配置CSM负载 平衡SSL到SCAs组群的单臂代理模式

下载选项

  • PDF     (354.6 KB)
    在各种设备上使用 Adobe Reader 查看
已更新: 2018 年 9 月 11 日
文档 ID:26341

非歧视性语言

此产品的文档集力求使用非歧视性语言。在本文档集中，非歧视性语言是指不隐含针对年龄、残障、性别、种族身份、族群身份、性取向、社会经济地位和交叉性的歧视的语言。由于产品软件的用户界面中使用的硬编码语言、基于 RFP 文档使用的语言或引用的第三方产品使用的语言，文档中可能无法确保完全使用非歧视性语言。 深入了解思科如何使用包容性语言。

关于此翻译

思科采用人工翻译与机器翻译相结合的方式将此文档翻译成不同语言，希望全球的用户都能通过各自的语言得到支持性的内容。 请注意：即使是最好的机器翻译，其准确度也不及专业翻译人员的水平。 Cisco Systems, Inc. 对于翻译的准确性不承担任何责任，并建议您总是参考英文原始文档（已提供链接）。

简介

本文档提供了安全套接字层(SSL)流量到安全内容加速器(SCA)群的内容交换模块(CSM)负载均衡的配置示例。 此配置适用于处于非透明代理模式且连接处于单端口模式的SCA。

在非透明模式下，SCA使用SCA IP地址作为到Web服务器的纯文本连接的源。

注意：为SCA和Web服务器使用两个不同的VLAN/IP子网；一个子网用于所有SCA，一个独立的子网用于所有Web服务器。如果将两个场置于同一个第2层(L2)域中，则需要进行源网络地址转换(NAT)。源NAT可确保数据包返回到CSM，并且Catalyst硬件不只是L2交换机数据包。

先决条件

要求

本文档没有任何特定的要求。

使用的组件

本文档中的信息基于以下VLAN/子网：

  • 客户端：虚拟IP(VIP)和上游路由器（多层交换功能卡[MSFC]）

  • 插槽5中带有CSM的Catalyst 6500/6000

  • 服务器端1:Web 服务器

  • 服务器端2:SCAs

本文档中的信息都是基于特定实验室环境中的设备编写的。本文档中使用的所有设备最初均采用原始（默认）配置。如果您使用的是真实网络，请确保您已经了解所有命令的潜在影响。

规则

有关文档规则的详细信息，请参阅 Cisco 技术提示规则。

配置

本部分提供有关如何配置本文档所述功能的信息。

注：要查找有关本文档中所用命令的其他信息，请使用命令查找工具(仅限注册用户)(仅限注册客户)。

网络图

本文档使用以下网络设置：

oap_26341-a.gif

配置

本文档使用以下配置：

  • Catalyst 6000/CSM插槽5

  • SCA 1

  • SCA 2

Catalyst 6000/CSM插槽5 

!--- This is the configuration of nontransparent SSL load balance.

Cat6k# show running-config | begin Module 5
module ContentSwitchingModule 5
 vlan 6 client
  ip address 10.10.10.200 255.255.255.0
  gateway 10.10.10.1

!--- This is the CSM IP address on the client side and !--- CSM upstream gateway (the MSFC).

!
 vlan 4 server
  ip address 192.168.1.1 255.255.255.0

!--- This is the CSM IP address on the SCA server farm VLAN. !--- SCAs use this IP address as the default gateway.

!
 vlan 10 server
  ip address 192.168.2.1 255.255.255.0

!--- This is the CSM IP address on the web server farm VLAN. !--- The web servers use this IP address as the default gateway.

!
 static drop
  real 192.168.2.0 255.255.255.0

!--- This drops every new connection that the web servers originate, !--- unless the connection matches a VIP.

