Verifica di SPAN e ERSPAN sui dispositivi Catalyst serie 9000 Switch

Opzioni per il download

PDF (320.1 KB)
Visualizza con Adobe Reader su diversi dispositivi
ePub (115.9 KB)
Visualizza in diverse app su iPhone, iPad, Android, Sony Reader o Windows Phone
Mobi (Kindle) (124.5 KB)
Visualizza su dispositivo Kindle o tramite app Kindle su più dispositivi

Aggiornato:29 aprile 2025

ID documento:218111

Linguaggio senza pregiudizi

La documentazione per questo prodotto è stata redatta cercando di utilizzare un linguaggio senza pregiudizi. Ai fini di questa documentazione, per linguaggio senza di pregiudizi si intende un linguaggio che non implica discriminazioni basate su età, disabilità, genere, identità razziale, identità etnica, orientamento sessuale, status socioeconomico e intersezionalità. Le eventuali eccezioni possono dipendere dal linguaggio codificato nelle interfacce utente del software del prodotto, dal linguaggio utilizzato nella documentazione RFP o dal linguaggio utilizzato in prodotti di terze parti a cui si fa riferimento. Scopri di più sul modo in cui Cisco utilizza il linguaggio inclusivo.

Informazioni su questa traduzione

Cisco ha tradotto questo documento utilizzando una combinazione di tecnologie automatiche e umane per offrire ai nostri utenti in tutto il mondo contenuti di supporto nella propria lingua. Si noti che anche la migliore traduzione automatica non sarà mai accurata come quella fornita da un traduttore professionista. Cisco Systems, Inc. non si assume alcuna responsabilità per l’accuratezza di queste traduzioni e consiglia di consultare sempre il documento originale in inglese (disponibile al link fornito).

Introduzione

In questo documento viene descritto come verificare le funzioni SPAN ed ERSPAN sui dispositivi Catalyst serie 9000 Switch.

Prerequisiti

Requisiti

Nessun requisito specifico previsto per questo documento.

Componenti usati

Le informazioni fornite in questo documento si basano sulle seguenti versioni software e hardware:

Catalyst 9300 (Cisco IOS® XE 17.3.5)
Catalyst 9500 (Cisco IOS® XE 17.3.5)

Le informazioni discusse in questo documento fanno riferimento a dispositivi usati in uno specifico ambiente di emulazione. Su tutti i dispositivi menzionati nel documento la configurazione è stata ripristinata ai valori predefiniti. Se la rete è operativa, valutare attentamente eventuali conseguenze derivanti dall'uso dei comandi.

Prodotti correlati

Il presente documento può essere utilizzato anche per le seguenti versioni hardware e software:

Catalyst 9200
Catalyst 9300
Catalyst 9400
Catalyst 9500
Catalyst 9600

Verifica SPAN

Esempio di rete

SPAN Topology

Configurazione SPAN

monitor session 1 source interface Twe1/0/1
monitor session 1 destination interface Twe1/0/2

Verificare la configurazione del software SPAN. Prendere nota delle interfacce SPAN di origine e destinazione e della direzione dell'acquisizione SPAN.

C9500-SPAN#show monitor session all
Session 1
---------
Type                     : Local Session
Source Ports             :
    Both                 : Twe1/0/1
Destination Ports        : Twe1/0/2
    Encapsulation        : Native
          Ingress        : Disabled

Verificare la voce hardware SPAN. Utilizzare l'ID sessione FED univoco per ciascuna configurazione SPAN. Possono essere configurate contemporaneamente fino a 8 sessioni FED (da 0 a 7).

C9500-SPAN# show platform software monitor session 1
Span Session 1 (FED Session 0):
  Type:      Local SPAN
  Prev type: Local SPAN
  Ingress Src Ports: Twe1/0/1    <-- Hardware entry for source interface.
  Egress Src Ports:  Twe1/0/1    <-- Hardware entry for source interface.
  Ingress Local Src Ports: (null)
  Egress Local Src Ports: (null)
  Destination Ports:  Twe1/0/2   <-- Hardware entry for destination interface.
  Ingress Src Vlans:
  Egress Src Vlans:
  Ingress Up Src Vlans: (null)
  Egress Up Src Vlans:  (null)
  Src Trunk filter Vlans:
  RSPAN dst vlan: 0
  RSPAN src vlan: 0
  RSPAN src vlan sav: 0
  Dest port encap = 0x0000
  Dest port ingress encap = 0xFFFFFFFFFFFFFFFF
  Dest port ingress vlan = 0x0
  SrcSess: 1  DstSess: 0 DstPortCfgd: 1  RspnDstCfg: 0  RspnSrcVld: 0
  DstCliCfg: 0  DstPrtInit: 1  PsLclCfgd: 0
  Flags: 0x00000031 PSPAN
  Remote dest port: 0   Dest port group: 0
  FSPAN disabled
  FSPAN not notified

Raccogliere i numeri ASIC, Core e Port per le porte SPAN di origine e di destinazione configurate. Il numero di porta è necessario per verificare che l'interfaccia SPAN di origine sia programmata correttamente e che lo SPAN punti all'interfaccia SPAN di destinazione corretta.

Suggerimento: Utilizzare la nomenclatura corretta dispositivo standalone show platform software/hardware feed active o stack dispositivo show platform software/hardware feed switch <number>.

C9500-SPAN# show platform software fed active ifm mappings 
Interface                 IF_ID    Inst Asic Core Port SubPort Mac  Cntx LPN  GPN  Type Active
TwentyFiveGigE1/0/1       0x8        1   0   1    20     0      16   4    1    101  NIF  Y
TwentyFiveGigE1/0/2       0x9        1   0   1    21     0      17   5    2    102  NIF  Y

Il registro Doppler IlePortLeSpanBitMapTable viene utilizzato per definire se una porta è soggetta a SPAN in direzione in entrata (RX). Per verificare che la porta SPAN di origine configurata (porta ASIC 20) sia assegnata alla sessione FED corretta (sessione 0):

C9500-SPAN# show platform hardware fed active fwd-asic register read register-name IlePortLeSpanBitMapTable-20 asic 0 core 1
For asic 0 core 1

Module 0 - IlePortLeSpanBitMapTable[0][20] 

ssbm                      : 0x1     <-- Convert from Hexadecimal to Binary: 0b00000001. Bit 0 is set.

