Solucionar problemas de adição de novo PLM ao HCM-F

Opções de download

PDF (262.8 KB)
Ver no Adobe Reader em vários dispositivos
ePub (221.4 KB)
Ver em vários aplicativos no iPhone, iPad, Android, Sony Reader ou Windows Phone
Mobi (Kindle) (245.2 KB)
Ver no dispositivo Kindle ou no aplicativo Kindle em vários dispositivos

Atualizado:9 de janeiro de 2018

ID do documento:200649

Linguagem imparcial

O conjunto de documentação deste produto faz o possível para usar uma linguagem imparcial. Para os fins deste conjunto de documentação, a imparcialidade é definida como uma linguagem que não implica em discriminação baseada em idade, deficiência, gênero, identidade racial, identidade étnica, orientação sexual, status socioeconômico e interseccionalidade. Pode haver exceções na documentação devido à linguagem codificada nas interfaces de usuário do software do produto, linguagem usada com base na documentação de RFP ou linguagem usada por um produto de terceiros referenciado. Saiba mais sobre como a Cisco está usando a linguagem inclusiva.

Sobre esta tradução

A Cisco traduziu este documento com a ajuda de tecnologias de tradução automática e humana para oferecer conteúdo de suporte aos seus usuários no seu próprio idioma, independentemente da localização. Observe que mesmo a melhor tradução automática não será tão precisa quanto as realizadas por um tradutor profissional. A Cisco Systems, Inc. não se responsabiliza pela precisão destas traduções e recomenda que o documento original em inglês (link fornecido) seja sempre consultado.

Introduction

Prerequisites

Requirements

Componentes Utilizados

Problema: O administrador do HCM-F não pode adicionar uma nova instância do PLM2

Solução 1.

Solução 2.

Solução 3.

Solução 4.

Solução 5.

Informações Relacionadas

Introduction

Este documento descreve como solucionar problemas do Hosted License Manager (HLM) e do Prime License Manager (PLM) quando um novo PLM foi adicionado. Execute esta lista de verificação antes de abrir um caso no TAC.

Prerequisites

Requirements

A Cisco recomenda que você tenha conhecimento destes tópicos:

Cisco Hosted Collaboration Solution (HCS)
Cisco Hosted Collaboration Mediation Function (HCM-F)
Instalação de licença no ELM/PLM

Componentes Utilizados

As informações neste documento são baseadas nestas versões de software e hardware:

HCM-F 10.6.2
PLM 10.5.2

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

Problema: O administrador do HCM-F não pode adicionar uma nova instância do PLM2

Esta é a mensagem de erro exibida.

Para solucionar esse problema, os registros detalhados do HLM são necessários, pois várias condições podem levar ao mesmo erro de GUI.

1. Efetue login no HCM-F. A CLI ativa o nível de logs e coleta os logs.

2. Execute o comando set trace traclevel.

3. Digite o tracelevel (use CLI show traconze para localizar os níveis de rastreamento permitidos).

4. Insira o nome do serviço: Cisco HCS License Manager Service.

5. Reproduza o problema e colete os registros com este comando file get ativelog /hcs/HLM/*.

Solução 1.

Os registros de HLM mostram que o HLM não pode criar uma conexão de Transferência de Estado Representacional (REST) para o PLM devido a um tempo limite de conexão.

| 2016-09-02 04:52:55.025 | [63406] | SdlSig | CreateELMRequest | null0 | HLM(HLMCORE) | SDRUI(NBI-HLM-v90-                       LIB0) | null

2016-09-02 16:52:55,025 INFO  [63406] HLMCoreAgent:null0_CreateELMRequest is fired...

2016-09-02 16:52:55,025 INFO  [63406] HLMCoreAgent:null0_CreateELMRequest recieved

2016-09-02 16:52:55,025 INFO  [63406] HLMCoreAgent:elmName PLM2

2016-09-02 16:52:55,025 INFO  [63406] HLMCoreAgent:elmHost PLM2

2016-09-02 16:52:55,025 INFO  [63406] HLMCoreAgent:elmUser administrator

2016-09-02 16:52:55,025 INFO  [63406] HLMCoreAgent:elmPass ******

2016-09-02 16:52:55,025 INFO  [63406] HLMCoreAgent:deploymentMode HCS

2016-09-02 16:52:55,025 INFO  [63406] HLMCoreAgent:null0_CreateELMRequest opening REST connection to supplied                        LM