!
 serverfarm SCA443
  nat server

!--- When connections are directed to this server farm, !--- the IP address of the SCA selection replaces !--- the destination IP address.

  no nat client
  real 192.168.1.250 443
   inservice
  real 192.168.1.251 443
   inservice

!--- The configurations of both SCAs are such that, !--- with the send of a connection to this server farm, the destination port !--- translates to 443. In this example, there is no translation, as !--- the VIP listens to port 443. !--- This is different in the following server farm, SCA444.

!
 serverfarm SCA444
  nat server
  no nat client
  real 192.168.1.250 444
   inservice
  real 192.168.1.251 444
   inservice

!--- With the selection of this server farm, there is a !--- modification of connections that go to either SCA. !--- The destination IP changes to match the IP of one of the SCAs !--- (NAT server), and the destination port becomes 444.

!
 serverfarm WEBFARM
  nat server
  no nat client
  real 192.168.2.10 80
   inservice
  real 192.168.2.11 80

!--- Specify port 80 to translate from port 81 inservice. !--- (The SCA communicates on port 81, according to the SCA setup.) !--- This is a standard web server farm.

!
 sticky 10 ssl timeout 60
 sticky 20 ssl timeout 60

!--- This creates two distinct sticky groups with SSL ID as a basis. !--- The timeout is 60 seconds.

!
 vserver TESTSITE1
  virtual 10.10.10.10 tcp https
  serverfarm SCA443
  sticky 60 group 10
  persistent rebalance
  inservice

!--- The vserver for the first site (www.testsite1.com) listens !--- to 10.10.10.10 on port 443. !--- Connections go to the SCAs without a change in the !--- destination port. (See the configuration of server farm SCA443.)

!
 vserver TESTSITE2
  virtual 10.10.10.20 tcp https
  serverfarm SCA444
  sticky 60 group 20
  persistent rebalance
  inservice

!--- The vserver for the second site (www.testsite2.com) listens !--- to 10.10.10.10 on port 443. !--- Connections go to the SCAs and change the !--- destination port to 444. (See the configuration of server farm SCA444.)

!
 vserver WEB-DECRYPT
  virtual 10.10.10.100 tcp 81
  serverfarm WEBFARM
  persistent rebalance
  inservice
!

!--- This is the vserver for the plain-text connections. !--- This vserver receives connections on port 81 from the SCAs. !--- As the configuration of this vserver does not specify a VLAN, !--- the vserver can also receive connections directly !--- from the client side. !--- To prevent direct client access of this VIP, !--- you can use the VLAN 4 option. !--- You can also place this VIP in the SCA subnetwork. In that case, !--- clients do not even have a route to that subnetwork. (Clients only !--- have a route if you configure the upstream router !--- with a static route.)

SCA 1 

!--- This configures SCA in one-port, nontransparent mode. 

sca1# show run 
# 
# Cisco CSCA Device Configuration File 
# 
# Written:      Sun Feb  6 01:46:35 2106 
# Inxcfg:       version 2.3 build 200108071342 
# Device Type:  CSS-SCA 
# Device Id:    S/N 119cd6 
# Device OS:    MaxOS version 2.5.1 build 200108071341 by Dan L. Reading 

### Device ### 

mode one-port 
ip address 192.168.1.250 netmask 255.255.255.0 
hostname sca1 
password enable 
"2431245A572441713173717748626D734B35516B794F64336A51652F" 
no ip domain-name 
no rdate-server 
timezone "MST7MDT" 
no rip 
ip route 0.0.0.0 0.0.0.0 192.168.1.1 metric 1 

### Interfaces ### 

interface network 
  auto 
end 
interface server 
  auto 
end 

### Remote Management ### 

no remote-management access-list 
remote-management enable 

### SNMP Subsystem ### 

no snmp 
telnet enable 
no telnet access-list 
web-mgmt enable 
no web-mgmt access-list 

### SSL Subsystem ### 

ssl 
  server test1 create 
    ip address 10.10.10.100 
    sslport 443 
    remoteport 81 
    key default 
    cert default 
    secpolicy default 
    cachesize 20 
    no transparent 
  end 
  server test2 create 
    ip address 10.10.10.100 
    sslport 444 
    remoteport 81 
    key default 
    cert default 
    secpolicy default 
    cachesize 20 
    no transparent 
  end 
end 
sca1#