La mappa di bit della sessione SPAN è un registro a 8 bit. Ogni bit corrisponde a una sessione FED: Il bit meno significativo corrisponde alla sessione FED 0, il bit più significativo corrisponde alla sessione FED 7. Di conseguenza, il numero massimo di sessioni SPAN supportate è 8, come indicato in precedenza.

Se un'interfaccia è configurata come porta di origine SPAN per più sessioni SPAN, tutte le sessioni FED devono essere visualizzate nel registro SSBM. Ad esempio, SSBM con valore 0x5 (0b00000101) indica che l'interfaccia è un'origine SPAN sia per la sessione FED 0 che per la sessione FED 2.

Analogamente, il registro Doppler ElePortLeSpanBitMapTable determina se una porta è soggetta a SPAN in direzione uscita (TX). L'analisi è uguale al registro IlePortLeSpanBitMapTable. Per confermare che la porta SPAN di origine configurata (porta ASIC 20) è stata assegnata alla sessione FED corretta (sessione 0):

C9500-SPAN# show platform hardware fed active fwd-asic register read register-name ElePortLeSpanBitMapTable-20 asic 0 core 1
For asic 0 core 1

Module 0 - ElePortLeSpanBitMapTable[0][20] 

ssbm                      : 0x1

Ciò conferma che l'interfaccia SPAN di origine è mappata alla sessione FED destra per entrambe le direzioni RX e TX.

Con l'ID sessione FED, è possibile trovare le porte di destinazione per l'SPAN all'interno del registro Doppler AqmRepSpanPortMap. Per confermare che la sessione FED 0 punta alla porta di destinazione SPAN destra (porta ASIC 21):

C9500-SPAN# show platform hardware fed active fwd-asic register read register-name AqmRepSpanPortMap-0 asic 0 core 1
For asic 0 core 1

Module 0 - AqmRepSpanPortMap[0][0] 

cpuQueueNum               : 0x0
cpuSpanValid              : 0x0
indirectApPortMap         : 0x0
portMap0                  : 0x200000     <-- Convert from Hexadecimal to Binary: 0b00100000000000000000000. Bit 21 is set.
rcpPortMap                : 0x0
spanCtiLo                 : 0x0

Ciò conferma che i pacchetti acquisiti con SPAN devono essere mostrati come replicati fuori dall'interfaccia Tw1/0/2 (porta ASIC 21). Se sono configurate più porte di destinazione SPAN, vengono visualizzate nel registro AqmRepSpanPortMap.

Verifica di ERSPAN

Esempio di rete

ERSPAN Topology

Nota: Catalyst C9200 non supporta ERSPAN.

Nota: È necessaria una licenza Cisco DNA.

Configurazione ERSPAN

### Source ESRPAN Device ###

C9300-ERSPAN# show run | section monitor
monitor session 1 type erspan-source
 source vlan 10 
 destination
  erspan-id 3                     <-- ERSPAN id must be identical on source and destination.
  ip address 192.168.1.1          <-- GRE tunnel destination IP (IP addr configured on ERSPAN destination switch).
  origin ip address 192.168.1.2   <-- GRE tunnel source IP (IP addr configured on ERSPAN source switch).
  
C9300-ERSPAN# show ip interface brief | exclude unassigned
Interface              IP-Address      OK? Method Status                Protocol    
<snip>
Loopback0              192.168.1.2     YES NVRAM  up                    up      

### Destination ERSPAN Device ###

C9500-ERSPAN# show run | section monitor
monitor session 1 type erspan-destination
destination interface Twe1/0/3
source
erspan-id 3                       <-- ERSPAN id must be identical on source and destination.  
ip address 192.168.1.1            <-- GRE tunnel destination IP (IP addr configured on ERSPAN destination switch).

C9500-ERSPAN# show ip interface brief | exclude unassigned
Interface            IP-Address       OK? Method Status                Protocol
<snip> 
Loopback0            192.168.1.1     YES NVRAM   up                   up

Dispositivo di origine

Verificare la raggiungibilità tra l'indirizzo IP di origine e quello di destinazione.

C9300-ERSPAN#ping 192.168.1.1 source 192.168.1.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.1.1, timeout is 2 seconds:
Packet sent with a source address of 192.168.1.2 
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/2 ms

Programmazione software Cisco IOS

Verificare nel software Cisco IOS la voce relativa alla sessione ERSPAN.

C9300-ERSPAN#show monitor session 1
Session 1
---------
Type                     : ERSPAN Source Session
Status                   : Admin Enabled
Source VLANs             :
    Both                 : 10
Destination IP Address   : 192.168.1.1
Destination ERSPAN ID    : 3
Origin IP Address        : 192.168.1.2

Programmazione SHIM

Verificare i dati inviati dal software all'hardware del programma (oggetto SHIM).

