アカウントをお持ちの場合
  •   パーソナライズされたコンテンツ
  •   製品とサポート
ログイン

アカウントをお持ちでない場合

アカウントを作成

Cisco IP Phone 7800 シリーズ、8800 シリーズ Multiplatform Phone プロビジョニング ガイド

マニュアルのコンテンツ
このマニュアル内で検索
ご利用いただける言語
Download Options

Book Title

Cisco IP Phone 7800 シリーズ、8800 シリーズ Multiplatform Phone プロビジョニング ガイド

Chapter Title

サンプル設定ファイル

検索結果

Updated:
2017年6月29日

章のタイトル： サンプル設定ファイル

サンプル設定ファイル

XML オープン形式のサンプル

<?xml version="1.0" encoding="UTF-8"?>
<device xsi:type="axl:XIPPhone" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
 
<flat-profile>
 
 
 
<!-- System Configuration -->
 
<Restricted_Access_Domains ua="na"/>
<Enable_Web_Server ua="na">Yes</Enable_Web_Server>
<Web_Server_Port ua="na">80</Web_Server_Port>
<Enable_Web_Admin_Access ua="na">Yes</Enable_Web_Admin_Access>
<Admin_Password ua="na"/>
<User_Password ua="rw"/>
<Phone-UI-user-mode ua="na">No</Phone-UI-user-mode>
 
 
<!-- Internet Connection Type -->
 
<Connection_Type ua="rw">DHCP</Connection_Type>
 
 
<!-- Static IP Settings -->
 
<Static_IP ua="rw"/>
<NetMask ua="rw"/>
<Gateway ua="rw"/>
 
<!-- Optional Network Configuration -->
 
<HostName ua="rw"/>
<Domain ua="rw"/>
<Primary_DNS ua="rw"/>
<Secondary_DNS ua="rw"/>
<Syslog_Server ua="na"/>
<Debug_Level ua="na"/>0</Debug_Level>
<Layer_2_Logging ua="na">No</Layer_2_Logging>
<Primary_NTP_Server ua="na">us.pool.ntp.org</Primary_NTP_Server>
<Secondary_NTP_Server ua="na"/>
<SSH_Access ua="na">No</SSH_Access>
<DNS_Cache_TTL_Ignore ua="na">Yes</DNS_Cache_TTL_Ignore>
<SSH_User_ID ua="na"/>
<SSH_Password ua="na"/>
 
 
<!-- VLAN Settings -->
<Enable_CDP ua="na">Yes</Enable_CDP>
<Enable_LLDP-MED ua="na">Yes</Enable_LLDP-MED>
<Network_Startup_Delay ua="na">3</Network_Startup_Delay>
<VLAN_ID ua="rw">4095</VLAN_ID>
 
 
<!-- Inventory Settings -->
 
<Asset_ID ua="na"/>
 
 
<!-- SIP Parameters -->
 
<Max_Forward ua="na">70</Max_Forward>
<Max_Redirection ua="na">5</Max_Redirection>
<SIP_User_Agent_Name ua="na">$VERSION</SIP_User_Agent_Name>
<SIP_Server_Name ua="na">$VERSION</SIP_Server_Name>
<SIP_Reg_User_Agent_Name ua="na" />
<SIP_Accept_Language ua="na" />
<RFC_2543_Call_Hold ua="na">No</RFC_2543_Call_Hold>
<SIP_TCP_Port_Min ua="na">5060</SIP_TCP_Port_Min>
<SIP_TCP_Port_Max ua="na">5080</SIP_TCP_Port_Max>
<Caller_ID_Header ua="na">PAID-RPID-FROM</Caller_ID_Header>
<Max_INVITE_Retry_Attempts ua="na">3</Max_INVITE_Retry_Attempts>
<Max_NON-INVITE_Retry_Attempts ua="na">3</Max_NON-INVITE_Retry_Attempts>
 
