Geconvergeerde toegangscontroller/NGWC AP-oplossing voor probleem met Traces

Downloadopties

PDF (196.2 KB)
Met Adobe Reader op diverse apparaten bekijken
ePub (136.0 KB)
Bekijken in diverse apps op iPhone, iPad, Android, Sony Reader of Windows Phone
Mobi (Kindle) (135.1 KB)
Op Kindle-apparaat of via Kindle-app op meerdere apparaten bekijken

Bijgewerkt:17 maart 2014

Document-id:117551

Inclusief taalgebruik

De documentatie van dit product is waar mogelijk geschreven met inclusief taalgebruik. Inclusief taalgebruik wordt in deze documentatie gedefinieerd als taal die geen discriminatie op basis van leeftijd, handicap, gender, etniciteit, seksuele oriëntatie, sociaaleconomische status of combinaties hiervan weerspiegelt. In deze documentatie kunnen uitzonderingen voorkomen vanwege bewoordingen die in de gebruikersinterfaces van de productsoftware zijn gecodeerd, die op het taalgebruik in de RFP-documentatie zijn gebaseerd of die worden gebruikt in een product van een externe partij waarnaar wordt verwezen. Lees meer over hoe Cisco gebruikmaakt van inclusief taalgebruik.

Over deze vertaling

Cisco heeft dit document vertaald via een combinatie van machine- en menselijke technologie om onze gebruikers wereldwijd ondersteuningscontent te bieden in hun eigen taal. Houd er rekening mee dat zelfs de beste machinevertaling niet net zo nauwkeurig is als die van een professionele vertaler. Cisco Systems, Inc. is niet aansprakelijk voor de nauwkeurigheid van deze vertalingen en raadt aan altijd het oorspronkelijke Engelstalige document (link) te raadplegen.

Inhoud

Inleiding

Voorwaarden

Vereisten

Gebruikte componenten

Verwante producten

AP Join Sequence

Problemen oplossen

Basisstappen

Traces van controller

Gemeenschappelijke redenen voor het onjuist aansluiten van AP

Probleem 1: AP op Catalyst 3850 Series switch is niet in het draadloze beheer VLAN.

Probleem 2: Het AP-model wordt niet ondersteund.

Probleem 3: De AP-tellingslicentie is niet ingeschakeld op de controller.

Probleem 4: Het domein van het toezicht is niet afgesloten.

Probleem 5: De draadloze mobiliteitscontroller is niet gedefinieerd.

Probleem 6: AP heeft maascode erop.

Probleem 7: AP3700 wordt aangesloten op een Catalyst 3850 Series switch die 3.3.0SE draait.

Probleem 6: De beheertijd valt buiten de geldigheidstermijn van het AP-certificaat.

Probleem 9: De AP-autorisatielijst is ingeschakeld op de WLC; het AP staat niet op de vergunningslijst.

Probleem 10: Het MIC AP Policy is uitgeschakeld.

Algemene technische tips

Inleiding

In dit document worden de sporenopdrachten beschreven die worden gebruikt om problemen op te lossen met AP (Access Point) zich bij kwesties aan te sluiten op geconvergeerde toegangscontrollers en worden een aantal van de gemeenschappelijke redenen beschreven waarom AP zich bij een storing aansluit.

Voorwaarden

Vereisten

Cisco raadt u aan basiskennis van deze onderwerpen te hebben:

Lichtgewicht access point Protocol (LWAPP)/controle en provisioning van draadloze access points (CAPWAP)
Lichtgewicht Access Point (LAP) en Wireless LAN Controller (WLC) configuraties voor basisbediening

Gebruikte componenten

De informatie in dit document is gebaseerd op een Cisco Catalyst 3850 Series switch die software versie 3.3.0 SE draait.

De informatie in dit document is gebaseerd op de apparaten in een specifieke laboratoriumomgeving. Alle apparaten die in dit document worden beschreven, hadden een opgeschoonde (standaard)configuratie. Als uw netwerk live is, moet u de potentiële impact van elke opdracht begrijpen.

Verwante producten

Dit document is van toepassing op alle geconvergeerde toegangscontrollers.

Cisco 7560 Series draadloze controllers
Cisco Catalyst 3560 Series-switches
Cisco Catalyst 3850 Series-switches

AP Join Sequence

Problemen oplossen

Basisstappen

Om een oplossing te vinden moet AP zich bij kwestie bij geconvergeerde toegangscontrollers aansluiten, deze stappen voltooien:

Bevestig dat AP een IP adres kan trekken. Voer vanuit de schakelaar waar de AP is ingestoken in:
```
#show cdp neighbor  
         detail
```
Opmerking: Voor Catalyst 3850 Series switch moet AP rechtstreeks zijn aangesloten op de Catalyst 3850 Series switch en de switchconfiguratie moet zijn:

Interfacegang <>
Toegang tot switchingmodus
Switch access VLAN x >> waar x de draadloze beheerinterface VLAN x geconfigureerd is op Catalyst 3850 Series switch.
Zorg dat de WLC het IP-adres kan pingelen en vice versa.
Controleer dat een draadloze mobiliteitscontroller (MC) op het netwerk is ingesteld. Als u bent aangemeld bij een Mobility Agent, zorg er dan voor dat de tunnelmobiliteit controller actief is.
```
#show wireless mobility summary
```
Zorg ervoor dat de AP-licentie op MC is ingeschakeld:
```
#show license right-to-use summary
```
Bevestig dat de juiste landcode is ingeschakeld:
```
#show wireless country configured 
```

Traces van controller

Als de juiste configuratie eenmaal is geïnstalleerd, als de AP faalt, kunnen de spooropdrachten voor verdere diagnose worden gebruikt. Deze spooropdrachten zijn beschikbaar op de controller om problemen op te lossen met CAPWAP en AP-toetreding:

#Trainingscapwap instellen
#Schelapap instellen
#Set-groepsapp

Op basis van de review van de sporenoutput, werden de groep-ap sporen meer relevant uitgevoerd voor AP om zich bij probleemoplossing aan te sluiten. Daarom wordt dit (ongefilterde) spoor in dit document uitvoerig besproken. Raadpleeg het gedeelte Algemene technische tips in dit document voor meer informatie over filteropties en -beperkingen op deze overtrek.