C9300-ERSPAN#show platform software monitor session 1
Span Session 1 (FED Session 0):
  Type:      ERSPAN Source
  Prev type: Unknown
  Ingress Src Ports:
  Egress Src Ports: 
  Ingress Local Src Ports: (null)
  Egress Local Src Ports: (null)
  Destination Ports: 
  Ingress Src Vlans: 10     <-- Replicate Traffic.
  Egress Src Vlans:  10     <-- Replicate Traffic.
  Ingress Up Src Vlans: 10
  Egress Up Src Vlans:  10
  Src Trunk filter Vlans:
  RSPAN dst vlan: 0
  RSPAN src vlan: 0
  RSPAN src vlan sav: 0
  Dest port encap = 0x0000
  Dest port ingress encap = 0x0000
  Dest port ingress vlan = 0x0
  SrcSess: 1  DstPortCfgd: 0  RspnDstCfg: 0  RspnSrcVld: 0    <-- Monitor session number.
  DstCliCfg: 0  DstPrtInit: 0  PsLclCfgd: 0
  Flags: 0x00000002 VSPAN
  Remote dest port: 0   Dest port group: 0
  FSPAN disabled
  FSPAN not notified
  ERSPAN Id    : 3     	      <-- Value match with the software setting.				
  ERSPAN Org Ip: 192.168.1.2  <-- Value match with the software setting.			
  ERSPAN Dst Ip: 192.168.1.1  <-- Value match with the software setting.
  ERSPAN Ip Ttl: 255
  ERSPAN State : Enabled        		
  ERSPAN Tun id: 77

Processore route di gestione inoltro

Verificare il software inviato all'hardware del programma (FMAN RP Layer).

C9300-ERSPAN#show platform software swspan switch active R0 source 
Showing SPAN source table summary info

Sess-id   IF-type   IF-id   Sess-type   Dir         
--------------------------------------------------
0         VLAN      10      ERSPAN SRC  Ingress     
0         VLAN      10      ERSPAN SRC  Egress    


C9300-ERSPAN#show platform software swspan switch active R0 source sess-id 0
Showing SPAN source detail info
Session ID : 0
Intf Type : VLAN
Vlan id : 10       <-- Vlan entry
PD Sess ID : 0
Session Type : ERSPAN SRC
Direction : Ingress
Filter Enabled : No
ACL Configured : No
ERSPAN Enable : Yes

Session ID : 0
Intf Type : VLAN
Vlan id : 10    <-- Match with the Vlan/Interface SPAN.
PD Sess ID : 0
Session Type : ERSPAN SRC
Direction : Egress
Filter Enabled : No
ACL Configured : No
ERSPAN Enable : Yes

Forward Manager-Forwarding Processor

Verificare il software inviato all'hardware del programma (FMAN FP Layer).

C9300-ERSPAN#show platform software swspan switch active F0 source 
Showing SPAN source table summary info

Sess-id   IF-type   IF-id   Sess-type   Dir         
--------------------------------------------------
0         VLAN      10      ERSPAN SRC  Ingress     
0         VLAN      10      ERSPAN SRC  Egress

C9300-ERSPAN#show platform software swspan switch active F0 source sess-id 0
Showing SPAN source detail info

Session ID : 0
Intf Type : VLAN
Vlan id : 10
PD Sess ID : 0
Session Type : ERSPAN SRC   <-- Source Interface.
Direction : Ingress
Filter Enabled : No
ACL Configured : No
AOM Object id : 519
AOM Object Status : Done
Parent AOM object Id : 30
Parent AOM object Status : Done

Session ID : 0
Intf Type : VLAN
Vlan id : 10
PD Sess ID : 0
Session Type : ERSPAN SRC  <-- Source Interface.
Direction : Egress
Filter Enabled : No
ACL Configured : No
AOM Object id : 520
AOM Object Status : Done
Parent AOM object Id : 30
Parent AOM object Status : Done


C9300-ERSPAN#show platform software swspan switch active F0 counters  <-- Check for any err counters that increment on PI/PD/HW
Dump Switch SPAN FP operation counters  <-- Operational Counters.

Source SPAN Config Counters

PI: Create 2 (err 0), Modify 0 (err 0), Delete 0 (err 0) <-- PI = platform independent (Software/IOS).
PD: Create 2 (err 0), Modify 0 (err 0), Delete 0 (err 0) <-- PD = platform dependent (SHIM/FMAN/FED).
HW: Create 2 (err 0), Modify 0 (err 0), Delete 0 (err 0) <-- HW = hardware (FED/ASIC).

Destination SPAN Config Counters

PI: Create 1 (err 0), Modify 0 (err 0), Delete 0 (err 0)
PD: Create 1 (err 0), Modify 0 (err 0), Delete 0 (err 0)
HW: Create 1 (err 0), Modify 0 (err 0), Delete 0 (err 0)

Filter SPAN Config Counters

PI: Create 0 (err 0), Modify 0 (err 0), Delete 0 (err 0)
PD: Create 0 (err 0), Modify 0 (err 0), Delete 0 (err 0)
HW: Create 0 (err 0), Modify 0 (err 0), Delete 0 (err 0)

Driver motore di inoltro

Verificare il livello che programma l'ASIC (FED).

C9300-ERSPAN#show platform software fed switch active monitor 0
Session 0
---------
  Session Type         : ERSPAN Source Session
  Source Ports         : RX: None  TX: None  
  Destination Ports    : None
  Source VLANs         : VLAN-10
  Destination VLANs    : VLAN-10 
  Source RSPAN VLAN    : 0
  DST RSPAN VLAN       : 0
  Encap                : Native
  Ingress Forwarding   : Disabled
  Filter VLANs         : None
  ERSPAN Enable        : 1         <-- 1 = On/Completed.
  ERSPAN Hw Programmed : 1         <-- 1 = On/Completed.
  ERSPAN Mandatory Cfg : 1         <-- 1 = On/Completed.
  ERSPAN Id            : 3
  Gre Prot             : 88be
  MTU                  : 9000
  Ip Tos               : 0
  Ip Ttl               : 255
  Cos                  : 0
  Vrf Id               : 0
  Dst Ip               : 192.168.1.1
  Org Ip               : 192.168.1.2
  Dst Ipv6             : ::
  Org Ipv6             : ::
  SGT count            : 0
  SGT Tag(s)           :

Verificare la programmazione tunnel hardware (FED).

