ISDN BRI 终端端点标识协商

下载选项

  • PDF     (243.5 KB)
    在各种设备上使用 Adobe Reader 查看
  • ePub     (85.6 KB)
    在 iPhone、iPad、Android、Sony Reader 或 Windows Phone 上使用各种应用查看
  • Mobi (Kindle)     (85.5 KB)
    在 Kindle 设备上查看或在多个设备上使用 Kindle 应用查看
已更新: 2005 年 9 月 9 日
文档 ID:12073

非歧视性语言

此产品的文档集力求使用非歧视性语言。在本文档集中，非歧视性语言是指不隐含针对年龄、残障、性别、种族身份、族群身份、性取向、社会经济地位和交叉性的歧视的语言。由于产品软件的用户界面中使用的硬编码语言、基于 RFP 文档使用的语言或引用的第三方产品使用的语言，文档中可能无法确保完全使用非歧视性语言。 深入了解思科如何使用包容性语言。

关于此翻译

思科采用人工翻译与机器翻译相结合的方式将此文档翻译成不同语言，希望全球的用户都能通过各自的语言得到支持性的内容。 请注意：即使是最好的机器翻译，其准确度也不及专业翻译人员的水平。 Cisco Systems, Inc. 对于翻译的准确性不承担任何责任，并建议您总是参考英文原始文档（已提供链接）。

简介

本文为ISDN基本速率接口(BRI)提供一个配置示例，并且描述了Cisco路由器关于终端终点标识(TEI)协商进程的行为。

先决条件

要求

本文档没有任何特定的要求。

使用的组件

本文档中的信息基于以下软件和硬件版本：

  • Cisco IOS??软件版本12.2(6)。

  • 所有硬件平台.

注意：在Cisco IOS软件版本12.2(6)和12.2(6)T中引入了isdn tei-negotiation preserve命令。

本文档中的信息都是基于特定实验室环境中的设备编写的。本文档中使用的所有设备最初均采用原始（默认）配置。如果您使用的是真实网络，请确保您已经了解所有命令的潜在影响。

规则

有关文档规则的详细信息，请参阅 Cisco 技术提示规则。

背景信息

在某些欧洲国家(例如，比利时和荷兰)，通常做法是电话公司(Telco)当BRI线路在非活动状态下一定时间后，断开ISDN第1层，处于节能的考虑。这些备选方案是可能的：

  • 在第1层停止摆动后，已经分配的TEI可以被保留。

  • Cisco IOS软件可以配置为每次第1层摆动就重新协商TEI。

配置

本部分提供有关如何配置本文档所述功能的信息。

注：要查找有关本文档中使用的命令的其他信息，请使用命令查找工具(仅注册客户)。

网络图

本文档使用以下网络设置：

bri_isdn_callback.gif

在本例中，我们使用以BRI线路连接的两个Cisco 2500路由器。

配置

本文档使用以下配置：

  • 凯文

  • 克里姆森

凯文 
kevin#show running-config
!
version 12.2                                                
service timestamps debug datetime msec
service timestamps log datetime msec
hostname kevin
!
username krimson password 
!
isdn switch-type basic-net3
!
interface BRI0
no ip address
encapsulation ppp
dialer rotary-group 1
dialer-group 1
isdn switch-type basic-net3
isdn tei-negotiation preserve
no cdp enable
ppp authentication chap
!
interface Dialer1
ip address 10.9.8.2 255.255.255.0
encapsulation ppp
dialer in-band
dialer map ip 10.9.8.1 name krimson 027208196
dialer-group 1
no cdp enable
ppp authentication chap
!
dialer-list 1 protocol ip permit
!
line con 0
 exec-timeout 0 0
line aux 0
line vty 0 4
 exec-timeout 0 0
 password 
 login
!
end

克里姆森 
krimson#show running-config
!
version 12.2                                                
!
service timestamps debug datetime msec
service timestamps log datetime msec
!
hostname krimson
!
username kevin password 
!
isdn switch-type basic-net3
!
interface BRI0
no ip address
encapsulation ppp
no ip route-cache
no ip mroute-cache
no keepalive
dialer rotary-group 1
isdn switch-type basic-net3
no fair-queue
no cdp enable
ppp authentication chap
!
interface Dialer1
ip address 10.9.8.1 255.255.255.0
encapsulation ppp
no ip route-cache
no ip mroute-cache
load-interval 30
no keepalive
dialer in-band
dialer map ip 10.9.8.2 name kevin 027202094
dialer-group 1
no fair-queue
no cdp enable
ppp authentication chap
!
dialer-list 1 protocol ip permit
!
line con 0
 exec-timeout 0 0
line aux 0
line vty 0 4
 exec-timeout 0 0
 password 
 login
!
end