Opmerking: Monsteruitvoer (gefilterd en niet gefilterd) voor capwap en capwap is ter referentie opgenomen.

Om de standaardinstellingen van het overtrekken te bekijken, voert u het volgende in:

#show trace settings group-ap
Buffer Properties:
Feature-Name                                                                      Size        Level
--------------------------------------------------------------------------------------------------------
capwap/ap/event                                                                   0           warning
dtls/ap/event                                                                     0           warning
iosd-wireless/capwap                                                              0           warning

Feature-Name: capwap/ap/event
      Filters: None
Feature-Name: dtls/ap/event
      Filters: None
Feature-Name: iosd-wireless/capwap
      Filters: None

Opmerking: Standaard zijn er geen filters op een van de sporen ingesteld.

Om de sporenbuffer te verwijderen die overeenkomt met het groepsap-spoor
```
#set trace control group-ap clear
```

Om het sporenniveau voor het groepje-ap-sporen in te stellen, voert u het volgende in:

#set trace group-ap level ?
 debug    Debug-level messages (7)
  default  Unset Trace Level Value
  err      Error conditions (3)
  info     Informational (6)
  warning  Warning conditions (4)

Gebruik het niveau #set van de spoorgroep-ap debug tijdens het oplossen van problemen.

Voer om het overtrekniveau te controleren de volgende gegevens in:

# show trace settings group-ap
Buffer Properties:
Feature-Name                                                                      Size        Level
--------------------------------------------------------------------------------------------------------
capwap/ap/event                                                                   0           debug
dtls/ap/event                                                                     0           debug
iosd-wireless/capwap                                                              0           debug

Feature-Name: capwap/ap/event
      Filters: None
Feature-Name: dtls/ap/event
      Filters: None
Feature-Name: iosd-wireless/capwap
      Filters: None

Als u de sporenuitvoer wilt weergeven, voert u het volgende in:

# show trace messages group-ap

Detectieaanvraag/bestand

[11/14/13 14:50:17.484 UTC 702f4a 8528] f84f.57ca.3860 Discovery Request from 
10.201.234.24:18759

[11/14/13 14:50:17.484 UTC 702f4b 8528] f84f.57ca.3860 Discovery apType = 0,
apModel = AIR-CAP2602I-A-K9, Discovery supportedRadios = 0, incomingRadJoinPriority
= 1, Discovery versionNum = 167863296

[11/14/13 14:50:17.484 UTC 702f4c 8528] f84f.57ca.3860 Join Priority Processing
status =0, Incoming Ap's Priority 1, MaxLrads = 50, joined Aps =0

[11/14/13 14:50:17.484 UTC 702f4d 8528] f84f.57ca.3860 Validated Discovery request
with dest ip : 255.255.255.255 from AP  10.201.234.24. Response to be sent using
ip : 10.201.234.4

[11/14/13 14:50:17.484 UTC 702f4e 8528] Encode static AP manager 10.201.234.4,
AP count 0

[11/14/13 14:50:17.484 UTC 702f4f 8528] acEncodeMwarTypePayload encode mwarType = 0 
in capwapMwarTypePayload.

[11/14/13 14:50:17.484 UTC 702f50 8528] f84f.57ca.3860 Discovery Response sent to
10.201.234.24:18759

[11/14/13 14:50:27.484 UTC 57 8528] Connection not found in hash table - Table empty.

DTLS-handdruk

Opmerking: Dit is vanuit het standpunt van AP, dus worden alleen berichten gezien die door AP worden verstuurd.

[11/14/13 14:50:27.484 UTC 702f51 8528] DTLS connection not found, creating new
connection for 10:201:234:24 (18759) 10:201:234:4 (5246)

[11/14/13 14:50:27.484 UTC 702f52 8528] acDtlsCallback: entering...

[11/14/13 14:50:27.484 UTC 702f53 8528] acDtlsCallback: cb->code 10

[11/14/13 14:50:27.484 UTC 58 8528] Certificate installed for PKI based
authentication.

[11/14/13 14:50:27.484 UTC 59 8528] Incremented concurrent handshaking count 1

[11/14/13 14:50:27.484 UTC 5a 8528] f84f.57ca.3860 record=Handshake epoch=0
seq=0

[11/14/13 14:50:27.484 UTC 5b 8528] f84f.57ca.3860   msg=ClientHello len=44 seq=0
frag_off=0 frag_len=44

[11/14/13 14:50:27.485 UTC 5c 8528] f84f.57ca.3860 Handshake in progress...

[11/14/13 14:50:27.489 UTC 5d 8528] f84f.57ca.3860 record=Handshake epoch=0 seq=1

[11/14/13 14:50:27.489 UTC 5e 8528] f84f.57ca.3860   msg=ClientHello len=76
seq=1 frag_off=0 frag_len=76 (with cookie)

[11/14/13 14:50:27.490 UTC 5f 8528] f84f.57ca.3860 Handshake in progress...

[11/14/13 14:50:27.670 UTC 60 8528] f84f.57ca.3860 record=Handshake epoch=0 seq=2

[11/14/13 14:50:27.670 UTC 61 8528] f84f.57ca.3860   msg=Certificate len=1146
seq=2 frag_off=0 frag_len=519

[11/14/13 14:50:27.670 UTC 62 8528] f84f.57ca.3860 Handshake in progress...

[11/14/13 14:50:27.670 UTC 63 8528] f84f.57ca.3860 record=Handshake epoch=0 seq=3

[11/14/13 14:50:27.670 UTC 64 8528] f84f.57ca.3860   msg=Certificate len=1146
seq=2 frag_off=519 frag_len=519

[11/14/13 14:50:27.670 UTC 65 8528] f84f.57ca.3860 Handshake in progress...

[11/14/13 14:50:27.670 UTC 66 8528] f84f.57ca.3860 record=Handshake epoch=0 seq=4

[11/14/13 14:50:27.670 UTC 67 8528] f84f.57ca.3860   msg=Certificate len=1146
seq=2 frag_off=1038 frag_len=108

[11/14/13 14:50:27.671 UTC 702f54 8528] acDtlsCallback: entering...