SCA 2 

!--- This configures SCA in one-port, nontransparent mode.

sca2# 
sca2# show run 
# 
# Cisco CSCA Device Configuration File 
# 
# Written:      Fri Feb 13 21:18:29 1970 
# Inxcfg:       version 2.3 build 200108071342 
# Device Type:  CSS-SCA 
# Device Id:    S/N 119ca2 
# Device OS:    MaxOS version 2.5.1 build 200108071341 by Dan L. Reading 

### Device ### 

mode one-port 
ip address 192.168.1.251 netmask 255.255.255.0 
hostname sca2 
password enable 
"2431245A572441713173717748626D734B35516B794F64336A51652F" 
no ip domain-name 
no rdate-server 
timezone "MST7MDT" 
no rip 
ip route 0.0.0.0 0.0.0.0 192.168.1.1 metric 1 

### Interfaces ### 

interface network 
  auto 
end 
interface server 
  auto 
end 

### Remote Management ### 

no remote-management access-list 
remote-management enable 

### SNMP Subsystem ### 

no snmp 
telnet enable 
no telnet access-list 
web-mgmt enable 
no web-mgmt access-list 

### SSL Subsystem ### 

ssl 
  server test1 create 
    ip address 10.10.10.100 
    sslport 443 
    remoteport 81 
    key default 
    cert default 
    secpolicy default 
    cachesize 20 
    no transparent 
  end 
  server test2 create 
    ip address 10.10.10.100 
    sslport 444 
    remoteport 81 
    key default 
    cert default 
    secpolicy default 
    cachesize 20 
    no transparent 
  end 
end 
sca2#

验证

本部分所提供的信息可用于确认您的配置是否正常工作。

命令输出解释程序工具（仅限注册用户）支持某些 show 命令，使用此工具可以查看对 show 命令输出的分析。 


!--- A client opens a connection to www.testsite1.com.

Cat6k# show module csm 5 vserver detail
TESTSITE1, state = OPERATIONAL, v_index = 10
  virtual = 10.10.10.10/32:443, TCP, service = NONE, advertise = FALSE
  idle = 3600, replicate csrp = none, vlan = ALL, pending = 0
  max parse len = 600, persist rebalance = TRUE
  conns = 1, total conns = 1
  Default policy:
    server farm = SCA443
    sticky: timer = 60, subnet = 0.0.0.0, group id = 10
  Policy           Tot Conn     Client pkts  Server pkts
  ------------------------------------------------------
  (default)        1            9            11

!--- The client connection to port 443 hits the vserver TESTSITE1 !--- and is load balanced to an SCA.

TESTSITE2, state = OPERATIONAL, v_index = 11
  virtual = 10.10.10.20/32:443, TCP, service = NONE, advertise = FALSE
  idle = 3600, replicate csrp = none, vlan = ALL, pending = 0
  max parse len = 600, persist rebalance = TRUE
  conns = 0, total conns = 0
  Default policy:
    server farm = SCA444
    sticky: timer = 60, subnet = 0.0.0.0, group id = 20
  Policy           Tot Conn     Client pkts  Server pkts
  ------------------------------------------------------
  (default)        0            0            0

WEB-DECRYPT, state = OPERATIONAL, v_index = 13
  virtual = 10.10.10.100/32:81, TCP, service = NONE, advertise = FALSE
  idle = 3600, replicate csrp = none, vlan = 4, pending = 0
  max parse len = 600, persist rebalance = TRUE
  conns = 1, total conns = 1
  Default policy:
    server farm = WEBFARM
    sticky: timer = 0, subnet = 0.0.0.0, group id = 0
  Policy           Tot Conn     Client pkts  Server pkts
  ------------------------------------------------------
  (default)        1            7            5

!--- The SCA opens a connection to 10.10.10.100 port 81, !--- which is load balanced to a web server.