C9300-ERSPAN#show platform software fed switch active ifm interfaces tunnel 
Interface                         IF_ID               State             
----------------------------------------------------------------------
Tunnel1000000000                  0x00000035          READY            <-- 0x35 in Hex is 53 in Decimal (tunnel number 53).

C9300-ERSPAN#show platform software fed switch active ifm if-id 0x35 <-- Hardware tunnel number 0x35.
Interface IF_ID : 0x0000000000000035
Interface Name : Tunnel1000000000
Interface Block Pointer : 0x55d0ff5b6c98
Interface Block State : READY
Interface State : Enabled
Interface Status : ADD
Interface Ref-Cnt : 4
Interface Type : TUNNEL
    Unit : 0
    SNMP IF Index : 0
    Encap L3If LE Handle : 0x7f00e0a50a28    <-- Hardware handle info (used to check final Hardware program state).
    Decap L3If LE Handle : 0x7f00e0a50bd8    <-- Hardware handle info (used to check final Hardware program state).
    Tunnel Mode : 0 [gre]                    <-- Tunnel Protocol Enable.
    Tunnel Sub-mode: 0 [none]
    Hw Support : Yes
    Tunnel Vrf : 0
    IPv4 MTU : 0
    IPv6 MTU : 0
    IPv4 VRF ID : 0
    IPv6 VRF ID : 0
    Protocol flags : 0x0001 [ ipv4 ]
    Misc flags : 0x0000 [ None ]
    ICMPv4 flags : 0x03 [ unreachable redirect ]
    ICMPv6 flags : 0x03 [ unreachable redirect ]

Port Information
    Handle ............ [0xcf000051]
    Type .............. [L3-Tunnel]
    Identifier ........ [0x35]
    Unit .............. [53]
    Port Logical Tunnel Subblock
    Encap-L3ifle.......[0x7f00e0a50a28]   <-- Same number as previous highlighted output.
    Decap-L3ifle.......[0x7f00e0a50bd8]   <-- Same number as previous highlighted output.
    decap-portle.......[0x0]
    RI-decap...........[0x7f00e0a5a1a8]
    SI-decap...........[0x7f00e0a5a678]
    Decap-Tcam_handle..[0x7f00e0a5a9a8]
    Tunnel_capability..[0x3]
    Encap-RCP-PMAP.....[0x0]
    GPN................[0]

C9300-ERSPAN#show platform software fed switch active ifm mappings l3if-le | include L3IF|Tunnel
L3IF_LE                   Interface                         IF_ID               Type                  
0x00007f00e0a50a28        Tunnel1000000000                  0x00000035          ENCAP_L3_LE <-- L3IF + IF_ID (ENCAP) match here.               
0x00007f00e0a50bd8        Tunnel1000000000                  0x00000035          DECAP_L3_LE <-- L3IF + IF_ID (DECAP) match here.

Encapsulation LE

C9300-ERSPAN#show platform hardwware fed switch active fwd-asic abstraction print-resource-handle 0x00007f00e0a50a28 0 <-- ENCAP. 
Handle:0x7f00e0a50a28 Res-Type:ASIC_RSC_L3IF_LE Res-Switch-Num:255 Asic-Num:255 Feature-ID:AL_FID_IFM Lkp-ftr-id:LKP_FEAT_INVALID ref_count:1
priv_ri/priv_si Handle: (nil)Hardware Indices/Handles: index0:0x27 mtu_index/l3u_ri_index0:0x5 sm handle [ASIC 0]: 0x7f00e0a56d08 index1:0x27 mtu_index/l3u_ri_index1:0x5

==============================================================

Decapsulation LE

C9300-ERSPAN#show platform hardware fed switch active fwd-asic abstraction print-resource-handle 0x00007f00e0a50a28 0 <-- DECAP.
Handle:0x7f00e0a50bd8 Res-Type:ASIC_RSC_L3IF_LE Res-Switch-Num:255 Asic-Num:255 Feature-ID:AL_FID_IFM Lkp-ftr-id:LKP_FEAT_INVALID ref_count:1
priv_ri/priv_si Handle: (nil)Hardware Indices/Handles: index0:0x28 mtu_index/l3u_ri_index0:0x0 sm handle [ASIC 0]: 0x7f00e0a559c8 index1:0x28 mtu_index/l3u_ri_index1:0x0

==============================================================

Eseguire Embedded Packet Capture sulla porta di uscita verso lo switch di destinazione. È possibile applicare un filtro. Usare l'IP di origine e di destinazione del tunnel GRE. (Il pacchetto è un pacchetto incapsulato).

Frame 1: 110 bytes on wire (880 bits), 110 bytes captured (880 bits) on interface 0
 <snip>
Internet Protocol Version 4, Src: 192.168.1.2, Dst: 192.168.1.1 <-- ERSPAN IP HEADER.
    0100 .... = Version: 4
    .... 0101 = Header Length: 20 bytes (5)
    Differentiated Services Field: 0x00 (DSCP: CS0, ECN: Not-ECT)
        0000 00.. = Differentiated Services Codepoint: Default (0)
        .... ..00 = Explicit Congestion Notification: Not ECN-Capable Transport (0)
    Total Length: 96
    Identification: 0x1018 (4120)
    Flags: 0x00
        0... .... = Reserved bit: Not set
        .0.. .... = Don't fragment: Not set
        ..0. .... = More fragments: Not set
    Fragment offset: 0
    Time to live: 255
    Protocol: Generic Routing Encapsulation (47)  <-- GRE tunnel encapsulation.
    Header checksum: 0x9c56 [validation disabled]
        [Good: False]
        [Bad: False]
    Source: 192.168.1.2              <-- Source GRE IP tunnel.
    Destination: 192.168.1.1         <-- Destination GRE IP tunnel.
Generic Routing Encapsulation (ERSPAN)
    Flags and Version: 0x1000
        0... .... .... .... = Checksum Bit: No
        .0.. .... .... .... = Routing Bit: No
        ..0. .... .... .... = Key Bit: No
        ...1 .... .... .... = Sequence Number Bit: Yes
        .... 0... .... .... = Strict Source Route Bit: No
        .... .000 .... .... = Recursion control: 0
        .... .... 0000 0... = Flags (Reserved): 0
        .... .... .... .000 = Version: GRE (0)
    Protocol Type: ERSPAN (0x88be)         <--ERSPAN enable. 
    Sequence Number: 0
Encapsulated Remote Switch Packet Analysis
    0001 .... .... .... = Version: Type II (1)
    .... 0000 0001 1000 = Vlan: 10
    000. .... .... .... = Priority: 0
    ...1 .... .... .... = Unknown2: 1
    .... 1... .... .... = Direction: Outgoing (1)
    .... .0.. .... .... = Truncated: Not truncated (0)
    .... ..00 0000 0011 = SpanID: 3       <--ERSPAN ID.
    Unknown7: 00000002
Ethernet II, Src: Xerox_00:02:00 (00:00:08:00:02:00), Dst: Cisco_eb:90:68 (00:9e:1e:eb:90:68)  
  <snip>
(Internal data packet comes here, output truncated)