验证

本部分所提供的信息可用于确认您的配置是否正常工作。

命令输出解释程序工具（仅限注册用户）支持某些 show 命令，使用此工具可以查看对 show 命令输出的分析。

  • show isdn status??？显示所有ISDN接口的状态。

kevin#show isdn status
Global ISDN Switchtype = basic-net3
ISDN BRI0 interface
dsl 0, interface ISDN Switchtype = basic-net3
Layer 1 Status:
DEACTIVATED
Layer 2 Status:
Layer 2 NOT Activated  

!--- TEI is removed

Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 0 CCBs = 0
The Free Channel Mask:  0x3
Number of L2 Discards = 0, L2 Session ID = 10
Total Allocated ISDN CCBs = 0

故障排除

本部分提供的信息可用于对配置进行故障排除。

故障排除命令

注意：在发出debug命令之前，请参阅有关Debug命令的重要信息。

  • debug isdn q921??？显示了在其ISDN接口的D信道(LAPD)上的路由器上发生的数据链路层（第2层）接入过程。

  • debug isdn q931??？显示有关本地路由器（用户端）和网络之间ISDN网络连接（第3层）的呼叫建立和拆卸的信息。

  • debug isdn events???？显示在ISDN接口的用户端（路由器上）发生的ISDN事件。

  • debug bri??？显示有关ISDN BRI路由活动的调试信息。

这是在kevin上的debug输出：

kevin#
*Mar  1 03:04:14.235: BRI: write_sid: scp = 0, wrote = 92
*Mar  1 03:04:14.235: BRI: write_sid: scp = 80, wrote = 93
*Mar  1 03:04:14.239: BRI0: DEACTIVATED, state F1, event LSD
*Mar  1 03:04:14.243: BRI: write_sid: scp = 0, wrote = 1B
*Mar  1 03:04:14.243: BRI: write_sid: scp = 0, wrote = 20
*Mar  1 03:04:14.243: BRI: write_sid: scp = 0, wrote = 92
*Mar  1 03:04:14.247: BRI: write_sid: scp = A0, wrote = 93
*Mar  1 03:04:14.247: BRI0: DEACTIVATED, state F3, event AP
*Mar  1 03:04:14.251: BRI: write_sid: scp = 0, wrote = 3
*Mar  1 03:04:14.255: ISDN BR0: Recvd MPH_IIC_IND from L1
*Mar  1 03:04:14.263: BRI: write_sid: scp = 0, wrote = 92
*Mar  1 03:04:14.263: BRI: write_sid: scp = E0, wrote = 93
*Mar  1 03:04:14.267: BRI0: PENDING, state F7, event AI
*Mar  1 03:04:14.267: BRI: Received activation indication.
*Mar  1 03:04:14.271: Flush all frames in the queue if any
*Mar  1 03:04:14.275: ISDN BR0: L1 is IF_ACTIVE
*Mar  1 03:04:14.275: ISDN BR0 EVENT: isdn_sw_cstate: State = 4, Old State = 4
*Mar  1 03:04:14.279: ISDN BR0: Incoming call id = 0x0030, dsl 0
*Mar  1 03:04:14.319: ISDN BR0: TX -> IDREQ ri=65279 ai=127
*Mar  1 03:04:14.323: BRI: write_sid: scp = 0, wrote = E
*Mar  1 03:04:14.355: ISDN BR0: RX <- IDASSN ri=65279 ai=66
*Mar  1 03:04:14.375: ISDN BR0: TX -> SABMEp c/r=0 sapi=0 tei=66
*Mar  1 03:04:14.379: BRI: write_sid: scp = 0, wrote = E
*Mar  1 03:04:14.399: ISDN BR0: RX <- UI c/r=1 sapi=0 tei=127
i=0x08011C05A1040288901801896C0A218332373230383139367009A13237323032303934
*Mar  1 03:04:14.435: SETUP pd = 8  callref = 0x1C
*Mar  1 03:04:14.443:   Sending Complete
*Mar  1 03:04:14.443:   Bearer Capability i = 0x8890
*Mar  1 03:04:14.451:   Channel ID i = 0x89
*Mar  1 03:04:14.455:   Calling Party Number i = 0x21, 0x83,
'27208196', Plan:ISDN, Type:National
*Mar  1 03:04:14.475:   Called Party Number i = 0xA1, '27202094',
Plan:ISDN, Type:National
*Mar  1 03:04:14.495: ISDN BR0: RX <- UAf c/r=0 sapi=0 tei=66
*Mar  1 03:04:14.503: %ISDN-6-LAYER2UP: Layer 2 for Interface BR0, TEI 66
changed to up