Cat6k# show module csm 5 conns detail

    prot vlan source                destination           state
----------------------------------------------------------------------
In  TCP  4    192.168.1.250:4376    10.10.10.100:81       ESTAB
Out TCP  10   192.168.2.11:81       192.168.1.250:4376    ESTAB
    vs = WEB-DECRYPT, ftp = No, csrp = False

!--- This provides details of the connection from the SCA to the web server. !--- The connection comes from VLAN 4 (the SCA VLAN), destined to !--- 10.10.10.100 port 81. !--- This is different from what happens in transparent mode. !--- In this case, the SCA opens the connections with use of !--- the SCA IP address, 192.168.1.250. The server does not see the IP !--- of the original client. !--- The connection goes to VLAN 10 (web servers VLAN) !--- to the web server selection. (The destination IP address !--- changes accordingly. The port does not change.) !--- If the servers listen to port 80 instead of port 81, you can configure !--- the translation of the destination port. You can add a port !--- to the definition of the real servers.


!--- NOTE: The Out line swaps source with destination. !--- "Out" refers to the return traffic packets that the CSM !--- receives from that VLAN.

In  TCP  6    10.15.0.50:2324       10.10.10.10:443       ESTAB
Out TCP  4    192.168.1.250:443     10.15.0.50:2324       ESTAB
    vs = TESTSITE1, ftp = No, csrp = False

!--- This provides details of the connection from the client to the VIP. !--- The connection comes from VLAN 6 (the client VLAN), destined to !--- 10.10.10.10 port 443. !--- The connection goes to VLAN 4 (the SCA VLAN) !--- to the SCA selection. The destination IP changes !--- from the 10.10.10.10 (the VIP) to 192.168.1.250 (the SCA), !--- as the server farm had the option NAT server. !--- This is different in nontransparent mode. !--- The same client opens a second connection, !--- this time to www.testsite2.com.

Cat6k#
Cat6k# show module csm 5 conns detail

    prot vlan source                destination           state
----------------------------------------------------------------------
In  TCP  4    192.168.1.250:4377    10.10.10.100:81       ESTAB
Out TCP  10   192.168.2.10:81       192.168.1.250:4377    ESTAB
    vs = WEB-DECRYPT, ftp = No, csrp = False

!--- This connection is from SCA to VIP .100, load balanced to !--- web server .10.

In  TCP  4    192.168.1.250:4376    10.10.10.100:81       ESTAB
Out TCP  10   192.168.2.11:81       192.168.1.250:4376    ESTAB
    vs = WEB-DECRYPT, ftp = No, csrp = False

!--- This connection is from SCA to VIP .100, load balanced to !--- webserver .11.

In  TCP  6    10.15.0.50:2325       10.10.10.20:443       ESTAB
Out TCP  4    192.168.1.250:444     10.15.0.50:2325       ESTAB
    vs = TESTSITE2, ftp = No, csrp = False

!--- This connection is from client to VIP .20, load balanced to !--- SCA .250, port 444.

In  TCP  6    10.15.0.50:2324       10.10.10.10:443       ESTAB
Out TCP  4    192.168.1.250:443     10.15.0.50:2324       ESTAB
    vs = TESTSITE1, ftp = No, csrp = False

!--- This connection is from client to VIP .10, load balanced to !--- SCA .250, port 443.