[11/14/13 14:50:27.671 UTC 702f55 8528] acDtlsCallback: cb->code 3

[11/14/13 14:50:27.672 UTC 68 8528] Verify X.509 certificate from wtp
7c69.f604.9460

[11/14/13 14:50:27.673 UTC 702f56 8528] acDtlsCallback Cert validation PENDING

[11/14/13 14:50:27.673 UTC 69 8528] f84f.57ca.3860 Certificate verification -
pending...

[11/14/13 14:50:27.673 UTC 6a 8528] f84f.57ca.3860 Handshake in process..
awaiting certificate verification result..

[11/14/13 14:50:27.673 UTC 6b 8528] f84f.57ca.3860 record=Handshake epoch=0 seq=5

[11/14/13 14:50:27.673 UTC 6c 8528] f84f.57ca.3860   msg=ClientKeyExchange
len=130 seq=3 frag_off=0 frag_len=130

[11/14/13 14:50:27.673 UTC 702f57 8528] acDtlsCallback: entering...

[11/14/13 14:50:27.673 UTC 702f58 8528] acDtlsCallback: cb->code 3

[11/14/13 14:50:27.674 UTC 6d 8528] Verify X.509 certificate from wtp
7c69.f604.9460

[11/14/13 14:50:27.675 UTC 702f59 8528] acDtlsCallback Cert validation PENDING

[11/14/13 14:50:27.675 UTC 6e 8528] f84f.57ca.3860 Certificate verification -
pending...

[11/14/13 14:50:27.675 UTC 6f 8528] f84f.57ca.3860 Handshake in process..
awaiting certificate verification result..

[11/14/13 14:50:27.675 UTC 70 8528] f84f.57ca.3860 record=Handshake epoch=0 seq=6

[11/14/13 14:50:27.675 UTC 71 8528] f84f.57ca.3860   msg=CertificateVerify
len=258 seq=4 frag_off=0 frag_len=258

[11/14/13 14:50:27.675 UTC 702f5a 8528] acDtlsCallback: entering...

[11/14/13 14:50:27.675 UTC 702f5b 8528] acDtlsCallback: cb->code 3

[11/14/13 14:50:27.676 UTC 72 8528] Verify X.509 certificate from wtp 7c69.f604.9460

[11/14/13 14:50:27.676 UTC 702f5c 8528] acDtlsCallback Cert validation PENDING

[11/14/13 14:50:27.676 UTC 73 8528] f84f.57ca.3860 Certificate verification -
pending...

[11/14/13 14:50:27.676 UTC 74 8528] f84f.57ca.3860 Handshake in process..
awaiting certificate verification result..

[11/14/13 14:50:27.677 UTC 75 8528] f84f.57ca.3860 record=ChangeCipherSpec
epoch=0 seq=7

[11/14/13 14:50:27.677 UTC 702f5d 8528] acDtlsCallback: entering...

[11/14/13 14:50:27.677 UTC 702f5e 8528] acDtlsCallback: cb->code 3

[11/14/13 14:50:27.677 UTC 76 8528] Verify X.509 certificate from wtp 7c69.f604.9460

[11/14/13 14:50:27.678 UTC 702f5f 8528] acDtlsCallback Cert validation PENDING

[11/14/13 14:50:27.678 UTC 77 8528] f84f.57ca.3860 Certificate verification -
pending...

[11/14/13 14:50:27.678 UTC 78 8528] f84f.57ca.3860 Handshake in process..
awaiting certificate verification result..

[11/14/13 14:50:27.678 UTC 79 8528] f84f.57ca.3860 record=Handshake epoch=1 seq=0

[11/14/13 14:50:27.678 UTC 7a 8528] f84f.57ca.3860   msg=Unknown or Encrypted

[11/14/13 14:50:27.679 UTC 702f60 8528] acDtlsCallback: entering...

[11/14/13 14:50:27.679 UTC 702f61 8528] acDtlsCallback: cb->code 3

[11/14/13 14:50:27.679 UTC 7b 8528] Verify X.509 certificate from wtp 7c69.f604.9460

[11/14/13 14:50:27.680 UTC 702f62 8528] acDtlsCallback Cert validation PENDING

[11/14/13 14:50:27.680 UTC 7c 8528] f84f.57ca.3860 Certificate verification -
pending...

[11/14/13 14:50:27.680 UTC 7d 8528] f84f.57ca.3860 Handshake in process..
awaiting certificate verification result..

[11/14/13 14:50:27.681 UTC 7e 8528] Tickling the connection:  10.201.234.4:5246
<-> 10.201.234.24:18759.

[11/14/13 14:50:27.681 UTC 702f63 8528] acDtlsCallback: entering...

[11/14/13 14:50:27.681 UTC 702f64 8528] acDtlsCallback: cb->code 3

[11/14/13 14:50:27.682 UTC 7f 8528] Verify X.509 certificate from wtp
7c69.f604.9460  >> AP Ethernet mac

[11/14/13 14:50:27.683 UTC 702f65 8528] acDtlsCallback Cert  validation SUCCESS.

[11/14/13 14:50:27.683 UTC 80 8528] f84f.57ca.3860 Certificate verification -
passed!

[11/14/13 14:50:27.706 UTC 81 8528] f84f.57ca.3860 Connection established!

[11/14/13 14:50:27.706 UTC 702f66 8528] acDtlsCallback: entering...

[11/14/13 14:50:27.706 UTC 702f67 8528] acDtlsCallback: cb->code 0

[11/14/13 14:50:27.706 UTC 82 8528] f84f.57ca.3860 DTLS Connection 0x5789a5e0
established on local port 5246

[11/14/13 14:50:27.706 UTC 83 8528] f84f.57ca.3860 Setting DTLS MTU for link to
peer 10.201.234.24:18759

[11/14/13 14:50:27.706 UTC 84 8528] Load Balancer: Platform Not supported,
Exiting from ctrl_tunnel_lb

[11/14/13 14:50:27.706 UTC 85 8528] Capwap Control DTLS key plumbing: Get SA
resources from LB for AP IP 10.201.234.24, rc = 4

[11/14/13 14:50:27.706 UTC 86 8528] Plumbing DTLS keys for local 10.201.234.4:5246
and peer 10.201.234.24:18759, anc_sw_id 0, anc_asic_id 0, res_sw_id 0, res_asic_id 0

[11/14/13 14:50:27.706 UTC 87 8528] Created CAPWAP control DTLS engine session
10.201.234.4:5246 <-> 10.201.234.24:18759.

