Een LAN-naar-LAN IPsec-tunnel tussen twee routers configureren

Downloadopties

  • PDF     (286.6 KB)
    Met Adobe Reader op diverse apparaten bekijken
  • ePub     (103.0 KB)
    Bekijken in diverse apps op iPhone, iPad, Android, Sony Reader of Windows Phone
  • Mobi (Kindle)     (113.5 KB)
    Op Kindle-apparaat of via Kindle-app op meerdere apparaten bekijken
Bijgewerkt:17 oktober 2025
Document-id:71462

Inclusief taalgebruik

De documentatie van dit product is waar mogelijk geschreven met inclusief taalgebruik. Inclusief taalgebruik wordt in deze documentatie gedefinieerd als taal die geen discriminatie op basis van leeftijd, handicap, gender, etniciteit, seksuele oriëntatie, sociaaleconomische status of combinaties hiervan weerspiegelt. In deze documentatie kunnen uitzonderingen voorkomen vanwege bewoordingen die in de gebruikersinterfaces van de productsoftware zijn gecodeerd, die op het taalgebruik in de RFP-documentatie zijn gebaseerd of die worden gebruikt in een product van een externe partij waarnaar wordt verwezen. Lees meer over hoe Cisco gebruikmaakt van inclusief taalgebruik.

Over deze vertaling

Cisco heeft dit document vertaald via een combinatie van machine- en menselijke technologie om onze gebruikers wereldwijd ondersteuningscontent te bieden in hun eigen taal. Houd er rekening mee dat zelfs de beste machinevertaling niet net zo nauwkeurig is als die van een professionele vertaler. Cisco Systems, Inc. is niet aansprakelijk voor de nauwkeurigheid van deze vertalingen en raadt aan altijd het oorspronkelijke Engelstalige document (link) te raadplegen.

    Inleiding

    In dit document wordt beschreven hoe u een op beleid gebaseerde VPN via Internet Key Exchange (IKEv1) tussen twee Cisco-routers (Cisco IOS® of Cisco IOS® XE) configureert.

    Voorwaarden

    Vereisten

    Er zijn geen specifieke vereisten van toepassing op dit document.

    Gebruikte componenten

    De informatie in dit document is gebaseerd op een Cisco-router met Cisco IOS® Release 15.7. Het stelt gebruikers in staat om toegang te krijgen tot bronnen over de sites via een IPsec VPN-tunnel.

    De informatie in dit document is gebaseerd op de apparaten in een specifieke laboratoriumomgeving. Alle apparaten die in dit document worden beschreven, hadden een opgeschoonde (standaard)configuratie. Als uw netwerk live is, moet u zorgen dat u de potentiële impact van elke opdracht begrijpt.

    Conventies

    Raadpleeg Cisco Technical Tips Conventions (Conventies voor technische tips van Cisco) voor meer informatie over documentconventies.

    Configureren

    Deze sectie bevat informatie over het configureren van de functies die in dit document worden beschreven.

    Netwerkdiagram

    Het netwerk in dit document is als volgt opgebouwd:

    Network Diagram

    Opmerking: De in deze configuratie gebruikte schema’s voor IP-adressering zijn niet officieel routeerbaar op het internet. Dit zijn RFC 1918 adressen die in een laboratoriumomgeving zijn gebruikt.

    Configuraties

    Dit document gebruikt de volgende configuraties:

    Opmerking: Cisco raadt aan dat de ACL toegepast op de crypto-kaart op beide apparaten een spiegelbeeld van elkaar zijn.

