Configurazione dell'host iSCSI Solaris su MDS/IPS-8

Opzioni per il download

  • PDF     (342.9 KB)
    Visualizza con Adobe Reader su diversi dispositivi
  • ePub     (248.9 KB)
    Visualizza in diverse app su iPhone, iPad, Android, Sony Reader o Windows Phone
  • Mobi (Kindle)     (276.8 KB)
    Visualizza su dispositivo Kindle o tramite app Kindle su più dispositivi
Aggiornato:8 ottobre 2018
ID documento:44860

Linguaggio senza pregiudizi

La documentazione per questo prodotto è stata redatta cercando di utilizzare un linguaggio senza pregiudizi. Ai fini di questa documentazione, per linguaggio senza di pregiudizi si intende un linguaggio che non implica discriminazioni basate su età, disabilità, genere, identità razziale, identità etnica, orientamento sessuale, status socioeconomico e intersezionalità. Le eventuali eccezioni possono dipendere dal linguaggio codificato nelle interfacce utente del software del prodotto, dal linguaggio utilizzato nella documentazione RFP o dal linguaggio utilizzato in prodotti di terze parti a cui si fa riferimento. Scopri di più sul modo in cui Cisco utilizza il linguaggio inclusivo.

Informazioni su questa traduzione

Cisco ha tradotto questo documento utilizzando una combinazione di tecnologie automatiche e umane per offrire ai nostri utenti in tutto il mondo contenuti di supporto nella propria lingua. Si noti che anche la migliore traduzione automatica non sarà mai accurata come quella fornita da un traduttore professionista. Cisco Systems, Inc. non si assume alcuna responsabilità per l’accuratezza di queste traduzioni e consiglia di consultare sempre il documento originale in inglese (disponibile al link fornito).

Introduzione

I driver Cisco Small Computer Systems Interface over IP (iSCSI) sono un componente chiave della soluzione iSCSI. Questi driver iSCSI risiedono sul server, dove:

  • Intercettare i comandi iSCSI.

  • Incapsula i comandi in pacchetti IP.

  • Reindirizzare i comandi su Cisco SN 5420, Cisco SN 5428, Cisco SN 5428-2 o Cisco MDS/IPS-8.

In questo documento vengono fornite configurazioni di esempio per l'host iSCSI Solaris su Cisco MDS/IPS-8.

Prerequisiti

Requisiti

Prima di provare questa configurazione, accertarsi di soddisfare i seguenti requisiti:

  • Installare il driver iSCSI compatibile con la versione di Solaris in uso, quindi creare la configurazione iSCSI su Cisco MDS 9000. Per la versione più aggiornata del driver (solaris-iscsi-3.3.5.tar.Z), consultare il documento Cisco iSCSI Drivers (solo utenti registrati). Il file README.txt è incluso nel file ZIP (TAR) del driver. Il file README.txt contiene:

    • Informazioni sul contratto di licenza

    • Istruzioni per l'installazione e la configurazione dei driver

    • Panoramica tecnica dell'architettura del driver

  • Consultare le sezioni relative ai requisiti di sistema nelle note di rilascio di Cisco iSCSI Driver for Sun Solaris per i requisiti del sistema operativo e delle patch.

  • Il driver iSCSI Cisco per Sun Solaris viene eseguito solo sui computer SPARC. Il driver non funziona con altri tipi di processore (ad esempio, x86).

Componenti usati

Le informazioni fornite in questo documento si basano sulle seguenti versioni software e hardware:

  • SunOS 5.9, SPARC Ultra-4 E450

    #uname -a

SunOS baboon 5.9 Generic sun4u sparc SUNW,Ultra-4

  • Driver Cisco iSCSI 3.3.3 per Solaris

    #pkginfo -l CSCOiscsi

   PKGINST:  CSCOiscsi
      NAME:  Cisco iSCSI device driver
  CATEGORY:  system
      ARCH:  sparc
   VERSION:  3.3.3
   BASEDIR:  /opt/CSCOiscsi
    VENDOR:  Cisco Systems, Inc.
      DESC:  Cisco iSCSI device driver 3.3.3
    PSTAMP:  solaris-920030807170521
  INSTDATE:  Aug 25 2003 23:41
   HOTLINE:  For contracted support, 1-800-553-2447,
             Cisco Technical Assistance Center (TAC)
     EMAIL:  For online help, go to http://www.cisco.com/
    STATUS:  completely installed
     FILES:       74 installed pathnames
                  16 shared pathnames
                  29 directories
                  32 executables
                2182 blocks used (approx)

#iscsi-ls -v

iSCSI driver version: 3.3.3

  • Cisco MDS 9216 con versione software 1.1.2

    canterbury#show module

Mod  Ports  Module-Type                     Model              Status
---  -----  ------------------------------- ------------------ ------------
1    16     1/2 Gbps FC/Supervisor          DS-X9216-K9-SUP    active *
2    8      IP Storage Module               DS-X9308-SMIP      ok
Mod  Sw           Hw      World-Wide-Name(s) (WWN)
---  -----------  ------  --------------------------------------------------
1    1.1(2)       1.0     20:01:00:0c:30:6c:24:40 to 20:10:00:0c:30:6c:24:40
2    1.1(2)       0.3     20:41:00:0c:30:6c:24:40 to 20:48:00:0c:30:6c:24:40

Mod  MAC-Address(es)                         Serial-Num
---  --------------------------------------  ----------
1    00-0b-be-f8-7f-08 to 00-0b-be-f8-7f-0c  JAB070804QK
2    00-05-30-00-ad-e2 to 00-05-30-00-ad-ee  JAB070806SB

* this terminal session

canterbury#show version

Cisco Storage Area Networking Operating System (SAN-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2003 by Cisco Systems, Inc. All rights reserved.
The copyright for certain works contained herein are owned by
Andiamo Systems, Inc. and/or other third parties and are used and
distributed under license.

Software
  BIOS:      version 1.0.7
  loader:    version 1.0(3a)
  kickstart: version 1.1(2)
  system:    version 1.1(2)

  BIOS compile time:       03/20/03
  kickstart image file is: bootflash:/k112
  kickstart compile time:  7/13/2003 20:00:00
  system image file is:    bootflash:/s112
  system compile time:     7/13/2003 20:00:00

Hardware
  RAM 963112 kB

  bootflash: 500736 blocks (block size 512b)
  slot0:          0 blocks (block size 512b)

  canterbury uptime is 16 days 20 hours 51 minute(s) 36 second(s)

  Last reset at 684726 usecs after Mon Aug 11 13:53:17 2003
    Reason: Reset Requested by CLI command reload
    System version: 1.1(2)

Le informazioni discusse in questo documento fanno riferimento a dispositivi usati in uno specifico ambiente di emulazione. Su tutti i dispositivi menzionati nel documento la configurazione è stata ripristinata ai valori predefiniti. Se la rete è operativa, valutare attentamente eventuali conseguenze derivanti dall'uso dei comandi.

Convenzioni

Per ulteriori informazioni sulle convenzioni usate, consultare il documento Cisco sulle convenzioni nei suggerimenti tecnici.

Premesse

Il modulo di storage IP fornisce agli host IP l'accesso ai dispositivi di storage Fibre Channel (FC). Il modulo di storage IP è un DS-X9308-SMIP che fornisce routing iSCSI trasparente. Gli host IP che utilizzano il protocollo iSCSI possono accedere in modo trasparente alle destinazioni iSCSI (FC Protocol [FCP]) sulla rete FC. L'host IP invia i comandi iSCSI incapsulati nelle PDU (Protocol Data Unit) iSCSI a una porta di archiviazione IP Cisco MDS 9000 su una connessione TCP/IP. Le interfacce Gigabit Ethernet (GE) opportunamente configurate sul modulo di storage IP forniscono connettività. Il modulo di storage IP:

  • Consente di creare destinazioni iSCSI virtuali e di mapparle alle destinazioni FC fisiche disponibili nella SAN FC

  • Presenta le destinazioni FC agli host IP come se le destinazioni fisiche fossero collegate localmente alla rete IP

Ogni host iSCSI che richiede l'accesso allo storage tramite il modulo di storage IP deve disporre di un driver iSCSI compatibile installato. Il driver iSCSI consente a un host iSCSI di trasportare le richieste e le risposte iSCSI su una rete IP con il protocollo iSCSI. Dal punto di vista di un sistema operativo host, il driver iSCSI sembra essere un driver di trasporto iSCSI simile a un driver FC per un canale periferica nell'host. Ogni host IP viene visualizzato come host FC dal punto di vista del dispositivo di storage.

