 3333 in table RT-UC520-PSTN with rule exact and modifiers=none
[REQUESTI.5] DEBUG 2013.02.28 07:06:57:231 routingtables.RoutingTable - 
Entering applyModifiers()
[REQUESTI.5] DEBUG 2013.02.28 07:06:57:231 routingtables.RoutingTable - 
Leaving applyModifiers(), returning 3333
[REQUESTI.5] DEBUG 2013.02.28 07:06:57:231 routingtables.RoutingTable - 
Leaving lookup()
[REQUESTI.5] INFO  2013.02.28 07:06:57:231 nrs.XCLPrefix - 
NRS Routing decision is: RouteTable:RT-UC520-PSTN, RouteKey:3333, 
RouteGroup:RG-UC520-to-PSTN
[REQUESTI.5] DEBUG 2013.02.28 07:06:57:231 loadbalancer.LBFactory - 
Entering createLoadBalancer()
[REQUESTI.5] INFO  2013.02.28 07:06:57:231 loadbalancer.LBFactory - 
lbtype is 3(call-id)
[REQUESTI.5] DEBUG 2013.02.28 07:06:57:231 loadbalancer.LBFactory - 
Leaving createLoadBalancer()
[REQUESTI.5] DEBUG 2013.02.28 07:06:57:231 nrs.XCLPrefix - 
Stored NRSAlgResult=isFound=true, isFailure=false, Response=-1, 
Routes=[Ruri: 14.128.100.150, Route: null, Network: Net-From-UC520, 
q-value=1.0radvance=[502, 503]], PolicyAdvance=null
[REQUESTI.5] DEBUG 2013.02.28 07:06:57:231 nrs.NRSAlgResult - 
set policyAdvance as specified in route=RouteTable:RT-UC520-PSTN, 
RouteKey:3333, RouteGroup:RG-UC520-to-PSTN
[REQUESTI.5] DEBUG 2013.02.28 07:06:57:231 nrs.NRSAlgResult - 
no policyAdvance specified in route
[REQUESTI.5] DEBUG 2013.02.28 07:06:57:231 nrs.NRSAlgResult - 
set policyAdvance as specified in algorithm={lookupkeymodifier=
[ RegexModifier: match= 4444, replace= 3333, ignore case= false], 
lookuprule=0, lookupfield=45, lookuplenght=-1, lookuptable=RT-UC520-PSTN, 
sequence=100, algorithm=1}
[REQUESTI.5] DEBUG 2013.02.28 07:06:57:231 nrs.NRSAlgResult - 
no policyAdvance specified in algorithm

执行后规范化序列。

CLI

trigger post-normalization sequence 1 policy UC520-Four-to-Full 
condition TC-UC520-to-PSTN

!
policy normalization UC520-Four-to-Full
 uri-component update request-uri user 4444 85224044444
 end policy
!

GUI

调试

[REQUESTI.5] DEBUG 2013.02.28 07:06:57:232 util.Normalization - 
Entering Normalization(moduleRequest:post-normalize)
[REQUESTI.5] DEBUG 2013.02.28 07:06:57:232 conditions.RegexCondition - 
inNetwork='Net-From-UC520'
[REQUESTI.5] DEBUG 2013.02.28 07:06:57:232 conditions.RegexCondition - 
IN_NETWORK: Net-From-UC520
[REQUESTI.5] DEBUG 2013.02.28 07:06:57:232 conditions.AbstractRegexCondition - 
pattern(^\QNet-From-UC520\E$), toMatch(Net-From-UC520) returning true
[REQUESTI.5] DEBUG 2013.02.28 07:06:57:232 triggers.ModuleTrigger - 
ModuleTrigger.eval() action<UC520-Four-to-Full> actionParameter<>
[REQUESTI.5] DEBUG 2013.02.28 07:06:57:232 triggers.ModuleTrigger - 
ModuleTrigger.eval() got the policy, executing it ...
[REQUESTI.5] DEBUG 2013.02.28 07:06:57:232 normalization.URIComponentNormalizationAlgorithm - 
normalizing request-uri
[REQUESTI.5] DEBUG 2013.02.28 07:06:57:232 normalization.URIComponentNormalizationAlgorithm - 
updating user/phone of the sip:4444@14.128.100.150 to 85224044444
[REQUESTI.5] DEBUG 2013.02.28 07:06:57:232 util.Normalization - 
Leaving Normalization.normalize()

检查路由组配置以查找元素IP地址，并根据Q值和权重设置将呼叫路由到可能的最佳路由。

CLI

!
route group RG-UC520-to-PSTN 
 element target-destination 14.128.100.150 Net-From-UC520 q-value 1.0 
  failover-codes 502 - 503
   weight 0 
  end element
 end route
!