*Mar  1 03:04:14.515: CCBRI_Go Fr L3 pkt (Len=35) :
*Mar  1 03:04:14.515: 5 1 9C 90 A1 4 2 88 90 18 1 89 6C A 21 83 32 37 32 30
38 31 39 36 70 9 A1 32 37 32 30 32 30 39 34
*Mar  1 03:04:14.527:
*Mar  1 03:04:14.531: ISDN BR0: Incoming call id = 0x0031, dsl 0
*Mar  1 03:04:14.535: ISDN BR0: LIF_EVENT: ces/callid 1/0x31
HOST_INCOMING_CALL
*Mar  1 03:04:14.543: ISDN BR0: HOST_INCOMING_CALL: (non-POTS) DATA
*Mar  1 03:04:14.543: ISDN BR0: HOST_INCOMING_CALL: (1) call_type = DATA
*Mar  1 03:04:14.547: ISDN BR0: HOST_INCOMING_CALL: voice_answer_data =
FALSE call type is DATA
*Mar  1 03:04:14.551: ISDN BR0: Event: Received a DATA call from 27208196
on B1 at 64 Kb/s
*Mar  1 03:04:14.551: ISDN BR0: Event: Accepting the call id 0x31
*Mar  1 03:04:14.555: ISDN BR0: RM returned call_type 0 resource type 0
response 1
*Mar  1 03:04:14.559: CCBRI_Go Fr Host InPkgInfo (Len=9) :
*Mar  1 03:04:14.563: 7 0 1 0 31 3 18 1 89
*Mar  1 03:04:14.567:
*Mar  1 03:04:14.575: ISDN BR0: isdn_send_connect(): msg 4, call id 0x31,
ces 1 bchan 0, call type DATA
*Mar  1 03:04:14.579: BRI: enable channel B1
*Mar  1 03:04:14.579: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
*Mar  1 03:04:14.591: ISDN: get_isdn_service_state(): idb 0x230B74 bchan 2
is_isdn 1 Not a Pri
*Mar  1 03:04:14.595: CCBRI_Go Fr Host InPkgInfo (Len=6) :
*Mar  1 03:04:14.599: 4 0 1 0 31 0
*Mar  1 03:04:14.603:
*Mar  1 03:04:14.615: ISDN BR0: TX -> INFOc sapi=0 tei=66 ns=0 nr=0
i=0x08019C02180189
*Mar  1 03:04:14.627: CALL_PROC pd = 8  callref = 0x9C
*Mar  1 03:04:14.631: Channel ID i = 0x89
*Mar  1 03:04:14.639: BRI: write_sid: scp = 0, wrote = E
*Mar  1 03:04:14.663: ISDN BR0: RX <- RRr sapi=0 tei=66 nr=1
*Mar  1 03:04:14.675: ISDN BR0: TX -> INFOc sapi=0 tei=66 ns=1 nr=0
i=0x08019C07
*Mar  1 03:04:14.679: CONNECT pd = 8  callref = 0x9C
*Mar  1 03:04:14.687: BRI: write_sid: scp = 0, wrote = E
*Mar  1 03:04:14.711: ISDN BR0: RX <- RRr sapi=0 tei=66 nr=2
*Mar  1 03:04:15.567: ISDN BR0: RX <- INFOc sapi=0 tei=66 ns=0 nr=2
i=0x08011C0F
*Mar  1 03:04:15.575: CONNECT_ACK pd = 8  callref = 0x1C
*Mar  1 03:04:15.595: ISDN BR0: TX -> RRr sapi=0 tei=66 nr=1
*Mar  1 03:04:15.595: BRI: write_sid: scp = 0, wrote = E
*Mar  1 03:04:15.619: CCBRI_Go Fr L3 pkt (Len=4) :
*Mar  1 03:04:15.619: F 1 9C 92
*Mar  1 03:04:15.623:
*Mar  1 03:04:15.627: ISDN BR0: LIF_EVENT: ces/callid 1/0x31 HOST_CONNECT
*Mar  1 03:04:15.631: BRI: enable channel B1
*Mar  1 03:04:15.631: ISDN BR0: Event: Connected to 27208196 on B1 at 64 Kb/s
*Mar  1 03:04:16.223: BR0:1 DDR: dialer protocol up
*Mar  1 03:04:17.187: %LINEPROTO-5-UPDOWN: Line protocol on Interface
BRI0:1, changed state to up
*Mar  1 03:04:20.591: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to
027208196 krimson
*Mar  1 03:04:25.591: ISDN BR0: TX -> RRp sapi=0 tei=66 nr=1
*Mar  1 03:04:25.595: BRI: write_sid: scp = 0, wrote = E
*Mar  1 03:04:25.615: ISDN BR0: RX <- RRf sapi=0 tei=66 nr=2