Completare la procedura seguente per indirizzare iSCSI dall'host IP al dispositivo di storage FC:

  • Trasportare le richieste e le risposte iSCSI su una rete IP tra gli host e il modulo di storage IP.

  • Utilizzare il modulo di storage IP per instradare le richieste e le risposte iSCSI tra gli host di una rete IP e il dispositivo di storage FC (convertire iSCSI in FCP e viceversa).

  • Trasportare le richieste o le risposte FCP tra il modulo di storage IP e i dispositivi di storage FC.

Per impostazione predefinita, il modulo di storage IP non importa destinazioni FC in iSCSI. È necessario configurare il mapping dinamico o statico in modo che il modulo di storage IP renda le destinazioni FC disponibili agli iniziatori iSCSI. Le destinazioni FC mappate staticamente hanno un nome configurato quando sono configurate entrambe. Questa configurazione fornisce esempi di mapping statico.

Ogni volta che l'host iSCSI si connette al modulo di storage IP con mapping dinamico:

  • Viene creata una nuova porta FC N.

  • I nomi universali (WWN) dei nodi e i nomi universali (pWWN) delle porte allocati per questa porta N possono essere diversi.

Utilizzare il metodo di mappatura statica se è necessario ottenere gli stessi nWWN e pWWN per l'host iSCSI ogni volta che si connette al modulo di storage IP. È possibile utilizzare la mappatura statica sul modulo di storage IP per accedere ad array di storage FC intelligenti dotati di:

  • Controllo degli accessi

  • Mapping dei LUN (Logical Unit Number) e configurazione del masking basati sui pWWN o nWWN dell'iniziatore

Specificare questi elementi per controllare l'accesso a ogni destinazione iSCSI mappata staticamente:

  • Elenco delle porte di storage IP su cui vengono annunciate

  • Elenco di nomi di nodi iniziatore iSCSI a cui è consentito l'accesso

Il controllo degli accessi basato sullo zoning FC e il controllo degli accessi basato su iSCSI sono i due meccanismi attraverso i quali è possibile fornire il controllo degli accessi per iSCSI. È possibile utilizzare entrambi i metodi contemporaneamente. In questa configurazione è stato consentito lo zoning predefinito per una VSAN (Virtual Storage Area Network) specifica. I moduli di storage IP utilizzano elenchi di controllo degli accessi basati su nome nodo iSCSI e su zoning FC per imporre il controllo degli accessi durante il rilevamento iSCSI e la creazione di sessioni iSCSI.

L'iniziatore iSCSI può essere definito in modo statico in base all'indirizzo IP o al nome qualificato iSCSI (IQN). L'opzione proxy-initiator consente la creazione dinamica di iniziatori iSCSI in SAN-IOS 1.3 per gli switch Cisco MDS.

Il rilevamento iSCSI si verifica quando un host iSCSI crea una sessione di rilevamento iSCSI e esegue query per tutte le destinazioni iSCSI. Il modulo di storage IP restituisce solo l'elenco di destinazioni iSCSI a cui i criteri di controllo di accesso consentono all'host iSCSI di accedere.

La creazione di sessioni iSCSI si verifica quando un host IP avvia una sessione iSCSI. Il modulo di storage IP verifica:

  • Se la destinazione iSCSI specificata (nella richiesta di accesso alla sessione) è una destinazione mappata statica

  • Il nome del nodo iSCSI dell'host IP è autorizzato ad accedere alla destinazione

Se l'host IP non dispone dell'accesso, l'accesso viene rifiutato.

Il modulo di storage IP:

  • Crea una porta FC virtuale N (la porta N può già esistere) per questo host IP

  • Esegue una query sul server dei nomi FC per l'ID Fibre Channel (FCID) del nome WWN della destinazione FC a cui accede l'host IP

Il modulo di storage IP utilizza il nome WWN della porta N virtuale dell'host IP come richiedente della query del server dei nomi. Pertanto, il server dei nomi esegue una query applicata a livello di zona per pWWN e risponde alla query. La sessione iSCSI viene accettata se il server dei nomi restituisce l'FCID. In caso contrario, la richiesta di accesso viene rifiutata.

Configurazione

In questa sezione vengono presentate le informazioni necessarie per configurare le funzionalità descritte più avanti nel documento.

Nota: per ulteriori informazioni sui comandi menzionati in questo documento, usare lo strumento di ricerca dei comandi (solo utenti registrati).

Esempio di rete

Nel documento viene usata questa impostazione di rete:

sn5428_solaris_1.gif

Configurazioni

Nel documento vengono usate queste configurazioni:

babbuino (SunOS 5.9, SPARC E450)
Modificare i seguenti file sull'host Solaris:
  • /etc/iscsi.conf
  • /etc/iscsi.bindings
  • /kernel/drv/sd.conf
Di seguito viene riportato un esempio di output della configurazione. 
bash-2.05#cat /etc/iscsi.conf

# iSCSI configuration file - see iscsi.conf(4)

# DiscoveryAddress Settings
# -------------------------
# Add "DiscoveryAddress=xxx" entries for each iSCSI router instance.
# The driver will attempt to discover iSCSI targets at that address
# and make as many targets as possible available for use.
# 'xxx' can be an IP address or a hostname.  A TCP port number can be
# specified by appending a colon and the port number to the address.
# All entries have to start in column one and must not contain any
# whitespace.
#
# Example:
#
# DiscoveryAddress=scsirouter1
 DiscoveryAddress=10.48.69.199

!--- Configure the IP address of the GE interface that accepts iSCSI !--- requests from your host.

# The DiscoveryAddress Settings can take following entry.
#
# 1) Authentication Settings
# 2) ConnectionTimeout Settings

!--- Other required driver parameters can be changed in the iscsi.conf file. !--- Output is suppressed.

bash-2.05#cat /etc/iscsi.bindings

# iSCSI bindings, file format version 1.0.
# NOTE: this file is automatically maintained by the iSCSI daemon.
# You should not need to edit this file under most circumstances.
# If iSCSI targets in this file have been permanently deleted, you
# may wish to delete the bindings for the deleted targets.
#
# Format:
# bus   target  iSCSI
# id    id      TargetName
#
0       0       san-fc-jbod-1
0       1       clariion
0       2       clariion-lun-3-4-5

!--- The iSCSI driver discovery daemon process looks up each discovered target !--- in the /etc/iscsi.bindings file. !--- The corresponding iSCSI target ID is assigned to the target if an entry exists in the file for the target. !--- The smallest available iSCSI target ID !--- is assigned if no entry exists for the target, and an entry is written to the /etc/iscsi.bindings file for !--- this target. !--- Note that the /etc/iscsi.bindings file permanently contains entries !--- for all iSCSI targets ever logged into from this host. !--- You can manually edit the file and remove !--- entries so that the obsolete target no longer consumes an iSCSI target ID if a target is no longer available to a host. !--- Add an entry manually if you know the iSCSI target name !--- in advance and want it to be assigned a particular iSCSI target ID. !--- Stop the iSCSI driver before you edit the /etc/iscsi.bindings !--- file. Issue the !--- /etc/init.d/iscsi start command to manually start the iSCSI driver. !--- Issue the /etc/init.d/iscsi stop command to manually stop the iSCSI driver.

bash-2.05#cat /kernel/drv/sd.conf

name="sd" class="scsi" class_prop="atapi"
target=0 lun=0;

name="sd" class="scsi" target=1 lun=0;
name="sd" class="scsi" target=1 lun=1;
name="sd" class="scsi" target=1 lun=2;

# Start iSCSI auto-generated configuration -- do NOT alter or delete this line
# You may need to add additional lines to probe for additional LUNs
# or targets. You SHOULD delete any lines that represent iSCSI targets
# or LUNs that are not used.
name="sd" parent="iscsi" target=0 lun=0;
name="sd" parent="iscsi" target=1 lun=0;
name="sd" parent="iscsi" target=1 lun=1;
name="sd" parent="iscsi" target=1 lun=2;
name="sd" parent="iscsi" target=2 lun=3;
name="sd" parent="iscsi" target=2 lun=4;
name="sd" parent="iscsi" target=2 lun=5;
name="sd" parent="iscsi" target=2 lun=0;