<!-- SIP Timer Values -->
 
<SIP_T1 ua="na">0.5</SIP_T1>
<SIP_T2 ua="na">4</SIP_T2>
<INVITE_Expires ua="na">240</INVITE_Expires>
<ReINVITE_Expires ua="na">30</ReINVITE_Expires>
<Reg_Retry_Intvl ua="na">30</Reg_Retry_Intvl>
<Reg_Retry_Long_Intvl ua="na">1200</Reg_Retry_Long_Intvl>
<Reg_Retry_Random_Delay ua="na">0</Reg_Retry_Random_Delay>
<Reg_Retry_Long_Random_Delay ua="na">0</Reg_Retry_Long_Random_Delay>
<Reg_Retry_Intvl_Cap ua="na">0</Reg_Retry_Intvl_Cap>
 
 
<!-- Response Status Code Handling -->
 
<Try_Backup_RSC ua="na">5??, 6??</Try_Backup_RSC>
<Retry_Reg_RSC ua="na">5??, 6??</Retry_Reg_RSC>
 
 
<!-- RTP Parameters -->
 
<RTP_Port_Min ua="na">16384</RTP_Port_Min>
<RTP_Port_Max ua="na">16538</RTP_Port_Max>
<RTP_Packet_Size ua="na">0.02</RTP_Packet_Size>
<RTCP_Tx_Enable ua="na">No</RTCP_Tx_Enable>
 
 
<!-- SDP Payload Types -->
<AVT_Dynamic_Payload ua="na">101</AVT_Dynamic_Payload>
 
 
<!-- NAT Support Parameters -->
 
<NAT_Keep_Alive_Intvl ua="na">15</NAT_Keep_Alive_Intvl>
 
 
<!-- Configuration Profile -->
<!-- EM BASED RULES -->
<Profile_Rule ua="na">("$EMS" eq "mobile")? [--uid $MUID$PDOM --pwd $MPWD] http://192.0.2.1:80/dms/CP-8851-3PCC//8851System.xml | http://192.0.2.1:80/dms/CP-8851-3PCC//8851System.xml</Profile_Rule>
<Profile_Rule_B ua="na" />
<Profile_Rule_C ua="na" />
 
<!--
Profile_Rule Syntax:
Condition:
If Extension Mobility is enabled/activated, use the "Moble UserID/Password" to
authenticate/load the URL defined:
("$EMS" eq "mobile")? [--uid $MUID$PDOM --pwd $MPWD]
http://192.0.2.1:80/dms/CP-8851-3PCC//8851System.xml |
http://192.0.2.1:80/dms/CP-8851-3PCC//8851System.xml
Else:
If Extension Mobility is not enabled/activated, Default to the following URL.
http://192.0.2.1:80/dms/CP-8851-3PCC//8851System.xml
-->
 
 
<Provision_Enable ua="na">Yes</Provision_Enable>
<Resync_On_Reset ua="na">Yes</Resync_On_Reset>
<Resync_Random_Delay ua="na">2</Resync_Random_Delay>
<Resync_At__HHmm_ ua="na">0100</Resync_At__HHmm_>
<Resync_At_Random_Delay ua="na">600</Resync_At_Random_Delay>
<Resync_Periodic ua="na">3600</Resync_Periodic>
<Resync_Error_Retry_Delay ua="na">3600</Resync_Error_Retry_Delay>
<Forced_Resync_Delay ua="na">14400</Forced_Resync_Delay>
<Resync_Fails_On_FNF ua="na">Yes</Resync_Fails_On_FNF>
<Profile_Rule ua="na">http://10.74.10.225/yxue2/ut/7841System_wSBC.xml</Profile_Rule>
<Profile_Rule_B ua="na" />
<Profile_Rule_C ua="na">/ut/Register2.xml</Profile_Rule_C>
<Profile_Rule_D ua="na" />
<Resync_DHCP_Option_To_Use ua="na">160,159,66,150</Resync_DHCP_Option_To_Use>
<Log_Request_Msg ua="na">$PN $MAC -- Requesting %s $SCHEME://$SERVIP:$PORT$PATH</Log_Request_Msg>
<Log_Success_Msg ua="na">$PN $MAC -- Successful %s $SCHEME://$SERVIP:$PORT$PATH -- $ERR</Log_Success_Msg>
<Log_Failure_Msg ua="na">$PN $MAC -- %s failed: $ERR</Log_Failure_Msg>
<User_Configurable_Resync ua="na">Yes</User_Configurable_Resync>
<!-- Firmware Upgrade -->
 