kevin#show isdn status
Global ISDN Switchtype = basic-net3
ISDN BRI0 interface
dsl 0, interface ISDN Switchtype = basic-net3
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 66, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
I_Queue_Len 0, UI_Queue_Len 0
Layer 3 Status:
1 Active Layer 3 Call(s)
CCB:callid=31, sapi=0, ces=1, B-chan=1, calltype=DATA
Active dsl 0 CCBs = 1
The Free Channel Mask:  0x80000002
Number of L2 Discards = 0, L2 Session ID = 10
Total Allocated ISDN CCBs = 1

kevin#
*Mar  1 03:04:35.623: ISDN BR0: TX -> RRp sapi=0 tei=66 nr=1
*Mar  1 03:04:35.627: BRI: write_sid: scp = 0, wrote = E
*Mar  1 03:04:35.647: ISDN BR0: RX <- RRf sapi=0 tei=66 nr=2
*Mar  1 03:04:45.655: ISDN BR0: TX -> RRp sapi=0 tei=66 nr=1
*Mar  1 03:04:45.659: BRI: write_sid: scp = 0, wrote = E
*Mar  1 03:04:45.679: ISDN BR0: RX <- RRf sapi=0 tei=66 nr=2
*Mar  1 03:04:55.683: ISDN BR0: RX <- RRp sapi=0 tei=66 nr=2
*Mar  1 03:04:55.691: ISDN BR0: TX -> RRf sapi=0 tei=66 nr=1
*Mar  1 03:04:55.695: BRI: write_sid: scp = 0, wrote = E
*Mar  1 03:05:05.691: ISDN BR0: TX -> RRp sapi=0 tei=66 nr=1
*Mar  1 03:05:05.695: BRI: write_sid: scp = 0, wrote = E
*Mar  1 03:05:05.715: ISDN BR0: RX <- RRf sapi=0 tei=66 nr=2
*Mar  1 03:05:15.724: ISDN BR0: TX -> RRp sapi=0 tei=66 nr=1
*Mar  1 03:05:15.728: BRI: write_sid: scp = 0, wrote = E
*Mar  1 03:05:15.748: ISDN BR0: RX <- RRf sapi=0 tei=66 nr=2
*Mar  1 03:05:25.756: ISDN BR0: TX -> RRp sapi=0 tei=66 nr=1
*Mar  1 03:05:25.760: BRI: write_sid: scp = 0, wrote = E
*Mar  1 03:05:25.780: ISDN BR0: RX <- RRf sapi=0 tei=66 nr=2
*Mar  1 03:05:35.788: ISDN BR0: TX -> RRp sapi=0 tei=66 nr=1
*Mar  1 03:05:35.792: BRI: write_sid: scp = 0, wrote = E
*Mar  1 03:05:35.812: ISDN BR0: RX <- RRf sapi=0 tei=66 nr=2
*Mar  1 03:05:45.820: ISDN BR0: TX -> RRp sapi=0 tei=66 nr=1
*Mar  1 03:05:45.824: BRI: write_sid: scp = 0, wrote = E
*Mar  1 03:05:45.844: ISDN BR0: RX <- RRf sapi=0 tei=66 nr=2
*Mar  1 03:05:55.852: ISDN BR0: TX -> RRp sapi=0 tei=66 nr=1
*Mar  1 03:05:55.856: BRI: write_sid: scp = 0, wrote = E
*Mar  1 03:05:55.880: ISDN BR0: RX <- RRf sapi=0 tei=66 nr=2
*Mar  1 03:06:05.888: ISDN BR0: TX -> RRp sapi=0 tei=66 nr=1
*Mar  1 03:06:05.892: BRI: write_sid: scp = 0, wrote = E
*Mar  1 03:06:05.912: ISDN BR0: RX <- RRf sapi=0 tei=66 nr=2
*Mar  1 03:06:15.920: ISDN BR0: TX -> RRp sapi=0 tei=66 nr=1
*Mar  1 03:06:15.924: BRI: write_sid: scp = 0, wrote = E
*Mar  1 03:06:15.944: ISDN BR0: RX <- RRf sapi=0 tei=66 nr=2
*Mar  1 03:06:17.024: BR0:1 DDR: idle timeout
*Mar  1 03:06:17.028: BR0:1 DDR: disconnecting call
*Mar  1 03:06:17.028: ISDN BR0: Event: Hangup call to call id 0x31
*Mar  1 03:06:17.032: BRI: disable channel B1
