Dit document biedt informatie over de ondersteuning van Layer 2 multicast-functies in verschillende Cisco Catalyst Series-Switches.
Deze tabellen geven meer informatie:
Raadpleeg de ondersteuningspagina van IP Multicast voor aanvullende informatie over de implementatie van de multicast-functie en voor voorbeeldconfiguraties en tips voor probleemoplossing.
Er zijn geen specifieke vereisten van toepassing op dit document.
Dit document is niet beperkt tot specifieke software- en hardware-versies.
Raadpleeg Cisco Technical Tips Conventions (Conventies voor technische tips van Cisco) voor meer informatie over documentconventies.
Deze tabel bevat informatie met betrekking tot ondersteuning voor Cisco Group Management Protocol (CGMP) en Internet Group Management Protocol (IGMP)-snuffelfuncties in Cisco Catalyst-Switches.
Catalyst-platform | CGMP (minimale softwareversie) | Standaard | IGMP-spionage (minimale softwareversie) | Standaard | IGMP V3 (minimale softwareversie) |
---|---|---|---|---|---|
Catalyst 6000 - Catalyst OS (CatOS)-software | Niet ondersteund(1) | N.v.t. | Ja (alle versies) | Ingeschakeld (sinds 5.5.9 en 6.3.1) | Ja (7,5) (2) |
Catalyst 6000- Cisco IOS®-software | Niet ondersteund(1) | N.v.t. | Ja (alle versies) | Ingeschakeld | Ja (Cisco IOS Software Release 12.1(8a)E) |
Catalyst 5000 | Ja (2.2) | Uitgeschakeld | Ja (4.1)(3) | Uitgeschakeld | Niet ondersteund |
Katalysator 4000 - CatOS (Supervisor Engine 1/2) / (2948G/4912G/2980G) | Ja (2.2) | Uitgeschakeld | Niet ondersteund | N.v.t. | Niet ondersteund |
Catalyst 4000 - Cisco IOS (Supervisor Engine 2+/3/4/5) | Niet ondersteund(1) | N.v.t. | Ja (alle versies) | Ingeschakeld | Ja (Cisco IOS Software Release 12.1(19)EW) |
Catalyst 3550 | Niet ondersteund(1) | N.v.t. | Ja (alle versies) | Ingeschakeld | Ja (Cisco IOS Software Release 12.1(19)EA1) |
Catalyst 3560 | Niet ondersteund | N.v.t. | Ja (Cisco IOS Software Release 12.1(19)EA1) | Ingeschakeld | Ja (Cisco IOS Software Release 12.1(19)EA1) |
Catalyst 3750 | Niet ondersteund(1) | N.v.t. | Ja (alle versies) | Ingeschakeld | Ja (Cisco IOS Software Release 12.1(19)EA1) |
Catalyst 2940 | Niet ondersteund(1) | N.v.t. | Ja (alle versies) | Ingeschakeld | Ja (Cisco IOS Software Release 12.1(19)EA1) |
Katalysator 2950; Katalysator 2955 | Niet ondersteund | N.v.t. | Ja (alle versies) | Ingeschakeld | Ja (Cisco IOS Software Release 12.1(19)EA1) |
Catalyst 2960 | Niet ondersteund | N.v.t. | Ja (alle versies) | Ingeschakeld | Ja (alle versies) |
Catalyst 2970 | Niet ondersteund | N.v.t. | Ja (alle versies) | Ingeschakeld | Ja (Cisco IOS Software Release 12.1(19)EA1) |
Katalysator 2900XL; Katalysator 3500XL | Ja (alle versies) | Ingeschakeld | Niet ondersteund | N.v.t. | Niet ondersteund |
Katalysator 2948G-L3 / Katalysator 4908G-L3 | Ja (ondersteunt CMF in alle versies)(4) | N.v.t. | Niet ondersteund | N.v.t. | Niet ondersteund |
Katalysator 1900 / Katalysator 2820 | Ja (5.33) | Uitgeschakeld | Niet ondersteund | N.v.t. | Niet ondersteund |
Catalyst 8500 | Ja (ondersteunt CMF in alle versies)(4) | Uitgeschakeld | Niet ondersteund | N.v.t. | Niet ondersteund |
(1) De CGMP-serverfunctie wordt ondersteund in Multilayer Switch Feature Card (MSFC), MSFC2, Catalyst 4000 Supervisor Engine III/IV en Catalyst 3550 en 3750 switches. De functie CGMP Layer 2 wordt niet ondersteund.