<Upgrade_Enable ua="na">Yes</Upgrade_Enable>
<Upgrade_Error_Retry_Delay ua="na">3600</Upgrade_Error_Retry_Delay>
<Upgrade_Rule ua="na" />
 
<!-- Extension Mobility -->
<EM_Enable ua=”na”>Yes</EM_Enable>
<EM_User_Domain ua="na">@192.0.2.1</EM_User_Domain>
 
<!-- CA Settings -->
 
<Custom_CA_Rule ua="na" />
 
 
<!-- General Purpose Parameters -->
<GPP_A ua="na" />
<GPP_B ua="na" />
<GPP_C ua="na" />
<GPP_D ua="na" />
<GPP_E ua="na" />
<GPP_F ua="na" />
<GPP_G ua="na" />
<GPP_H ua="na" />
<GPP_I ua="na" />
<GPP_J ua="na" />
<GPP_K ua="na" />
<GPP_L ua="na" />
<GPP_M ua="na" />
<GPP_N ua="na" />
<GPP_O ua="na" />
<GPP_P ua="na" />
 
 
<!-- Control Timer Values (sec) -->
 
<Interdigit_Long_Timer ua="na">10</Interdigit_Long_Timer>
<Interdigit_Short_Timer ua="na">3</Interdigit_Short_Timer>
 
 
<!-- Time -->
 
<Time_Zone ua="na">GMT-8:00</Time_Zone>
<Time_Offset__HH_mm_ ua="na">00/00</Time_Offset__HH_mm_>
<Ignore_DHCP_Time_Offset ua="na">No</Ignore_DHCP_Time_Offset>
<Daylight_Saving_Time_Rule ua="na">start=3/-1/7/2;end=10/-1/7/2;save=1</Daylight_Saving_Time_Rule>
<Daylight_Saving_Time_Enable ua="na">Yes</Daylight_Saving_Time_Enable>
 
<!-- Localization -->
 
<Dictionary_Server_Script ua="na" />
<Language_Selection ua="na" />
<Locale ua="na">en-US</Locale>
 
- <!-- QoS Settings -->
 
<SIP_TOS_Value ua="na">0x60</SIP_TOS_Value>
<RTP_TOS_Value ua="na">0xb8</RTP_TOS_Value>
 
 
<!-- General -->
 
<Station_Display_Name ua="na" />
<Text_Logo ua="na" />
<PNG_Picture_Download_URL ua="na" />
<Select_Logo ua="na">Default</Select_Logo>
<Select_Background_Picture ua="na">None</Select_Background_Picture>
<Screen_Saver_Enable ua="rw">No</Screen_Saver_Enable>
<Screen_Saver_Wait ua="rw">300</Screen_Saver_Wait>
<Screen_Saver_Icon ua="rw">Background Picture</Screen_Saver_Icon>
<Co-branding_Banner_Picture_Download_URL ua="na" />
 
