VPN MPLS over ATM configureren met Cisco 7500 routers en LightStream 1010 Switches

Downloadopties

  • PDF     (297.1 KB)
    Met Adobe Reader op diverse apparaten bekijken
  • ePub     (116.2 KB)
    Bekijken in diverse apps op iPhone, iPad, Android, Sony Reader of Windows Phone
  • Mobi (Kindle)     (135.6 KB)
    Op Kindle-apparaat of via Kindle-app op meerdere apparaten bekijken
Bijgewerkt:5 juni 2005
Document-id:10533

Inclusief taalgebruik

De documentatie van dit product is waar mogelijk geschreven met inclusief taalgebruik. Inclusief taalgebruik wordt in deze documentatie gedefinieerd als taal die geen discriminatie op basis van leeftijd, handicap, gender, etniciteit, seksuele oriëntatie, sociaaleconomische status of combinaties hiervan weerspiegelt. In deze documentatie kunnen uitzonderingen voorkomen vanwege bewoordingen die in de gebruikersinterfaces van de productsoftware zijn gecodeerd, die op het taalgebruik in de RFP-documentatie zijn gebaseerd of die worden gebruikt in een product van een externe partij waarnaar wordt verwezen. Lees meer over hoe Cisco gebruikmaakt van inclusief taalgebruik.

Over deze vertaling

Cisco heeft dit document vertaald via een combinatie van machine- en menselijke technologie om onze gebruikers wereldwijd ondersteuningscontent te bieden in hun eigen taal. Houd er rekening mee dat zelfs de beste machinevertaling niet net zo nauwkeurig is als die van een professionele vertaler. Cisco Systems, Inc. is niet aansprakelijk voor de nauwkeurigheid van deze vertalingen en raadt aan altijd het oorspronkelijke Engelstalige document (link) te raadplegen.

Inleiding

Dit document toont hoe u Virtual Private Network (VPN) Multiprotocol Label Switching (MPLS) over ATM met Cisco 7500 switches kunt configureren als Label Edge-routers (LSR’s) en LightStream 1010 als Label Switch Routers (LSR’s). Twee Ethernet-verbonden routers, elk op een externe klantlocatie, maken deel uit van een VPN. In dit document, bekijken wij de apparatenconfiguraties van begin tot eind en nuttig toont bevelen.

Voorwaarden

Vereisten

Er zijn geen specifieke vereisten van toepassing op dit document.

Conventies

Raadpleeg Cisco Technical Tips Conventions (Conventies voor technische tips van Cisco) voor meer informatie over documentconventies.

Configureren

Deze sectie bevat informatie over het configureren van de functies die in dit document worden beschreven.

Netwerkdiagram

Het netwerk in dit document is als volgt opgebouwd:

vpn-mpls-1.gif

Netwerkbeschrijving

De huidige setup bevat deze elementen in VPN-terminologie:

  • CE = Customer Edge-router

  • PE = Provider Edge-router

  • P=Provider router

De huidige setup bevat deze elementen in MPLS-terminologie:

  • LRE = Label Edge-router

  • LSR = Label Switch-router

  • TDP/LDP = Tag Distribution Protocol/Label Distribution Protocol

Configuraties

Dit document gebruikt de volgende configuraties:

  • PE1 en PE2 zijn de LERS in ons ATM-netwerk.

  • P1 en P2 zijn de LSR’s.

  • CE1 en CE2 zijn Customer Edge-routers die zich niet bewust zijn en geen VPN of MPLS uitvoeren.

  • CE1 en CE2 zijn Ethernet verbonden met respectievelijk PE1 en PE2 en voeren een Routing Information Protocol (RIP) uit.

  • PE1, PE2, P1 en P2 doen Open Kortste Pad Eerst (OSPF) en zijn allemaal in gebied 0. OSPF is het Interior Gateway Protocol (IGP) dat in het ATM-netwerk wordt gebruikt. Tag-switching wordt gebruikt op de ATM-interfaces op alle vier ATM-apparaten. Tag Distribution Protocol (TDP) wijst tags toe aan de OSPF-routes.

  • PE1 en PE2 zijn Multiprotocol-Border Gateway Protocol (MP-BGP) peers.

  • RIP-routes worden herverdeeld in MP-BGP. MP-BGP-routes worden herverdeeld in RIP op PE1- en PE2-routers.