    Router A 
    !--- Create an ISAKMP policy for Phase 1 negotiations for the L2L tunnels.

crypto isakmp policy 10
encryption aes
hash sha256
authentication pre-share
group 14

!--- Specify the pre-shared key and the remote peer address 
    !--- to match for the L2L tunnel.

crypto isakmp key vpnuser address 10.0.0.2

!--- Create the Phase 2 policy for IPsec negotiation.

crypto ipsec transform-set myset esp-aes esp-sha256-hmac

!--- Create an ACL for the traffic to be encrypted.
!--- In this example, the traffic from 10.1.1.0/24 to 172.16.2.0/24
!--- is encrypted. The traffic which does not match the access list 
!--- is unencrypted for the Internet.

access-list 100 permit ip 10.1.1.0 0.0.0.255 172.16.2.0 0.0.0.255

!--- Create the actual crypto map. Specify an access control list (ACL),
    !--- which defines the proxy identities (local and remote host/networks).

crypto map mymap 10 ipsec-isakmp
 set peer 10.0.0.2
 set transform-set myset
 match address 100

interface GigabitEthernet0/1
ip address 10.1.1.2 255.255.255.0

!--- Apply the crypto map on the outside interface.

interface GigabitEthernet0/0
 ip address 172.16.1.1 255.255.255.0
 crypto map mymap

!--- Route to the default gateway

ip route 0.0.0.0 0.0.0.0 172.16.1.2
    Router B 
    !--- Create an ISAKMP policy for Phase 1 negotiations for the L2L tunnels.

crypto isakmp policy 10
encryption aes
hash sha256
authentication pre-share
group 14

!--- Specify the pre-shared key and the remote peer address 
    !--- to match for the L2L tunnel.

crypto isakmp key vpnuser address 172.16.1.1

!--- Create the Phase 2 policy for IPsec negotiation.

crypto ipsec transform-set myset esp-aes esp-sha256-hmac

!--- Create an ACL for the traffic to be encrypted.
!--- In this example, the traffic from 172.16.2.0/24 to 10.1.1.0/24
!--- is encrypted. The traffic which does not match the access list 
!--- is unencrypted for the Internet.

access-list 100 permit ip 172.16.2.0 0.0.0.255 10.1.1.0 0.0.0.255

!--- Create the actual crypto map. Specify an access control list (ACL),
    !--- which defines the proxy identities (local and remote host/networks).

!
crypto map mymap 10 ipsec-isakmp
 set peer 172.16.1.1
 set transform-set myset
 match address 100

interface GigabitEthernet0/1
ip address 172.16.2.1 255.255.255.0
!

!--- Apply the crypto map on the outside interface.

interface GigabitEthernet0/0
ip address 10.0.0.2 255.255.255.0
crypto map mymap

!--- Route to the default gateway.

ip route 0.0.0.0 0.0.0.0 10.0.01

    Verifiëren

    Gebruik deze sectie om te controleren of uw configuratie goed werkt.

    De Cisco CLI Analyzer (alleen geregistreerde klanten) ondersteunt bepaalde show opdrachten. Gebruik de Cisco CLI Analyzer om een analyse van de show opdrachtuitvoer weer te geven.

    • show crypto ipsec sa - Toont de instellingen, het aantal encaps en decaps, lokale en externe proxy-identiteiten en Security Parameter Indexen (SPI's), inkomende en uitgaande, gebruikt door de huidige Security Associations (SA's).

      RouterA#show crypto ipsec sa

interface: Serial2/0
    Crypto map tag: mymap, local addr 172.16.1.1

    protected vrf: (none)
   local  ident (addr/mask/prot/port): (10.1.1.0/255.255.255.0/0/0)
   remote ident (addr/mask/prot/port): (172.16.2.0/255.255.255.0/0/0)
   current_peer 10.0.0.2 port 500
     PERMIT, flags={origin_is_acl,}
    #pkts encaps: 21, #pkts encrypt: 21, #pkts digest: 21
    #pkts decaps: 21, #pkts decrypt: 21, #pkts verify: 21
    #pkts compressed: 0, #pkts decompressed: 0
    #pkts not compressed: 0, #pkts compr. failed: 0
    #pkts not decompressed: 0, #pkts decompress failed: 0
    #send errors 0, #recv errors 0

     local crypto endpt.: 172.16.1.1, remote crypto endpt.: 10.0.0.2
     plaintext mtu 1438, path mtu 1500, ip mtu 1500, ip mtu idb GigabitEthernet0/0
     current outbound spi: 0x8767D399(2271728537)
     PFS (Y/N): N, DH group: none