[11/14/13 14:50:27.706 UTC 88 8528] f84f.57ca.3860 Sending Finished using epoch 1

[11/14/13 14:50:27.706 UTC 702f68 8528] DTLS Session established server
(10.201.234.4:5246), client (10.201.234.24:18759)

[11/14/13 14:50:27.706 UTC 702f69 8528] Starting wait join timer for AP:
10.201.234.24:18759

[11/14/13 14:50:27.707 UTC 30e2 267] %DTLS: entering dtls_add_dtls_session_db_entry

[11/14/13 14:50:27.707 UTC 30e3 267] %DTLS: sip = 0xac9ea04 dip = 0xac9ea18
sport =5246 dport=18759

[11/14/13 14:50:27.707 UTC 30e4 267] %DTLS: dtls_add_dtls_session_db_entry:
anchor_port iifd : 1088ec00000003b : capwap_iifd : 0 : session type : 0 :
sw_num : 0 : asic : 0

[11/14/13 14:50:27.707 UTC 30e5 267] %DTLS: bk_sw_num : 0 bk_asic : 0

[11/14/13 14:50:27.710 UTC 89 8528] Received DTLS engine action feedback for
CAPWAP connection

[11/14/13 14:50:27.711 UTC 8a 8528] DTLS Engine Add Success received for
connection 10.201.234.4:5246 / 10.201.234.24:18759

[11/14/13 14:50:27.711 UTC 8b 8528]  Key plumb succeeded

[11/14/13 14:50:27.711 UTC 8c 8528] Decrement concurrent handshaking count 0

[11/14/13 14:50:27.711 UTC 8d 8528]  Updating state for wtp f84f.57ca.3860 ip
10.201.234.24

[11/14/13 14:50:27.711 UTC 8e 8528] CAPWAP WTP entry not yet created.

[11/14/13 14:50:27.712 UTC 702f6a 8528] Unable to find the First RCB index.
Return Value: 2

Gezamenlijke aanvraag-respons

[11/14/13 14:50:27.712 UTC 702f6b 8528] f84f.57ca.3860 Join Request from
10.201.234.24:18759

[11/14/13 14:50:27.712 UTC 702f6c 8528] f84f.57ca.3860 For phy port iif id
0x01088ec00000003b, control session - anc sw id 0, anc asic id 0, res sw id 0,
res asic id 0 in RCB for AP 10.201.234.24

[11/14/13 14:50:27.712 UTC 8f 8528] Creating WTP 0x3823a0f0 for AP f84f.57ca.3860
with hardware encryption flag = TRUE

[11/14/13 14:50:27.712 UTC 702f6d 8528] f84f.57ca.3860 Deleting AP entry
10.201.234.24:18759 from temporary database.

[11/14/13 14:50:27.712 UTC 702f6e 8528] CAPWAP Interface-Name CAPWAP  WCM Client
f84f57ca3860 used for IIF ID allocation

[11/14/13 14:50:27.712 UTC 702f6f 8528] CAPWAP IIF ID Allocation Successful!
ID:0x00d2a98000000796 for AP 10.201.234.24, AP hash 1 [This indicates generation
of a capwapx interface seen in show ip interface brief]

[11/14/13 14:50:27.712 UTC 702f70 8528] Adding Node to AVL Tree with IIF
Id:0xd2a98000000796

[11/14/13 14:50:27.712 UTC 702f71 8528] WTP IIF ID Type: 0

[11/14/13 14:50:27.712 UTC 702f72 8528] Timer created successfully for WTP
IIF ID: 0xd2a98000000796

[11/14/13 14:50:27.712 UTC 702f73 8528] Added IIF ID to AVL Tree Database
0xd2a98000000796

[11/14/13 14:50:27.712 UTC 702f74 8528] f84f.57ca.3860 Join Version: =
167863296

[11/14/13 14:50:27.712 UTC 702f75 8528] Encode static AP manager 10.201.234.4,
AP count 0

[11/14/13 14:50:27.712 UTC 702f76 8528] f84f.57ca.3860 Join resp: CAPWAP Maximum
Msg element len = 87

[11/14/13 14:50:27.712 UTC 702f77 8528] f84f.57ca.3860 Join Response sent to
10.201.234.24:18759

[11/14/13 14:50:27.712 UTC 702f78 8528] f84f.57ca.3860 CAPWAP State: Join

[11/14/13 14:50:27.712 UTC 702f79 8528] f84f.57ca.3860 capwap_ac_platform.c:767 -
Operation State 0 ===> 4

[11/14/13 14:50:27.713 UTC 702f7a 8528] f84f.57ca.3860 Register LWAPP event for AP 
f84f.57ca.3860  slot 0

[11/14/13 14:50:27.713 UTC 702f7b 8528] capwap_iif_client_action_func: myid = 1,
myid_len=1

[11/14/13 14:50:27.713 UTC 702f7c 8528] CAPWAP Interface ID Acked
Id-0x00d2a98000000796 by IIF - IIF status = 0x1001, for AP 10.201.234.24,
rcb->ap_registered = 1

[11/14/13 14:50:27.713 UTC 702f7d 8528] f84f.57ca.3860 Not ready to send
Config Status Response to AP 10.201.234.24 as SPI ACK is not received

[11/14/13 14:50:27.713 UTC 702f7e 8528] Unable to find entry for PhyIifId:
0x1088ec00000003b from AVL Tree

[11/14/13 14:50:27.713 UTC 702f7f 8528] Adding Node to Physical Iif Id AVL Tree
with PhyIifId:0x1088ec00000003b

[11/14/13 14:50:27.713 UTC 702f80 8528] Unable to find entry for PhyIifId:
0x1088ec00000003b from AVL Tree

[11/14/13 14:50:27.713 UTC 702f81 8528] f84f.57ca.3860 Register LWAPP event for
AP  f84f.57ca.3860  slot 1

[11/14/13 14:50:27.713 UTC 702f82 8528] Added PhyIifId: 0x1088ec00000003b to AVL
Tree Database

[11/14/13 14:50:27.714 UTC 702f83 8528] Get the Interface name from the
Phy-Port-IIF-ID:0x1088ec00000003b

[11/14/13 14:50:27.714 UTC 702f84 8528]