GUI

调试

[REQUESTI.5] DEBUG 2013.02.28 07:06:57:231 loadbalancer.LBBase - 
Entering getServer()
[REQUESTI.5] DEBUG 2013.02.28 07:06:57:231 loadbalancer.LBBase - 
Entering initializeDomains()
[REQUESTI.5] DEBUG 2013.02.28 07:06:57:231 nrs.NRSRoutes - 
routes before applying time policies: [Ruri: 14.128.100.150, 
Route: null, Network: Net-From-UC520, q-value=1.0radvance=[502, 503]]
[REQUESTI.5] DEBUG 2013.02.28 07:06:57:231 nrs.NRSRoutes - 
routes after applying time policies: [Ruri: 14.128.100.150, Route: 
null, Network: Net-From-UC520, q-value=1.0radvance=[502, 503]]
[REQUESTI.5] DEBUG 2013.02.28 07:06:57:231 loadbalancer.LBBase - 
Leaving initializeDomains()
[REQUESTI.5] INFO  2013.02.28 07:06:57:231 loadbalancer.LBHashBased - 
list of elements in order on which load balancing is done : Ruri: 
14.128.100.150, Route: null, Network: Net-From-UC520, q-value=
1.0radvance=[502, 503],
 [REQUESTI.5] DEBUG 2013.02.28 07:06:57:232 loadbalancer.LBBase - 
Server group route-sg selected Ruri: 14.128.100.150, Route: null, 
Network: Net-From-UC520, q-value=1.0radvance=[502, 503]
[REQUESTI.5] DEBUG 2013.02.28 07:06:57:232 loadbalancer.LBBase - 
Leaving getServer()

SIP INVITE将发送到所选元素。

[REQUESTI.5] DEBUG 2013.02.28 07:06:57:233 DsSipLlApi.Wire - 
Sending UDP packet on 14.128.100.169:32770, destination 14.128.100.150:5060
INVITE sip:85224044444@14.128.100.150 SIP/2.0
Via: SIP/2.0/UDP 
14.128.100.169:5063;branch=z9hG4bK.ToYJFeKMyfZGySv.gcLjg~~238
Via: SIP/2.0/UDP 14.128.100.161:5060;branch=z9hG4bK21E82
Max-Forwards: 69
To: <sip:4444@14.128.100.169>
From: <sip:4001@14.128.100.161>;tag=256D566C-22AC
Contact: <sip:4001@14.128.100.161:5060>
Expires: 180
Remote-Party-ID: <sip:4001@14.128.100.161>
;party=calling;screen=no;privacy=off
Call-ID: 9B62C157-80AC11E2-8035A38B-9AE07FDE@14.128.100.161
CSeq: 101 INVITE
Content-Length: 543
Date: Thu, 28 Feb 2013 07:09:20 GMT
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER,
 SUBSCRIBE, NOTIFY, INFO, REGISTER
Allow-Events: telephone-event
Supported: 100rel,timer,resource-priority,replaces,sdp-anat
Min-SE: 1800
Cisco-Guid: 2598740490-2158760418-2150671243-2598404062
Timestamp: 1362035360
User-Agent: Cisco-SIPGateway/IOS-12.x
Content-Type: multipart/mixed;boundary=uniqueBoundary
MIME-Version: 1.0

--uniqueBoundary
Content-Type: application/sdp
Content-Disposition: session;handling=required

v=0
o=CiscoSystemsSIP-GW-UserAgent 3418 2914 IN IP4 14.128.100.161
s=SIP Call
c=IN IP4 14.128.100.161
t=0 0
m=audio 17618 RTP/AVP 18 101
c=IN IP4 14.128.100.161
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20

--uniqueBoundary
Content-Type: application/gtd
Content-Disposition: signal;handling=optional