  • De setup onderhoudt afzonderlijke VRF-routingtabellen in de PE1- en PE2-routers.

  • De naam van VPN die in dit voorbeeld wordt gebruikt is NIEUW.

CE1 
! 
version 12.1 
service timestamps debug datetime msec 
service timestamps log datetime msec 

! 
boot system flashow c4500-js-mz.121-5 
! 

ip subnet-zero 

! 
interface Loopback0 
 ip address 10.1.1.1 255.255.255.0 
! 
interface Loopback1 
 ip address 10.2.2.2 255.255.255.0 
! 
interface Loopback2 
 ip address 10.3.3.3 255.255.255.0 
! 
interface Ethernet0 
 ip address 100.1.1.2 255.255.255.0 
 media-type 10BaseT 

! 

router rip 
 version 2 
 network 10.0.0.0 
 network 100.0.0.0 
 no auto-summary 
! 
ip classless 
!

PE1 
! 
version 12.1 

service timestamps debug uptime 
service timestamps log uptime 

! 
boot system flashow slot1:rsp-jsv-mz.121-5a.bin 
! 

ip subnet-zero 

! 
ip vrf NEW 
 rd 200:1 
 route-target export 200:1 
 route-target import 200:1 
ip cef distributed 

! 
interface Loopback0 
 ip address 1.1.1.1 255.255.255.255 
! 
interface ATM2/0/0 
 mtu 1500 
 no ip address 
! 
interface ATM2/0/0.10 tag-switching 
 ip unnumbered Loopback0 
 tag-switching ip 
! 
interface Ethernet2/1/0 
 ip vrf forwarding NEW 
 ip address 100.1.1.1 255.255.255.0 

! 
router ospf 100 
 no log-adjacency-changes 
 network 1.0.0.0 0.255.255.255 area 0 
 network 100.1.1.0 0.0.0.255 area 0 
! 
router rip 
 version 2 
 network 100.0.0.0 
 no auto-summary 
 ! 
 address-family ipv4 vrf NEW 
 version 2 
 redistribute bgp 200 metric 0 
 network 100.0.0.0 
 no auto-summary 
 exit-address-family 
! 
router bgp 200 
 bgp log-neighbor-changes 
 neighbor 2.2.2.2 remote-as 200 

 neighbor 2.2.2.2 update-source Loopback0 
 no auto-summary 
 ! 
 address-family ipv4 vrf NEW 
 redistribute rip 
 no auto-summary 
 no synchronization 
 exit-address-family 
 ! 
 address-family vpnv4 
 neighbor 2.2.2.2 activate 
 neighbor 2.2.2.2 send-community extended 
 no auto-summary 
 exit-address-family 
! 
ip classless 
!

P1 
!

service timestamps debug uptime 
service timestamps log uptime 
!

ip subnet-zero 
! 

interface Loopback0 
 ip address 4.4.4.4 255.255.255.255 
 no ip directed-broadcast 
! 
interface ATM12/0/0 
 ip unnumbered Loopback0 
 no ip directed-broadcast 

 tag-switching ip 
! 
interface ATM12/0/1 
 ip unnumbered Loopback0 
 no ip directed-broadcast 

 tag-switching ip 

! 
router ospf 100 
 network 4.0.0.0 0.255.255.255 area 0 
! 
ip classless 
!

P2 
! 
service timestamps debug uptime 
service timestamps log uptime 

! 
ip subnet-zero 

! 
interface Loopback0 
 ip address 3.3.3.3 255.255.255.255 
 no ip directed-broadcast 
!  
interface ATM0/1/1 
 ip unnumbered Loopback0 
 no ip directed-broadcast 

 tag-switching ip 
! 
interface ATM0/1/3 
 ip unnumbered Loopback0 
 no ip directed-broadcast 

 tag-switching ip 

! 
router ospf 100 
 network 3.0.0.0 0.255.255.255 area 0 
! 
ip classless 
!