2016-09-02 16:52:55,025 INFO  [63406] ELMApi: init, connecting to PLM2

2016-09-02 16:52:55,025 DEBUG [63406] Got the sslCtx

2016-09-02 16:52:55,025 INFO  [63406] Initialized the context

2016-09-02 16:52:55,096 INFO  [63406] ELMApi: initialized with connection timeout, connected to PLM2

2016-09-02 16:52:55,096 INFO  [63406] HLMCoreAgent:null0_CreateELMRequest validating connection to LM

2016-09-02 16:52:55,096 DEBUG [63406] ELMApi: validateConnection Called

2016-09-02 16:52:55,097 ERROR [63406] ELMApi: ClientHanglerException caught validating connection, throwing C                       onnectException

2016-09-02 16:52:55,097 ERROR [63406] HLMCoreAgent:CreateELMRequest Exception: java.net.UnknownHostException:                        PLM2

 

---------

 

2016-09-02 16:52:55,100 DEBUG [63406] Agent: Sent message to SDRUI(NBI-HLM-v90-LIB0)

2016-09-02 16:52:55,100 DEBUG [63406] HLMCoreAgent:CreateELMResponse message was sent.

2016-09-02 16:52:55,100 ERROR [63406] Sdl...

5 | 2016-09-02 04:52:55.100 | [63406] | SdlExcept | CreateELMRequest | null0 | HLM(HLMCORE) | SDRUI(NBI-HLM-v                       90-LIB0) | Error in fire: java.net.UnknownHostException: PLM2

2016-09-02 16:52:55,101 ERROR [63406] Agent caught exception while processing message type CreateELMRequest

com.sun.jersey.api.client.ClientHandlerException: java.net.UnknownHostException: PLM2

        at com.sun.jersey.client.urlconnection.URLConnectionClientHandler.handle(URLConnectionClientHandler.j                       ava:151)

Adicione uma pesquisa direta e reversa no gerenciamento HCS do Domain Name Server (DNS) e verifique qualquer problema de conectividade, como mostrado nessas imagens.

Verificar

Execute os comandos.

 

admin:show network eth0
Ethernet 0
DHCP : disabled Status : up
IP Address : 10.48.50.70 IP Mask : 255.255.255.128
Link Detected: yes Mode : Auto disabled, Full, 1000 Mbits/s
Duplicate IP : no

DNS
Primary : 10.48.55.76 Secondary : Not Configured
Options : timeout:5 attempts:2
Domain : hcslab.com
Gateway : 10.48.50.1 on Ethernet 0

 


admin:utils network ping plm2
PING plm2.hcs10.com (10.48.50.72) 56(84) bytes of data.
64 bytes from plm2.hcs10.com (10.48.50.72): icmp_seq=1 ttl=64 time=0.484 ms
64 bytes from plm2.hcs10.com (10.48.50.72): icmp_seq=2 ttl=64 time=0.493 ms
64 bytes from plm2.hcs10.com (10.48.50.72): icmp_seq=3 ttl=64 time=0.441 ms
64 bytes from plm2.hcs10.com (10.48.50.72): icmp_seq=4 ttl=64 time=0.590 ms

--- plm2.hcs10.com ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3021ms
rtt min/avg/max/mdev = 0.441/0.502/0.590/0.054 ms

Solução 2.

Os registros de HLM mostram que o HLM pode criar uma conexão REST com a instância PLM, mas o PLM responde com a mensagem de erro "404 Not Found" (404 não foram encontrados).

2016-09-02 17:01:08,561 INFO  [63414] ELMApi: initialized with connection timeout, connected to 10.48.55.29

2016-09-02 17:01:08,561 INFO  [63414] HLMCoreAgent:null0_CreateELMRequest validating connection to LM

2016-09-02 17:01:08,561 DEBUG [63414] ELMApi: validateConnection Called

2016-09-02 17:01:08,614 ERROR [63414] HLMCoreAgent:CreateELMRequest Exception: GET https://10.48.55.29/elm-resources returned a response status of 404 Not Found

2016-09-02 17:01:08,616 DEBUG [63414] Agent: sending to [SDRUI]

-------

<com.cisco.hcs.HLM.jms.CreateELMResponse>

  <messageType>CreateELMResponse</messageType>

  <source>

    <serviceName>HLM</serviceName>

    <instance>HLMCORE</instance>

  </source>

  <destination>

    <serviceName>SDRUI</serviceName>

    <instance>NBI-HLM-v90-LIB0</instance>

  </destination>

  <sessionID>b0a354ec-6249-4cf6-ac7d-f73bac6918d4</sessionID>

  <fault>true</fault>

  <exception>

    <detailMessage>GET https://10.48.55.29/elm-resources returned a response status of 404 Not Found</detailMessage>