# End iSCSI auto-generated configuration -- do NOT alter or delete this line


 !--- The corresponding entries for these devices must be made in the standard device configuration files !--- if the targets that get discovered by the iSCSI driver at any point in time !--- do not have a corresponding entry in the standard device configuration files (for example, /kernel/drv/sd.conf or /kernel/drv/st.conf). !--- Then reboot the system and issue the standard Solaris administrative commands !--- (devfsadm, drvconfig) once the system comes up. !--- You do not need to reboot the system if the entries in the device configuration files are already present. However, the standard device configuration !--- commands (devfsadm, drvconfig, and so on) must be issued to configure the !--- new iSCSI devices in the system.

canterbury (Cisco MDS 9216) 

!--- Output is suppressed.

vsan database
vsan 777

!--- VSAN 777 has been used for iSCSI targets. !--- Output is suppressed.

vsan database
vsan 777 interface fc1/4
vsan 777 interface fc1/7

!--- Output is suppressed.

boot system bootflash:/s112
boot kickstart bootflash:/k112

ip domain-name cisco.com
ip name-server 144.254.10.123
ip default-gateway 10.48.69.129

ip routing
iscsi authentication none
iscsi initiator ip-address 10.48.69.235

!--- Identifies the iSCSI initiator based on the IP address. A virtual N port is !--- created for each network interface card (NIC) or network interface.

  vsan 777

!--- VSAN 777 has been used for iSCSI targets. Configure the initiator IP address. !--- Targets via VSAN 777 are accessible by iSCSI initiators.

iscsi virtual-target name san-fc-jbod-1
  pWWN 21:00:00:20:37:67:f7:a2
advertise interface  GigabitEthernet2/1
initiator ip address 10.48.69.235 permit

!--- Create a static iSCSI virtual target for LUN 0, 1, and 2 of CLARiiON.

iscsi virtual-target name clariion
  pWWN 50:06:01:60:88:02:a8:2b fc-lun 0000 iscsi-lun 0000
  pWWN 50:06:01:60:88:02:a8:2b fc-lun 0001 iscsi-lun 0001
  pWWN 50:06:01:60:88:02:a8:2b fc-lun 0002 iscsi-lun 0002
advertise interface  GigabitEthernet2/1
initiator ip address 10.48.69.235 permit

!--- Create a static iSCSI virtual target for LUN 3, 4, and 5 of CLARiiON.

iscsi virtual-target name clariion-lun-3-4-5
  pWWN 50:06:01:60:88:02:a8:2b fc-lun 0003 iscsi-lun 0003
  pWWN 50:06:01:60:88:02:a8:2b fc-lun 0004 iscsi-lun 0004
  pWWN 50:06:01:60:88:02:a8:2b fc-lun 0005 iscsi-lun 0005
advertise interface  GigabitEthernet2/1
initiator ip address 10.48.69.235 permit

!--- Output is suppressed.

switchname canterbury

!--- Output is suppressed.

zone default-zone permit vsan 777

!--- Output is suppressed.

interface GigabitEthernet2/1
ip address 10.48.69.199 255.255.255.192
iscsi authentication none
switchport mtu 2156
no shutdown

!--- Output is suppressed.

interface fc1/4
no shutdown

!--- Output is suppressed.

interface fc1/7
no shutdown

 interface mgmt0
ip address 10.48.69.156 255.255.255.192

 interface iscsi2/1
no shutdown

Verifica

Per verificare che la configurazione funzioni correttamente, consultare questa sezione.

Lo strumento Output Interpreter (solo utenti registrati) (OIT) supporta alcuni comandi show. Usare l'OIT per visualizzare un'analisi dell'output del comando show.

  • netstat -n —Verifica le connessioni TCP sull'host Solaris.

  • iscsi-ls -l: visualizza i dispositivi attualmente disponibili sull'host Solaris.

  • show zone status - Visualizza le informazioni sulla zona.

  • show fcns database vsan 777: visualizza le informazioni sul server dei nomi per una VSAN specifica.

  • show floppy database vsan 777: visualizza le informazioni sul server di accesso all'infrastruttura (FLOGI) per una VSAN specifica.

  • show vSAN membership: visualizza le informazioni di interfaccia per le diverse VSAN.

  • show iscsi initiator detail: visualizza le informazioni sull'iniziatore iSCSI.

  • show iscsi initiator iscsi-session detail: visualizza informazioni dettagliate sulla sessione dell'iniziatore iSCSI.

  • show iscsi initiator fcp-session detail: visualizza informazioni dettagliate sulla sessione FCP dell'iniziatore iSCSI.

  • show ips stats tcp interface gigabitethernet 2/1 detail: visualizza le statistiche TCP per un'interfaccia GE specifica.

  • show iscsi virtual-target configure: visualizza le destinazioni virtuali iSCSI configurate su Cisco MDS 9000.

  • show iscsi initiator configure: visualizza gli iniziatori iSCSI configurati su Cisco MDS 9000.

  • show ips arp interface gigabitethernet 2/1: visualizza le informazioni ARP (IP storage Address Resolution Protocol) per un'interfaccia GE specifica.

  • show scsi-target devices vsan 777: visualizza i dispositivi iSCSI per una VSAN specifica (per mappare le LUN FC alle LUN iSCSI).

  • show int iscsi 2/1: visualizza le interfacce iSCSI.

  • show iscsi stats iscsi 2/1: visualizza le statistiche iSCSI.

  • show int gigabitethernet 2/1: visualizza l'interfaccia GE.

  • show ip route: visualizza le informazioni sulla route IP.

Risoluzione dei problemi

Utilizzare questa sezione per risolvere i problemi relativi alla configurazione.

Procedura di risoluzione dei problemi

output babbuino 
bash-2.05# /etc/init.d/iscsi stop

iSCSI is stopping.
Aug 28 09:42:08 baboon iscsimod: iSCSIs: closing connection to target 2 at 10.48.69.199
Aug 28 09:42:08 baboon iscsimod: iSCSIs: closing connection to target 1 at 10.48.69.199
Aug 28 09:42:08 baboon iscsimod: iSCSIs: closing connection to target 0 at 10.48.69.199

bash-2.05# /etc/init.d/iscsi start

iSCSI is starting.

bash-2.05#bash-2.05# netstat -n

TCP: IPv4
   Local Address        Remote Address    Swind Send-Q Rwind Recv-Q  State
-------------------- -------------------- ----- ------ ----- ------ -------
10.48.69.235.32797   10.48.69.199.3260    65535      0 49172    0   ESTABLISHED
10.48.69.235.32798   10.48.69.199.3260    9379072    0 263152   0   ESTABLISHED
10.48.69.235.32799   10.48.69.199.3260    9379072    0 263152   0   ESTABLISHED

Active UNIX domain sockets
Address  Type          Vnode       Conn     Local Addr      Remote Addr
30002d95c88 dgram      30000205828 00000000 /tmp/portal

/etc/iscsi.bindings

#
0       0       san-fc-jbod-1
0       1       clariion

bash-2.05# devfsadm

Aug 28 09:45:04 baboon iscsimod: NOTICE: iSCSIs: bus 0 tgt 1 lun 0, Cmd 0x4d, Sense:
Aug 28 09:45:04 baboon iscsimod:     70000500 0000000a 00000000 20000000 0000
Aug 28 09:45:04 baboon iscsimod: NOTICE: iSCSIs: bus 0 tgt 1 lun 0, Cmd 0x5e, Sense:
Aug 28 09:45:04 baboon iscsimod:     70000500 0000000a 00000000 20000000 0000
Aug 28 09:45:04 baboon iscsimod: NOTICE: iSCSIs: bus 0 tgt 1 lun 1, Cmd 0x00, Sense:
Aug 28 09:45:04 baboon iscsimod:     70000600 0000000a 00000000 29000000 0000
Aug 28 09:45:04 baboon iscsimod: NOTICE: iSCSIs: bus 0 tgt 1 lun 1, Cmd 0x4d, Sense:
Aug 28 09:45:04 baboon iscsimod:     70000500 0000000a 00000000 20000000 0000
Aug 28 09:45:04 baboon iscsimod: NOTICE: iSCSIs: bus 0 tgt 1 lun 1, Cmd 0x5e, Sense:
Aug 28 09:45:04 baboon iscsimod:     70000500 0000000a 00000000 20000000 0000
Aug 28 09:45:04 baboon iscsimod: NOTICE: iSCSIs: bus 0 tgt 1 lun 2, Cmd 0x00, Sense:
Aug 28 09:45:04 baboon iscsimod:     70000600 0000000a 00000000 29000000 0000
Aug 28 09:45:04 baboon iscsimod: NOTICE: iSCSIs: bus 0 tgt 1 lun 2, Cmd 0x4d, Sense:
Aug 28 09:45:04 baboon iscsimod:     70000500 0000000a 00000000 20000000 0000
Aug 28 09:45:04 baboon iscsimod: NOTICE: iSCSIs: bus 0 tgt 1 lun 2, Cmd 0x5e, Sense:
Aug 28 09:45:04 baboon iscsimod:     70000500 0000000a 00000000 20000000 0000
Aug 28 09:45:05 baboon iscsimod: NOTICE: iSCSIs: bus 0 tgt 0 lun 0, Cmd 0x1c, Sense:
Aug 28 09:45:05 baboon iscsimod:     70000500 0000000a 00000000 35010300 0000