PE2 
! 
version 12.1 
service timestamps debug datetime msec 
service timestamps log datetime msec 

! 
boot system flashow slot0:rsp-jsv-mz.121-5a 
! 

ip subnet-zero 

! 
ip vrf NEW 
 rd 200:1 
 route-target export 200:1 
 route-target import 200:1 
ip cef distributed 

! 
interface Loopback0 
 ip address 2.2.2.2 255.255.255.255 
! 

interface FastEthernet3/0/0 
 ip vrf forwarding NEW 
 ip address 110.1.1.1 255.255.255.0 

 half-duplex 
! 

interface ATM3/1/0.1 tag-switching 
 ip unnumbered Loopback0 
 tag-switching ip 
! 
router ospf 100 
 log-adjacency-changes 
 network 2.0.0.0 0.255.255.255 area 0 

! 
router rip 
 version 2 
 network 110.0.0.0 
 no auto-summary 
 ! 
 address-family ipv4 vrf NEW 
 version 2 
 redistribute bgp 200 metric 0 
 network 110.0.0.0 
 no auto-summary 
 exit-address-family 
! 
router bgp 200 
 bgp log-neighbor-changes 
 neighbor 1.1.1.1 remote-as 200 

 neighbor 1.1.1.1 update-source Loopback0 

 no auto-summary 
 ! 
 address-family ipv4 vrf NEW 
 redistribute rip 
 no auto-summary 
 no synchronization 
 exit-address-family 
 ! 
 address-family vpnv4 
 neighbor 1.1.1.1 activate 
 neighbor 1.1.1.1 send-community extended
 no auto-summary 
 exit-address-family 
! 
ip classless 
!

CE2 
! 
version 12.1 

service timestamps debug uptime 
service timestamps log uptime 

! 

boot system disk0:c7100-jo3s56i-mz.121-5.T.bin 

! 
ip subnet-zero 

! 
interface Loopback0 
 ip address 30.1.1.1 255.255.255.0 
! 
interface Loopback1 
 ip address 30.2.2.2 255.255.255.0 
! 
interface Loopback2 
 ip address 30.3.3.3 255.255.255.0 
! 
interface FastEthernet0/0 
 ip address 110.1.1.2 255.255.255.0 

! 
router rip 
 version 2 
 network 30.0.0.0 
 network 110.0.0.0 
 no auto-summary 
!

Opdrachten weergeven

Gebruik deze opdrachten om te testen of uw netwerk goed werkt:

  • IP-route tonen - Hier worden IP-routeringangen weergegeven.

  • toon ip rip database vrf - toont informatie in de RIP database voor een bepaalde VRF.

  • ip bgp vpnv4 vrf tonen - Geeft VPN-adresinformatie weer uit de BGP-tabel.

  • toon tag-switching interfaces detail - Toont informatie over een of meer interfaces die de MPLS-functie ingeschakeld hebben.

  • toon tag-switching tdp bindingen - Toont de gevraagde ingangen uit de ATM LDP label bindende database.

  • show tag-switching Forwarding-table vrf - Controleert de labelstack die gebruikt wordt voor een bepaalde route.

De hieronder getoonde output is een resultaat van deze ingevoerde opdrachten op de apparaten die in het netwerkdiagram worden weergegeven. Deze output toont aan dat het netwerk goed werkt.

CE1 

Cisco4500#show ip route 
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP 
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 
       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP 
       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area 
       * - candidate default, U - per-user static route, o - ODR 
       P - periodic downloaded static route 

Gateway of last resort is not set 

     100.0.0.0/24 is subnetted, 1 subnets 
C       100.1.1.0 is directly connected, Ethernet0 
     110.0.0.0/24 is subnetted, 1 subnets 
R       110.1.1.0 [120/1] via 100.1.1.1, 00:00:14, Ethernet0 
     10.0.0.0/24 is subnetted, 3 subnets 
C       10.3.3.0 is directly connected, Loopback2 
C       10.2.2.0 is directly connected, Loopback1 
C       10.1.1.0 is directly connected, Loopback0 
     30.0.0.0/24 is subnetted, 3 subnets 
R       30.3.3.0 [120/1] via 100.1.1.1, 00:00:14, Ethernet0 
R       30.2.2.0 [120/1] via 100.1.1.1, 00:00:15, Ethernet0 
R       30.1.1.0 [120/1] via 100.1.1.1, 00:00:15, Ethernet0

PE1 

Cisco7500a#show ip route 
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP 
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 
       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP 
       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area 
       * - candidate default, U - per-user static route, o - ODR 
       P - periodic downloaded static route 