 
<!-- Miscellaneous Line Key Settings -->
 
<Call_Appearances_Per_Line ua="na">2</Call_Appearances_Per_Line>
 
 
<!-- Supplementary Services -->
 
<Conference_Serv ua="na">Yes</Conference_Serv>
<Attn_Transfer_Serv ua="na">Yes</Attn_Transfer_Serv>
<Blind_Transfer_Serv ua="na">Yes</Blind_Transfer_Serv>
<Cfwd_All_Serv ua="na">Yes</Cfwd_All_Serv>
<Cfwd_Busy_Serv ua="na">Yes</Cfwd_Busy_Serv>
<Cfwd_No_Ans_Serv ua="na">Yes</Cfwd_No_Ans_Serv>
 
 
<!-- BroadSoft Settings -->
 
<Directory_Enable ua="na">Yes</Directory_Enable>
<XSI_Host_Server ua="na">xsi.iop1.broadworks.net</XSI_Host_Server>
<Directory_Name ua="na">IOP1</Directory_Name>
<Directory_Type ua="na">Enterprise</Directory_Type>
<Directory_User_ID ua="na">broadsoft_user</Directory_User_ID>
<Directory_Password ua="na" />
 
 
<!-- LDAP Corporate Directory Search -->
 
<LDAP_Dir_Enable ua="na">No</LDAP_Dir_Enable>
<LDAP_Corp_Dir_Name ua="na" />
<LDAP_Server ua="na" />
<LDAP_Auth_Method ua="na">None</LDAP_Auth_Method>
<LDAP_Client_DN ua="na" />
<LDAP_Username ua="na" />
<LDAP_Password ua="na" />
<LDAP_Search_Base ua="na" />
<LDAP_Last_Name_Filter ua="na" />
<LDAP_First_Name_Filter ua="na" />
<LDAP_Search_Item_3 ua="na" />
<LDAP_Item_3_Filter ua="na" />
<LDAP_Search_Item_4 ua="na" />
<LDAP_Item_4_Filter ua="na" />
<LDAP_Display_Attrs ua="na" />
<LDAP_Number_Mapping ua="na" />
 
 
<!-- XML Service -->
 
<XML_Directory_Service_Name ua="na" />
<XML_Directory_Service_URL ua="na" />
<XML_Application_Service_Name ua="na" />
<XML_Application_Service_URL ua="na" />
<XML_User_Name ua="na" />
<XML_Password ua="na" />
 
 
<!-- Call Forward -->
 
<Cfwd_All_Dest ua="rw" />
<Cfwd_Busy_Dest ua="rw" />
<Cfwd_No_Ans_Dest ua="rw" />
<Cfwd_No_Ans_Delay ua="rw">20</Cfwd_No_Ans_Delay>
 
 
<!-- Speed Dial -->
 
<Speed_Dial_2 ua="na" />
<Speed_Dial_3 ua="na" />
<Speed_Dial_4 ua="na" />
<Speed_Dial_5 ua="na" />
<Speed_Dial_6 ua="na" />
<Speed_Dial_7 ua="na" />
<Speed_Dial_8 ua="na" />
<Speed_Dial_9 ua="na" />
 
 
<!-- Supplementary Services -->
 
<Time_Format ua="rw">12hr</Time_Format>
<Date_Format ua="rw">month/day</Date_Format>
 
 
<!-- Audio -->
 
<Ringer_Volume ua="rw">8</Ringer_Volume>
<Speaker_Volume ua="rw">8</Speaker_Volume>
 
 
<!-- LCD -->
 
<LCD_Contrast ua="rw">16</LCD_Contrast>
<Back_Light_Timer ua="na">10s</Back_Light_Timer>
<!-- General -->
 
<Line_Enable_1_ ua="na">Yes</Line_Enable_1_>
 
 
<!-- NAT Settings -->
 
<NAT_Keep_Alive_Enable_1_ ua="na">No</NAT_Keep_Alive_Enable_1_>
<NAT_Keep_Alive_Msg_1_ ua="na">$NOTIFY</NAT_Keep_Alive_Msg_1_>
 