bash-2.05# format output

AVAILABLE DISK SELECTIONS:
       0. c0t0d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
          /pci@1f,4000/scsi@3/sd@0,0
       1. c0t1d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
          /pci@1f,4000/scsi@3/sd@1,0
       2. c3t0d0 <SEAGATE-ST318203FC-0004 cyl 9770 alt 2 hd 12 sec 303>
          /iscsipseudo/iscsi@0/sd@0,0
       3. c3t1d0 <DGC-RAID0-0632 cyl 5459 alt 2 hd 3 sec 128>
          /iscsipseudo/iscsi@0/sd@1,0
       4. c3t1d1 <DGC-RAID0-0632 cyl 5459 alt 2 hd 3 sec 128>
          /iscsipseudo/iscsi@0/sd@1,1
       5. c3t1d2 <DGC-RAID0-0632 cyl 5459 alt 2 hd 3 sec 128>
          /iscsipseudo/iscsi@0/sd@1,2
       6. c3t2d0 <drive not available>
          /iscsipseudo/iscsi@0/sd@2,0

!--- After you add the clariion-lun-3-4-5 virtual target on the Cisco MDS 9216.

/etc/iscsi.bindings

0       0       san-fc-jbod-1
0       1       clariion
0       2       clariion-lun-3-4-5

bash-2.05#bash-2.05# netstat -n

TCP: IPv4
   Local Address        Remote Address    Swind Send-Q Rwind Recv-Q  State
-------------------- -------------------- ----- ------ ----- ------ -------
10.48.69.235.32797   10.48.69.199.3260    65535      0 49172      0 TIME_WAIT
10.48.69.235.32798   10.48.69.199.3260    9379072    0 263152     0 ESTABLISHED
10.48.69.235.32799   10.48.69.199.3260    9379072    0 263152     0 ESTABLISHED
10.48.69.235.32800   10.48.69.199.3260    65535      0 49108      0 ESTABLISHED
10.48.69.235.32801   10.48.69.199.3260    9379072    0 263152     0 ESTABLISHED

Active UNIX domain sockets
Address  Type          Vnode       Conn     Local Addr      Remote Addr
30002d95c88 dgram      30000205828 00000000 /tmp/portal

bash-2.05# devfsadm

Aug 28 09:47:58 baboon iscsimod: NOTICE: iSCSIs: bus 0 tgt 2 lun 3, Cmd 0x00, Sense:
Aug 28 09:47:58 baboon iscsimod:     70000600 0000000a 00000000 29000000 0000
Aug 28 09:47:58 baboon iscsimod: NOTICE: iSCSIs: bus 0 tgt 2 lun 3, Cmd 0x4d, Sense:
Aug 28 09:47:58 baboon iscsimod:     70000500 0000000a 00000000 20000000 0000
Aug 28 09:47:58 baboon iscsimod: NOTICE: iSCSIs: bus 0 tgt 2 lun 3, Cmd 0x5e, Sense:
Aug 28 09:47:58 baboon iscsimod:     70000500 0000000a 00000000 20000000 0000
Aug 28 09:47:58 baboon iscsimod: NOTICE: iSCSIs: bus 0 tgt 2 lun 4, Cmd 0x00, Sense:
Aug 28 09:47:58 baboon iscsimod:     70000600 0000000a 00000000 29000000 0000
Aug 28 09:47:58 baboon iscsimod: NOTICE: iSCSIs: bus 0 tgt 2 lun 4, Cmd 0x5e, Sense:
Aug 28 09:47:58 baboon iscsimod:     70000500 0000000a 00000000 20000000 0000
Aug 28 09:47:58 baboon iscsimod: NOTICE: iSCSIs: bus 0 tgt 2 lun 5, Cmd 0x00, Sense:
Aug 28 09:47:58 baboon iscsimod:     70000600 0000000a 00000000 29000000 0000
Aug 28 09:47:58 baboon iscsimod: NOTICE: iSCSIs: bus 0 tgt 2 lun 5, Cmd 0x4d, Sense:
Aug 28 09:47:58 baboon iscsimod:     70000500 0000000a 00000000 20000000 0000
Aug 28 09:47:58 baboon iscsimod: NOTICE: iSCSIs: bus 0 tgt 2 lun 5, Cmd 0x5e, Sense:
Aug 28 09:47:58 baboon iscsimod:     70000500 0000000a 00000000 20000000 0000

And the format output:
       0. c0t0d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
          /pci@1f,4000/scsi@3/sd@0,0
       1. c0t1d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
          /pci@1f,4000/scsi@3/sd@1,0
       2. c3t0d0 <SEAGATE-ST318203FC-0004 cyl 9770 alt 2 hd 12 sec 303>
          /iscsipseudo/iscsi@0/sd@0,0
       3. c3t1d0 <DGC-RAID0-0632 cyl 5459 alt 2 hd 3 sec 128>
          /iscsipseudo/iscsi@0/sd@1,0
       4. c3t1d1 <DGC-RAID0-0632 cyl 5459 alt 2 hd 3 sec 128>
          /iscsipseudo/iscsi@0/sd@1,1
       5. c3t1d2 <DGC-RAID0-0632 cyl 5459 alt 2 hd 3 sec 128>
          /iscsipseudo/iscsi@0/sd@1,2
       6. c3t2d0 <drive not available>
          /iscsipseudo/iscsi@0/sd@2,0
       7. c3t2d3 <DGC-RAID0-0632 cyl 10920 alt 2 hd 3 sec 128>
          /iscsipseudo/iscsi@0/sd@2,3
       8. c3t2d4 <DGC-RAID0-0632 cyl 5459 alt 2 hd 3 sec 128>
          /iscsipseudo/iscsi@0/sd@2,4
       9. c3t2d5 <DGC-RAID0-0632 cyl 5459 alt 2 hd 3 sec 128>
          /iscsipseudo/iscsi@0/sd@2,5

!--- Issue the iscsi-ls -v command to see iSCSI driver version.

bash-2.05# iscsi-ls -v

iSCSI driver version: 3.3.3

!--- Issue the iscsi-ls -l or iscsi-ls commands to see the devices that are currently available.

bash-2.05# iscsi-ls -l

********************************************************************************
TARGET NAME san-fc-jbod-1
TARGET ID 0:
  ADDRESS = 10.48.69.199:3260, 128
  STATUS  = Connected 10.48.69.235:32798<->10.48.69.199:3260  8/28/2003 09:43:59
  SESSION = ISID 00023d000001  TSID 128  PID 463
  LUN   0 = DISK c3t0d0 (sd296) 'SEAGATE-ST318203FC-0004' SERIAL# LRE80915
            BLOCKS: 35566479  BLOCK SIZE: 512
********************************************************************************
TARGET NAME clariion
TARGET ID 1:
  ADDRESS = 10.48.69.199:3260, 128
  STATUS  = Connected 10.48.69.235:32799<->10.48.69.199:3260  8/28/2003 09:43:59
  SESSION = ISID 00023d000001  TSID 128  PID 464
  LUN   0 = DISK c3t1d0 (sd297) 'DGC-RAID 0-0632' SERIAL# 008E080000CL
            BLOCKS: 2097023  BLOCK SIZE: 512
  LUN   1 = DISK c3t1d1 (sd298) 'DGC-RAID 0-0632' SERIAL# 0127AB0000CL
            BLOCKS: 2097023  BLOCK SIZE: 512
  LUN   2 = DISK c3t1d2 (sd299) 'DGC-RAID 0-0632' SERIAL# 02E4180000CL
            BLOCKS: 2097023  BLOCK SIZE: 512
********************************************************************************
TARGET NAME clariion-lun-3-4-5
TARGET ID 2:
  ADDRESS = 10.48.69.199:3260, 128
  STATUS  = Connected 10.48.69.235:32801<->10.48.69.199:3260  8/28/2003 09:46:42
  SESSION = ISID 00023d000001  TSID 128  PID 482
  LUN   0 : SCSI Inquiry failed - Bad file number
  LUN   3 = DISK c3t2d3 (sd371) 'DGC-RAID 0-0632' SERIAL# 03E0A1E330CL
            BLOCKS: 4194047  BLOCK SIZE: 512
  LUN   4 = DISK c3t2d4 (sd372) 'DGC-RAID 0-0632' SERIAL# 04E9A1E330CL
            BLOCKS: 2097023  BLOCK SIZE: 512
  LUN   5 = DISK c3t2d5 (sd373) 'DGC-RAID 0-0632' SERIAL# 0594B1E330CL
            BLOCKS: 2097023  BLOCK SIZE: 512
********************************************************************************