*Mar  1 03:06:17.032: ISDN BR0: process_disconnect(): call id 0x31, call
type is DATA, b_idb 0x230B74, ces 1, cause Normal call clearing(0x10)
*Mar  1 03:06:17.040: %ISDN-6-DISCONNECT: Interface BRI0:1  disconnected
from 27208196 krimson, call lasted 122 seconds
*Mar  1 03:06:17.048: ISDN: get_isdn_service_state(): idb 0x230B74 bchan 2
is_isdn 1 Not a Pri
*Mar  1 03:06:17.052: CCBRI_Go Fr Host InPkgInfo (Len=13) :
*Mar  1 03:06:17.052: 5 0 1 0 31 3 8 1 90 8 2 80 90
*Mar  1 03:06:17.056:
*Mar  1 03:06:17.072: ISDN BR0: TX -> INFOc sapi=0 tei=66 ns=2 nr=1
i=0x08019C4508028090
*Mar  1 03:06:17.084:     DISCONNECT pd = 8  callref = 0x9C
*Mar  1 03:06:17.088:         Cause i = 0x8090 - Normal call clearing
*Mar  1 03:06:17.096: BRI: write_sid: scp = 0, wrote = E
*Mar  1 03:06:17.124: ISDN BR0: RX <- RRr sapi=0 tei=66 nr=3
*Mar  1 03:06:17.556: ISDN BR0: RX <- INFOc sapi=0 tei=66 ns=1 nr=3
i=0x08011C4D
*Mar  1 03:06:17.564:     RELEASE pd = 8  callref = 0x1C
*Mar  1 03:06:17.580: CCBRI_Go Fr L3 pkt (Len=4) :
*Mar  1 03:06:17.584: 4D 1 9C 97
*Mar  1 03:06:17.584:
*Mar  1 03:06:17.592: ISDN BR0: LIF_EVENT: ces/callid 1/0x31
HOST_DISCONNECT_ACK
*Mar  1 03:06:17.596: ISDN: get_isdn_service_state(): idb 0x230B74 bchan 2
is_isdn 1 Not a Pri
*Mar  1 03:06:17.600: ISDN BR0: HOST_DISCONNECT_ACK: call type is DATA
*Mar  1 03:06:17.604: BRI: disable channel B1
*Mar  1 03:06:17.604: %LINK-3-UPDOWN: Interface BRI0:1, changed state to
down
*Mar  1 03:06:17.612: BR0:1 DDR: disconnecting call
*Mar  1 03:06:17.616: ISDN BR0: LIF_EVENT: ces/callid 1/0x31
HOST_DISCONNECT_ACK
*Mar  1 03:06:17.620: ISDN: get_isdn_service_state(): idb 0x230B74 bchan 2
is_isdn 1 Not a Pri
*Mar  1 03:06:17.624: ISDN BR0: HOST_DISCONNECT_ACK: call type is DATA
*Mar  1 03:06:17.628: BRI: disable channel B1
*Mar  1 03:06:17.636: ISDN BR0: TX -> RRr sapi=0 tei=66 nr=2
*Mar  1 03:06:17.640: BRI: write_sid: scp = 0, wrote = E
*Mar  1 03:06:17.644: ISDN BR0: TX -> INFOc sapi=0 tei=66 ns=3 nr=2
i=0x08019C5A
*Mar  1 03:06:17.652: RELEASE_COMP pd = 8  callref = 0x9C
*Mar  1 03:06:17.660: BRI: write_sid: scp = 0, wrote = E
*Mar  1 03:06:17.684: ISDN BR0: RX <- RRr sapi=0 tei=66 nr=4
*Mar  1 03:06:18.940: %LINEPROTO-5-UPDOWN: Line protocol on Interface
BRI0:1, changed state to down
*Mar  1 03:06:27.693: ISDN BR0: TX -> RRp sapi=0 tei=66 nr=2
*Mar  1 03:06:27.697: BRI: write_sid: scp = 0, wrote = E
*Mar  1 03:06:27.717: ISDN BR0: RX <- RRf sapi=0 tei=66 nr=4
*Mar  1 03:06:32.781: ISDN BR0: RX <- DISCp c/r=1 sapi=0 tei=66
*Mar  1 03:06:32.785: %ISDN-6-LAYER2DOWN: Layer 2 for Interface BR0, TEI 66
changed to down
*Mar  1 03:06:32.793: ISDN BR0: TX -> UAf c/r=1 sapi=0 tei=66
*Mar  1 03:06:32.797: BRI: write_sid: scp = 0, wrote = E