---Phy-IIF-ID = 0x1088ec00000003b------

[11/14/13 14:50:27.714 UTC 702f85 8528] f84f.57ca.3860 Not ready to send Config
Status Response to AP 10.201.234.24 as SPI ACK is not received

[11/14/13 14:50:27.714 UTC 702f86 8528] CSM-SPAM:Input monitor name after copying
from vapcb to vap data is wireless-avc-basic

[11/14/13 14:50:27.714 UTC 702f87 8528] CSM-SPAM:Output monitor name after copying
from vapcb to vapdata is wireless-avc-basic

[11/14/13 14:50:27.714 UTC 702f88 8528] CSM-SPAM:Input monitor name after copying
from vapcb to vap data is wireless-avc-basic

[11/14/13 14:50:27.714 UTC 702f89 8528] CSM-SPAM:Output monitor name after copying
from vapcb to vapdata is wireless-avc-basic

[11/14/13 14:50:27.714 UTC 702f8a 8528] RSN Capabilities: (26)

[11/14/13 14:50:27.714 UTC 702f8b 8528]      [0000] 30 18 01 00 00 0f ac 02 02
00 00 0f ac 02 00 0f

[11/14/13 14:50:27.714 UTC 702f8c 8528]      [0016] ac 04 01 00 00 0f ac 02 28 00

[11/14/13 14:50:27.714 UTC 702f8d 8528] WARP IEs: (12)

[11/14/13 14:50:27.714 UTC 702f8e 8528]      [0000] dd 0a 00 c0 b9 01 00 00
00 08 01 01

[11/14/13 14:50:27.714 UTC 702f8f 8528] f84f.57ca.3860 Not ready to send Config
Status Response to AP 10.201.234.24 as SPI ACK is not received

[11/14/13 14:50:27.715 UTC 702f90 8528] Physical interface Info: IIF-ID =
0x1088ec00000003b, Message Code = 0x802, Interface Name ->gigabitethernet1/0/24,
Interface Type = 0x92, Client N<truncated>

[11/14/13 14:50:27.715 UTC 702f91 8528] Updated AVL entry for phyIifid:
0x1088ec00000003b macAddr:f84f.57ca.3860, phyIfName: gigabitethernet1/0/24 Number
of APs on this Phy <truncated>

[11/14/13 14:50:27.725 UTC 702f92 8528] capwap opaque data f84f.57ca.3860 
length = 0

[11/14/13 14:50:27.725 UTC 702f93 8528] No update; will insert f84f.57ca.3860

Status-aanvraag-respons/respons-aanvraag-update

[11/14/13 14:50:27.869 UTC 702f94 8528] f84f.57ca.3860 Configuration Status
from 10.201.234.24:18759

[11/14/13 14:50:27.870 UTC 702f95 8528] f84f.57ca.3860 CAPWAP State: Configure

[11/14/13 14:50:27.870 UTC 702f96 8528] f84f.57ca.3860 New unsupported Payload
254 in message from AP f84f.57ca.3860, Return SUCCESS

[11/14/13 14:50:27.870 UTC 702f97 8528] f84f.57ca.3860 Decoding new unsupported
Payload 254 in message from AP f84f.57ca.3860, Return SUCCESS

[11/14/13 14:50:27.870 UTC 702f98 8528] Invalid channel 11 spacified for the AP
AP2602I-1, slotId = 0

[11/14/13 14:50:27.870 UTC 702f99 8528] Invalid channel 56 spacified for the AP
AP2602I-1, slotId = 1

[11/14/13 14:50:27.870 UTC 702f9a 8528] f84f.57ca.3860 Updating IP info for AP 
f84f.57ca.3860  -- static 0, 10.201.234.24/255.255.255.224, gtw 10.201.234.2

[11/14/13 14:50:27.870 UTC 702f9b 8528] f84f.57ca.3860 Updating IP
10.201.234.24 ===> 10.201.234.24 for AP  f84f.57ca.3860

|

[11/14/13 14:50:27.870 UTC 702fab 8528] f84f.57ca.3860 LWAPP message validation
failed for SPAM Vendor Specific Payload(104) in message of len=7 from AP 
f84f.57ca.3860

[11/14/13 14:50:27.870 UTC 702fac 8528] f84f.57ca.3860 Failed to validate vendor
specific message element

[11/14/13 14:50:27.871 UTC 702fad 8528] f84f.57ca.3860 Setting MTU to 1485

[11/14/13 14:50:27.871 UTC 702fae 8528] f84f.57ca.3860 Platform not Supported,
exiting Load Balancer function

[11/14/13 14:50:27.871 UTC 702faf 8528] load balancer rc=4 for AP 10.201.234.24,
IIF ID:0x00d2a98000000796

[11/14/13 14:50:27.871 UTC 702fb0 8528] opaque data size 0 with capwap interface
create f84f.57ca.3860

[11/14/13 14:50:27.871 UTC 702fb1 8528] spiCapwapParams->
data_tunnel.opaque_data.opaque_data_len: 0

[11/14/13 14:50:27.871 UTC 702fb2 8528] f84f.57ca.3860 Data Tunnel Create timer
started for 240 seconds timeout

[11/14/13 14:50:27.871 UTC 702fb3 8528] f84f.57ca.3860 Data Tunnel created -    
tunnel type NON_CRYPTO, load balancer support Not supported, tunnel mtu 1449,

    anc_sw_id 0, anc_asic_id 0, res_sw_id 0, res_asic_id 0

    anc_wp_iif_id 0x0000000000000000, res_wp_iif_id 0x0000000000000000

[11/14/13 14:50:27.871 UTC 702fb4 8528] f84f.57ca.3860 Not ready to send Config
Status Response to AP 10.201.234.24 as SPI ACK is not received

[11/14/13 14:50:27.871 UTC 702fb5 8528] f84f.57ca.3860 AP f84f.57ca.3860
associated. Last AP failure was due to Configuration changes,reason: 
controller reboot command

[11/14/13 14:50:27.871 UTC 30e6 260] [CAPWAP]: CAPWAP data tunnel create message.