 !-- Issue the iscsi-ls -c command to see detailed statistics for currently established iSCSI sessions.

bash-2.05# iscsi-ls -c

********************************************************************************
TARGET NAME san-fc-jbod-1
TARGET ID 0:
  ADDRESS = 10.48.69.199:3260, 128
  STATUS  = Connected 10.48.69.235:32798<->10.48.69.199:3260  8/28/2003 09:43:59
  SESSION = ISID 00023d000001  TSID 128  PID 463
  InitialR2T               = Yes
  MaxRecvDataSegmentLength = 131072 Bytes
  MaxXmitDataSegmentLength = 2048 Bytes
  FirstBurstLength         = 262144 Bytes
  MaxBurstLength           = 16776192 Bytes
  LoginTimeout             = 15 Seconds
  AuthTimeout              = 45 Seconds
  ActiveTimeout            = 5 Seconds
  IdleTimeout              = 60 Seconds
  PingTimeout              = 5 Seconds
  HeaderDigest             = None
  DataDigest               = None
  ConnFailTimeout          = Default
  MultiPath                = None
********************************************************************************
TARGET NAME clariion
TARGET ID 1:
  ADDRESS = 10.48.69.199:3260, 128
  STATUS  = Connected 10.48.69.235:32799<->10.48.69.199:3260  8/28/2003 09:43:59
  SESSION = ISID 00023d000001  TSID 128  PID 464
  InitialR2T               = Yes
  MaxRecvDataSegmentLength = 131072 Bytes
  MaxXmitDataSegmentLength = 2048 Bytes
  FirstBurstLength         = 262144 Bytes
  MaxBurstLength           = 16776192 Bytes
  LoginTimeout             = 15 Seconds
  AuthTimeout              = 45 Seconds
  ActiveTimeout            = 5 Seconds
  IdleTimeout              = 60 Seconds
  PingTimeout              = 5 Seconds
  HeaderDigest             = None
  DataDigest               = None
  ConnFailTimeout          = Default
  MultiPath                = None
********************************************************************************
TARGET NAME clariion-lun-3-4-5
TARGET ID 2:
  ADDRESS = 10.48.69.199:3260, 128
  STATUS  = Connected 10.48.69.235:32801<->10.48.69.199:3260  8/28/2003 09:46:42
  SESSION = ISID 00023d000001  TSID 128  PID 482
  InitialR2T               = Yes
  MaxRecvDataSegmentLength = 131072 Bytes
  MaxXmitDataSegmentLength = 2048 Bytes
  FirstBurstLength         = 262144 Bytes
  MaxBurstLength           = 16776192 Bytes
  LoginTimeout             = 15 Seconds
  AuthTimeout              = 45 Seconds
  ActiveTimeout            = 5 Seconds
  IdleTimeout              = 60 Seconds
  PingTimeout              = 5 Seconds
  HeaderDigest             = None
  DataDigest               = None
  ConnFailTimeout          = Default
  MultiPath                = None
********************************************************************************

!--- You can see these iSCSI connections in the /var/adm/messages or dmesg:

Aug 28 09:43:59 baboon iscsid[454]: [ID 702911 daemon.notice]
   version 3.3.3 ( 7-Aug-2003)
Aug 28 09:43:59 baboon iscsid[463]: [ID 702911 daemon.notice]
   iSCSI normal session to san-fc-jbod-1 estabished
Aug 28 09:43:59 baboon iscsid[463]: [ID 702911 daemon.notice]
   logged into target san-fc-jbod-1 -- id 0, Initiator sid 00023d000001, target sid 128
Aug 28 09:43:59 baboon iscsid[464]: [ID 702911 daemon.notice]
   iSCSI normal session to clariion estabished
Aug 28 09:43:59 baboon iscsid[464]: [ID 702911 daemon.notice]
   logged into target clariion -- id 1, Initiator sid 00023d000001, target sid 128
Aug 28 09:45:23 baboon iscsi: [ID 318680 kern.notice] NOTICE:
   tran_start disabled to bus 0, target 2, lun 0
Aug 28 09:46:42 baboon iscsid[482]: [ID 702911 daemon.notice]
   iSCSI normal session to clariion-lun-3-4-5 established
Aug 28 09:46:42 baboon iscsid[482]: [ID 702911 daemon.notice]
   logged into target clariion-lun-3-4-5 -- id 2, Initiator sid 00023d000001,
   target sid 128

Uscita canterbury Cisco MDS 9216 
canterbury#show zone status

VSAN: 1 default-zone: permit distribute: active only Interop: Off
Full Zoning Database :
    Zonesets:0  Zones:0 Aliases: 0
Active Zoning Database :
    Database Not Available
Status: Deactivation completed at Fri Aug 22 11:47:53 2003

VSAN: 777 default-zone: permit distribute: active only Interop: Off.
Full Zoning Database :
    Zonesets:0  Zones:0 Aliases: 0
Active Zoning Database :
    Database Not Available
Status: Default zoning policy changed to permit at Mon Aug 25 20:19:31 2003

!--- VSAN 777 has been used for this configuration, and default-zone behavior has been !--- set to permit.

canterbury#show flogi da vsan 777

---------------------------------------------------------------------------
INTERFACE  VSAN    FCID            PORT NAME               NODE NAME
---------------------------------------------------------------------------
fc1/4      777   0x7000e8  21:00:00:20:37:67:f7:a2  20:00:00:20:37:67:f7:a2
fc1/7      777   0x700103  50:06:01:60:88:02:a8:2b  50:06:01:60:11:02:a8:2b
iscsi2/1   777   0x700100  21:02:00:0c:30:6c:24:42  21:01:00:0c:30:6c:24:42

Total number of flogi = 3.

canterbury#show fcns database vsan 777

VSAN 777:
--------------------------------------------------------------------------
FCID        TYPE  PWWN                    (VENDOR)        FC4-TYPE:FEATURE
--------------------------------------------------------------------------
0x7000e8    NL    21:00:00:20:37:67:f7:a2 (Seagate)       scsi-fcp:target
0x700100    N     21:02:00:0c:30:6c:24:42 (Cisco)         scsi-fcp:init isc..w
0x700103    N     50:06:01:60:88:02:a8:2b (Clariion)      scsi-fcp:target

Total number of entries = 3

!--- FCID 0X700100 is the virtual N port (HBA) for the iSCSI host.

canterbury#show fcns database detail vsan 777

------------------------
VSAN:777   FCID:0x7000e8
------------------------
port-wwn (vendor)     :21:00:00:20:37:67:f7:a2 (Seagate)
node-wwn              :20:00:00:20:37:67:f7:a2
class                 :3
node-ip-addr          :0.0.0.0
ipa                   :ff ff ff ff ff ff ff ff
fc4-types:fc4_features:scsi-fcp:target
symbolic-port-name    :
symbolic-node-name    :
port-type             :NL
port-ip-addr          :0.0.0.0
fabric-port-wwn       :20:04:00:0c:30:6c:24:40
hard-addr             :0x000000
------------------------
VSAN:777   FCID:0x700100
------------------------
port-wwn (vendor)     :21:02:00:0c:30:6c:24:42 (Cisco)
node-wwn              :21:01:00:0c:30:6c:24:42
class                 :2,3
node-ip-addr          :10.48.69.235
ipa                   :ff ff ff ff ff ff ff ff
fc4-types:fc4_features:scsi-fcp:init iscsi-gw