Gateway of last resort is not set 

     1.0.0.0/32 is subnetted, 1 subnets 
C       1.1.1.1 is directly connected, Loopback0 
     2.0.0.0/32 is subnetted, 1 subnets 
O       2.2.2.2 [110/4] via 4.4.4.4, 18:17:37, ATM2/0/0.10 
     3.0.0.0/32 is subnetted, 1 subnets 
O       3.3.3.3 [110/3] via 4.4.4.4, 18:17:37, ATM2/0/0.10 
     4.0.0.0/32 is subnetted, 1 subnets 
O       4.4.4.4 [110/2] via 4.4.4.4, 18:17:37, ATM2/0/0.10 

Cisco7500a#show ip route vrf NEW 
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP 
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 
       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP 
       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area 
       * - candidate default, U - per-user static route, o - ODR 
       P - periodic downloaded static route 

Gateway of last resort is not set 

     100.0.0.0/24 is subnetted, 1 subnets 
C       100.1.1.0 is directly connected, Ethernet2/1/0 
     110.0.0.0/24 is subnetted, 1 subnets 
B       110.1.1.0 [200/0] via 2.2.2.2, 00:26:11 
     10.0.0.0/24 is subnetted, 3 subnets 
R       10.3.3.0 [120/1] via 100.1.1.2, 00:00:11, Ethernet2/1/0 
R       10.2.2.0 [120/1] via 100.1.1.2, 00:00:11, Ethernet2/1/0 
R       10.1.1.0 [120/1] via 100.1.1.2, 00:00:11, Ethernet2/1/0 
     30.0.0.0/24 is subnetted, 3 subnets 
B       30.3.3.0 [200/1] via 2.2.2.2, 00:26:12 
B       30.2.2.0 [200/1] via 2.2.2.2, 00:26:12 
B       30.1.1.0 [200/1] via 2.2.2.2, 00:26:12

Cisco7500a#show ip rip database vrf NEW 
10.0.0.0/8    auto-summary 
10.1.1.0/24 
    [1] via 100.1.1.2, 00:00:18, Ethernet2/1/0 
10.2.2.0/24 
    [1] via 100.1.1.2, 00:00:18, Ethernet2/1/0 
10.3.3.0/24 
    [1] via 100.1.1.2, 00:00:18, Ethernet2/1/0 
30.0.0.0/8    auto-summary 
30.1.1.0/24    redistributed 
    [1] via 2.2.2.2, 
30.2.2.0/24    redistributed 
    [1] via 2.2.2.2, 
30.3.3.0/24    redistributed 
    [1] via 2.2.2.2, 
100.0.0.0/8    auto-summary 
100.1.1.0/24    directly connected, Ethernet2/1/0 
110.0.0.0/8    auto-summary 
110.1.1.0/24    redistributed 
    [1] via 2.2.2.2, 

Cisco7500a#show ip bgp vpnv4 vrf NEW 
BGP table version is 17, local router ID is 1.1.1.1 
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal 
Origin codes: i - IGP, e - EGP, ? - incomplete 

   Network          Next Hop            Metric LocPrf Weight Path 
Route Distinguisher: 200:1 (default for vrf NEW) 
*> 10.1.1.0/24      100.1.1.2                1         32768 ? 
*> 10.2.2.0/24      100.1.1.2                1         32768 ? 
*> 10.3.3.0/24      100.1.1.2                1         32768 ? 
*>i30.1.1.0/24      2.2.2.2                  1    100      0 ? 
*>i30.2.2.0/24      2.2.2.2                  1    100      0 ? 
*>i30.3.3.0/24      2.2.2.2                  1    100      0 ? 
*> 100.1.1.0/24     0.0.0.0                  0         32768 ? 
*>i110.1.1.0/24     2.2.2.2                  0    100      0 ? 

Cisco7500a#show tag-switching interfaces 
Interface              IP    Tunnel   Operational 
ATM2/0/0.10            Yes   No       Yes         (ATM tagging) 

Cisco7500a#show tag-switching interfaces detail 
Interface ATM2/0/0.10: 
        IP tagging enabled 
        TSP Tunnel tagging not enabled 
        Tagging operational 
        Tagswitching turbo vector 
        MTU = 4470 
        ATM tagging: 
                Tag VPI = 1 
                Tag VCI range = 33 - 65535 
                Control VC = 0/32 

