¿Tiene una cuenta?

  •   Contenido personalizado
  •   Sus productos y soporte

¿Necesita una cuenta?

Crear una cuenta

La guía de referencia rápida para recoger TAC pidió las salidas del Switches del nexo

Opciones de descarga

  • PDF     (84.6 KB)
    Visualice con Adobe Reader en una variedad de dispositivos
  • ePub     (76.9 KB)
    Visualice en diferentes aplicaciones en iPhone, iPad, Android, Sony Reader o Windows Phone
  • Mobi (Kindle)     (77.4 KB)
    Visualice en dispositivo Kindle o aplicación Kindle en múltiples dispositivos
Actualizado:8 de febrero de 2019
ID del documento:214107
Acerca de la traducción

Acerca de esta traducción

Cisco ha traducido este documento combinando la traducción automática y los recursos humanos a fin de ofrecer a nuestros usuarios en todo el mundo contenido en su propio idioma. Tenga en cuenta que incluso la mejor traducción automática podría no ser tan precisa como la proporcionada por un traductor profesional. Cisco Systems, Inc. no asume ninguna responsabilidad por la precisión de estas traducciones y recomienda remitirse siempre al documento original escrito en inglés (insertar vínculo URL).

    Introducción

     Este documento enumera el conjunto de comandos genérico para recoger del durante/después del Switches del nexo de un problema para los casos de TAC.

    El comando list puede ser pegado al conmutador cli exactamente según lo enumerado sin ningunos cambios. Ciertos comandos pueden error hacia fuera si las características correspondientes no se ejecutan. Éste es resultado previsto y no causará ningunos problemas.

    Si usted dinámico ha asociado una tecnología de la demostración al caso de TAC entonces usted puede ignorar el abajo enumera.

    Nexo 3000

    El comando list puede ser pegado al conmutador cli exactamente según lo enumerado sin ningunos cambios. $ (SWITCHNAME) será substituido automáticamente por el hostname.

    echo 'show clock' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show clock >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show inventory' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show inventory >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show version' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show version >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show module' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show module >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show run' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show run >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show logging log' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show logging log >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show log nvram' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show log nvram >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show accounting log' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show accounting log >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show cdp nei' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show cdp nei >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show lldp nei' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show lldp nei >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show copp status' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show copp status >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show policy-map interface control-plane' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show policy-map interface control-plane >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show hardware rate-limiter' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show hardware rate-limiter >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show system reset-reason' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show system reset-reason >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show span summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show span summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show vpc' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show vpc >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show int status' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show int status >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show port-channel summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show port-channel summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip int bri vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip int bri vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show cores' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show cores >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show diagnostic result mod all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show diagnostic result mod all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip route vrf all summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip route vrf all summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show mac address-table count' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show mac address-table count >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show vlan summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show vlan summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show module internal exceptionlog' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show module internal exceptionlog >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show processes cpu history' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show processes cpu history >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show processes memory sort' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show processes memory sort >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show interface counters errors' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show interface counters errors >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show fex' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show fex >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show license usage' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show license usage >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip eigrp neighbor vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip eigrp neighbor vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip ospf neighbor vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip ospf neighbor vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip bgp vpnv4 vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip bgp vpnv4 vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'dir logflash:' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; dir logflash: >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt

    !zip the file
    gzip $(SWITCHNAME)_cmds_for_tac_case.txt

    Nexo 5000/6000

    echo 'show clock' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show clock >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show inventory' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show inventory >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show version' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show version >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show module' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show module >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show run' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show run >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show logging log' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show logging log >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show log nvram' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show log nvram >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show accounting log' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show accounting log >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show cdp nei' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show cdp nei >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show lldp nei' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show lldp nei >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show copp status' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show copp status >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show policy-map interface control-plane' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show policy-map interface control-plane >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show hardware rate-limiter' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show hardware rate-limiter >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show system reset-reason' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show system reset-reason >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show span summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show span summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show vpc' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show vpc >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show int status' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show int status >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show port-channel summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show port-channel summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip int bri vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip int bri vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show cores' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show cores >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show diagnostic result mod all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show diagnostic result mod all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip route vrf all summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip route vrf all summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show mac address-table count' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show mac address-table count >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show vlan summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show vlan summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show module internal exceptionlog' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show module internal exceptionlog >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show processes cpu history' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show processes cpu history >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show processes memory sort' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show processes memory sort >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show interface counters errors' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show interface counters errors >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show fex' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show fex >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show license usage' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show license usage >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip eigrp neighbor vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip eigrp neighbor vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip ospf neighbor vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip ospf neighbor vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip bgp vpnv4 vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip bgp vpnv4 vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'dir logflash:' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; dir logflash: >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt

