|
|
|
getVirtualSensorStatistics : Analysis Engine is busy
|
仮想センサーが初期化を終了していないため、分析エンジンがビジー状態です。 |
show statistics virtual-sensor |
getVirtualSensorStatistics : Analysis Engine is busy rebuilding regex tables.This may take a while.
|
センサーのイメージが作成された直後で、分析エンジンはキャッシュ ファイルを構築中のため、ビジー状態です。 |
show statistics virtual-sensor |
editConfigDeltaSignatureDefinition : Analysis Engine is busy rebuilding regex tables.This may take a while.
|
センサーのイメージが作成された直後で、分析エンジンはキャッシュ ファイルを構築中のため、ビジー状態です。 |
service signature-definition |
Invalid command received.
|
.conf ファイルおよびコードが同期していません。このフィールドでは通常、発生しない状態です。 |
すべてのコマンド |
Invalid port number was entered.
|
URI に範囲外のポート番号が入力されました。 |
copy 、 upgrade、 show tech-support |
Invalid scheme was entered.
|
内部テーブルが同期していません。このフィールドでは通常、発生しない状態です。 |
copy 、 upgrade、 show tech-support |
Unknown scheme was entered.
|
URI に無効なスキームが入力されました。 |
copy 、 upgrade、 show tech-support |
The filename <file> is not a valid upgrade file type.
|
プラットフォームおよびバージョンに対して誤ったファイルのインストールが試みられました。 |
upgrade |
idsPackageMgr: digital signature of the update was not valid
|
シグニチャ アップデートまたはサービス パックが破損しています。TAC に連絡します。 |
upgrade |
Cannot create a new event-action-rules configuration.“rules0“ is currently the only configuration allowed.
|
サービス イベント アクション規則に対して無効な論理インスタンス名が入力されました。 |
service event-action-rules |
Cannot create a new signature-definition configuration.“sig0“ is currently the only configuration allowed.
|
サービス シグニチャ定義に対して無効な論理インスタンス名が入力されました。 |
service signature-definition |
Cannot create a new anomaly-detection configuration.“ad0“ is currently the only configuration allowed.
|
サービス異常検出に対して無効な論理インスタンス名が入力されました。 |
service anomaly-detection |
|
管理者が、システムに存在しないユーザ名のパスワードの変更を試みています。 |
password |
Incorrect password for user account.
|
ユーザが、パスワードを変更しようとして無効なパスワードを入力しました。 |
password |
|
curUserAccountList.xml ファイルにエントリがありません。このフィールドでは通常、発生しない状態です。 |
username |
|
ユーザの作成が試みられましたが、そのユーザはすでにシステムに存在します。 |
username |
Cannot communicate with system processes.Please contact your system administrator.
|
1 つまたは複数の必須アプリケーションが制御トランザクションに応答していません。 |
すべてのコマンド |
Source and Destination are the same.
|
-- |
copy |
Backup config was missing.
|
ユーザが、バックアップ コンフィギュレーション ファイルのコピーまたは消去を試みましたが、バックアップ コンフィギュレーション ファイルは生成されていません。 |
copy erase |
Could not load CLI configuration files, can not complete request.
|
.conf ファイルが見つかりません。このフィールドでは通常、発生しない状態です。 |
copy |
|
コピー先に指定された URL に書き込みできませんでした。 |
copy |
Error reading from <URL>.
|
コピー元に指定された URL を読み取りできませんでした。 |
copy |
Packet-file does not exist.
|
ユーザがパケットファイルのコピーまたは消去を試みましたが、パケットファイルはキャプチャされていません。 |
copy erase |
|
ユーザが、アップグレードされていないシステムのダウングレードを試みました。 |
downgrade |
No packet-file available.
|
ユーザが、ファイル情報またはパケットファイルの表示を試みましたが、パケットファイルが存在しません。 |
packet |
Log file exists but an error occurred during read.
|
ユーザが表示またはコピーしていた iplog ファイルが上書きされました。ファイルの内容は、一部表示可能です。 |
packet |
Another user is currently capturing into the packet-file.Please try again later.
|
-- |
packet capture |
Another CLI client is currently displaying packets from the interface.
|
この操作を行うには、他の CLI セッションが表示を終了するまで待機する必要があります。複数のユーザがコマンド コントロール インターフェイスを同時に表示する可能性があります。 |
packet display |
|
ユーザが、存在しない iplog のコピーまたは表示を試みました。 |
copy iplog packet display iplog |
The requested IPLOG is not complete.Please try again after the IPLOG status is 'completed.'
|
ユーザが、完成していない iplog のコピーまたは表示を試みました。 |
copy iplog |
Could not create pipe /usr/cids/idsRoot/tmp/ pipe_cliPacket.<pid>.tmp
|
iplog ファイルを送信するためのパイプを開くことができませんでした。この状態は、スペースまたはリソース上の制限があることを示しています。このフィールドでは通常、発生しない状態です。 |
copy iplog |
The log file was overwritten while the copy was in progress.The copied log file may be viewable but is incomplete.
|
iplog がセンサーからのコピー中に上書きされました。 |
copy iplog |
Could not read license file.
|
ライセンス ファイルがコピーされましたが、開くことができません。 |
copy license-key |
Could not write the temporary license file location used to copy the file off the box.
|
一時保存場所の /usr/cids/idsRoot/tmp/ips.lic を開くことができませんでした。この状態は、スペース上の制限があることを示しています。このフィールドでは通常、発生しない状態です。 |
copy license-key |
Virtual sensor name does not exist.
|
ユーザが、存在しない仮想センサー上の iplog の開始または停止を試みました。 |
iplog |
You do not have permission to terminate the requested CLI session.
|
オペレータ ユーザまたはビューア ユーザが、別のユーザに属する CLI セッションの終了を試みました。 |
clear line |
Invalid CLI ID specified, use the 'show users all' command to view the valid CLI session IDs.
|
ユーザが、存在しない CLI セッションのキャンセルを試みました。 |
clear line |
The maximum allowed CLI sessions are currently open, please try again later.
|
すでに最大数の CLI セッションが開かれているときに、オペレータ ユーザまたはビューア ユーザがログインを試みました。 |
initial login |
The maximum allowed CLI sessions are currently open, would you like to terminate one of the open sessions?
|
すでに最大数の CLI セッションが開かれているときに、管理者ユーザがログインを試みました。 |
initial login |
Can not communicate with system processes.Please contact your system administrator.
|
CLI からセンサー上のアプリケーションにアクセスして起動情報を取得できませんでした。これは通常、発生しない致命的なエラーです。ユーザはサービス アカウントにログインして、手動でセンサーをリブートする必要があります。 |
initial login |
The instance cannot be removed.Instance assigned to virtual sensor name.
|
ユーザが、仮想センサーに現在割り当てられている設定インスタンスの削除を試みました。設定をデフォルトにリセットするには、 default service コマンドを使用します。 |
no service component instance |
Insufficient disk space to complete request.
|
コンフィギュレーション ファイルの新しいインスタンスを作成するには、ディスクの空き容量が足りません。 |
copy instance service component instance |