Cisco7500a#show tag-switching ? 
  atm-tdp           ATM Tagging Protocol information 
  cos-map           Show Tag CoS ATM Multi-VC CoS Map 
  forwarding-table  Show the Tag Forwarding Information Base (TFIB) 
  interfaces        Show per-interface tag switching 
  prefix-map        Show Tag CoS Prefix Map 
  tdp               Tag Distribution Protocol information 
  
Cisco7500a#show tag-switching tdp bindings 
  tib entry: 1.1.1.1/32, rev 2 
        local binding:  tag: imp-null 
  tib entry: 2.2.2.2/32, rev 23 
        local binding:  tag: 27 
  tib entry: 3.3.3.3/32, rev 21 
        local binding:  tag: 26 
  tib entry: 4.4.4.4/32, rev 10 
        local binding:  tag: 28 

Cisco7500a#show tag-switching atm-tdp bindings 
 Destination: 4.4.4.4/32 
    Headend Router ATM2/0/0.10 (1 hop) 1/33  Active, VCD=24 
 Destination: 3.3.3.3/32 
    Headend Router ATM2/0/0.10 (2 hops) 1/43  Active, VCD=25 
 Destination: 2.2.2.2/32 
    Headend Router ATM2/0/0.10 (3 hops) 1/42  Active, VCD=26 
 Destination: 1.1.1.1/32 
    Tailend Router ATM2/0/0.10 1/33 Active, VCD=24 

Cisco7500a#show tag-switching forwarding-table vrf NEW 
Local  Outgoing    Prefix            Bytes tag  Outgoing   Next Hop 
tag    tag or VC   or Tunnel Id      switched   interface 
29     Aggregate   100.1.1.0/24[V]   2080 
30     Untagged    10.3.3.0/24[V]    0          Et2/1/0    100.1.1.2 
31     Untagged    10.2.2.0/24[V]    0          Et2/1/0    100.1.1.2 
32     Untagged    10.1.1.0/24[V]    0          Et2/1/0    100.1.1.2

P1 

LS1010#show ip route 
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP 
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 
       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP 
       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate default 
       U - per-user static route, o - ODR 
       T - traffic engineered route 

Gateway of last resort is not set 

     1.0.0.0/32 is subnetted, 1 subnets 
O       1.1.1.1 [110/2] via 1.1.1.1, 19:00:12, ATM12/0/0 
     2.0.0.0/32 is subnetted, 1 subnets 
O       2.2.2.2 [110/3] via 3.3.3.3, 19:00:12, ATM12/0/1 
     3.0.0.0/32 is subnetted, 1 subnets 
O       3.3.3.3 [110/2] via 3.3.3.3, 19:00:12, ATM12/0/1 
     4.0.0.0/32 is subnetted, 1 subnets 
C       4.4.4.4 is directly connected, Loopback0 

LS1010#show tag-switching atm-tdp bindings 
 Destination: 4.4.4.4/32 
    Tailend Switch ATM12/0/0 1/33 Active -> Terminating Active 
    Tailend Switch ATM12/0/1 1/34 Active -> Terminating Active 
 Destination: 2.2.2.2/32 
    Transit ATM12/0/0 1/42 Active -> ATM12/0/1 1/35 Active 
 Destination: 1.1.1.1/32 
    Transit ATM12/0/1 1/33 Active -> ATM12/0/0 1/33 Active 
 Destination: 3.3.3.3/32 
    Transit ATM12/0/0 1/43 Active -> ATM12/0/1 1/34 Active

P2 

LS1010#show ip route 
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP 
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 
       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP 
       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate default 
       U - per-user static route, o - ODR 

Gateway of last resort is 10.118.1.21 to network 0.0.0.0 

     1.0.0.0/32 is subnetted, 1 subnets 
O       1.1.1.1 [110/3] via 4.4.4.4, 19:46:00, ATM0/1/1 
     2.0.0.0/32 is subnetted, 1 subnets 
O       2.2.2.2 [110/2] via 2.2.2.2, 19:46:00, ATM0/1/3 
     3.0.0.0/32 is subnetted, 1 subnets 
C       3.3.3.3 is directly connected, Loopback0 
     4.0.0.0/32 is subnetted, 1 subnets 
O       4.4.4.4 [110/2] via 4.4.4.4, 19:46:00, ATM0/1/1 
     10.0.0.0/24 is subnetted, 1 subnets 
C       10.118.1.0 is directly connected, Ethernet2/0/0 
S*   0.0.0.0/0 [1/0] via 10.118.1.21