     inbound esp sas:
      spi: 0x6E210372(1847657330)
        transform: esp-aes esp-sha256-hmac ,
        in use settings ={Tunnel, }
        conn id: 2007, flow_id: Onboard VPN:7, sibling_flags 80004040, crypto map: mymap
        sa timing: remaining key lifetime (k/sec): (4338240/3269)
        IV size: 16 bytes
        replay detection support: Y
        Status: ACTIVE(ACTIVE)

     inbound ah sas:

     inbound pcp sas:

     outbound esp sas:
      spi: 0x8767D399(2271728537)
        transform: esp-aes esp-sha256-hmac ,
        in use settings ={Tunnel, }
        conn id: 2008, flow_id: Onboard VPN:8, sibling_flags 80004040, crypto map: mymap
        sa timing: remaining key lifetime (k/sec): (4338240/3269)
        IV size: 16 bytes
        replay detection support: Y
        Status: ACTIVE(ACTIVE)

     outbound ah sas:

     outbound pcp sas:

    • show crypto isakmp sa - Alle huidige IKE SA's en de status weergeven.

      RouterA#show crypto isakmp sa
dst             src             state          conn-id slot status
10.0.0.2        172.16.1.1      QM_IDLE              1    0 ACTIVE
    • show crypto map - Toont de structuur van de cryptografische kaart die is gemaakt met:
      • Naam van de cryptografische kaart en volgnummer.
      • Peer-adres.
      • Naam van de toegepaste ACL samen met de lokale en externe proxy-identiteiten.
      • Waarden van de gebruikte IPsec-transformatieset.
      • Interface waarop de cryptografische kaart is gebonden.
      RouterA#show crypto map
                

Crypto Map IPv4 "mymap" 10 ipsec-isakmp
                Peer = 10.0.0.2
                Extended IP access list 100
                    access-list 100 permit ip 10.1.1.0 0.0.0.255 172.16.2.0 0.0.0.255
                Current peer: 10.0.0.2
                Security association lifetime: 4608000 kilobytes/3600 seconds
                Responder-Only (Y/N): N
                PFS (Y/N): N
                Mixed-mode : Disabled
                Transform sets={
                                myset:  { esp-aes esp-sha256-hmac  } ,
                }
                Interfaces using crypto map mymap:
                                GigabitEthernet0/0

RouterB#show crypto map
                Interfaces using crypto map NiStTeSt1:

Crypto Map IPv4 "mymap" 10 ipsec-isakmp
                Peer = 172.16.1.1
                Extended IP access list 100
                    access-list 100 permit ip 172.16.2.0 0.0.0.255 10.1.1.0 0.0.0.255
                Current peer: 10.0.0.1
                Security association lifetime: 4608000 kilobytes/3600 seconds
                Responder-Only (Y/N): N
                PFS (Y/N): N
                Mixed-mode : Disabled
                Transform sets={
                                myset:  { esp-aes esp-sha256-hmac  } ,
                }
                Interfaces using crypto map mymap:
                                GigabitEthernet0/0
    • show crypto session remote detail 
      RouterA#show crypto session remote 10.0.0.2 detail   
Crypto session current status

Interface: GigabitEthernet0/0
Uptime: 00:39:16 
Session status: UP-ACTIVE   >>>>> Status of the VPN 
Peer: 10.0.0.2 port 500 fvrf: (none) ivrf: (none)
      Phase1_id: 10.0.0.2
      Desc: (none)
  Session ID: 0
  IKEv1 SA: local 172.16.1.1/500 remote 10.0.0.2/500 Active
          Capabilities:(none) connid:1004 lifetime:23:20:43
  IPSEC FLOW: permit ip 10.1.1.0/255.255.255.0 172.16.2.0/255.255.255.0
        Active SAs: 2, origin: crypto map
        Inbound:  #pkts dec'ed 21 drop 0 life (KB/Sec) 4338240/1243
        Outbound: #pkts enc'ed 21 drop 0 life (KB/Sec) 4338240/1243


RouterB#show crypto session remote 172.16.1.1 detail
Crypto session current status