!--- Virtual N port for host.

symbolic-port-name    :
symbolic-node-name    :10.48.69.235
port-type             :N 
port-ip-addr          :0.0.0.0
fabric-port-wwn       :20:41:00:0c:30:6c:24:40
hard-addr             :0x000000
------------------------
VSAN:777   FCID:0x700103
------------------------
port-wwn (vendor)     :50:06:01:60:88:02:a8:2b (Clariion)
node-wwn              :50:06:01:60:11:02:a8:2b
class                 :3
node-ip-addr          :0.0.0.0
ipa                   :ff ff ff ff ff ff ff ff
fc4-types:fc4_features:scsi-fcp:target
symbolic-port-name    :
symbolic-node-name    :
port-type             :N
port-ip-addr          :0.0.0.0
fabric-port-wwn       :20:07:00:0c:30:6c:24:40
hard-addr             :0x000000

Total number of entries = 3

canterbury#show vsan membership

vsan 777 interfaces:
        fc1/4   fc1/7

canterbury#show iscsi initiator

iSCSI Node name is 10.48.69.235
    iSCSI Initiator name: iqn.1987-05.com.cisco:01.894b196796e7
    iSCSI alias name: baboon
    Node WWN is 21:01:00:0c:30:6c:24:42 (dynamic)
    Member of vsans: 777
    Number of Virtual n_ports: 1
    Virtual Port WWN is 21:02:00:0c:30:6c:24:42 (dynamic)
      Interface iSCSI 2/1, Portal group tag: 0x80
      VSAN ID 777, FCID 0x700100

canterbury#show iscsi initiator detail

iSCSI Node name is 10.48.69.235
    iSCSI Initiator name: iqn.1987-05.com.cisco:01.894b196796e7
    iSCSI alias name: baboon
    Node WWN is 21:01:00:0c:30:6c:24:42 (dynamic)
    Member of vsans: 777
    Number of Virtual n_ports: 1

    Virtual Port WWN is 21:02:00:0c:30:6c:24:42 (dynamic)
      Interface iSCSI 2/1, Portal group tag is 0x80
      VSAN ID 777, FCID 0x700100
      2 FC sessions, 3 iSCSI sessions
      iSCSI session details
        Target: san-fc-jbod-1
          Statistics:
            PDU: Command: 24, Response: 24
            Bytes: TX: 3504, RX: 0
            Number of connection: 1
          TCP parameters
            Local 10.48.69.199:3260, Remote 10.48.69.235:32798
            Path MTU: 1500 bytes
            Retransmission timeout: 300 ms
            Round trip time: Smoothed 4 ms, Variance: 6
            Advertized window: Current: 256 KB, Maximum: 257 KB, Scale: 3
            Peer receive window: Current: 9159 KB, Maximum: 9159 KB, Scale: 8
            Congestion window: Current: 11 KB
        Target: clariion-lun-3-4-5
          Statistics:
            PDU: Command: 73, Response: 73
            Bytes: TX: 9740, RX: 0
            Number of connection: 1
          TCP parameters
            Local 10.48.69.199:3260, Remote 10.48.69.235:32801
            Path MTU: 1500 bytes
            Retransmission timeout: 300 ms
            Round trip time: Smoothed 7 ms, Variance: 13
            Advertized window: Current: 256 KB, Maximum: 257 KB, Scale: 3
            Peer receive window: Current: 9159 KB, Maximum: 9159 KB, Scale: 8
            Congestion window: Current: 11 KB
        Target: clariion
          Statistics:
            PDU: Command: 101, Response: 101
            Bytes: TX: 14828, RX: 0
            Number of connection: 1
          TCP parameters
            Local 10.48.69.199:3260, Remote 10.48.69.235:32799
            Path MTU: 1500 bytes
            Retransmission timeout: 300 ms
            Round trip time: Smoothed 2 ms, Variance: 1
            Advertised window: Current: 256 KB, Maximum: 257 KB, Scale: 3
            Peer receive window: Current: 9159 KB, Maximum: 9159 KB, Scale: 8
            Congestion window: Current: 11 KB

      FCP Session details
        Target FCID: 0x7000e8 (S_ID of this session: 0x700100)
          pWWN: 21:00:00:20:37:67:f7:a2, nWWN: 20:00:00:20:37:67:f7:a2
          Session state: LOGGED_IN
          1 iSCSI sessions share this FC session
            Target: san-fc-jbod-1
          Negotiated parameters
            RcvDataFieldSize 2048 our_RcvDataFieldSize 2048
            MaxBurstSize 0, EMPD: FALSE
            Random Relative Offset: FALSE, Sequence-in-order: Yes
          Statistics:
            PDU: Command: 0, Response: 24
        Target FCID: 0x700103 (S_ID of this session: 0x700100)
          pWWN: 50:06:01:60:88:02:a8:2b, nWWN: 50:06:01:60:11:02:a8:2b
          Session state: LOGGED_IN
          2 iSCSI sessions share this FC session
            Target: clariion-lun-3-4-5
            Target: clariion
          Negotiated parameters
            RcvDataFieldSize 1024 our_RcvDataFieldSize 2048
            MaxBurstSize 0, EMPD: FALSE
            Random Relative Offset: FALSE, Sequence-in-order: Yes
          Statistics:
            PDU: Command: 0, Response: 174

canterbury#show iscsi initiator iscsi-session detail

iSCSI Node name is 10.48.69.235
    iSCSI Initiator name: iqn.1987-05.com.cisco:01.894b196796e7
    iSCSI alias name: baboon
    Node WWN is 21:01:00:0c:30:6c:24:42 (dynamic)
    Member of vsans: 777
    Number of Virtual n_ports: 1

    Virtual Port WWN is 21:02:00:0c:30:6c:24:42 (dynamic)
      Interface iSCSI 2/1, Portal group tag is 0x80
      VSAN ID 777, FCID 0x700100
      2 FC sessions, 3 iSCSI sessions
      iSCSI session details
        Target: san-fc-jbod-1
          Statistics:
            PDU: Command: 24, Response: 24
            Bytes: TX: 3504, RX: 0
            Number of connection: 1
          TCP parameters
            Local 10.48.69.199:3260, Remote 10.48.69.235:32798
            Path MTU: 1500 bytes
            Retransmission timeout: 300 ms
            Round trip time: Smoothed 4 ms, Variance: 6
            Advertized window: Current: 256 KB, Maximum: 257 KB, Scale: 3
            Peer receive window: Current: 9159 KB, Maximum: 9159 KB, Scale: 8
            Congestion window: Current: 11 KB
        Target: clariion-lun-3-4-5
          Statistics:
            PDU: Command: 73, Response: 73
            Bytes: TX: 9740, RX: 0
            Number of connection: 1
          TCP parameters
            Local 10.48.69.199:3260, Remote 10.48.69.235:32801
            Path MTU: 1500 bytes
            Retransmission timeout: 300 ms
            Round trip time: Smoothed 7 ms, Variance: 13
            Advertized window: Current: 256 KB, Maximum: 257 KB, Scale: 3
            Peer receive window: Current: 9159 KB, Maximum: 9159 KB, Scale: 8
            Congestion window: Current: 11 KB
        Target: clariion
          Statistics:
            PDU: Command: 101, Response: 101
            Bytes: TX: 14828, RX: 0
            Number of connection: 1
          TCP parameters
            Local 10.48.69.199:3260, Remote 10.48.69.235:32799
            Path MTU: 1500 bytes
            Retransmission timeout: 300 ms
            Round trip time: Smoothed 2 ms, Variance: 1
            Advertized window: Current: 256 KB, Maximum: 257 KB, Scale: 3
            Peer receive window: Current: 9159 KB, Maximum: 9159 KB, Scale: 8
            Congestion window: Current: 11 KB

canterbury#show iscsi initiator fcp-session detail

iSCSI Node name is 10.48.69.235
    iSCSI Initiator name: iqn.1987-05.com.cisco:01.894b196796e7
    iSCSI alias name: baboon
    Node WWN is 21:01:00:0c:30:6c:24:42 (dynamic)
    Member of vsans: 777
    Number of Virtual n_ports: 1

    Virtual Port WWN is 21:02:00:0c:30:6c:24:42 (dynamic)
      Interface iSCSI 2/1, Portal group tag is 0x80
      VSAN ID 777, FCID 0x700100
      2 FC sessions, 3 iSCSI sessions

