Inleiding
Dit document beschrijft een probleem en oplossing over Catalyst 9000 Series Switches die niet op de normale manier kunnen worden opgestart en die niet in de bootloader-prompt vallen.
Probleem
Opnieuw laden van chassis 2. De optie Actief/stand-by is mislukt in 1+1-modus.
switch: boot
attempting to boot from [flash:packages.conf]
Located file packages.conf
#
##########################################################################################################################
Validate packages: SHA-1 hash:
calculated 550C9730:667B2788:DD6F6B06:D0FFA819:01A315DA
expected 550C9730:667B2788:DD6F6B06:D0FFA819:01A315DA
Both links down, not waiting for other switches
Switch number is 2
Chassis 2 reloading, reason - Active/standby selection failed in 1+1 Mode <<<<<<
Feb 19 20:06:55.572 FP0/0: %PMAN-5-EXITACTION: Process manager is exiting: reload fp action requested
Feb 19 20:06:57
Initializing Hardware...
System Bootstrap, Version 16.6.1r [FC1], RELEASE SOFTWARE (P)
Compiled Sat 07/15/2017 8:31:57.39 by rel
Current image running:
Primary Rommon Image
Last reset cause: SoftwareReload
C9300-48U platform with 8388608 Kbytes of main memory
attempting to boot from [flash:packages.conf]
Located file packages.conf
#
##########################################################################################################################
Validate packages: SHA-1 hash:
calculated 550C9730:667B2788:DD6F6B06:D0FFA819:01A315DA
expected 550C9730:667B2788:DD6F6B06:D0FFA819:01A315DA
Een andere manier om dit probleem te identificeren is te kijken naar de STACK 1+1 bootloader variabele met het gebruik van het set commando in bootloader mode. Als u de switch in de bootloader-modus wilt activeren, klikt u op de mode knop terwijl de switch wordt opgestart.
switch: set
ABNORMAL_RESET_COUNT=0
AUTOREBOOT_RESTORE=1
BOARDID=20569
BOOT=flash:packages.conf
BSI=0
MAC_ADDR=00:ab:cd:ef:01
MANUAL_BOOT=yes
MODEL_NUM=C9300-48UXM
MODEL_REVISION_NUM=D0
MOTHERBOARD_ASSEMBLY_NUM=73-17959-06
MOTHERBOARD_REVISION_NUM=A0
MOTHERBOARD_SERIAL_NUM=XXXXXXXXXXX
RANDOM_NUM=1901228755
RET_2_RCALTS=
ROMMON_AUTOBOOT_ATTEMPT=3
STACK_1_1=2_0 <<<<<<<
SWITCH_IGNORE_STARTUP_CFG=1
SWITCH_NUMBER=2
SYSTEM_SERIAL_NUM=XXXXXXXXXXXX
TEMPLATE=access
VERSION_ID=V01
switch:
Oplossing
Unset de variabele Stack 1+1. Daarna kan deze switch normaal worden opgestart.
switch:unset STACK_1_1
switch: set
ABNORMAL_RESET_COUNT=0
AUTOREBOOT_RESTORE=1
BOARDID=20569
BOOT=flash:packages.conf
BSI=0
MAC_ADDR=00:ab:cd:ef:01
MANUAL_BOOT=yes
MODEL_NUM=C9300-48UXM
MODEL_REVISION_NUM=D0
MOTHERBOARD_ASSEMBLY_NUM=73-17959-06
MOTHERBOARD_REVISION_NUM=A0
MOTHERBOARD_SERIAL_NUM=XXXXXXXXXXX
RANDOM_NUM=1901228755
RET_2_RCALTS=
ROMMON_AUTOBOOT_ATTEMPT=3
SWITCH_IGNORE_STARTUP_CFG=1
SWITCH_NUMBER=2
SYSTEM_SERIAL_NUM=XXXXXXXXXX
TEMPLATE=access
VERSION_ID=V01
switch:
boot Zodra de Stack 1+1 bootloader-variabele is uitgeschakeld, geeft u de opdracht uit zodat de switch kan starten vanaf de boot-variabele die is ingesteld op de switch.
switch: boot
attempting to boot from [flash:packages.conf]
Located file packages.conf
#
##########################################################################################################################
Validate packages: SHA-1 hash:
calculated 550C9730:667B2788:DD6F6B06:D0FFA819:01A315DA
expected 550C9730:667B2788:DD6F6B06:D0FFA819:01A315DA
Both links down, not waiting for other switches
Switch number is 2
Gerelateerde informatie
Raadpleeg voor informatie over de modus Stack 1+1 1:1 Redundantie.
Feedback