Interface: GigabitEthernet0/0
Uptime: 00:40:43
Session status: UP-ACTIVE    >>>>> Status of the VPN 
Peer: 172.16.1.1 port 500 fvrf: (none) ivrf: (none)
      Phase1_id: 172.16.1.1
      Desc: (none)
  Session ID: 0
  IKEv1 SA: local 10.0.0.2/500 remote 172.16.1.1/500 Active
          Capabilities:(none) connid:1004 lifetime:23:19:16
  IPSEC FLOW: permit ip 172.16.2.0/255.255.255.0 10.1.1.0/255.255.255.0
        Active SAs: 2, origin: crypto map
        Inbound:  #pkts dec'ed 21 drop 0 life (KB/Sec) 4271304/1156
        Outbound: #pkts enc'ed 21 drop 0 life (KB/Sec) 4271304/1156

    Problemen oplossen

    Deze sectie bevat informatie die u kunt gebruiken om problemen met de configuratie te troubleshooten.

    Opdrachten

    De Cisco CLI Analyzer (alleen geregistreerde klanten) ondersteunt bepaalde show opdrachten. Gebruik de Cisco CLI Analyzer om een analyse van de show opdrachtuitvoer weer te geven.

    Opmerking: Raadpleeg Belangrijke informatie over foutopsporingsopdrachten voordat u debug opdrachten gebruikt.

    • debug crypto isakmp - Geeft de ISAKMP-onderhandelingen van fase 1 weer.

    • debug crypto ipsec - De IPsec-onderhandelingen van fase 2 weergeven.

    Voorbeeld van output van foutopsporing

    De sample debug output is afkomstig van RouterA (initiator) voor een succesvolle VPN onderhandeling.

    Router

    RouterA#debug crypto isakmp
Jul  1 04:08:49.558: ISAKMP: (0):SA request profile is (NULL)
Jul  1 04:08:49.558: ISAKMP: (0):Created a peer struct for 10.0.0.2, peer port 500
Jul  1 04:08:49.558: ISAKMP: (0):New peer created peer = 0x2108BC48 peer_handle = 0x80000005
Jul  1 04:08:49.558: ISAKMP: (0):Locking peer struct 0x2108BC48, refcount 1 for isakmp_initiator
Jul  1 04:08:49.558: ISAKMP: (0):local port 500, remote port 500
Jul  1 04:08:49.558: ISAKMP: (0):set new node 0 to QM_IDLE
Jul  1 04:08:49.558: ISAKMP: (0):Find a dup sa in the avl tree during calling isadb_insert sa = 3DA022D8
Jul  1 04:08:49.558: ISAKMP: (0):Can not start Aggressive mode,.!
Success rate is 50 percent (1/2), round-trip min/avg/max = 1/1/1 ms
Router# trying Main mode.
Jul  1 04:08:49.558: ISAKMP: (0):found peer pre-shared key matching 10.0.0.2
Jul  1 04:08:49.558: ISAKMP: (0):constructed NAT-T vendor-rfc3947 ID
Jul  1 04:08:49.558: ISAKMP: (0):constructed NAT-T vendor-07 ID
Jul  1 04:08:49.558: ISAKMP: (0):constructed NAT-T vendor-03 ID
Jul  1 04:08:49.558: ISAKMP: (0):constructed NAT-T vendor-02 ID
Jul  1 04:08:49.558: ISAKMP: (0):Input = IKE_MESG_FROM_IPSEC, IKE_SA_REQ_MM
Jul  1 04:08:49.558: ISAKMP: (0):Old State = IKE_READY  New State = IKE_I_MM1

Jul  1 04:08:49.562: ISAKMP: (0):beginning Main Mode exchange
Jul  1 04:08:49.562: ISAKMP-PAK: (0):sending packet to 10.0.0.2 my_port 500 peer_port 500 (I) MM_NO_STATE
Jul  1 04:08:49.562: ISAKMP: (0):Sending an IKE IPv4 Packet.
Jul  1 04:08:49.690: ISAKMP-PAK: (0):received packet from 10.0.0.2 dport 500 sport 500 Global (I) MM_NO_STATE
Jul  1 04:08:49.690: ISAKMP: (0):Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH
Jul  1 04:08:49.690: ISAKMP: (0):Old State = IKE_I_MM1  New State = IKE_I_MM2