[11/14/13 14:50:27.871 UTC 30e7 260] [CAPWAP]: capwap_data_tunnel_create called

[11/14/13 14:50:27.871 UTC 30e8 260] [CAPWAP]: Data tunnel id = 0xd2a98000000796

[11/14/13 14:50:27.871 UTC 30e9 260] [CAPWAP]: Tunnel Entry not found for AP
(10.201.234.24, 18759)

[11/14/13 14:50:27.873 UTC 30ea 260] [CAPWAP]: CAPWAP IDB init complete

[11/14/13 14:50:27.882 UTC 30eb 260] [CAPWAP]: capwap_interface_status_update:
tunnel 0xd2a98000000796 status 0

[11/14/13 14:50:27.882 UTC 30ec 260] [CAPWAP]: csb pd flag 0 opaque_data_len 0
attr opaque_data 0x00000000

[11/14/13 14:50:27.882 UTC 30ed 260] [CAPWAP]: Send capwap_data_tunnel_status_update
0 Slot-Unit 1 Unit 1 for iif_id 0xd2a98000000796 to WCM.

[11/14/13 14:50:27.882 UTC 30ee 260] [CAPWAP]: (capwap_process_fed_results) CAPWAP
FED result (0) for IIF ID: 0xd2a98000000796

[11/14/13 14:50:27.882 UTC 702fb6 8528

Received CAPWAP Tunnel SPI update opaque size 0

[11/14/13 14:50:27.882 UTC 702fb7 8528] opaque data len 0 with capwap server update

[11/14/13 14:50:27.883 UTC 702fb8 8528] f84f.57ca.3860 SPI ACK : Capwap Data
Tunnel create successful for iifid:0x00d2a98000000796 AP:10.201.234.24

[11/14/13 14:50:27.883 UTC 702fb9 8528]

Received CAPWAP interface update opaque len 0

[11/14/13 14:50:27.883 UTC 702fba 8528] SPI IifId ACK: Capwap Data Tunnel Created
Successfully for IifId: 0x00d2a98000000796 AP: 10.201.234.24

[11/14/13 14:50:27.883 UTC 702fbb 8528] f84f.57ca.3860 OK to send Config Status
Response to AP 10.201.234.24

[11/14/13 14:50:27.888 UTC 30ef 260] [CAPWAP]: Notify PM (done).

[11/14/13 14:50:27.888 UTC 30f0 260] [CAPWAP]: SNMP Register: Ca1 HWIDB 32f44570

[11/14/13 14:50:27.888 UTC 30f1 260] [CAPWAP]: capwap_port_hashitem added: slot 1
slotunit 24 vlan 1104

[11/14/13 14:50:27.888 UTC 30f2 260] [CAPWAP]: 7c69.f604.9460 is AP's mac addr

[11/14/13 14:50:27.932 UTC 702fbc 8528] Sending multicast payload to ap AP2602I-1,
mcast_mode 0, mcast group 0.0.0.0

[11/14/13 14:50:27.933 UTC 702fbd 8528] f84f.57ca.3860 Config status response sent
to 10.201.234.24:18759

[11/14/13 14:50:27.933 UTC 702fbe 8528] f84f.57ca.3860 Configuration Status
Response sent to 10:201:234:24

[11/14/13 14:50:27.933 UTC 702fbf 8528] f84f.57ca.3860 Configuration update
request for Band Select Cfg sent to 10.201.234.24:18759

[11/14/13 14:50:27.933 UTC 702fc0 8528] f84f.57ca.3860 Configuration update
request for HaConfig message sent to 10.201.234.24:18759

[11/14/13 14:50:27.934 UTC 702fc1 8528] f84f.57ca.3860 Configuration update
request for AP NGWC Qos sent to 10.201.234.24:18759

[11/14/13 14:50:28.121 UTC 702fc2 8528] f84f.57ca.3860 Change State Event
Request from 10.201.234.24:18759

[11/14/13 14:50:28.122 UTC 702fc3 8528] f84f.57ca.3860 Received LWAPP Up event
for AP  f84f.57ca.3860  slot 0!

[11/14/13 14:50:28.122 UTC 702fc4 8528] f84f.57ca.3860 Radio state change for
slot: 0 state: 2 cause: 0 detail cause: 0

[11/14/13 14:50:28.122 UTC 702fc5 8528] f84f.57ca.3860 Change State Event
Response sent to 10.201.234.24:18759

[11/14/13 14:50:28.122 UTC 702fc6 8528] f84f.57ca.3860 CAPWAP State: Run

[11/14/13 14:50:28.122 UTC 702fc7 8528] f84f.57ca.3860 Sending the remaining
config to AP 10.201.234.24:18759

[11/14/13 14:50:28.122 UTC 702fc8 8528] f84f.57ca.3860 AP Going to RUN
10.201.234.24: ConcurrentJoins: 0

 [11/14/13 14:50:28.122 UTC 702fc9 8528] f84f.57ca.3860 Configuration update
request for Init VAP-DATA for slot 1 sent to 10.201.234.24:18759

[11/14/13 14:50:28.122 UTC 702fca 8528] f84f.57ca.3860 Configuration update
request for configuring association limit params sent to 10.201.234.24:18759

[11/14/13 14:50:28.122 UTC 702fcb 8528] f84f.57ca.3860 Configuration update
request for Band Select Cfg sent to 10.201.234.24:18759

[11/14/13 14:50:28.122 UTC 702fcc 8528] f84f.57ca.3860 Configuration update
request for HaConfig message sent to 10.201.234.24:18759

[11/14/13 14:50:28.123 UTC 702fcd 8528] CAPWAP: No update, will insert
f84f.57ca.3860

[11/14/13 14:50:28.123 UTC 702fce 8528] capwap opaque data f84f.57ca.3860 
length = 0

[11/14/13 14:50:28.124 UTC 702fcf 8528] CAPWAP HA insert f84f.57ca.3860

[11/14/13 14:50:28.124 UTC 702fd0 8528] CAPWAP HA insert f84f.57ca.3860

[11/14/13 14:50:28.124 UTC 702fd1 8528] f84f.57ca.3860 Configuration update
request for PHY payload sent to 10:201:234:24

[11/14/13 14:50:28.126 UTC 702fd2 8528] f84f.57ca.3860 Configuration Update
Response from 10.201.234.24:18759

[11/14/13 14:50:28.126 UTC 702fd3 8528] f84f.57ca.3860 Configuration update
request for RrmInterferenceCtrl payload sent to 10:201:234:24