    <stackTrace>

      <trace>com.cisco.hcs.HLM.core.HLMCoreAgent$null0_CreateELMRequest.fire(HLMCoreAgent.java:363)</trace>

      <trace>com.cisco.hcs.hcsagent.agent.AgentFSM.fireTransition(AgentFSM.java:554)</trace>

      <trace>com.cisco.hcs.hcsagent.agent.AgentFSM.fire(AgentFSM.java:445)</trace>

      <trace>com.cisco.hcs.hcsagent.agent.Agent.process(Agent.java:324)</trace>

      <trace>com.cisco.hcs.hcsagent.agent.AgentTask.run(AgentTask.java:75)</trace>

      <trace>java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:471)</trace>

      <trace>java.util.concurrent.FutureTask.run(FutureTask.java:262)</trace>

      <trace>java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)</trace>

      <trace>java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)</trace>

      <trace>java.lang.Thread.run(Thread.java:745)</trace>

    </stackTrace>

    <suppressedExceptions class="java.util.Collections$UnmodifiableRandomAccessList" resolves-to="java.util.Collections$UnmodifiableList">

      <c class="list"/>

      <list reference="../c"/>

    </suppressedExceptions>

  </exception>

  <Fork>false</Fork>

  <requeueCount>0</requeueCount>

</com.cisco.hcs.HLM.jms.CreateELMResponse>

---------

 

2016-09-02 17:01:08,618 DEBUG [63414] Agent: Sent message to SDRUI(NBI-HLM-v90-LIB0)

2016-09-02 17:01:08,618 DEBUG [63414] HLMCoreAgent:CreateELMResponse message was sent.

2016-09-02 17:01:11,625 INFO  [63414] AgentFSM::currentState changed from null0 to null0

 

 

The PLM API services must be activeted in order to fix the issue.

Run the following commands from PLM CLI.

 

admin:utils service activate Cisco Prime LM Resource API

Service Manager is running

Cisco Prime LM Resource API[STARTED]

 

admin:utils service activate Cisco Prime LM Resource Legacy API

Service Manager is running

Cisco Prime LM Resource Legacy API[STARTED]

Verificar

Execute o comando da CLI do PLM.

admin utils service list

 

Cisco Prime LM Admin[STARTED]
Cisco Prime LM DB[STARTED]
Cisco Prime LM Resource API[STARTED]
Cisco Prime LM Resource Legacy API[STARTED]

Solução 3.

Os registros HLM mostram que o PLM é executado no modo de demonstração.

11 | 2016-09-02 05:21:07.615 | [63406] | SdlSig | CreateELMRequest | null0 | HLM(HLMCORE) | SDRUI(NBI-HLM-v90-LIB0) | null

2016-09-02 17:21:07,615 INFO  [63406] HLMCoreAgent:null0_CreateELMRequest is fired...

2016-09-02 17:21:07,615 INFO  [63406] HLMCoreAgent:null0_CreateELMRequest recieved

2016-09-02 17:21:07,615 INFO  [63406] HLMCoreAgent:elmName PLM2

2016-09-02 17:21:07,615 INFO  [63406] HLMCoreAgent:elmHost 10.48.55.29

2016-09-02 17:21:07,615 INFO  [63406] HLMCoreAgent:elmUser administrator

2016-09-02 17:21:07,615 INFO  [63406] HLMCoreAgent:elmPass ******

2016-09-02 17:21:07,615 INFO  [63406] HLMCoreAgent:deploymentMode HCS

2016-09-02 17:21:07,615 INFO  [63406] HLMCoreAgent:null0_CreateELMRequest opening REST connection to supplied LM

2016-09-02 17:21:07,615 INFO  [63406] ELMApi: init, connecting to 10.48.55.29

2016-09-02 17:21:07,615 DEBUG [63406] Got the sslCtx

2016-09-02 17:21:07,615 INFO  [63406] Initialized the context

2016-09-02 17:21:07,687 INFO  [63406] ELMApi: initialized with connection timeout, connected to 10.48.55.29

2016-09-02 17:21:07,687 INFO  [63406] HLMCoreAgent:null0_CreateELMRequest validating connection to LM