Jul  1 04:08:49.690: ISAKMP: (0):processing SA payload. message ID = 0
Jul  1 04:08:49.690: ISAKMP: (0):processing vendor id payload
Jul  1 04:08:49.690: ISAKMP: (0):vendor ID seems Unity/DPD but major 69 mismatch
Jul  1 04:08:49.690: ISAKMP: (0):vendor ID is NAT-T RFC 3947
Jul  1 04:08:49.690: ISAKMP: (0):found peer pre-shared key matching 10.0.0.2
Jul  1 04:08:49.690: ISAKMP: (0):local preshared key found
Jul  1 04:08:49.690: ISAKMP: (0):Scanning profiles for xauth ...
Jul  1 04:08:49.690: ISAKMP: (0):Checking ISAKMP transform 1 against priority 10 policy
Jul  1 04:08:49.690: ISAKMP: (0):      encryption AES-CBC
Jul  1 04:08:49.690: ISAKMP: (0):      keylength of 128
Jul  1 04:08:49.690: ISAKMP: (0):      hash SHA256
Jul  1 04:08:49.690: ISAKMP: (0):      default group 14
Jul  1 04:08:49.690: ISAKMP: (0):      auth pre-share
Jul  1 04:08:49.690: ISAKMP: (0):      life type in seconds
Jul  1 04:08:49.690: ISAKMP:      life duration (VPI) of  0x0 0x1 0x51 0x80
Jul  1 04:08:49.690: ISAKMP: (0):atts are acceptable. Next payload is 0
Jul  1 04:08:49.690: ISAKMP: (0):Acceptable atts:actual life: 0
Jul  1 04:08:49.690: ISAKMP: (0):Acceptable atts:life: 0
Jul  1 04:08:49.690: ISAKMP: (0):Fill atts in sa vpi_length:4
Jul  1 04:08:49.690: ISAKMP: (0):Fill atts in sa life_in_seconds:86400
Jul  1 04:08:49.690: ISAKMP: (0):Returning Actual lifetime: 86400
Jul  1 04:08:49.690: ISAKMP: (0):Started lifetime timer: 86400.

Jul  1 04:08:49.814: ISAKMP: (0):processing vendor id payload
Jul  1 04:08:49.814: ISAKMP: (0):vendor ID seems Unity/DPD but major 69 mismatch
Jul  1 04:08:49.814: ISAKMP: (0):vendor ID is NAT-T RFC 3947
Jul  1 04:08:49.814: ISAKMP: (0):Input = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
Jul  1 04:08:49.814: ISAKMP: (0):Old State = IKE_I_MM2  New State = IKE_I_MM2

Jul  1 04:08:49.818: ISAKMP-PAK: (0):sending packet to 10.0.0.2 my_port 500 peer_port 500 (I) MM_SA_SETUP
Jul  1 04:08:49.818: ISAKMP: (0):Sending an IKE IPv4 Packet.
Jul  1 04:08:49.818: ISAKMP: (0):Input = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
Jul  1 04:08:49.818: ISAKMP: (0):Old State = IKE_I_MM2  New State = IKE_I_MM3

Jul  1 04:08:49.978: ISAKMP-PAK: (0):received packet from 10.0.0.2 dport 500 sport 500 Global (I) MM_SA_SETUP
Jul  1 04:08:49.978: ISAKMP: (0):Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH
Jul  1 04:08:49.978: ISAKMP: (0):Old State = IKE_I_MM3  New State = IKE_I_MM4