Dispositivo di destinazione ERSPAN

Programmazione software Cisco IOS

C9500-ERSPAN#show monitor session 1
Session 1
---------
Type                     : ERSPAN Destination Session
Status                   : Admin Enabled
Destination Ports        : Twe1/0/3
Source IP Address        : 192.168.1.1
Source ERSPAN ID         : 3

Programmazione SHIM

Verificare quale software invia all'hardware del programma (oggetto SHIM).

C9500-ERSPAN#show platform software monitor session 1
Span Session 1 (FED Session 0):
  Type:      ERSPAN Destination
  Prev type: Unknown
  Ingress Src Ports:
  Egress Src Ports: 
  Ingress Local Src Ports: (null)
  Egress Local Src Ports: (null)
  Destination Ports:  Twe1/0/3
  Ingress Src Vlans:
  Egress Src Vlans: 
  Ingress Up Src Vlans: (null)
  Egress Up Src Vlans:  (null)
  Src Trunk filter Vlans:
  RSPAN dst vlan: 0
  RSPAN src vlan: 0
  RSPAN src vlan sav: 0
  Dest port encap = 0x0004
  Dest port ingress encap = 0x0000
  Dest port ingress vlan = 0x0
  SrcSess: 0  DstSess: 1 DstPortCfgd: 1  RspnDstCfg: 0  RspnSrcVld: 0
  DstCliCfg: 0  DstPrtInit: 1  PsLclCfgd: 0
  Flags: 0x00000000
  Remote dest port: 0   Dest port group: 0
  FSPAN disabled
  FSPAN not notified
  ERSPAN Id    : 3
  ERSPAN Dst Ip: 192.168.1.1
  ERSPAN Vrf   : 0

Forward Manager-Forwarding Processor

Verificare il software inviato all'hardware del programma (FMAN FP Layer).

C9500-ERSPAN#show platform software swspan switch active r0 destination
Showing SPAN destination table summary info

Sess-id   IF-type   IF-id   Sess-type   
--------------------------------------
0         PORT      11       Local        <-- IF-if 0xb maps to Twe1/0/3 (Check under 'show platform software fed active ifm mapping').
0         ERSPAN    ERSPAN   DST  


C9500-ERSPAN#show platform software swspan R0 destination sess-id 0
Showing SPAN destination detail info

Session ID : 0
Intf Type : PORT       
Port dpidx :11         <--Match with IF-id
PD Sess Id : 0
Session Type : Local   <-- Type of monitor session
Ingress Fwd : No
Ingress Encape : Disabled
Ingress Vlan : 0
Encap Value : Replicate
RSPAN Vlan : 0

Session ID : 0
Intf Type : ERSPAN
Vlan id : 
PD Sess Id : 0
Session Type : ERSPAN DST
ERSPAN Id : 3
ERSPAN Dst Ip: 192.168.1.1
ERSPAN Src Ip: 0.0.0.0
GRE Prot  : 35006
MTU       : 0
IP Tos    : 0
IP Ttl    : 255
Cos       : 0
Vrf Id    : 0
Tunnel Ifid: 38         <-- 38 in Decimal is 0x26 in Hex which is the IF_ID of Tunnel1
ERSPAN En : TDL_TRUE

Forward Manager-Forwarding Processor

Verificare il software inviato all'hardware del programma (FMAN FP Layer).

C9500-ERSPAN#show platform software swspan switch active F0 counters  <-- (check for any error counters on PI/PD/HW).
Dump Switch SPAN FP operation counters

Source SPAN Config Counters

PI: Create 0 (err 0), Modify 0 (err 0), Delete 0 (err 0)  <-- PI = platform independent (Software/IOS). 
PD: Create 0 (err 0), Modify 0 (err 0), Delete 0 (err 0)  <-- PD = platform dependent (SHIM/FMAN/FED).
HW: Create 0 (err 0), Modify 0 (err 0), Delete 0 (err 0)  <-- HW = hardware (FED/ASIC).

Destination SPAN Config Counters

PI: Create 10 (err 0), Modify 6 (err 0), Delete 4 (err 0)
PD: Create 4 (err 0), Modify 0 (err 0), Delete 2 (err 0)
HW: Create 4 (err 0), Modify 0 (err 0), Delete 2 (err 0)

Filter SPAN Config Counters

PI: Create 0 (err 0), Modify 0 (err 0), Delete 0 (err 0)
PD: Create 0 (err 0), Modify 0 (err 0), Delete 0 (err 0)
HW: Create 0 (err 0), Modify 0 (err 0), Delete 0 (err 0)

C9500-ERSPAN#show platform software swspan switch active F0 destination 
Showing SPAN destination table summary info

Sess-id   IF-type   IF-id   Sess-type   
--------------------------------------
0         PORT      11       Local       
0         VLAN      0       ERSPAN DST

Driver motore di inoltro

Verificare il livello che programma l'ASIC (FED).