IAM,
GCI,9ae5a20a80ac11e28030a38b9ae07fde

所有四种方案的配置

以下是本文档中描述的所有四种呼叫场景的完整CUSP配置：

ajeesing-cusp-8.5.3(cusp)# show configuration active verbose
 Building CUSP configuration...
!
server-group sip global-load-balance call-id
server-group sip retry-after 0
server-group sip element-retries udp 2 
server-group sip element-retries tls 1 
server-group sip element-retries tcp 1
sip dns-srv
 enable 
 no naptr 
 end dns
!
no sip header-compaction 
!
sip logging 
sip max-forwards 70
sip network Net-CUCM standard 
 no non-invite-provisional 
 allow-connections
 retransmit-count invite-client-transaction 3
  retransmit-count invite-server-transaction 5 
 retransmit-count non-invite-client-transaction 3 
 retransmit-timer T1 500 
 retransmit-timer T2 4000 
 retransmit-timer T4 5000 
 retransmit-timer TU1 5000 
 retransmit-timer TU2 32000 
 retransmit-timer clientTn 64000 
 retransmit-timer serverTn 64000 
 tcp connection-setup-timeout 1000
  udp max-datagram-size 1500
  end network
!
sip network Net-From-UC520 standard 
 no non-invite-provisional 
 allow-connections
 retransmit-count invite-client-transaction 3 
 retransmit-count invite-server-transaction 5 
 retransmit-count non-invite-client-transaction 3 
 retransmit-timer T1 500 
 retransmit-timer T2 4000 
 retransmit-timer T4 5000 
 retransmit-timer TU1 5000 
 retransmit-timer TU2 32000 
 retransmit-timer clientTn 64000 
 retransmit-timer serverTn 64000 
 tcp connection-setup-timeout 1000 
 udp max-datagram-size 1500 
 end network
!
sip network Net-PSTN standard 
 no non-invite-provisional 
 allow-connections
 retransmit-count invite-client-transaction 3 
 retransmit-count invite-server-transaction 5
  retransmit-count non-invite-client-transaction 3 
 retransmit-timer T1 500 
 retransmit-timer T2 4000 
 retransmit-timer T4 5000 
 retransmit-timer TU1 5000 
 retransmit-timer TU2 32000 
 retransmit-timer clientTn 64000 
 retransmit-timer serverTn 64000 
 tcp connection-setup-timeout 1000 
 udp max-datagram-size 1500 
 end network
!
sip network Net-UC520 standard 
 no non-invite-provisional 
 allow-connections
 retransmit-count invite-client-transaction 3 
 retransmit-count invite-server-transaction 5 
 retransmit-count non-invite-client-transaction 3 
 retransmit-timer T1 500 
 retransmit-timer T2 4000 
 retransmit-timer T4 5000 
 retransmit-timer TU1 5000 
 retransmit-timer TU2 32000 
 retransmit-timer clientTn 64000 
 retransmit-timer serverTn 64000 
 tcp connection-setup-timeout 1000 
 udp max-datagram-size 1500 
 end network
!
sip overload reject retry-after 0 
sip peg-counting 2 86400 
sip privacy service 
sip queue message 
 drop-policy head 
 low-threshold 80 
 size 2000 
 thread-count 20 
 end queue
!
sip queue radius 
 drop-policy head 
 low-threshold 80 
 size 2000 
 thread-count 20 
 end queue
!
sip queue request 
 drop-policy head 
 low-threshold 80 
 size 2000 
 thread-count 20 
 end queue
!
sip queue response 
 drop-policy head 
 low-threshold 80 
 size 2000 
 thread-count 20 
 end queue
!
sip queue st-callback 
 drop-policy head 
 low-threshold 80 
 size 2000 
 thread-count 10 
 end queue
!
sip queue timer 
 drop-policy none 
 low-threshold 80 
 size 2500 
 thread-count 8 
 end queue
!
sip queue xcl 
 drop-policy head 
 low-threshold 80 
 size 2000 
 thread-count 2 
 end queue
!
route recursion 
!
sip tcp connection-timeout 30 
sip tcp max-connections 256 
!
no sip tls 
!
trigger condition TC-PSTN-to-UC520
 sequence 1 
  in-network ^\QNet-UC520\E$
  end sequence
 sequence 2 
  in-network ^\QNet-CUCM\E$
  end sequence
 end trigger condition
!
trigger condition TC-UC520-to-PSTN
 sequence 1 
  in-network ^\QNet-From-UC520\E$
  end sequence
 end trigger condition
!
trigger condition TC-from-CUCM
 sequence 1 
  in-network ^\QNet-CUCM\E$