Jul  1 04:08:49.978: ISAKMP: (0):processing KE payload. message ID = 0
Jul  1 04:08:50.138: ISAKMP: (0):processing NONCE payload. message ID = 0
Jul  1 04:08:50.138: ISAKMP: (0):found peer pre-shared key matching 10.0.0.2
Jul  1 04:08:50.138: ISAKMP: (1004):processing vendor id payload
Jul  1 04:08:50.138: ISAKMP: (1004):vendor ID is Unity
Jul  1 04:08:50.138: ISAKMP: (1004):processing vendor id payload
Jul  1 04:08:50.138: ISAKMP: (1004):vendor ID is DPD
Jul  1 04:08:50.138: ISAKMP: (1004):processing vendor id payload
Jul  1 04:08:50.138: ISAKMP: (1004):speaking to another IOS box!
Jul  1 04:08:50.138: ISAKMP: (1004):received payload type 20
Jul  1 04:08:50.138: ISAKMP: (1004):His hash no match - this node outside NAT
Jul  1 04:08:50.138: ISAKMP: (1004):received payload type 20
Jul  1 04:08:50.138: ISAKMP: (1004):No NAT Found for self or peer
Jul  1 04:08:50.138: ISAKMP: (1004):Input = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
Jul  1 04:08:50.138: ISAKMP: (1004):Old State = IKE_I_MM4  New State = IKE_I_MM4

Jul  1 04:08:50.138: ISAKMP: (1004):Send initial contact
Jul  1 04:08:50.138: ISAKMP: (1004):SA is doing
Jul  1 04:08:50.138: ISAKMP: (1004):pre-shared key authentication using id type ID_IPV4_ADDR
Jul  1 04:08:50.138: ISAKMP: (1004):ID payload
                next-payload : 8
                type         : 1
Jul  1 04:08:50.138: ISAKMP: (1004):        address      : 172.16.1.1   >>>>> IKE ID sent
Jul  1 04:08:50.138: ISAKMP: (1004):        protocol     : 17
                port         : 500
                length       : 12
Jul  1 04:08:50.138: ISAKMP: (1004):Total payload length: 12
Jul  1 04:08:50.138: ISAKMP-PAK: (1004):sending packet to 10.0.0.2 my_port 500 peer_port 500 (I) MM_KEY_EXCH
Jul  1 04:08:50.138: ISAKMP: (1004):Sending an IKE IPv4 Packet.
Jul  1 04:08:50.138: ISAKMP: (1004):Input = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
Jul  1 04:08:50.138: ISAKMP: (1004):Old State = IKE_I_MM4  New State = IKE_I_MM5

Jul  1 04:08:50.138: ISAKMP-PAK: (1004):received packet from 10.0.0.2 dport 500 sport 500 Global (I) MM_KEY_EXCH
Jul  1 04:08:50.142: ISAKMP: (1004):processing ID payload. message ID = 0
Jul  1 04:08:50.142: ISAKMP: (1004):ID payload
                next-payload : 8
                type         : 1
Jul  1 04:08:50.142: ISAKMP: (1004):        address      : 10.0.0.2   >>>>> IKE ID received
Jul  1 04:08:50.142: ISAKMP: (1004):        protocol     : 17
                port         : 500
                length       : 12
Jul  1 04:08:50.142: ISAKMP: (0):peer matches *none* of the profiles
Jul  1 04:08:50.142: ISAKMP: (1004):processing HASH payload. message ID = 0
Jul  1 04:08:50.142: ISAKMP: (1004):SA authentication status:
                authenticated
Jul  1 04:08:50.142: ISAKMP: (1004):SA has been authenticated with 10.0.0.2
Jul  1 04:08:50.142: ISAKMP: (0):Trying to insert a peer 172.16.1.1/10.0.0.2/500/,
Jul  1 04:08:50.142: ISAKMP: (0): and inserted successfully 2108BC48.
Jul  1 04:08:50.142: ISAKMP: (1004):Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH
Jul  1 04:08:50.142: ISAKMP: (1004):Old State = IKE_I_MM5  New State = IKE_I_MM6

Jul  1 04:08:50.142: ISAKMP: (1004):Input = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
Jul  1 04:08:50.142: ISAKMP: (1004):Old State = IKE_I_MM6  New State = IKE_I_MM6

Jul  1 04:08:50.142: ISAKMP: (1004):Input = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
Jul  1 04:08:50.142: ISAKMP: (1004):Old State = IKE_I_MM6  New State = IKE_P1_COMPLETE