LS1010#show tag-switching atm-tdp bindings 
 Destination: 1.1.1.1/32 
    Transit ATM0/1/3 1/33 Active -> ATM0/1/1 1/33 Active 
 Destination: 3.3.3.3/32 
    Tailend Switch ATM0/1/3 1/34 Active -> Terminating Active 
    Tailend Switch ATM0/1/1 1/34 Active -> Terminating Active 
 Destination: 4.4.4.4/32 
    Transit ATM0/1/3 1/35 Active -> ATM0/1/1 1/34 Active 
 Destination: 2.2.2.2/32 
    Transit ATM0/1/1 1/35 Active -> ATM0/1/3 1/33 Active

PE2 

Cisco7500#show ip route 
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP 
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 
       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP 
       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area 
       * - candidate default, U - per-user static route, o - ODR 
       P - periodic downloaded static route 

Gateway of last resort is not set 

     1.0.0.0/32 is subnetted, 1 subnets 
O       1.1.1.1 [110/4] via 3.3.3.3, 02:58:46, ATM3/1/0.1 
     2.0.0.0/32 is subnetted, 1 subnets 
C       2.2.2.2 is directly connected, Loopback0 
     3.0.0.0/32 is subnetted, 1 subnets 
O       3.3.3.3 [110/2] via 3.3.3.3, 02:58:46, ATM3/1/0.1 
     4.0.0.0/32 is subnetted, 1 subnets 
O       4.4.4.4 [110/3] via 3.3.3.3, 02:58:46, ATM3/1/0.1 

Cisco7500#show ip route vrf NEW 
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP 
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 
       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP 
       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area 
       * - candidate default, U - per-user static route, o - ODR 
       P - periodic downloaded static route 

Gateway of last resort is not set 

     100.0.0.0/24 is subnetted, 1 subnets 
B       100.1.1.0 [200/0] via 1.1.1.1, 01:16:13 
     110.0.0.0/24 is subnetted, 1 subnets 
C       110.1.1.0 is directly connected, FastEthernet3/0/0 
     10.0.0.0/24 is subnetted, 3 subnets 
B       10.3.3.0 [200/1] via 1.1.1.1, 01:16:13 
B       10.2.2.0 [200/1] via 1.1.1.1, 01:16:13 
B       10.1.1.0 [200/1] via 1.1.1.1, 01:16:13 
     30.0.0.0/24 is subnetted, 3 subnets 
R       30.3.3.0 [120/1] via 110.1.1.2, 00:00:16, FastEthernet3/0/0 
R       30.2.2.0 [120/1] via 110.1.1.2, 00:00:17, FastEthernet3/0/0 
R       30.1.1.0 [120/1] via 110.1.1.2, 00:00:17, FastEthernet3/0/0 

Cisco7500#show ip rip database vrf NEW 
10.0.0.0/8    auto-summary 
10.1.1.0/24    redistributed 
    [1] via 1.1.1.1, 
10.2.2.0/24    redistributed 
    [1] via 1.1.1.1, 
10.3.3.0/24    redistributed 
    [1] via 1.1.1.1, 
30.0.0.0/8    auto-summary 
30.1.1.0/24 
    [1] via 110.1.1.2, 00:00:09, FastEthernet3/0/0 
30.2.2.0/24 
    [1] via 110.1.1.2, 00:00:09, FastEthernet3/0/0 
30.3.3.0/24 
    [1] via 110.1.1.2, 00:00:09, FastEthernet3/0/0 
100.0.0.0/8    auto-summary 
100.1.1.0/24    redistributed 
    [1] via 1.1.1.1, 
110.0.0.0/8    auto-summary 
110.1.1.0/24    directly connected, FastEthernet3/0/0 
Cisco7500#show ip bgp vpnv4 vrf NEW 
BGP table version is 17, local router ID is 2.2.2.2 
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal 
Origin codes: i - IGP, e - EGP, ? - incomplete 

   Network          Next Hop            Metric LocPrf Weight Path 
Route Distinguisher: 200:1 (default for vrf NEW) 
*>i10.1.1.0/24      1.1.1.1                  1    100      0 ? 
*>i10.2.2.0/24      1.1.1.1                  1    100      0 ? 
*>i10.3.3.0/24      1.1.1.1                  1    100      0 ? 
*> 30.1.1.0/24      110.1.1.2                1         32768 ? 
*> 30.2.2.0/24      110.1.1.2                1         32768 ? 
*> 30.3.3.0/24      110.1.1.2                1         32768 ? 
*>i100.1.1.0/24     1.1.1.1                  0    100      0 ? 
*> 110.1.1.0/24     0.0.0.0                  0         32768 ? 