  end sequence
 end trigger condition
!
trigger condition TC-from-PSTN
 sequence 1 
  in-network ^\QNet-PSTN\E$
  end sequence
 sequence 2 
  in-network ^\QNet-CUCM\E$
  message request
  end sequence
 end trigger condition
!
trigger condition mid-dialog
 sequence 1 
  mid-dialog 
  end sequence
 end trigger condition
!
accounting
 no enable 
 no client-side 
 no server-side 
 end accounting
!
server-group sip group SG-CUCM.ajeet.com Net-CUCM 
 element ip-address 14.128.64.191 5060 udp q-value 1 weight 50
  element ip-address 14.128.64.192 5060 udp q-value 1.0 weight 100
  failover-resp-codes 503
 lbtype global
 ping
 end server-group
!
server-group sip group SG-PSTN Net-PSTN 
 element ip-address 14.128.100.150 5060 udp q-value 1.0 weight 0
  failover-resp-codes 503
 lbtype global
 ping
 end server-group
!
server-group sip group SG-UC520 Net-UC520 
 element ip-address 14.128.100.161 5060 udp q-value 1.0 weight 0 
 failover-resp-codes 503
 lbtype global
 ping
 end server-group
!
route group RG-UC520 
 element target-destination SG-UC520 Net-UC520 q-value 1.0 
  failover-codes 502 - 503 
  weight 0 
  end element
 end route
!
route group RG-UC520-to-PSTN 
 element target-destination 14.128.100.150 Net-From-UC520 q-value 1.0 
  failover-codes 502 - 503 
  weight 0 
  end element
 end route
!
route table RT-CUCM 
 key 1111 target-destination SG-CUCM.ajeet.com Net-CUCM
 end route table
!
route table RT-PSTN 
 key 4082022222 target-destination SG-PSTN Net-PSTN
 end route table
!
route table RT-UC520 
 key 2222 group RG-UC520
 end route table
!
route table RT-UC520-PSTN 
 key 3333 group RG-UC520-to-PSTN
 end route table
!
policy normalization CUCM-Prefix-408
 uri-component update request-uri user 2022222 4082022222
 end policy
!
policy normalization UC520-Four-to-Full
 uri-component update request-uri user 4444 85224044444
 end policy
!
policy lookup Policy-UC520
 sequence 100 RT-UC520 request-uri uri-component user
  modify-key 400[12] 2222
  rule exact
  end sequence
 end policy
!
policy lookup Policy-UC520-to-PSTN
 sequence 100 RT-UC520-PSTN request-uri uri-component user
  modify-key 4444 3333
  rule exact
  end sequence
 end policy
!
policy lookup Policy-to-CUCM
 sequence 100 RT-CUCM request-uri uri-component user
  modify-key 4082022102 1111
  rule exact
  end sequence
 end policy
!
policy lookup Policy-to-PSTN
 sequence 100 RT-PSTN request-uri uri-component user
  rule exact
  end sequence
 end policy
!
trigger routing sequence 1 policy Policy-to-CUCM condition 
TC-from-PSTN 
trigger routing sequence 2 policy Policy-to-PSTN condition 
TC-from-CUCM 
trigger routing sequence 3 policy Policy-UC520 condition 
TC-PSTN-to-UC520 
trigger routing sequence 4 policy Policy-UC520-to-PSTN condition 
TC-UC520-to-PSTN 
trigger pre-normalization sequence 1 policy CUCM-Prefix-408 
condition TC-from-CUCM 
trigger post-normalization sequence 1 policy UC520-Four-to-Full
condition TC-UC520-to-PSTN 
!
server-group sip ping-options Net-CUCM 14.128.100.169 4001 
 method OPTIONS
 ping-type proactive 2500
 timeout 2000
 end ping
!
server-group sip global-ping 
sip cac session-timeout 720 
sip cac Net-CUCM 14.128.64.191 5060 udp limit -1 
sip cac Net-CUCM 14.128.64.192 5060 udp limit -1 
sip cac Net-PSTN 14.128.100.150 5060 udp limit -1 
sip cac Net-UC520 14.128.100.161 5060 udp limit -1 
!
no sip cac 
!
sip listen Net-CUCM udp 14.128.100.169 5061 
sip listen Net-From-UC520 udp 14.128.100.169 5063 
sip listen Net-PSTN udp 14.128.100.169 5060 
sip listen Net-UC520 udp 14.128.100.169 5062 
!
call-rate-limit 200
!
end
ajeesing-cusp-8.5.3(cusp)#

验证

当前没有可用于此配置的验证过程。

故障排除

目前没有针对此配置的故障排除信息。

CUSP配置示例

下载选项

非歧视性语言

关于此翻译

目录

简介

先决条件

要求

使用的组件

配置

场景 1

场景 2

场景 3

场景 4

所有四种方案的配置

验证

故障排除

相关信息

由思科工程师提供

此文档是否有帮助?

联系我们