2016-09-02 17:21:07,687 DEBUG [63406] ELMApi: validateConnection Called

2016-09-02 17:21:07,795 DEBUG [63406] ELMApi: connection Validated

2016-09-02 17:21:07,795 DEBUG [63406] ELMApi: getELMReg Called

2016-09-02 17:21:07,846 INFO  [63406] HLMCoreAgent:Found LM to be in Demo Mode

2016-09-02 17:21:07,846 DEBUG [63406] HLMCoreAgent: CreateELMRequest closing the connection

2016-09-02 17:21:07,847 DEBUG [63406] Agent: sending to [SDRUI]

-------

<com.cisco.hcs.HLM.jms.CreateELMResponse>

  <messageType>CreateELMResponse</messageType>

  <source>

    <serviceName>HLM</serviceName>

    <instance>HLMCORE</instance>

  </source>

  <destination>

    <serviceName>SDRUI</serviceName>

    <instance>NBI-HLM-v90-LIB0</instance>

  </destination>

  <sessionID>ae3b7f12-d5cb-4db4-bc37-291833d00f83</sessionID>

  <fault>true</fault>

  <exception>

    <detailMessage>ELM is in demo license.</detailMessage>

    <stackTrace>

 

 

 

<com.cisco.hcs.HLM.jms.CreateELMResponse>

  <messageType>CreateELMResponse</messageType>

  <source>

    <serviceName>HLM</serviceName>

    <instance>HLMCORE</instance>

  </source>

  <destination>

    <serviceName>SDRUI</serviceName>

    <instance>NBI-HLM-v90-LIB0</instance>

  </destination>

  <sessionID>ab8cbfc5-cbe5-4c3f-8c33-324517d69d7d</sessionID>

  <fault>true</fault>

  <exception>

    <detailMessage>ELM is in demo license.</detailMessage>

    <stackTrace>

Adicione licenças HCS ao PLM e tente novamente adicionar o PLM.

Verificar

Faça login na interface de usuário do PLM e clique em Sobre. Depois de adicionar as licenças HCS, o PLM mostra uma ID de registro válida conforme mostrado na imagem:

Solução 4.

O HLM pode entrar em contato com o PLM, mas o PLM responde com a mensagem 401.

12 | 2016-09-02 05:22:51.594 | [63414] | SdlSig | CreateELMRequest | null0 | HLM(HLMCORE) | SDRUI(NBI-HLM-v90-LIB0) | null

2016-09-02 17:22:51,594 INFO  [63414] HLMCoreAgent:null0_CreateELMRequest is fired...

2016-09-02 17:22:51,594 INFO  [63414] HLMCoreAgent:null0_CreateELMRequest recieved

2016-09-02 17:22:51,595 INFO  [63414] HLMCoreAgent:elmName PLM2

2016-09-02 17:22:51,595 INFO  [63414] HLMCoreAgent:elmHost 10.48.55.29

2016-09-02 17:22:51,595 INFO  [63414] HLMCoreAgent:elmUser administrator

2016-09-02 17:22:51,595 INFO  [63414] HLMCoreAgent:elmPass ******

2016-09-02 17:22:51,595 INFO  [63414] HLMCoreAgent:deploymentMode HCS

2016-09-02 17:22:51,595 INFO  [63414] HLMCoreAgent:null0_CreateELMRequest opening REST connection to supplied LM

2016-09-02 17:22:51,595 INFO  [63414] ELMApi: init, connecting to 10.48.55.29

2016-09-02 17:22:51,595 DEBUG [63414] Got the sslCtx

2016-09-02 17:22:51,595 INFO  [63414] Initialized the context

2016-09-02 17:22:51,673 INFO  [63414] ELMApi: initialized with connection timeout, connected to 10.48.55.29

2016-09-02 17:22:51,673 INFO  [63414] HLMCoreAgent:null0_CreateELMRequest validating connection to LM

2016-09-02 17:22:51,673 DEBUG [63414] ELMApi: validateConnection Called

2016-09-02 17:22:53,546 ERROR [63414] HLMCoreAgent:CreateELMRequest Exception: GET https://10.48.55.29/elm-resources returned a response status of 401 Unauthorized

2016-09-02 17:22:53,548 DEBUG [63414] Agent: sending to [SDRUI]

-------

<com.cisco.hcs.HLM.jms.CreateELMResponse>

  <messageType>CreateELMResponse</messageType>

  <source>

    <serviceName>HLM</serviceName>

    <instance>HLMCORE</instance>

  </source>

  <destination>

    <serviceName>SDRUI</serviceName>

    <instance>NBI-HLM-v90-LIB0</instance>

  </destination>

  <sessionID>06e919ba-1c30-47bb-b72d-a4a0a1ca049c</sessionID>

  <fault>true</fault>

  <exception>

    <detailMessage>GET https://10.48.55.29/elm-resources returned a response status of 401 Unauthorized</detailMessage>

    <stackTrace>

      <trace>com.cisco.hcs.HLM.core.HLMCoreAgent$null0_CreateELMRequest.fire(HLMCoreAgent.java:363)</trace>

Adicione a ID de usuário e a senha de administrador do SO PLM.