Cisco7500#show tag-switching interfaces 
Interface              IP    Tunnel   Operational 
ATM3/1/0.1             Yes   No       Yes         (ATM tagging) 

Cisco7500#show tag-switching interfaces detail 
Interface ATM3/1/0.1: 
        IP tagging enabled 
        TSP Tunnel tagging not enabled 
        Tagging operational 
        Tagswitching turbo vector 
        MTU = 4470 
        ATM tagging: 
                Tag VPI = 1 
                Tag VCI range = 33 - 65535 
                Control VC = 0/32 

Cisco7500#show tag-switching ? 
  atm-tdp           ATM Tagging Protocol information 
  cos-map           Show Tag CoS ATM Multi-VC CoS Map 
  forwarding-table  Show the Tag Forwarding Information Base (TFIB) 
  interfaces        Show per-interface tag switching 
  prefix-map        Show Tag CoS Prefix Map 
  tdp               Tag Distribution Protocol information

Cisco7500#show tag-switching tdp bindings 
  tib entry: 1.1.1.1/32, rev 25 
        local binding:  tag: 26 
  tib entry: 2.2.2.2/32, rev 2 
        local binding:  tag: imp-null 
  tib entry: 3.3.3.3/32, rev 27 
        local binding:  tag: 27 
  tib entry: 4.4.4.4/32, rev 29 
        local binding:  tag: 28 

Cisco7500#show tag-switching atm-tdp bindings 
 Destination: 1.1.1.1/32 
    Headend Router ATM3/1/0.1 (3 hops) 1/33  Active, VCD=8 
 Destination: 3.3.3.3/32 
    Headend Router ATM3/1/0.1 (1 hop) 1/34  Active, VCD=6 
 Destination: 4.4.4.4/32 
    Headend Router ATM3/1/0.1 (2 hops) 1/35  Active, VCD=7 
 Destination: 2.2.2.2/32 
    Tailend Router ATM3/1/0.1 1/33 Active, VCD=8 

Cisco7500#show tag-switching forwarding-table vrf NEW 
Local  Outgoing    Prefix            Bytes tag  Outgoing   Next Hop 
tag    tag or VC   or Tunnel Id      switched   interface 
33     Aggregate   110.1.1.0/24[V]   0 
34     Untagged    30.3.3.0/24[V]    0          Fa3/0/0    110.1.1.2 
35     Untagged    30.2.2.0/24[V]    0          Fa3/0/0    110.1.1.2 
36     Untagged    30.1.1.0/24[V]    0          Fa3/0/0    110.1.1.2

CE2 

Cisco7100#show ip route 
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP 
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 
       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP 
       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area 
       * - candidate default, U - per-user static route, o - ODR 
       P - periodic downloaded static route 

Gateway of last resort is not set 

     100.0.0.0/24 is subnetted, 1 subnets 
R       100.1.1.0 [120/1] via 110.1.1.1, 00:00:19, FastEthernet0/0 
     110.0.0.0/24 is subnetted, 1 subnets 
C       110.1.1.0 is directly connected, FastEthernet0/0 
     10.0.0.0/24 is subnetted, 3 subnets 
R       10.3.3.0 [120/1] via 110.1.1.1, 00:00:19, FastEthernet0/0 
R       10.2.2.0 [120/1] via 110.1.1.1, 00:00:19, FastEthernet0/0 
R       10.1.1.0 [120/1] via 110.1.1.1, 00:00:19, FastEthernet0/0 
     30.0.0.0/24 is subnetted, 3 subnets 
C       30.3.3.0 is directly connected, Loopback2 
C       30.2.2.0 is directly connected, Loopback1 
C       30.1.1.0 is directly connected, Loopback0

Gerelateerde informatie

Revisiegeschiedenis

Revisie Publicatiedatum Opmerkingen
1.0
29-Nov-2001
Eerste vrijgave

Was dit document nuttig?

FeedbackFeedback

Contact Cisco

Dit document is van toepassing op deze producten