 
<!-- SIP Settings -->
 
<SIP_Transport_1_ ua="na">UDP</SIP_Transport_1_>
<SIP_Port_1_ ua="na">5060</SIP_Port_1_>
<SIP_100REL_Enable_1_ ua="na">Yes</SIP_100REL_Enable_1_>
<Auth_Resync-Reboot_1_ ua="na">Yes</Auth_Resync-Reboot_1_>
<SIP_Remote-Party-ID_1_ ua="na">Yes</SIP_Remote-Party-ID_1_>
<Refer-To_Target_Contact_1_ ua="na">No</Refer-To_Target_Contact_1_>
<SIP_Debug_Option_1_ ua="na">None</SIP_Debug_Option_1_>
<Sticky_183_1_ ua="na">No</Sticky_183_1_>
<Auth_INVITE_1_ ua="na">No</Auth_INVITE_1_>
<User_Equal_Phone_1_ ua="na">No</User_Equal_Phone_1_>
 
 
<!-- Call Feature Settings -->
 
<Default_Ring_1_ ua="rw">1</Default_Ring_1_>
<Conference_Bridge_URL_1_ ua="na" />
 
 
<!-- Proxy and Registration -->
<Proxy_1_ ua="na" />
<Outbound_Proxy_1_ ua="na">199.19.193.9</Outbound_Proxy_1_>
<Alternate_Proxy_1_ ua="na" />
<Alternate_Outbound_Proxy_1_ ua="na" />
<Register_1_ ua="na">Yes</Register_1_>
<Make_Call_Without_Reg_1_ ua="na">No</Make_Call_Without_Reg_1_>
<Register_Expires_1_ ua="na">3600</Register_Expires_1_>
<Use_DNS_SRV_1_ ua="na">Yes</Use_DNS_SRV_1_>
<Proxy_Fallback_Intvl_1_ ua="na">3600</Proxy_Fallback_Intvl_1_>
<Dual_Registration_1_ ua="na">No</Dual_Registration_1_>
 
 
<!-- Subscriber Information -->
 
<Display_Name_1_ ua="na" />
<User_ID_1_ ua="na" />
<Password_1_ ua="na" />
<Auth_ID_1_ ua="na" />
<Reversed_Auth_Realm_1_ ua="na" />
 
 
<!-- Audio Configuration -->
 
<Preferred_Codec_1_ ua="na">G722</Preferred_Codec_1_>
<Use_Pref_Codec_Only_1_ ua="na">No</Use_Pref_Codec_Only_1_>
<Second_Preferred_Codec_1_ ua="na">Unspecified</Second_Preferred_Codec_1_>
<Third_Preferred_Codec_1_ ua="na">Unspecified</Third_Preferred_Codec_1_>
<G711u_Enable_1_ ua="na">Yes</G711u_Enable_1_>
<G711a_Enable_1_ ua="na">Yes</G711a_Enable_1_>
<G729a_Enable_1_ ua="na">Yes</G729a_Enable_1_>
<G729ab_Enable_1_ ua="na">Yes</G729ab_Enable_1_>
<G722_Enable_1_ ua="na">Yes</G722_Enable_1_>
<iLBC_Enable_1_ ua="na">Yes</iLBC_Enable_1_>
<Silence_Supp_Enable_1_ ua="na">No</Silence_Supp_Enable_1_>
<DTMF_Tx_Method_1_ ua="na">Auto</DTMF_Tx_Method_1_>
 
 
<!-- Dial Plan -->
<Dial_Plan_1_ ua="na">( <8:>x.| [*#]xx[*x] | [*#]xx.| [2-9]11S0 | 00 | 011x.| [0-1][2-9]xxxxxxxxx | 0 | [2-9]xxxxxxxxx | xxxx)</Dial_Plan_1_>
</flat-profile>
</device>
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

このドキュメントは役に立ちましたか?

Feedbackフィードバック

お問い合わせ先

関連するサポート コミュニティのディスカッション

シスコについて
シスコへのお問い合わせ
採用情報