この製品のマニュアルセットは、偏向のない言語を使用するように配慮されています。このマニュアルセットでの偏向のない言語とは、年齢、障害、性別、人種的アイデンティティ、民族的アイデンティティ、性的指向、社会経済的地位、およびインターセクショナリティに基づく差別を意味しない言語として定義されています。製品ソフトウェアのユーザーインターフェイスにハードコードされている言語、RFP のドキュメントに基づいて使用されている言語、または参照されているサードパーティ製品で使用されている言語によりドキュメントに例外が存在する場合があります。シスコのインクルーシブランゲージに対する取り組みの詳細は、こちらをご覧ください。
このドキュメントは、米国シスコ発行ドキュメントの参考和訳です。リンク情報につきましては、日本語版掲載時点で、英語版にアップデートがあり、リンク先のページが移動/変更されている場合がありますことをご了承ください。あくまでも参考和訳となりますので、正式な内容については米国サイトのドキュメントを参照ください。
目次
この章の内容は、次のとおりです。
Cisco Nexus 1000V は、送信元および宛先 MAC アドレスに基づいたループ検出メカニズムを実装しており、送信元 MAC がすでにローカル vEthernet インターフェイスに存在する場合は、アップリンク ポートに着信したパケットをドロップします。 その結果、仮想ルータ冗長プロトコル(VRRP)、共通アドレス冗長プロトコル(CARP)、ホット スタンバイ ルータ プロトコル(HSRP)、および他の同様のプロトコルなどのプロトコルは、Cisco Nexus 1000V に関連付けられた仮想マシンで失敗します。
ループ検出をディセーブルにすると、Cisco Nexus 1000V に関連付けられた仮想マシンでこれらのプロトコルをサポートするための柔軟な方法が提供されます。 ループ検出メカニズムをディセーブルにすると、ポート プロファイルまたは vEthernet インターフェイスで前述のプロトコルの組み合わせを任意に設定できます。 その結果、同じ仮想マシン上で複数のプロトコルを使用できます。
冗長ルーティング プロトコル機能のサポートには、次の注意事項および制限事項があります。
冗長ルーティング プロトコルをサポートするように vEthernet インターフェイスを設定するには、次の手順を使用します。
次に、vEthernet インターフェイスを設定して仮想マシンで VRRP、CERP、HSRP、ユーザ定義の各プロトコルをサポートする例を示します。
switch# configure terminal switch(config)# int veth5 switch(config-if)# disable-loop-detection carp switch(config-if)# disable-loop-detection vrrp switch(config-if)# disable-loop-detection hsrp switch(config-if)# disable-loop-detection custom-rp dest-ip 224.0.0.12 port 2234 switch(config-if)# end switch# show running-config interface vethernet 5 !Command: show running-config interface Vethernet5 !Time: Fri Nov 4 02:21:24 2011 version 4.2(1)SV1(5.1) interface Vethernet5 inherit port-profile vm59 description Fedora117, Network Adapter 2 disable-loop-detection carp disable-loop-detection custom-rp dest-ip 224.0.0.12 port 2234 disable-loop-detection hsrp disable-loop-detection vrrp vmware dvport 32 dvswitch uuid "ea 5c 3b 50 cd 00 9f 55-41 a3 2d 61 84 9e 0e c4" vmware vm mac 0050.56B3.00B2 switch#
冗長ルーティング プロトコルをサポートするようにポート プロファイルを設定するには、次の手順を使用します。 マスター/スレーブ関係のマスターで接続が失われ、スレーブがマスターの役割を引き継いだ状態で、元のマスターがマスターの役割を取り戻すことを試行している場合は、次の手順を実行します。
(注) |
同じ仮想マシン上で複数のプロトコルを実行するために、vEthernet インターフェイスおよびポート プロファイルを設定した場合は、ポート プロファイルの設定よりも vEthernet インターフェイスの設定が優先されます。 |
次に、ホット スタンバイ ルータ プロトコルのループ検出をディセーブルにする例を示します。
switch# configure terminal switch(config)# port-profile hsrp-1 switch(config-port-prof)# switchport mode trunk switch(config-port-prof)# no shutdown switch(config-port-prof)# disable-loop-detection hsrp switch(config-port-prof)# state enabled switch(config-port-prof)# vmware port-group switch(config-port-prof)# show port-profile name hsrp-1 port-profile hsrp-1 type: Vethernet description: status: enabled max-ports: 32 min-ports: 1 inherit: config attributes: switchport mode trunk disable-loop-detection hsrp no shutdown evaluated config attributes: switchport mode trunk disable-loop-detection hsrp no shutdown assigned interfaces: port-group: hsrp-1 system vlans: none capability l3control: no capability iscsi-multipath: no capability vxlan: no capability l3-vservice: no port-profile role: none port-binding: static
次に、仮想ルータ冗長プロトコルのループ検出をディセーブルにする例を示します。
n1000v# configure terminal switch(config)# port-profile vrrp-1 switch(config-port-prof)# switchport mode trunk switch(config-port-prof)# no shutdown switch(config-port-prof)# disable-loop-detection vrrp switch(config-port-prof)# state enabled switch(config-port-prof)# vmware port-group switch(config-port-prof)# show port-profile name vrrp-1 port-profile vrrp-1 type: Vethernet description: status: enabled max-ports: 32 min-ports: 1 inherit: config attributes: switchport mode trunk disable-loop-detection vrrp no shutdown evaluated config attributes: switchport mode trunk disable-loop-detection vrrp no shutdown assigned interfaces: port-group: vrrp-1 system vlans: none capability l3control: no capability iscsi-multipath: no capability vxlan: no capability l3-vservice: no port-profile role: none port-binding: static
機能名 |
機能名 |
リリース |
---|---|---|
冗長ルーティング プロトコルのサポート |
4.2(1)SV1(5.1) |
この機能が導入されました。 |