C9500-ERSPAN#show platform software fed switch active monitor 0
Session 0
---------
  Session Type         : ERSPAN Destination Session
  Source Ports         : RX: None TX: Tunnel1000000000
  Destination Ports    : TwentyFiveGigE1/0/3 
  Source VLANs         : None  
  Destination VLANs    : None  
  Source RSPAN VLAN    : 0
  DST RSPAN VLAN       : 0
  Encap                : Replicate
  Ingress Forwarding   : Disabled
  Filter VLANs         : None
  ERSPAN Enable        : 1
  ERSPAN Hw Programmed : 1
  ERSPAN Mandatory Cfg : 1
  ERSPAN Id            : 3
  Ip Tos               : 0 (DSCP:0)
  Ip Ttl               : 0
  Cos                  : 0
  Vrf Id               : 0
  Tunnel IfId          : 38                 <-- 38 in Decicmal is 0x26 in Hex which is the IF_ID of Tunnel1
  Dst Ip               : 192.168.1.1        
  Org Ip               : 0.0.0.0
  SGT count            : 0
  SGT Tag(s)           :

Verificare la programmazione tunnel hardware (FED).

C9500-ERSPAN#show platform software fed switch active ifm interfaces tunnel
Interface               IF_ID        State
----------------------------------------------------------------------
Tunnel1000000000        0x00000026   READY

C9500-ERSPAN#show platform software fed switch active ifm if-id 0x00000026
Interface IF_ID : 0x0000000000000026
Interface Name : Tunnel1000000000
Interface Block Pointer : 0x7f2cd48e9958
Interface Block State : READY
Interface State : Enabled
Interface Status : ADD
Interface Ref-Cnt : 5
Interface Type : TUNNEL

	Unit           : 0
	SNMP IF Index  : 0
	Encap L3If LE Handle : 0x7f2cd4904e08    <-- Hardware handle info (used to check final Hardware program state).
	Decap L3If LE Handle : 0x7f2cd48dabc8    <-- Hardware handle info (used to check final Hardware program state).
	Tunnel Mode    : 0 [gre]                 <-- Tunnel Protocol Enable.
	Hw Support     : Yes
	Tunnel Vrf     : 0
	IPv4 MTU       : 0
	IPv6 MTU       : 0
	IPv4 VRF ID    : 0
	IPv6 VRF ID    : 0
	Protocol flags : 0x0001 [ ipv4 ]
	Misc flags     : 0x0000 [ None ]
	ICMPv4 flags   : 0x03 [ unreachable redirect ]
	ICMPv6 flags   : 0x03 [ unreachable redirect ]
          
	Port Information
	Handle ............ [0xd4000043]
	Type .............. [L3-Tunnel]
	Identifier ........ [0x26]
	Unit .............. [38]
	Port Logical Tunnel Subblock
		Encap-L3ifle.......[0x7f2cd4904e08]     <-- Same number as previous highlighted output.
		Decap-L3ifle.......[0x7f2cd48dabc8]     <-- Same number as previous highlighted output.
		decap-portle.......[0x0]
		RI-decap...........[0x7f2cd49615d8]     <-- Same number as previous highlighted output.
		SI-decap...........[0x7f2cd4958dd8]     <-- Same number as previous highlighted output.
		Decap-Tcam_handle..[0x7f2cd46eee08]     <-- Same number as previous highlighted output.
		Tunnel_capability..[0x3]
		Encap-RCP-PMAP.....[0x0]
		GPN................[0]
<snip>

C9500-ERSPAN#show platform software fed switch active ifm mappings l3if-le | include L3IF|Tunnel
L3IF_LE                   Interface                         IF_ID               Type                  
0x00007f2cd48dabc8        Tunnel1000000000                  0x00000026          DECAP_L3_LE      <-- L3IF + IF_ID (DECAP) match here.        
0x00007f2cd4904e08        Tunnel1000000000                  0x00000026          ENCAP_L3_LE      <-- L3IF + IF_ID (ENCAP) match here.

### Encapsulation LE ###

C9500-ERSPAN#show platform hardware fed switch active fwd-asic abstraction print-resource-handle 0x7f2cd4904e08 0 <--ENCAP
Handle:0x7f2cd4904e08 Res-Type:ASIC_RSC_L3IF_LE Res-Switch-Num:255 Asic-Num:255 Feature-ID:AL_FID_IFM Lkp-ftr-id:LKP_FEAT_INVALID ref_count:1
priv_ri/priv_si Handle: (nil)Hardware Indices/Handles: index0:0x27  mtu_index/l3u_ri_index0:0x2  sm handle [ASIC 0]: 0x7f2cd46ece38 index1:0x27 mtu_index/l3u_ri_index1:0x4 

==============================================================

### Decapsulation LE ###

C9500-ERSPAN#show platform hardware fed switch active fwd-asic abstraction print-resource-handle 0x7f2cd48dabc8 0 <--DECAP
Handle:0x7f2cd48dabc8 Res-Type:ASIC_RSC_L3IF_LE Res-Switch-Num:255 Asic-Num:255 Feature-ID:AL_FID_IFM Lkp-ftr-id:LKP_FEAT_INVALID ref_count:1
priv_ri/priv_si Handle: (nil)Hardware Indices/Handles: index0:0x28 mtu_index/l3u_ri_index0:0x0 sm handle [ASIC 0]: 0x7f2cd46d91c8 index1:0x28 mtu_index/l3u_ri_index1:0x0