(2) Op Catalyst 6500s, vóór softwarerelease 6.3(10), werd een IGMP versie 3 (V3) pakket met meer dan één groep in hetzelfde pakket weggegooid. Dit wordt rechtgezet in softwarerelease 6.3(10). Software releases 6.3(x) draaien IGMP versie 2 (V2), en er is geen ondersteuning voor V3. Een IGMP V3-rapport wordt behandeld als een set IGMP V2-rapporten voor elk van de multicast-groepen die de groepsrecords vormen in IGMP V3. Dit gebeurt ongeacht de filtermodus van het IGMP V3-rapport. Raadpleeg Cisco bug ID CSCdw61628 (alleen geregistreerde klanten) voor meer informatie. IGMP V3 wordt ondersteund vanaf versie 7.5 (alleen in Catalyst 6500-systemen met Supervisor Engine II) en Cisco IOS Software Release 12.1(11b)E1 of hoger is vereist op de MSFC2.
(3) Voor Catalyst 5000s is Supervisor Engine II G of III G, of Supervisor Engine III met een NetFlow Feature Card (NFFC) of NFFC II vereist voor IGMP-snoopondersteuning. Supervisor Engine-softwarerelease 4.1 of hoger is vereist. Bepaalde hardware vereist een latere versie van de software. (De NFFC II vereist bijvoorbeeld softwarerelease 4.3 of hoger.)
(4) Constrained Multicast Flooding (CMF) is een Cisco IOS Software-methode voor het uitvoeren van IGMP-snooping. Het is gemaakt voor Cisco IOS Layer 3-switches.
In deze tabel vindt u de ondersteuning voor de CGMP-functies en de opdrachten voor het inschakelen van de functie.
Catalyst-platform | CGMP | CGMP-verlof | snel verlof |
---|---|---|---|
Catalyst 5000 | CGMP {Inschakelen | Uitschakelen} instellen | CGMP Leave {Inschakelen | Uitschakelen} instellen | Niet ondersteund |
Katalysator 4000 - CatOS (Supervisor Engine 1/2) / (2948G/4912G/2980G) | CGMP {Inschakelen | Uitschakelen} instellen | CGMP Leave {Inschakelen | Uitschakelen} instellen | CGMP FastLeave instellen {Inschakelen | Uitschakelen} |
Katalysator 2900XL; Katalysator 3500XL | [No] CGMP | [No] CGMP Leave Processing | Niet ondersteund |
Katalysator 2948G-L3 / Katalysator 4908G-L3 | [No] Bridge CMF | Niet ondersteund | Niet ondersteund |
Katalysator 1900 / Katalysator 2820 | [No] CGMP | [No] CGMP Leave Processing | Niet ondersteund |
Catalyst 8500 | [No] Bridge CMF | Niet ondersteund | Niet ondersteund |
Deze tabel bevat ondersteuning voor IGMP-snooping, IGMP-querier, IGMP-filtering, IGMP-throttling en IGMP Multicast VLAN Registration en de opdrachten die nodig zijn om de functie in te schakelen.
Catalyst-platform | IGMP-snooping | IGMP Fastleave | IGMP-filtering (minimale softwareversie) | IGMP Querier (minimale softwareversie) | IGMP-throttling (minimale softwareversie) | Multicast VLAN-registratie (minimale softwareversie) |
---|---|---|---|---|---|---|
Catalyst 6000 - CatOS-software | IGMP {Inschakelen | Uitschakelen} instellen | IGMP FastLeave instellen {Inschakelen | Uitschakelen} | Niet ondersteund | IGMP-querier instellen {Uitschakelen | Inschakelen} VLAN_ID 7.1 | Niet ondersteund | Niet ondersteund |
Catalyst 6000- Cisco IOS-software | [No] IP IGMP-snooping | [No] IP IGMP snooping fastleave | Niet ondersteund | [no] ip igmp snooping querier (onder VLAN-interface) (Cisco IOS Software Release 12.1(8a)E) | Niet ondersteund | Niet ondersteund |
Catalyst 5000 | IGMP {Inschakelen | Uitschakelen} instellen | IGMP FastLeave instellen {Inschakelen | Uitschakelen} | Niet ondersteund | Niet ondersteund | Niet ondersteund | Niet ondersteund |
Catalyst 4000 - Cisco IOS-software (Supervisor Engine 2+/3/4) | [No] IP IGMP-snooping | [Nee] IP IGMP-snooping VLAN_ID onmiddellijk verlaten | Ja (Cisco IOS Software Release 12.1(11b)EW) | Momenteel niet ondersteund | Niet ondersteund | Niet ondersteund |
Catalyst 3550 | [No] IP IGMP-snooping | [Nee] IP IGMP-snooping VLAN_ID onmiddellijk verlaten | Ja (Cisco IOS Software Release 12.1(8)EA1) | Momenteel niet ondersteund | Ja (Cisco IOS Software Release 12.1(19)EA1 | Ja (Cisco IOS Software Release 12.1(8)EA1 |