kevin#show isdn status
Global ISDN Switchtype = basic-net3
ISDN BRI0 interface
dsl 0, interface ISDN Switchtype = basic-net3
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 66, Ces = 1, SAPI = 0, State = TEI_ASSIGNED  

!--- ISDN Layer 2 is disconnected

I_Queue_Len 0, UI_Queue_Len 0
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 0 CCBs = 0
The Free Channel Mask:  0x3
Number of L2 Discards = 0, L2 Session ID = 10
Total Allocated ISDN CCBs = 0

kevin#
*Mar  1 03:06:42.881: BRI: write_sid: scp = 0, wrote = 92
*Mar  1 03:06:42.885: BRI: write_sid: scp = 90, wrote = 93
*Mar  1 03:06:42.885: BRI0: ACTIVATED, state F2, event DI
*Mar  1 03:06:42.889: BRI: T4 timer started DEACT timer expired
*Mar  1 03:06:43.493: BRI: write_sid: scp = 0, wrote = 92
*Mar  1 03:06:43.493: BRI: write_sid: scp = 90, wrote = 93
*Mar  1 03:06:43.497: BRI: write_sid: scp = 0, wrote = 1
*Mar  1 03:06:43.497: BRI: write_sid: scp = 0, wrote = 0
*Mar  1 03:06:43.501: ISDN BR0 EVENT: isdn_sw_cstate: State = 0, Old State = 4
*Mar  1 03:06:43.505: BRI: disable channel B1
*Mar  1 03:06:43.505: BRI: disable channel B2
*Mar  1 03:06:43.509: ISDN BR0: Physical layer is IF_DOWN   
!--- ISDN Layer 1 deactivated due to no calls on BRI
*Mar  1 03:06:43.509: ISDN BR0: Shutting down ME
*Mar  1 03:06:43.513: ISDN BR0: Shutting down ISDN Layer 3

kevin#show isdn status
Global ISDN Switchtype = basic-net3
ISDN BRI0 interface
dsl 0, interface ISDN Switchtype = basic-net3
Layer 1 Status:
DEACTIVATED
Layer 2 Status:
TEI = 66, Ces = 1, SAPI = 0, State = TEI_ASSIGNED  

!--- TEI is preserved due to used configuration

I_Queue_Len 0, UI_Queue_Len 0
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 0 CCBs = 0
The Free Channel Mask:  0x3
Number of L2 Discards = 0, L2 Session ID = 11
Total Allocated ISDN CCBs = 0

相关信息

修订历史记录

版本 发布日期 备注
1.0
09-Sep-2005
初始版本

此文档是否有帮助?

Feedback反馈

联系我们

本文档适用于以下产品