Jul  1 04:08:50.142: ISAKMP: (1004):beginning Quick Mode exchange, M-ID of 3184909968
Jul  1 04:08:50.142: ISAKMP: (1004):QM Initiator gets spi
Jul  1 04:08:50.142: ISAKMP-PAK: (1004):sending packet to 10.0.0.2 my_port 500 peer_port 500 (I) QM_IDLE
Jul  1 04:08:50.142: ISAKMP: (1004):Sending an IKE IPv4 Packet.
Jul  1 04:08:50.142: ISAKMP: (1004):Node 3184909968, Input = IKE_MESG_INTERNAL, IKE_INIT_QM
Jul  1 04:08:50.142: ISAKMP: (1004):Old State = IKE_QM_READY  New State = IKE_QM_I_QM1
Jul  1 04:08:50.142: ISAKMP: (1004):Input = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE   >>>>> Phase1 negotiation is complete
Jul  1 04:08:50.142: ISAKMP: (1004):Old State = IKE_P1_COMPLETE  New State = IKE_P1_COMPLETE

Jul  1 04:08:50.146: ISAKMP-PAK: (1004):received packet from 10.0.0.2 dport 500 sport 500 Global (I) QM_IDLE
Jul  1 04:08:50.146: ISAKMP: (1004):processing HASH payload. message ID = 3184909968
Jul  1 04:08:50.146: ISAKMP: (1004):processing SA payload. message ID = 3184909968
Jul  1 04:08:50.146: ISAKMP: (1004):Checking IPSec proposal 1
Jul  1 04:08:50.146: ISAKMP: (1004):transform 1, ESP_AES
Jul  1 04:08:50.146: ISAKMP: (1004):   attributes in transform:
Jul  1 04:08:50.146: ISAKMP: (1004):      encaps is 1 (Tunnel)
Jul  1 04:08:50.146: ISAKMP: (1004):      SA life type in seconds
Jul  1 04:08:50.146: ISAKMP: (1004):      SA life duration (basic) of 3600
Jul  1 04:08:50.146: ISAKMP: (1004):      SA life type in kilobytes
Jul  1 04:08:50.146: ISAKMP:      SA life duration (VPI) of  0x0 0x46 0x50 0x0
Jul  1 04:08:50.146: ISAKMP: (1004):      authenticator is HMAC-SHA256
Jul  1 04:08:50.146: ISAKMP: (1004):      key length is 128
Jul  1 04:08:50.146: ISAKMP: (1004):atts are acceptable.
Jul  1 04:08:50.146: IPSEC(validate_proposal_request): proposal part #1
Jul  1 04:08:50.146: IPSEC(validate_proposal_request): proposal part #1,
  (key eng. msg.) INBOUND local= 172.16.1.1:0, remote= 10.0.0.2:0,
    local_proxy= 10.1.1.0/255.255.255.0/256/0,
    remote_proxy= 172.16.2.0/255.255.255.0/256/0,
    protocol= ESP, transform= esp-aes esp-sha256-hmac  (Tunnel),
    lifedur= 0s and 0kb,
    spi= 0x0(0), conn_id= 0, keysize= 128, flags= 0x0
Jul  1 04:08:50.146: Crypto mapdb : proxy_match
                src addr     : 10.1.1.0
                dst addr     : 172.16.2.0
                protocol     : 0
                src port     : 0
                dst port     : 0
Jul  1 04:08:50.146: (ipsec_process_proposal)Map Accepted: mymap, 10
Jul  1 04:08:50.146: ISAKMP: (1004):processing NONCE payload. message ID = 3184909968
Jul  1 04:08:50.146: ISAKMP: (1004):processing ID payload. message ID = 3184909968
Jul  1 04:08:50.146: ISAKMP: (1004):processing ID payload. message ID = 3184909968
Jul  1 04:08:50.146: ISAKMP: (1004):Node 3184909968, Input = IKE_MESG_FROM_PEER, IKE_QM_EXCH
Jul  1 04:08:50.146: ISAKMP: (1004):Old State = IKE_QM_I_QM1  New State = IKE_QM_IPSEC_INSTALL_AWAIT
Jul  1 04:08:50.146: IPSEC(key_engine): got a queue event with 1 KMI message(s)