Cat6k#show module csm 5 real detail
192.168.2.10, WEBFARM, state = OPERATIONAL
  conns = 1, maxconns = 4294967295, minconns = 0
  weight = 8, weight(admin) = 8, metric = 0, remainder = 1
  total conns established = 1, total conn failures = 0
192.168.2.11, WEBFARM, state = OPERATIONAL
  conns = 1, maxconns = 4294967295, minconns = 0
  weight = 8, weight(admin) = 8, metric = 0, remainder = 1
  total conns established = 1, total conn failures = 0
192.168.1.250:443, SCA443, state = OPERATIONAL
  conns = 1, maxconns = 4294967295, minconns = 0
  weight = 8, weight(admin) = 8, metric = 0, remainder = 1
  total conns established = 1, total conn failures = 0
192.168.1.251:443, SCA443, state = OPERATIONAL
  conns = 0, maxconns = 4294967295, minconns = 0
  weight = 8, weight(admin) = 8, metric = 0, remainder = 0
  total conns established = 0, total conn failures = 0
192.168.1.250:444, SCA444, state = OPERATIONAL
  conns = 1, maxconns = 4294967295, minconns = 0
  weight = 8, weight(admin) = 8, metric = 0, remainder = 1
  total conns established = 1, total conn failures = 0
192.168.1.251:444, SCA444, state = OPERATIONAL
  conns = 0, maxconns = 4294967295, minconns = 0
  weight = 8, weight(admin) = 8, metric = 0, remainder = 0
  total conns established = 0, total conn failures = 0

!--- This output shows that each web server has received a !--- connection. !--- The SCA .250 has received two connections, one to port 443 and !--- one to port 444. !--- The SCA .251 has not yet received any connection because !--- only two connections are open. One is open to each site !--- (10.10.10.10 and 10.10.10.20). A different port (443 or 444) !--- on the SCAs handles each site. The first !--- connection for each site goes to the first SCAs. !--- The following connection to either .10 or .20 goes to !--- .251, port 443 or 444, respectively. !--- This is SCA1 output.


!--- There is one open connection.

sca1# show netstat
Pro State Recv-Q Send-Q Local Address         Remote Address       
R-Win S-Win
---------------------------------------------------------------------------
tcp ESTAB      0      0 192.168.1.250:443     10.15.0.50:2324      
33580 16529
tcp ESTAB      0      0 192.168.1.250:4376    10.10.10.100:81      
33304 17232
udp            0      0 *:4099                *:*                      
0     0
udp            0      0 *:4098                *:*                      
0     0
tcp LISTN      0      0 *:2932                *:*                      
0     0
udp            0      0 *:2932                *:*                      
0     0
udp            0      0 *:520                 *:*                      
0     0
udp            0      0 *:514                 *:*                      
0     0
tcp LISTN      0      0 *:444                 *:*                      
0     0
tcp LISTN      0      0 *:443                 *:*                  
32768     0
tcp LISTN      0      0 *:80                  *:*                      
0     0
tcp LISTN      0      0 *:23                  *:*                      
0     0
sca1#

!--- There are two open connections.

sca1# show netstat
Pro State Recv-Q Send-Q Local Address         Remote Address       
R-Win S-Win
---------------------------------------------------------------------------
tcp ESTAB      0      0 192.168.1.250:444     10.15.0.50:2325      
33580 16529
tcp ESTAB      0      0 192.168.1.250:443     10.15.0.50:2324      
33580 16529
tcp ESTAB      0      0 192.168.1.250:4377    10.10.10.100:81      
33304 17232
tcp ESTAB      0      0 192.168.1.250:4376    10.10.10.100:81      
33304 17232
udp            0      0 *:4099                *:*                      
0     0
udp            0      0 *:4098                *:*                      
0     0
tcp LISTN      0      0 *:2932                *:*                      
0     0
udp            0      0 *:2932                *:*                      
0     0
udp            0      0 *:520                 *:*                      
0     0
udp            0      0 *:514                 *:*                      
0     0
tcp LISTN      0      0 *:444                 *:*                  
32768     0
tcp LISTN      0      0 *:443                 *:*                  
32768     0
tcp LISTN      0      0 *:80                  *:*                      
0     0
tcp LISTN      0      0 *:23                  *:*                      
0     0
sca1#

故障排除

目前没有针对此配置的故障排除信息。

修订历史记录

版本 发布日期 备注
1.0
11-Sep-2018
初始版本

此文档是否有帮助?

Feedback反馈

联系我们

本文档适用于以下产品