[11/14/13 14:50:28.126 UTC 702fd4 8528] f84f.57ca.3860 Configuration update
request for RrmNeighbourCtrl payload sent to 10.201.234.24

[11/14/13 14:50:28.126 UTC 702fd5 8528] f84f.57ca.3860 Configuration update
request for RrmReceiveCtrl payload sent to 10:201:234:24

[11/14/13 14:50:28.126 UTC 702fd6 8528] f84f.57ca.3860 Configuration update
request for CcxRmMeas payload sent to 10.201.234.24

[11/14/13 14:50:28.132 UTC 702fd7 8528] f84f.57ca.3860 Change State Event
Request from 10.201.234.24:18759

[11/14/13 14:50:28.132 UTC 702fd8 8528] f84f.57ca.3860 Radio state change
for slot: 1 state: 2 cause: 0 detail cause: 0

[11/14/13 14:50:28.132 UTC 702fd9 8528] f84f.57ca.3860 Change State Event
Response sent to 10.201.234.24:18759

[11/14/13 14:50:28.132 UTC 702fda 8528] f84f.57ca.3860 CAPWAP State: Run

[11/14/13 14:50:28.132 UTC 702fdb 8528] f84f.57ca.3860 Sending the remaining
config to AP 10.201.234.24:18759

[11/14/13 14:50:28.133 UTC 702fdc 8528] f84f.57ca.3860 Configuration update
request for qos pm payload payload sent to 10.201.234.24:18759

[11/14/13 14:50:28.133 UTC 702fdd 8528] f84f.57ca.3860 Received LWAPP Up
event for AP  f84f.57ca.3860  slot 1!

[11/14/13 14:50:28.133 UTC 702fde 8528] f84f.57ca.3860 Configuration update
request for PHY payload sent to 10:201:234:24

[11/14/13 14:50:28.133 UTC 702fdf 8528] f84f.57ca.3860 Configuration update
request for RrmInterferenceCtrl payload sent to 10:201:234:24

[11/14/13 14:50:28.133 UTC 702fe0 8528] f84f.57ca.3860 Configuration update
request for RrmNeighbourCtrl payload sent to 10.201.234.24

[11/14/13 14:50:28.134 UTC 702fe1 8528] f84f.57ca.3860 Configuration update
request for RrmReceiveCtrl payload sent to 10:201:234:24

[11/14/13 14:50:28.134 UTC 702fe2 8528] f84f.57ca.3860 Configuration update
request for CcxRmMeas payload sent to 10.201.234.24

[11/14/13 14:50:28.188 UTC 702fe3 8528] f84f.57ca.3860 Configuration Update
Response from 10.201.234.24:18759

[11/14/13 14:50:28.188 UTC 702fe4 8528] f84f.57ca.3860 Change State Event
Request from 10.201.234.24:18759

[11/14/13 14:50:28.188 UTC 702fe5 8528] f84f.57ca.3860 Change State Event
Response sent to 10.201.234.24:18759

[11/14/13 14:50:28.188 UTC 702fe6 8528] f84f.57ca.3860 CAPWAP State: Run

[11/14/13 14:50:28.188 UTC 702fe7 8528] f84f.57ca.3860 Sending the remaining
config to AP 10.201.234.24:18759

[11/14/13 14:50:28.194 UTC 702fe8 8528] f84f.57ca.3860 Configuration Update
Response from 10.201.234.24:18759

[11/14/13 14:50:28.194 UTC 702fe9 8528] f84f.57ca.3860 WTP Event Request
from 10.201.234.24:18759

[11/14/13 14:50:28.194 UTC 702fea 8528] f84f.57ca.3860 WTP Event Response
sent to 10.201.234.24:18759

Gemeenschappelijke redenen voor het onjuist aansluiten van AP

In deze sectie worden de gebruikelijke oorzaken van het samenvallen van AP beschreven.

Probleem 1: AP op Catalyst 3850 Series switch is niet in het draadloze beheer VLAN.

#show run interface g1/0/22

interface GigabitEthernet1/0/22
 description AP
 switchport access vlan 25
 switchport mode access

#show run | draadloze verbindingen

wireless mobility controller
wireless management interface Vlan1104

#show

*%CAPWAP-3-DISC_WIRELESS_INTERFACE_ERR1: 1 wcm:  Unable to process discovery
request from AP 0019.0737.f630 , VLAN (25) scrIp (10.10.25.13) dstIp
(255.255.255.255), could not get wireless interface belonging to this network

AP is in VLAN 25, en er is geen draadloze configuratie van de beheersinterface voor VLAN 25.

Probleem 2: Het AP-model wordt niet ondersteund.

Hier is een test van AP1131.

#show

*%CAPWAP-3-JOIN_UNSUPP_AP: 1 wcm:  Received a join request from an unsupported AP
0019.0737.f630 AP8-1131AG-eb:66 (model AIR-AP1131AG-A-K9)

Probleem 3: De AP-tellingslicentie is niet ingeschakeld op de controller.

#show licentie right-to-use summ

  License Name    Type     Count   Period left

-----------------------------------------------

  ipservices   permanent   N/A      Lifetime

  apcount      base        0        Lifetime

  apcount      adder       0        Lifetime

--------------------------------------------

License Level In Use: ipservices

License Level on Reboot: ipservices

Evaluation AP-Count: Disabled

Total AP Count Licenses: 0

AP Count Licenses In-use: 0

AP Count Licenses Remaining: 0

#show

*%LWAPP-3-AP_LICENSE_REQUEST_ERR: 1 wcm:  License request failed for AP
0c:68:03:eb:9b:20 - Check for Controller Licenses

*%CAPWAP-3-AP_DB_ALLOC: 1 wcm:  Unable to alloc AP entry in database for
10.201.234.xx:29817

Probleem 4: Het domein van het toezicht is niet afgesloten.

#toon een draadloos land

Configured Country.............................: BE  - Belgium


 Configured Country Codes

        BE  - Belgium : 802.11a Indoor,Outdoor/ 802.11b / 802.11g

#show

*%LWAPP-3-RD_ERR8: 1 wcm:  Country code (US ) not configured for AP 0c:68:03:eb:9b:20

*%LWAPP-3-RD_ERR4: 1 wcm:  Invalid regulatory domain 802.11bg:-E
802.11a:-E for AP 0c:68:03:eb:9b:20

Probleem 5: De draadloze mobiliteitscontroller is niet gedefinieerd.