### Rewrite Index (decapsulation) ###

C9500-ERSPAN#show platform hardware fed switch active fwd-asic abstraction print-resource-handle 0x7f2cd49615d8 1   <-- RI-decap
Handle:0x7f2cd49615d8 Res-Type:ASIC_RSC_RI Res-Switch-Num:255 Asic-Num:255 Feature-ID:AL_FID_GRE Lkp-ftr-id:LKP_FEAT_INVALID ref_count:1
priv_ri/priv_si Handle: 0x7f2cd48daf28Hardware Indices/Handles: index0:0x16 mtu_index/l3u_ri_index0:0x0 index1:0x16 mtu_index/l3u_ri_index1:0x0
Features sharing this resource:107 (1)]
Cookie length: 56
00 00 00 00 00 00 00 00 28 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 6b 33 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Detailed Resource Information (ASIC# 0)
----------------------------------------

Rewrite Data Table Entry, 
ASIC#:0 RI:22 Rewrite_type:AL_RRM_REWRITE_IPV4_ERSPAN2_DECAP(61) Mapped_rii:TUNNEL_IPv4Erspan_DECAP(83)

  L3IF LE Index: 40           <-- 64 in Decimal is 0x40 in Hex which matches Decap LE index seen above

Detailed Resource Information (ASIC# 1)
----------------------------------------
          
Rewrite Data Table Entry, 
ASIC#:1 RI:22 Rewrite_type:AL_RRM_REWRITE_IPV4_ERSPAN2_DECAP(61) Mapped_rii:TUNNEL_IPv4Erspan_DECAP(83)

 L3IF LE Index:	 40
==============================================================

### Station Index (decapsulation) ###

C9500-ERSPAN#show platform hardware fed switch active fwd-asic abstraction print-resource-handle 0x7f2cd4958dd8 1  <-- SI-decap
Handle:0x7f2cd4958dd8 Res-Type:ASIC_RSC_SI Res-Switch-Num:255 Asic-Num:255 Feature-ID:AL_FID_GRE Lkp-ftr-id:LKP_FEAT_INVALID ref_count:1
priv_ri/priv_si Handle: 0x7f2cd49615d8Hardware Indices/Handles: index0:0xae mtu_index/l3u_ri_index0:0x0 index1:0xae mtu_index/l3u_ri_index1:0x0
Features sharing this resource:107 (1)]
Cookie length: 56
00 00 00 00 00 00 00 00 28 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 6b 36 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Detailed Resource Information (ASIC# 0)
----------------------------------------

Station Index (SI) [0xae]
RI = 0x16
DI = 0x5012
stationTableGenericLabel = 0
stationFdConstructionLabel = 0x7
lookupSkipIdIndex = 0x15
rcpServiceId = 0
dejaVuPreCheckEn = 0
Replication Bitmap: LD 
Detailed Resource Information (ASIC# 1)
----------------------------------------

Station Index (SI) [0xae]
RI = 0x16
DI = 0x5012
stationTableGenericLabel = 0
stationFdConstructionLabel = 0x7
lookupSkipIdIndex = 0x15
rcpServiceId = 0
dejaVuPreCheckEn = 0
Replication Bitmap: CD 
==============================================================

### Tunnel Decap (TCAM) ###

C9500-ERSPAN#show platform hardware fed switch active fwd-asic abstraction print-resource-handle 0x7f2cd46eee08 1  <-- Decap-Tcam_handle.
Handle:0x7f2cd46eee08 Res-Type:ASIC_RSC_HASH_TCAM Res-Switch-Num:0 Asic-Num:255 Feature-ID:AL_FID_GRE Lkp-ftr-id:LKP_FEAT_TT_IPV4_GRE ref_count:1
priv_ri/priv_si Handle: (nil)Hardware Indices/Handles: handle [ASIC: 0]: 0x7f2cd48db018

Detailed Resource Information (ASIC# 0)
----------------------------------------
Number of HTM Entries: 3

Entry 0: (handle 0x7f2cd48db018)
Labels  Port   Vlan   L3If   Group
M:      0000   0000   0000   0000
V:      0000   0000   0000   0000

M: ffffffff 00000000 00000000 000003ff 00000000 00000100 01000000 00000fff
3f000000 
V: c0a80101 00000000 00000000 00000003 00000000 00000100 01000000 00000000      <-- c0a80101 in Hex maps to 192.168.1.1
        00000000 

GREv4 Dst       Src     Key     C S R D E F VRF Fl L3P GreP Misc RCPSVCId
  M: ffffffff 00000000 00000000 0 0 0 0 0 1 000 0  00  0000 00 3f               <-- F=1 Forwarding
  V: c0a80101 00000000 00000000 0 0 0 0 0 1 000 0  00  0000 00 00        
Action: 00000100 06000000 00000000 00000000 00000000 00000000 000000ad 00000000 
        00000000 00000000 
RL2 RL3 ACF SPK CLPC LKV PRI STL LPC ADC LKI   SI 

0   1   0   0    0   0   6   0   0   0   0    ad                                <-- Hexadecimal value for Station Index.        
Start/Skip Word: 0x00000003
Start Feature, Terminate

Entry 1: (handle 0x7f2cd495c3f8)
Labels  Port   Vlan   L3If   Group
M:      0000   0000   0000   0000
V:      0000   0000   0000   0000

M: ffffffff 00000000 00000000 000003ff 00000000 00000100 00000000 000a0000 
        3f000000 
V: c0a80101 00000000 00000000 00000003 00000000 00000100 00000000 00080000 
        00000000 

GREv4 Dst       Src     Key     C S R D E F VRF Fl L3P GreP Misc RCPSVCId
  M: ffffffff 00000000 00000000 0 0 0 0 0 0 000 a  00  0000 00 3f
  V: c0a80101 00000000 00000000 0 0 0 0 0 0 000 8  00  0000 00 00
Action: 00000100 06000000 00000000 00000000 00000000 00000000 000000ad 00000000 
        00000000 00000000 
RL2 RL3 ACF SPK CLPC LKV PRI STL LPC ADC LKI   SI 