Jul  1 04:08:50.146: Crypto mapdb : proxy_match
                src addr     : 10.1.1.0
                dst addr     : 172.16.2.0
                protocol     : 256
                src port     : 0
                dst port     : 0
Jul  1 04:08:50.146: IPSEC(crypto_ipsec_create_ipsec_sas): Map found mymap, 10
Jul  1 04:08:50.146: IPSEC(crypto_ipsec_sa_find_ident_head): reconnecting with the same proxies and peer 10.0.0.2
Jul  1 04:08:50.146: IPSEC(get_old_outbound_sa_for_peer): No outbound SA found for peer 22C55798
Jul  1 04:08:50.146: IPSEC(create_sa): sa created,
  (sa) sa_dest= 172.16.1.1, sa_proto= 50,
    sa_spi= 0x6E210372(1847657330),    >>>>> Inbound SPI 
    sa_trans= esp-aes esp-sha256-hmac , sa_conn_id= 2007
    sa_lifetime(k/sec)= (4608000/3600),
  (identity) local= 172.16.1.1:0, remote= 10.0.0.2:0,
    local_proxy= 10.1.1.0/255.255.255.0/256/0,
    remote_proxy= 172.16.2.0/255.255.255.0/256/0
Jul  1 04:08:50.146: IPSEC(create_sa): sa created,
  (sa) sa_dest= 10.0.0.2, sa_proto= 50,
    sa_spi= 0x8767D399(2271728537),   >>>>> Outbound SPI
    sa_trans= esp-aes esp-sha256-hmac , sa_conn_id= 2008
    sa_lifetime(k/sec)= (4608000/3600),
  (identity) local= 172.16.1.1:0, remote= 10.0.0.2:0,
    local_proxy= 10.1.1.0/255.255.255.0/256/0,
    remote_proxy= 172.16.2.0/255.255.255.0/256/0
Jul  1 04:08:50.150: IPSEC: Expand action denied, notify RP
Jul  1 04:08:50.150: ISAKMP-ERROR: (0):Failed to find peer index node to update peer_info_list
Jul  1 04:08:50.150: ISAKMP: (1004):Received IPSec Install callback... proceeding with the negotiation
Jul  1 04:08:50.150: ISAKMP: (1004):Successfully installed IPSEC SA (SPI:0x6E210372) on GigabitEthernet0/0   >>>>> IPsec SA is installed
Jul  1 04:08:50.150: ISAKMP-PAK: (1004):sending packet to 10.0.0.2 my_port 500 peer_port 500 (I) QM_IDLE
Jul  1 04:08:50.150: ISAKMP: (1004):Sending an IKE IPv4 Packet.
Jul  1 04:08:50.150: ISAKMP: (1004):deleting node -1110057328 error FALSE reason "No Error"
Jul  1 04:08:50.150: ISAKMP: (1004):Node 3184909968, Input = IKE_MESG_FROM_IPSEC, IPSEC_INSTALL_DONE
Jul  1 04:08:50.150: ISAKMP: (1004):Old State = IKE_QM_IPSEC_INSTALL_AWAIT  New State = IKE_QM_PHASE2_COMPLETE >>>>> Phase2 negotiation is complete
Jul  1 04:08:50.950: ISAKMP: (1003):purging node -262896492
Jul  1 04:09:09.710: ISAKMP: (1003):purging SA., sa=3DA05D84, delme=3DA05D84

    Gerelateerde informatie

    Revisiegeschiedenis

    Revisie Publicatiedatum Opmerkingen
    4.0
    17-Oct-2025
    Bijgewerkte SEO- en MDF-tags.
    3.0
    03-Aug-2023
    Bijgewerkte introductie, SEO, branding vereisten, stijl vereisten en opmaak.
    2.0
    05-Jul-2022
    Het document is bijgewerkt naar Cisco IOS Release 15.7
    1.0
    12-Sep-2006
    Eerste vrijgave
    TAC Authored

    Bijgedragen door Cisco-engineers

    • Mrutunjay Sethi
      technisch adviseur

    Was dit document nuttig?

    FeedbackFeedback

    Contact Cisco

    Dit document is van toepassing op deze producten