      FCP Session details
        Target FCID: 0x7000e8 (S_ID of this session: 0x700100)
          pWWN: 21:00:00:20:37:67:f7:a2, nWWN: 20:00:00:20:37:67:f7:a2
          Session state: LOGGED_IN
          1 iSCSI sessions share this FC session
            Target: san-fc-jbod-1
          Negotiated parameters
            RcvDataFieldSize 2048 our_RcvDataFieldSize 2048
            MaxBurstSize 0, EMPD: FALSE
            Random Relative Offset: FALSE, Sequence-in-order: Yes
          Statistics:
            PDU: Command: 0, Response: 24
        Target FCID: 0x700103 (S_ID of this session: 0x700100)
          pWWN: 50:06:01:60:88:02:a8:2b, nWWN: 50:06:01:60:11:02:a8:2b
          Session state: LOGGED_IN
          2 iSCSI sessions share this FC session
            Target: clariion-lun-3-4-5
            Target: clariion
          Negotiated parameters
            RcvDataFieldSize 1024 our_RcvDataFieldSize 2048
            MaxBurstSize 0, EMPD: FALSE
            Random Relative Offset: FALSE, Sequence-in-order: Yes
          Statistics:
            PDU: Command: 0, Response: 174

canterbury#show ips stats tcp interface gigabitethernet 2/1 detail

TCP Statistics for port GigabitEthernet2/1
    TCP send stats
      28621 segments, 4231096 bytes
      15842 data, 12335 ack only packets
      168 control (SYN/FIN/RST), 0 probes, 210 window updates
      66 segments retransmitted, 63724 bytes
      66 retransmitted while on ethernet send queue, 1127 packets split
      480 delayed acks sent
    TCP receive stats
      36728 segments, 12911 data packets in sequence, 2668162 bytes in sequence
      0 predicted ack, 12050 predicted data
      0 bad checksum, 0 multi/broadcast, 0 bad offset
      0 no memory drops, 0 short segments
      48 duplicate bytes, 1 duplicate packets
      0 partial duplicate bytes, 0 partial duplicate packets
      0 out-of-order bytes, 164 out-of-order packets
      0 packet after window, 0 bytes after window
      0 packets after close
      12621 acks, 3486850 ack bytes, 0 ack toomuch, 11652 duplicate acks
      0 ack packets left of snd_una, 6 non-4 byte aligned packets
      8333 window updates, 0 window probe
      624 pcb hash miss, 79 no port, 0 bad SYN, 0 paws drops
    TCP Connection Stats
      0 attempts, 231 accepts, 231 established
      227 closed, 14 drops, 0 conn drops
      0 drop in retransmit timeout, 2 drop in keepalive timeout
      0 drop in persist drops, 0 connections drained
    TCP Miscellaneous Stats
      11761 segments timed, 12027 rtt updated
      51 retransmit timeout, 304 persist timeout
      10452 keepalive timeout, 10450 keepalive probes
    TCP SACK Stats
      0 recovery episodes, 0 data packets, 0 data bytes
      0 data packets retransmitted, 0 data bytes retransmitted
      0 connections closed, 0 retransmit timeouts
    TCP SYN Cache Stats
      233 entries, 231 connections completed, 1 entries timed out
      0 dropped due to overflow, 1 dropped due to RST
      0 dropped due to ICMP unreach, 0 dropped due to bucket overflow
      0 abort due to no memory, 4 duplicate SYN, 76 no-route SYN drop
      0 hash collisions, 0 retransmitted

    TCP Active Connections
      Local  Address        Remote Address        State      Send-Q   Recv-Q
      10.48.69.199:3260     10.48.69.235:32798    ESTABLISH  0        0
      10.48.69.199:3260     10.48.69.235:32799    ESTABLISH  0        0
      10.48.69.199:3260     10.48.69.235:32800    ESTABLISH  0        0
      10.48.69.199:3260     10.48.69.235:32801    ESTABLISH  0        0
      0.0.0.0:3260          0.0.0.0:0             LISTEN     0        0

canterbury#show iscsi virtual-target configured

target: san-fc-jbod-1
  * Port WWN 21:00:00:20:37:67:f7:a2

!--- The * means that you have both discovery and target sessions. !--- You only have a discovery session if there is no * in front of the pWWN.

    Configured node
    No. of advertised interface: 1
      GigabitEthernet 2/1
    No. of initiators permitted: 3
      initiator iqn.1987-05.com.cisco.02.89451e183581.mcandege-w2k1 is permitted
      initiator 10.48.69.235/32 is permitted
      initiator 10.48.69.232/32 is permitted
    all initiator permit is disabled

target: clariion
  * Port WWN 50:06:01:60:88:02:a8:2b
    Configured node
    No. of LU mapping: 3
      iSCSI LUN: 0000, FC LUN: 0000
      iSCSI LUN: 0001, FC LUN: 0001
      iSCSI LUN: 0002, FC LUN: 0002
    No. of advertised interface: 1
      GigabitEthernet 2/1
    No. of initiators permitted: 1
      initiator 10.48.69.235/32 is permitted
    all initiator permit is disabled

target: clariion-lun-3-4-5
  * Port WWN 50:06:01:60:88:02:a8:2b
    Configured node
    No. of LU mapping: 3
      iSCSI LUN: 0003, FC LUN: 0003
      iSCSI LUN: 0004, FC LUN: 0004
      iSCSI LUN: 0005, FC LUN: 0005
    No. of advertised interface: 1
      GigabitEthernet 2/1
    No. of initiators permitted: 1
      initiator 10.48.69.235/32 is permitted
    all initiator permit is disabled

canterbury#show iscsi initiator configured 

iSCSI Node name is 10.48.69.235
    Member of vsans: 777

canterbury#show ips arp interface gigabitethernet 2/1

Protocol         Address   Age (min)   Hardware Addr  Type   Interface
Internet    10.48.69.200        0     0008.e21e.c7bc  ARPA  GigabitEthernet2/1
Internet    10.48.69.206        7     0005.9ba6.95ff  ARPA  GigabitEthernet2/1
Internet    10.48.69.209        4     0009.7c60.561f  ARPA  GigabitEthernet2/1
Internet    10.48.69.226        0     0060.08f6.bc1a  ARPA  GigabitEthernet2/1
Internet    10.48.69.229       15     0800.209e.edab  ARPA  GigabitEthernet2/1
Internet    10.48.69.233        0     0010.4200.7d5b  ARPA  GigabitEthernet2/1
Internet    10.48.69.235        9     0800.20b6.6559  ARPA  GigabitEthernet2/1
Internet    10.48.69.238        5     0030.6e1b.6f51  ARPA  GigabitEthernet2/1
Internet    10.48.69.239       12     0030.6e1c.a00b  ARPA  GigabitEthernet2/1
Internet    10.48.69.248        5     0202.3d30.45f8  ARPA  GigabitEthernet2/1
Internet    10.48.69.252        1     0202.3d30.45fc  ARPA  GigabitEthernet2/1
Internet      10.10.2.28        9     0202.3d0a.021c  ARPA  GigabitEthernet2/1

canterbury#show scsi-target devices vsan 777

--------------------------------------------------------------------------------
VSAN    FCID        PWWN                      VENDOR    MODEL             REV
--------------------------------------------------------------------------------
777     0x7000e8    21:00:00:20:37:67:f7:a2   SEAGATE   ST318203FC        0004
777     0x700103    50:06:01:60:88:02:a8:2b   DGC       RAID 0            0632