0   1   0   0    0   0   6   0   0   0   0   ad                     
Start/Skip Word: 0x00000000
No Start, Terminate


Entry 2: (handle 0x7f2cd46ef568)
Labels  Port   Vlan   L3If   Group
M:      0000   0000   0000   0000
V:      0000   0000   0000   0000

M: ffffffff 00000000 00000000 000003ff 00000000 00000100 00000000 00020fff
        00000000 
V: c0a80101 00000000 00000000 00000003 00000000 00000100 00000000 00000000 
        00000000 

GREv4 Dst       Src     Key     C S R D E F VRF Fl L3P GreP Misc RCPSVCId
  M: ffffffff 00000000 00000000 0 0 0 0 0 0 000 2  00  0000 00 00
  V: c0a80101 00000000 00000000 0 0 0 0 0 0 000 0  00  0000 00 00
Action: 00000100 06000000 00000000 00000000 00000000 00000000 000000ae 00000000 
        00000000 00000000 
RL2 RL3 ACF SPK CLPC LKV PRI STL LPC ADC LKI   SI 

0   1   0   0    0   0   6   0   0   0   0   ae                                <-- Hexadecimal value for Station Index.
Start/Skip Word: 0x00000000
No Start, Terminate
==============================================================

C9500-ERSPAN#show platform hardware fed switch active fwd-asic resource asic 0 station-index range 0xab 0xab        
ASIC#0:
Station Index (SI) [0xad]
RI = 0x14
DI = 0x505a                  <-- Destination Index                      
stationTableGenericLabel = 0
stationFdConstructionLabel = 0x7
lookupSkipIdIndex = 0x15
rcpServiceId = 0xd
dejaVuPreCheckEn = 0
Replication Bitmap: LD

C9500-ERSPAN#show platform hardware fed switch active fwd-asic resource asic 0 station-index range 0xae 0xae     

Station Index (SI) [0xae]
RI = 0x16
DI = 0x5012                 <-- Destination Index
stationTableGenericLabel = 0
stationFdConstructionLabel = 0x7
lookupSkipIdIndex = 0x15
rcpServiceId = 0
dejaVuPreCheckEn = 0
Replication Bitmap: LD

C9500-ERSPAN#show platform hardware fed switch active fwd-asic resource asic 0 destination-index range 0x505a 0x505a 

Destination index = 0x505a DI_RCP_PORT2
pmap = 0x00000000 0x00000000
cmi = 0x0
rcp_pmap = 0x2
al_rsc_cmi
CPU Map Index (CMI) [0]
ctiLo0 = 0
ctiLo1 = 0
ctiLo2 = 0
cpuQNum0 = 0
cpuQNum1 = 0
cpuQNum2 = 0
npuIndex = 0
stripSeg = 0
copySeg = 0

C9500-ERSPAN#show platform hardware fed switch active fwd-asic resource asic 0 destination-index range 0x5012 0x5012 
ASIC#0:
Destination Index (DI) [0x5012]
portMap = 0x00000000 00000000
cmi1 = 0
rcpPortMap = 0x1

CPU Map Index (CMI) [0]
ctiLo0 = 0
ctiLo1 = 0
ctiLo2 = 0
cpuQNum0 = 0
cpuQNum1 = 0
cpuQNum2 = 0
npuIndex = 0
stripSeg = 0
copySeg = 0

Debug e tracce rilevanti

Cisco IOS XE

debug monitor all
debug platform monitor

FMAN-RP

set platform software trace forwarding-manager switch <> R0 switch-span  verbose
show platform software trace message forwarding-manager switch <> R0

FMAN-FP

set platform software trace forwarding-manager switch <> F0 switch-span verbose
show platform software trace message forwarding-manager switch <> F0

FED

set platform software trace fed switch <> swspan verbose
set platform software trace fed switch <> asic_spn verbose
set platform software trace fed switch <> acl verbose  (Useful when ip/ipv6 filter is configured)
show platform software trace message fed switch <>

Informazioni correlate

Cronologia delle revisioni

Revisione	Data di pubblicazione	Commenti
3.0	29-Apr-2025	Aggiornamento dei requisiti di branding.
2.0	15-Nov-2023	SEO aggiornato, requisiti di personalizzazione, requisiti di stile e formattazione.
1.0	30-Aug-2022	Versione iniziale

Contributo dei tecnici Cisco

Piriyankaa Palanivel Ravikumar
Responsabile progetto tecnico
Ambrose Taylor
Tecnico tecnico per la consegna ai clienti
Gerardo Trejo
Tecnico di consulenza

Questo documento ti è stato utile?

Feedback

Contattaci

Apri una richiesta di assistenza
(Occorre un contratto di servizio Cisco)

Verifica di SPAN e ERSPAN sui dispositivi Catalyst serie 9000 Switch

Opzioni per il download

Linguaggio senza pregiudizi

Informazioni su questa traduzione

Sommario

Introduzione

Prerequisiti

Requisiti

Componenti usati

Prodotti correlati

Verifica SPAN

Esempio di rete

Configurazione SPAN

Verifica di ERSPAN

Esempio di rete

Configurazione ERSPAN

Dispositivo di origine

Programmazione software Cisco IOS

Programmazione SHIM

Processore route di gestione inoltro

Forward Manager-Forwarding Processor

Driver motore di inoltro

Dispositivo di destinazione ERSPAN

Programmazione software Cisco IOS

Programmazione SHIM

Forward Manager-Forwarding Processor

Forward Manager-Forwarding Processor

Driver motore di inoltro

Debug e tracce rilevanti

Cisco IOS XE

FMAN-RP

FMAN-FP

FED

Informazioni correlate

Cronologia delle revisioni

Contributo dei tecnici Cisco

Questo documento ti è stato utile?

Contattaci

Questo documento si applica a questi prodotti