Catalyst 3560 | [No] IP IGMP-snooping | [Nee] IP IGMP-snooping VLAN_ID onmiddellijk verlaten | Ja (Cisco IOS Software Release 12.1(19)EA1) | Ja (Cisco IOS Software Release 12.2(25)SEA) | Ja (Cisco IOS Software Release 12.1(19)EA1) | Ja (Cisco IOS Software Release 12.1(19)EA1) |
Catalyst 3750 | [No] IP IGMP-snooping | [Nee] IP IGMP-snooping VLAN_ID onmiddellijk verlaten | Ja (Cisco IOS Software Release 12.1(11)AX) | Ja (Cisco IOS Software Release 12.2(25)SEA | Ja (Cisco IOS Software Release 12.1(19)EA1 | Ja (Cisco IOS Software Release 12.1(11)AX |
Catalyst 2940 | [No] IP IGMP-snooping | [Nee] IP IGMP-snooping VLAN_ID onmiddellijk verlaten | Ja (Cisco IOS Software Release 12.1(11)AX) | Momenteel niet ondersteund | Ja (Cisco IOS Software Release 12.1(19)EA1 | Ja (Cisco IOS Software Release 12.1(13)AY |
Katalysator 2950; Katalysator 2955 | [No] IP IGMP-snooping | [Nee] IP IGMP-snooping VLAN_ID onmiddellijk verlaten | Ja (Cisco IOS Software Release 12.1(9)EA1) | 2950: Niet ondersteund 2955: Ja (Cisco IOS Software Release 12.1(22)EA4 | Ja (Cisco IOS Software Release 12.1(19)EA1 | 2950: Ja (Cisco IOS Software Release 12.1(6)EA2c 2955: Ja (Cisco IOS Software Release 12.1(12c)EA1 |
Catalyst 2960 | [No] IP IGMP-snooping | [Nee] IP IGMP-snooping VLAN_ID onmiddellijk verlaten | Ja (Cisco IOS Software Release 12.2(25)FX | Ja (Cisco IOS Software Release 12.2(25)FX | Ja (Cisco IOS Software Release 12.2(25)FX | Ja (Cisco IOS Software Release 12.2(25)FX |
Catalyst 2970 | [No] IP IGMP-snooping | [Nee] IP IGMP-snooping VLAN_ID onmiddellijk verlaten | Ja (Cisco IOS Software Release 12.1(11)AX) | Ja (Cisco IOS Software Release 12.2(25)SEA | Ja (Cisco IOS Software Release 12.1(19)EA1 | Ja (Cisco IOS Software Release 12.1(11)AX |
Aanvullende opmerkingen
IGMPv3 join and leave-berichten worden niet ondersteund op switches waarop IGMP-filtering of Multicast VLAN-registratie wordt uitgevoerd.
Switches ondersteunen IGMPv3-snooping alleen op basis van het MAC-adres van de bestemmingsmulticast en ondersteunen geen snooping op basis van het MAC-adres van de bron of op basis van de proxyrapporten.
Deze tabel bevat ondersteuning voor ondersteuning voor Generic Attribute Registration Protocol (GARP) Multicast Registration Protocol (GMRP) en Router-Port Group Management Protocol (RGMP) op Catalyst-Switches.
Catalyst-platform | GMRP (minimale softwareversie) | RGMP (minimale softwareversie) |
---|---|---|
Catalyst 6000 - CatOS-software | Ja (5.2) | Ja (5.4) |
Catalyst 6000 - Cisco IOS-software | Niet ondersteund | Ja (Cisco IOS Software Release 12.1e) |
Catalyst 5000 | Ja (1) (5.1) | Ja (5.4) |
Katalysator 4000 - CatOS (Supervisor Engine 1/2) / (2948G/4912G/2980G) | Ja (5.1) | Niet ondersteund |
Catalyst 4000 - Cisco IOS-software (Supervisor Engine 2+/3/4) | Niet ondersteund | Niet ondersteund |
Catalyst 3550 | Niet ondersteund | Niet ondersteund |
Catalyst 3750 | Niet ondersteund | Niet ondersteund |
Catalyst 2940 | Niet ondersteund | Niet ondersteund |
Katalysator 2950; Katalysator 2955 | Niet ondersteund | Niet ondersteund |
Catalyst 2970 | Niet ondersteund | Niet ondersteund |
Katalysator 2900XL; Katalysator 3500XL | Niet ondersteund | Niet ondersteund |
Katalysator 2948G-L3 / Katalysator 4908G-L3 | Niet ondersteund | Niet ondersteund |
Katalysator 1900 / Katalysator 2820 | Niet ondersteund | Niet ondersteund |
Catalyst 8500 | Niet ondersteund | Niet ondersteund |
(1) Catalyst 5000 vereist Supervisor Engine II, IIG, III of IIIG voor GMRP-ondersteuning.
Aanvullende opmerkingen
U kunt GMRP niet inschakelen als IGMP-snooping is ingeschakeld.
RGMP vereist dat IGMP-snooping is ingeschakeld op de switch.
Zowel GMRP als RGMP zijn standaard uitgeschakeld op alle ondersteunde switches.
Revisie | Publicatiedatum | Opmerkingen |
---|---|---|
1.0 |
14-Dec-2002
|
Eerste vrijgave |