canterbury#show scsi-target lun vsan 777

- ST318203FC from SEAGATE (Rev 0004)
  FCID is 0x7000e8 in VSAN 777, PWWN is 21:00:00:20:37:67:f7:a2
  ------------------------------------------------------------------------------
  LUN    Capacity  Status  Serial Number    Device-Id
         (MB)
  ------------------------------------------------------------------------------
  0x0    18210     Online  LRE8091500007039 C:1 A:0 T:3 20:00:00:20:37:67:f7:a2
- RAID from DGC (Rev 0632)
  FCID is 0x700103 in VSAN 777, PWWN is 50:06:01:60:88:02:a8:2b
  ------------------------------------------------------------------------------
  LUN    Capacity  Status  Serial Number    Device-Id
         (MB)
  ------------------------------------------------------------------------------
  0x0    1074      Online  f60004202091     C:1 A:0 T:3 60:06:01:60:88:02:a8:2b
                                                        da:05:b6:a9:b6:9d:7b:00
                                            C:1 A:0 T:0 00:00:00:00
  0x1    1074      Online  f60004202091     C:1 A:0 T:3 60:06:01:60:88:02:a8:2b
                                                        6a:66:0d:74:cb:33:88:6c
                                            C:1 A:0 T:0 00:01:00:00
  0x2    1074      Online  f60004202091     C:1 A:0 T:3 60:06:01:60:88:02:a8:2b
                                                        ec:81:5b:a2:c4:43:0d:8a
                                            C:1 A:0 T:0 00:02:00:00
  0x3    2147      Online  f60004202091     C:1 A:0 T:3 60:06:01:60:88:02:a8:2b
                                                        e0:47:b3:be:3b:00:e0:d5
                                            C:1 A:0 T:0 00:03:00:00
  0x4    1074      Online  f60004202091     C:1 A:0 T:3 60:06:01:60:88:02:a8:2b
                                                        00:51:5b:7f:3d:9a:7b:ce
                                            C:1 A:0 T:0 00:04:00:00
  0x5    1074      Online  f60004202091     C:1 A:0 T:3 60:06:01:60:88:02:a8:2b
                                                        ab:b1:ae:80:59:c0:fc:f0
                                            C:1 A:0 T:0 00:05:00:00
  0x6    1074      Online  f60004202091     C:1 A:0 T:3 60:06:01:60:88:02:a8:2b
                                                        ad:91:58:af:d2:fd:c7:47
                                            C:1 A:0 T:0 00:06:00:00
  0x7    1074      Online  f60004202091     C:1 A:0 T:3 60:06:01:60:88:02:a8:2b
                                                        b1:ef:e7:6c:44:5c:16:97
                                            C:1 A:0 T:0 00:07:00:00
  0x8    1074      Online  f60004202091     C:1 A:0 T:3 60:06:01:60:88:02:a8:2b
                                                        84:4f:09:60:30:1e:fc:50
                                            C:1 A:0 T:0 00:08:00:00
  0x9    1074      Online  f60004202091     C:1 A:0 T:3 60:06:01:60:88:02:a8:2b
                                                        aa:6d:e2:0e:ce:7a:cc:21
                                            C:1 A:0 T:0 00:09:00:00
  0xa    1074      Online  f60004202091     C:1 A:0 T:3 60:06:01:60:88:02:a8:2b
                                                        5b:66:67:89:6c:f2:d1:56
                                            C:1 A:0 T:0 00:0a:00:00
  0xb    1074      Online  f60004202091     C:1 A:0 T:3 60:06:01:60:88:02:a8:2b
                                                        a9:32:bd:04:4a:bb:3d:9b
                                            C:1 A:0 T:0 00:0b:00:00
  0xc    1074      Online  f60004202091     C:1 A:0 T:3 60:06:01:60:88:02:a8:2b
                                                        cd:d9:96:f7:57:3f:07:0c
                                            C:1 A:0 T:0 00:0c:00:00
  0xd    1074      Online  f60004202091     C:1 A:0 T:3 60:06:01:60:88:02:a8:2b
                                                        0c:e5:ba:39:68:ca:d6:f0
                                            C:1 A:0 T:0 00:0d:00:00
  0xe    1074      Online  f60004202091     C:1 A:0 T:3 60:06:01:60:88:02:a8:2b
                                                        60:6e:ee:76:98:fc:ab:97
                                            C:1 A:0 T:0 00:0e:00:00
  0xf    1074      Online  f60004202091     C:1 A:0 T:3 60:06:01:60:88:02:a8:2b
                                                        8b:58:80:7b:12:fb:6b:12
                                            C:1 A:0 T:0 00:0f:00:00
  0x10   1074      Online  f60004202091     C:1 A:0 T:3 60:06:01:60:88:02:a8:2b
                                                        a1:2f:6d:b0:c3:d6:c2:46
                                            C:1 A:0 T:0 00:10:00:00
  0x11   1074      Online  f60004202091     C:1 A:0 T:3 60:06:01:60:88:02:a8:2b
                                                        2c:48:c4:74:25:4b:26:dd
                                            C:1 A:0 T:0 00:11:00:00
  0x20   5369      Online  f60004202091     C:1 A:0 T:3 60:06:01:60:88:02:a8:2b
                                                        ba:18:6a:40:22:40:94:75
                                            C:1 A:0 T:0 00:20:00:00
  0x21   3221      Online  f60004202091     C:1 A:0 T:3 60:06:01:60:88:02:a8:2b
                                                        74:d2:42:9e:31:8d:ff:86
                                            C:1 A:0 T:0 00:21:00:00

canterbury#show interface iscsi 2/1

iscsi2/1 is up
    Hardware is GigabitEthernet
    Port WWN is 20:41:00:0c:30:6c:24:40
    Admin port mode is ISCSI
    Port mode is ISCSI
    Speed is 1 Gbps
    iSCSI initiator is identified by name
    Number of iSCSI session: 4, Number of TCP connection: 4
    Configured TCP parameters
        Local Port is 3260
        PMTU discover is enabled, reset timeout is 3600 sec
        Keepalive-timeout is 60 sec
        Minimum-retransmit-time is 300 ms
        Max-retransmissions 4
        Sack is disabled
        Maximum allowed bandwidth is 800000 kbps
        Minimum available bandwidth is 800000 kbps
        Estimated round trip time is 100000 usec
    5 minutes input rate 168 bits/sec, 21 bytes/sec, 0 frames/sec
    5 minutes output rate 728 bits/sec, 91 bytes/sec, 0 frames/sec
    iSCSI statistics
      Input 12209 packets, 2668348 bytes
        Command 3282 pdus, Data-out 1038 pdus, 1989664 bytes
      Output 14762 packets, 3486596 bytes
        Response 3059 pdus (with sense 77), R2T 153 pdus
        Data-in 3215 pdus, 2744116 bytes

canterbury#show iscsi stats iscsi 2/1

iscsi2/1
    5 minutes input rate 168 bits/sec, 21 bytes/sec, 0 frames/sec
    5 minutes output rate 728 bits/sec, 91 bytes/sec, 0 frames/sec
    iSCSI statistics
      12209 packets input, 2668348 bytes
        Command 3282 pdus, Data-out 1038 pdus, 1989664 bytes, 0 fragments
      output 14762 packets, 3486596 bytes
        Response 3059 pdus (with sense 77), R2T 153 pdus
        Data-in 3215 pdus, 2744116 bytes

canterbury#show interface gigabitethernet 2/1

GigabitEthernet2/1 is up
    Hardware is GigabitEthernet, address is 0005.3000.ade6
    Internet address is 10.48.69.199/26
    MTU 2156  bytes
    Port mode is IPS
    Speed is 1 Gbps
    Beacon is turned off
    Auto-Negotiation is turned on
    iSCSI authentication: NONE
    5 minutes input rate 392 bits/sec, 49 bytes/sec, 0 frames/sec
    5 minutes output rate 64 bits/sec, 8 bytes/sec, 0 frames/sec
    126128 packets input, 12476013 bytes
      2 multicast frames, 0 compressed
      0 input errors, 0 frame, 0 overrun 0 fifo
    43443 packets output, 6256174 bytes, 0 underruns
      0 output errors, 0 collisions, 0 fifo
      0 carrier errors

canterbury#show ip route

Codes: C - connected, S - static

Gateway of last resort is 10.48.69.129

C 10.48.69.192/26 is directly connected, gigabitethernet2-1
C 10.48.69.128/26 is directly connected, mgmt0

Output di Fabric Manager e Device Manager

In questa sezione vengono forniti output di esempio da MDS Fabric Manager 1.1(2) e Device Manager 1.1(2).

Diagramma topologico da Fabric Manager

sn5428_solaris_2.gif

Questa è una schermata di esempio della visualizzazione di Device Manager 1.1(2) su canterbury.

sn5428_solaris_3.gif

  1. Selezionare FC > LUN nella finestra Gestione periferiche per visualizzare i nomi WWN, gli ID delle LUN e la capacità delle LUN.

    sn5428_solaris_4.gif

  2. Selezionare IP > iSCSI per visualizzare le sessioni iSCSI.

    sn5428_solaris_5.gif

Informazioni correlate

Cronologia delle revisioni

Revisione Data di pubblicazione Commenti
1.0
08-Oct-2018
Versione iniziale

Questo documento ti è stato utile?

FeedbackFeedback

Contattaci