    !zip the file
    gzip $(SWITCHNAME)_cmds_for_tac_case.txt

    Nexo 7000

    ! RECOJA ESTAS SALIDAS DEL ADMIN VDC Y EL VDC EN LA PREGUNTA.

    echo 'show clock' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show clock >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show inventory' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show inventory >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show version' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show version >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show module' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show module >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show run' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show run >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show logging log' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show logging log >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show log nvram' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show log nvram >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show accounting log' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show accounting log >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show cdp nei' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show cdp nei >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show lldp nei' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show lldp nei >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show copp status' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show copp status >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show policy-map interface control-plane' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show policy-map interface control-plane >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show hardware rate-limiter' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show hardware rate-limiter >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show system reset-reason' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show system reset-reason >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show span summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show span summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show vpc' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show vpc >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show int status' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show int status >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show port-channel summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show port-channel summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip int bri vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip int bri vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show cores' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show cores >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show diagnostic result mod all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show diagnostic result mod all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip route vrf all summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip route vrf all summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show mac address-table count' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show mac address-table count >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show vlan summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show vlan summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show module internal exceptionlog' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show module internal exceptionlog >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show processes cpu history' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show processes cpu history >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show processes memory sort' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show processes memory sort >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show interface counters errors' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show interface counters errors >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show fex' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show fex >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show license usage' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show license usage >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip eigrp neighbor vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip eigrp neighbor vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip ospf neighbor vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip ospf neighbor vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip bgp vpnv4 vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip bgp vpnv4 vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'dir logflash:' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; dir logflash: >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show vdc' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show vdc >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt

    !zip the file

    gzip $(SWITCHNAME)_cmds_for_tac_case.txt

    Nexo 9000

    echo 'show clock' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show clock >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show inventory' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show inventory >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show version' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show version >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show module' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show module >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show run' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show run >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show logging log' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show logging log >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show log nvram' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show log nvram >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show accounting log' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show accounting log >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show cdp nei' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show cdp nei >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show lldp nei' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show lldp nei >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show copp status' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show copp status >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show policy-map interface control-plane' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show policy-map interface control-plane >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show hardware rate-limiter' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show hardware rate-limiter >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show system reset-reason' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show system reset-reason >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show span summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show span summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show vpc' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show vpc >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show int status' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show int status >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show port-channel summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show port-channel summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip int bri vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip int bri vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show cores' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show cores >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show diagnostic result mod all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show diagnostic result mod all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip route vrf all summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip route vrf all summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show mac address-table count' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show mac address-table count >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show vlan summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show vlan summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show module internal exceptionlog' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show module internal exceptionlog >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show processes cpu history' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show processes cpu history >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show processes memory sort' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show processes memory sort >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show interface counters errors' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show interface counters errors >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show fex' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show fex >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show license usage' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show license usage >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip eigrp neighbor vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip eigrp neighbor vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip ospf neighbor vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip ospf neighbor vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip bgp vpnv4 vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip bgp vpnv4 vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'dir logflash:' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; dir logflash: >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt

    !zip the file

    gzip $(SWITCHNAME)_cmds_for_tac_case.txt

    ¿Resultó útil este documento?

    FeedbackComentarios

    Contacte a Cisco

    Discusiones relacionadas con la comunidad de Cisco

    Este documento se aplica a estos productos

    Acerca de Cisco
    Contáctenos
    Trabaje con Nosotros