Solução 5.

O HLM é capaz de entrar em contato com o PLM, no entanto, o PLM responde com uma versão incompatível.

2016-09-05 11:53:19,131 INFO  [63394] HLMCoreAgent:null0_CreateELMRequest is fired...

2016-09-05 11:53:19,131 INFO  [63394] HLMCoreAgent:null0_CreateELMRequest recieved

2016-09-05 11:53:19,132 INFO  [63394] HLMCoreAgent:elmName PLM11

2016-09-05 11:53:19,132 INFO  [63394] HLMCoreAgent:elmHost 10.48.53.120

2016-09-05 11:53:19,132 INFO  [63394] HLMCoreAgent:elmUser admin

2016-09-05 11:53:19,132 INFO  [63394] HLMCoreAgent:elmPass ******

2016-09-05 11:53:19,132 INFO  [63394] HLMCoreAgent:deploymentMode HCS

2016-09-05 11:53:19,132 INFO  [63394] HLMCoreAgent:null0_CreateELMRequest opening REST connection to supplied LM

2016-09-05 11:53:19,132 INFO  [63394] ELMApi: init, connecting to 10.48.53.120

2016-09-05 11:53:19,132 DEBUG [63394] Got the sslCtx

2016-09-05 11:53:19,132 INFO  [63394] Initialized the context

2016-09-05 11:53:19,206 INFO  [63394] ELMApi: initialized with connection timeout, connected to 10.48.53.120

2016-09-05 11:53:19,206 INFO  [63394] HLMCoreAgent:null0_CreateELMRequest validating connection to LM

2016-09-05 11:53:19,206 DEBUG [63394] ELMApi: validateConnection Called

2016-09-05 11:53:19,457 DEBUG [63394] ELMApi: connection Validated

2016-09-05 11:53:19,457 DEBUG [63394] ELMApi: getELMReg Called

2016-09-05 11:53:19,560 DEBUG [63394] ELMApi: getELMVer Called

2016-09-05 11:53:19,667 DEBUG [63394] HLMCoreAgent:null0_createELMRequest LM PLM11 version is 11.0.1.10000-2

2016-09-05 11:53:19,667 DEBUG [63394] hlmSDRUtil.createELM

2016-09-05 11:53:19,669 DEBUG [63394] hlmSDRUtil.getHCMFDeploymentMode

2016-09-05 11:53:19,669 DEBUG [63394] hlmSDRUtil.beginTransaction

2016-09-05 11:53:19,670 DEBUG [63394] hlmSDRUtilcommitTransaction

2016-09-05 11:53:19,671 DEBUG [63394] hlmSDRUtil.beginTransaction

2016-09-05 11:53:19,672 INFO  [63394] LM version is 11.0.1.10000-2

2016-09-05 11:53:19,673 ERROR [63394] hlmSDRUtil.createELM: SDR exception(SDRSyncSession): null

2016-09-05 11:53:19,673 DEBUG [63394] hlmSDRUtil.rollbackTransaction

2016-09-05 11:53:19,673 ERROR [63394] HLMCoreAgent:CreateELMRequest Exception: Attribute TypeELMVersion is required.

Certifique-se de que a versão do PLM adicionada é suportada pelo HCM-F e é chamada de matriz de compatibilidade do HCS.

Informações Relacionadas

Colaborado por engenheiros da Cisco

Katarina Andrassyova
Cisco TAC Engineer
Andrea Cingolani
Cisco TAC Engineer

Este documento lhe foi útil?

Feedback

Contate a Cisco

Abrir um caso de suporte
(É necessário um Contrato de Serviço da Cisco)

Solucionar problemas de adição de novo PLM ao HCM-F

Opções de download

Linguagem imparcial

Sobre esta tradução

Contents

Introduction

Prerequisites

Requirements

Componentes Utilizados

Problema: O administrador do HCM-F não pode adicionar uma nova instância do PLM2

Solução 1.

Solução 2.

Solução 3.

Solução 4.

Solução 5.

Informações Relacionadas

Colaborado por engenheiros da Cisco

Este documento lhe foi útil?

Contate a Cisco

Este documento se refere a estes produtos