#show Wireless Mobility

Mobility Agent Summary:
Mobility Role                                   : Mobility Agent
Mobility Protocol Port                          : 16666
Mobility Switch Peer Group Name                 :
Multicast IP Address                            : 0.0.0.0
DTLS Mode                                       : Enabled
Mobility Domain ID for 802.11r                  : 0xac34
Mobility Keepalive Interval                     : 10
Mobility Keepalive Count                        : 3
Mobility Control Message DSCP Value             : 0
Switch Peer Group Members Configured            : 0

Link Status is Control Link Status : Data Link Status
The status of Mobility Controller:
IP              Public IP            Link Status
------------------------------------------------
0.0.0.0         0.0.0.0              -    : -

#show

*%LWAPP-3-AP_LICENSE_REQUEST_ERR: 1 wcm:  License request failed for AP
0c:68:03:eb:9b:20 - AP License Request timedout, ensure MC link is up, Resettting AP

Probleem 6: AP heeft maascode erop.

*%CAPWAP-3-SPI_TUNNEL_CREATE_ACK_NOT_REC: 1 wcm:  Dropping  discovery request from AP
0c68.03eb.9b20 - SPI Tunnel Create Ack not received[...It occurred 3 times/sec!.]

Deze boodschap is nogal genereus en niet indicatief voor de huidige kwestie. Om verder te diagnosticeren tot extra houtkap voor dit specifieke probleem wordt toegevoegd, moet u het logbestand van de AP-console onderzoeken.

Probleem 7: AP3700 wordt aangesloten op een Catalyst 3850 Series switch die 3.3.0SE draait.

#show

*%CAPWAP-3-DISC_UNSUPPORTED_AP: 1 wcm:  Rejecting discovery request from unsupported AP
08cc.68b4.4780 [...It occurred 2 times/sec!.]

Probleem 6: De beheertijd valt buiten de geldigheidstermijn van het AP-certificaat.

#show klok

*00:14:59.459 GMT0:0 Thu Jan 1 1970

#show

*Jan  1 00:05:51.338: %PKI-3-CERTIFICATE_INVALID_NOT_YET_VALID: Certificate chain
validation has failed.  The certificate (SN: 17978AAD00000036823E) is not yet valid
Validity period starts on 04:25:46 GMT0:0 Jun 8 2013

*Jan  1 00:05:51.344: *%DTLS-4-BAD_CERT: 1 wcm:  Certificate verification failed.
Peer IP: 10.201.234.21

*Jan  1 00:05:51.344: *%DTLS-3-HANDSHAKE_FAILURE: 1 wcm:  Failed to complete DTLS handshake
with peer 10.201.234.21  Reason: no certificate returned

Probleem 9: De AP-autorisatielijst is ingeschakeld op de WLC; het AP staat niet op de vergunningslijst.

#show ap auth list

Authorize MIC APs against AAA                 : Enabled

Authorize LSC APs against Auth-List           : Disabled


APs Allowed to Join:

  AP with Manufacturing Installed Certificate : Enabled

  AP with Self-Signed Certificate             : Disabled

  AP with Locally Significant Certificate     : Disabled

#show

*%LWAPP-3-RADIUS_ERR: 1 wcm: Could not send join reply, AP authorization failed;
AP:0c:68:03:eb:9b:20

*%CAPWAP-3-DATA_TUNNEL_DELETE_ERR2: 1 wcm:  Failed to delete CAPWAP data tunnel
with interface id: 0x0 from internal database. Reason: AVL database entry not found

Probleem 10: Het MIC AP Policy is uitgeschakeld.

#show ap auth list

Authorize MIC APs against AAA                 : Disabled

LSC APs tegen autorijlijst autoriseren: Uitgeschakeld

AP's toegestaan om mee te doen:

AP met geïnstalleerde certificaat voor productieomgevingen: Uitgeschakeld

AP met zelfondertekend certificaat : Uitgeschakeld

AP met lokaal belangrijk certificaat: Uitgeschakeld

#show

*%LOG-3-Q_IND: 1 wcm:  Validation of SPAM Vendor Specific Payload failed - AP 
f8:4f:57:3b:8c:d0  
*%CAPWAP-3-ALREADY_IN_JOIN: 1 wcm:  Dropping join request from AP f84f.573b.8cd0 -
AP is already in joined state
*%CAPWAP-3-DATA_TUNNEL_DELETE_ERR2: 1 wcm:  Failed to delete CAPWAP data tunnel
with interface id: 0x0 from internal database. Reason: AVL database entry not found

Dit bericht helpt niet de oorzaak van het probleem te vinden. Maar het spoor toont dit bericht.

#show boodschap-boodschap

|

MIC AP is not allowed to join by config

|

Algemene technische tips

Deze sectie verschaft een aantal nuttige tips.

Wanneer u het proces van de probleemoplossing start, vul de eerder verzamelde sporen voor de specifieke optie uit. In dit geval, capwap, groepje-ap, en alle gefilterde sporen.
- # Opslagader instellen
- # groepering voor overtrekken instellen
- # Stel het sporencontrole in, met een filter gefilterd spoor >> Dit verwijdert de gefilterde sporen en kan niet per optie worden uitgevoerd
AP sluit zich aan bij geconvergeerde toegangscontrollers maakt gebruik van het radio MAC adres van de AP. Dus, als u een filter voor het spoor instelt, gebruik dan de radio of het basis MAC adres van het AP. Voer de showap in om de status summiere opdracht bij te voegen om het radio MAC-adres te vinden.
Emissies met certificaten worden door IOSd verwerkt en vereisen het gebruik van uitwerpselen, en niet sporen, voor verdere diagnose.
- API voor boekingen met cryptoom
- #debug crypto pki callbacks
- #debug-cryptoproxyserver
- #debug crypto pki transacties
- #debug crypto pki-berichten

Bijgedragen door Cisco-engineers

Sudha Katgeri
Cisco TAC Engineer.

Was dit document nuttig?

Feedback

Contact Cisco

Een ondersteuningscase openen
(Vereist een Cisco-servicecontract)